Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC SURFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

MECHANISM OF SPONTANEOUS FORMATION OF STABLE MAGNETIC STRUCTURES ON THE SUN

One of the puzzling features of solar magnetism is formation of long-living compact magnetic structures, such as sunspots and pores, in the highly turbulent upper layer of the solar convective zone. We use realistic radiative three-dimensional MHD simulations to investigate the interaction between magnetic field and turbulent convection. In the simulations, a weak vertical uniform magnetic field is imposed in a region of fully developed granular convection, and the total magnetic flux through the top and bottom boundaries is kept constant. The simulation results reveal a process of spontaneous formation of stable magnetic structures, which may be a key to understanding the magnetic self-organization on the Sun and formation of pores and sunspots. This process consists of two basic steps: (1) formation of small-scale filamentary magnetic structures associated with concentrations of vorticity and whirlpool-type motions, and (2) merging of these structures due to the vortex attraction, caused by converging downdrafts around magnetic concentration below the surface. In the resulting large-scale structure maintained by the converging plasma motions, the magnetic field strength reaches {approx}1.5 kG at the surface and {approx}6 kG in the interior, and the surface structure resembles solar pores. The magnetic structure remains stable for the whole simulation run of several hours with no sign of decay.

79 ASTRONOMY AND ASTROPHYSICS↗

SIMULATION OF THE FORMATION OF A SOLAR ACTIVE REGION

We present a radiative magnetohydrodynamics simulation of the formation of an active region (AR) on the solar surface. The simulation models the rise of a buoyant magnetic flux bundle from a depth of 7.5 Mm in the convection zone up into the solar photosphere. The rise of the magnetic plasma in the convection zone is accompanied by predominantly horizontal expansion. Such an expansion leads to a scaling relation between the plasma density and the magnetic field strength such that B {proportional_to} rhov{sup 1/2}. The emergence of magnetic flux into the photosphere appears as a complex magnetic pattern, which results from the interaction of the rising magnetic field with the turbulent convective flows. Small-scale magnetic elements at the surface first appear, followed by their gradual coalescence into larger magnetic concentrations, which eventually results in the formation of a pair of opposite polarity spots. Although the mean flow pattern in the vicinity of the developing spots is directed radially outward, correlations between the magnetic field and velocity field fluctuations allow the spots to accumulate flux. Such correlations result from the Lorentz-force-driven, counterstreaming motion of opposite polarity fragments. The formation of the simulated AR is accompanied by transient light bridges between umbrae and umbral dots. Together with recent sunspot modeling, this work highlights the common magnetoconvective origin of umbral dots, light bridges, and penumbral filaments.

30 DIRECT ENERGY CONVERSION↗

Magnetorheological materials, method for making, and applications thereof

A magnetorheological material comprises a magnetic particle and a ceramic material, wherein the magnetorheological material is in a dried form and further wherein a portion of the ceramic material is in the form of a nanocrystalline coating over the entire exterior surface of the magnetic particle and another portion of the ceramic material is in the form of a free nanocrystal. A magnetorheological material comprises a magnetic particle having a ceramic material coating over an external surface thereof as a result of a coating process, and a free nanocrystal of the ceramic material in the form of a residual by-product of the coating process. A sol-gel process for making a magnetorheological product comprises providing a sol of a desired ceramic coating material; combining a desired quantity of carbonyl iron (CI) particles with the sol to coat the CI particles with the ceramic coating material; creating a resulting quantity of nanocrystalline ceramic material-coated CI particles and a quantity of free nanocrystals of the ceramic material; and, drying the resulting quantity of coated CI particles and free nanocrystals to a moisture content equal to or less than 2 wt %.

36 MATERIALS SCIENCE↗

Contributions from geomagnetic inverse theory to the study of hydromagnetic conditions near the core-mantle boundary

The Final Report on contributions from geomagnetic inverse theory to the study of hydromagnetic conditions near the core-mantle boundary (CMB) is presented. The original proposal was to study five questions concerning what the surface and satellite magnetic data imply about hydromagnetic and electromagnetic conditions near the CMB. The five questions are: (1) what do the surface and satellite data imply about the geomagnetic field B near the surface of the earth; (2) how does one extrapolate B down through the conducting mantle to the CMB; (3) if B on the CMB is visible, how accurately does it satisfy the frozen-flux approximation; (4) if frozen flux is a good approximation on the CMB, what can be inferred about the fluid velocity v in the upper core; and (5) if v at the CMB is visible, does it suggest any dynamical properties of the core, such as vertical advection, Alfven-inertial waves, link instabilities, or mantle effects. A summary of the research is provided.

Backus, George E.↗

Magnetic and nonthermal effects on the dispersion properties of ion-cyclotron surface wave in a semi-bounded generalized Lorentzian plasma

The magnetic field strength and the nonthermal effects on the dispersion properties of ion-cyclotron surface wave propagating along the interface of a semi-bounded Lorentzian plasma and a vacuum are kinetically investigated. The direction of external magnetic field is applied in parallel to the interface. By employing the specular reflection boundary condition, the dispersion relation of the ion-cyclotron surface wave is derived in the long wavelength limit. The result shows that the phase velocity of the ion-cyclotron surface wave decreases with an increase of the strength of magnetic field. It is found that the increase of suprathermal particle population suppresses the phase velocity of the surface wave. In addition, it is found that the wave velocity increases with increasing ion mass in a semi-bounded Lorentzian plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gyrokinetic study of collisional resonant magnetic perturbation (RMP)-driven plasma density and heat transport in tokamak edge plasma using a magnetohydrodynamic screened RMP field

The total-f gyrokinetic particle-in-cell code XGC is applied to study various aspects of collisional transport in the tokamak edge pedestal in the presence of resonant magnetic perturbations (RMPs) calculated with M3D-C1. Simulations including the separatrix and scrape-off layer are exercised for a model DIII-D H-mode plasma. Neutral particle recycling is modeled by means of ionization and charge exchange with the plasma. A fully nonlinear Fokker–Planck collision operator is utilized to account for non-Maxwellian edge plasma. Here, the study yields kinetic evidence that (i) neglecting the non-axisymmetric component of the RMP-generated electrostatic potential perturbation could yield a fictitiously high particle pump-out rate in the edge pedestal; that (ii) the experimental level of particle pump-out from the pedestal cannot be provided by collisional transport across Kolmogorov–Arnold–Moser surfaces except across the magnetic separatrix where stochastic magnetic field lines exist; that (iii) the H-mode type electron heat barrier is retained in the steep slope area under the M3D-C1 calculated RMPs; and that (iv) the stochastic electron heat-transport rate around the magnetic separatrix surface is much lower than the prediction by Rechester–Rosenbluth (1978 Phys. Rev. Lett. 40 38–41) and is qualitatively consistent with the experimentally observed rate. Detailed kinetic physics analysis on how the transport fluxes, electrostatic potential perturbation, and -well structure respond to onset of RMPs is also reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Canonicalization and symplectic simulation of the gyrocenter dynamics in time-independent magnetic fields

The gyrocenter dynamics of charged particles in time-independent magnetic fields is a non-canonical Hamiltonian system. The canonical description of the gyrocenter has both theoretical and practical importance. We provide a general procedure of the gyrocenter canonicalization, which is expressed by the series of a small variable ϵ depending only on the parallel velocity u and can be expressed in a recursive manner. We prove that the truncation of the series to any given order generates a set of exact canonical coordinates for a system, whose Lagrangian approximates to that of the original gyrocenter system in the same order. If flux surfaces exist for the magnetic field, the series stops simply at the second order and an exact canonical form of the gyrocenter system is obtained. With the canonicalization schemes, the canonical symplectic simulation of gyrocenter dynamics is realized for the first time. The canonical symplectic algorithm has the advantage of good conservation properties and long-term numerical accuracy, while avoiding numerical instability. It is worth mentioning that explicitly expressing the canonical Hamiltonian in new coordinates is usually difficult and impractical. We give an iteration procedure that is easy to implement in the original coordinates associated with the coordinate transformation. This is crucial for modern large-scale simulation studies in plasma physics. The dynamics of gyrocenters in the dipole magnetic field and in the toroidal geometry are simulated using the canonical symplectic algorithm by comparison with the higher-order non symplectic Runge-Kutta scheme. The overwhelming superiorities of the symplectic method for the gyrocenter system are evidently exhibited.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic impurity as a local probe of the $U(1)$ quantum spin liquid with spinon Fermi surface

We solve the problem of a magnetic impurity coupled to a U(1) quantum spin liquid with a spinon Fermi surface, and we compute the impurity spectral function. Using the slave rotor mean-field approach combined with gauge field fluctuations, we find that a peak located at the top of the lower Hubbard band and one at the bottom of the upper Hubbard band can emerge in the impurity spectral function. The peaks at the Hubbard band edges arise from the gauge field fluctuation-induced spinon-chargon binding inside the spinon Kondo screening cloud of the magnetic impurity. For a magnetic impurity embedded in a Mott insulator, our findings suggest that the emergence of a pair of peaks at the Hubbard band edges in the impurity density of states spectra provides strong evidence that the host Mott insulator is a U(1) quantum spin liquid with a spinon Fermi surface.

36 MATERIALS SCIENCE↗

Ring cusp/hollow cathode discharge chamber performance studies

An experimental study was performed to determine the effects of hollow cathode position, anode position, and ring cusp magnetic field configuration and strength on discharge chamber performance. The results are presented in terms of comparative plasma ion energy cost, extracted ion fraction, and beam profile data. Such comparisons are used to demonstrate whether changes in performance are caused by changes in the loss rate of primary electrons to the anode or the loss rate of ions to discharge chamber walls or cathode and anode surfaces. Results show: (1) the rate of primary electron loss to the anode decreases as the anode is moved downstream of the ring cusp toward the screen grid; (2) the loss rate of ions to hollow cathode surfaces are excessive if the cathode is located upstream of a point of peak magnetic flux density at the discharge chamber centerline; and (3) the fraction of the ions produced that are lost to discharge chamber walls and ring magnet surfaces is reduced by positioning of the magnet rings so the plasma density is uniform over the grid surface, and adjusting their strength to a level where it is sufficient to prevent excessive ion losses by Bohm diffusion.

Vaughn, J. A.↗

Ring cusp/hollow cathode discharge chamber performance studies

An experimental study performed to determine the effects of hollow cathode position, anode position, and ring cusp magnetic field configuration and strength on discharge chamber performance is described. The results are presented in terms of comparative plasma ion energy cost, extracted ion fraction, and beam profile data. Results show that the rate of primary electron loss to the anode decreases as the anode is moved downstream of the ring cusp toward the screen grid and that the loss rate of ions to hollow cathode surfaces are excessive if the cathode is located upstream of a point of peak magnetic flux density at the discharge chamber centerline. Moreover, the fraction of the ions produced that are lost to discharge chamber walls and ring magnet surfaces is reduced by positioning of the magnet rings so the plasma density is uniform over the grid surface, and adjusting their strength to a level where it is sufficient to prevent excessive ion losses by Bohm diffusion.

Vaughn, J. A.↗

AC transport in p-Ge/GeSi quantum well in high magnetic fields

The contactless surface acoustic wave technique is implemented to probe the high-frequency conductivity of a high-mobility p-Ge/GeSi quantum well structure in the regime of integer quantum Hall effect (IQHE) at temperatures 0.3–5.8 K and magnetic fields up to 18 T. It is shown that, in the IQHE regime at the minima of conductivity, holes are localized and ac conductivity is of hopping nature and can be described within the “two-site” model. The analysis of the temperature and magnetic-field-orientation dependence of the ac conductivity at odd filing factors enables us to determine the effective hole g-factor, |g{sub zz}|≈4.5. It is shown that the in-plane component of the magnetic field leads to a decrease in the g-factor as well as increase in the cyclotron mass, which is explained by orbital effects in the complex valence band of germanium.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Current Density and Plasma Displacement Near Perturbed Rational Surface

The current density in the vicinity of a rational surface of a force-free magnetic field subjected to an ideal perturbation is shown to be the sum of both a smooth and a delta-function distribution, which give comparable currents. The maximum perturbation to the smooth current density is comparable to a typical equilibrium current density and the width of the layer in which the current flows is shown to be proportional to the perturbation amplitude. In the standard linearized theory, the plasma displacement has an unphysical jump across the rational surface, but the full theory gives a continuous displacement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Probing intrinsic magnetization dynamics of the Y 3⁢ Fe 5 ⁢O 12 /Bi 2 ⁢Te 3 interface at low temperature

Topological insulator–magnetic insulator (TI–MI) heterostructures hold significant promise in the field of spintronics, offering the potential for manipulating magnetization through topological surface state–enabled spin-orbit torque. However, many TI–MI interfaces are plagued by issues such as contamination within the magnetic insulator layer and the presence of a low-density transitional region of the topological insulator. These interfacial challenges often obscure the intrinsic behavior of the TI–MI system. In this study, we addressed these challenges by depositing sputtered Bi 2 ⁢Te 3 on liquid phase epitaxy grown Y 3 ⁢Fe 5 ⁢O 12 /Gd 3 ⁢Ga 5 ⁢O 12 . The liquid phase epitaxy grown Y 3 ⁢Fe 5 ⁢O 12 has been previously shown to have exceptional interface quality, without an extended transient layer derived from interdiffusion processes of the substrate or impurity ions, thereby eliminating rare-earth impurity-related losses in the MI at low temperatures. At the TI–MI interface, high-resolution depth-sensitive polarized neutron reflectometry confirmed the absence of a low-density transitional growth region of the TI. By overcoming these undesirable interfacial effects, we isolate and probe the intrinsic low-temperature magnetization dynamics and transport properties of the TI–MI interface. In conclusion, our findings revealed strong spin pumping at low temperatures, accompanied by an additional in-plane anisotropy. The enhanced spin pumping at low temperatures is correlated with the observed suppression of bulk conduction and the weak antilocalization in the TI film, highlighting the interplay between the transport and spin pumping behavior in the TI–MI system.

36 MATERIALS SCIENCE↗

Optimized Electromagnetic Fields Levitate Bulk Metallic Materials

The bulk metallic electromagnetic levitation technique has a promising application prospect in condensed physics and materials science. In order to resolve the problem of weak levitation force and the small size of samples, an optimized solution based on finite element analysis (FEA) is developed to seek the best electromagnetic field distribution in the levitation zone. The influence of material properties on the distribution of magnetic flux density, surface pressure, and the Lorentz force were studied by the FEA method with various sample sizes of titanium and copper balls. The levitation capability of cylindrical coil system which consists of a single-layer coil with an inner diameter of 30 mm and the levitated object with a diameter of 20 mm was analyzed. To keep a balance between the turn number and increment efficiency of force, the best number of 7 turns is confirmed. Then, two types of optimized coils were predicted by numerical simulations, and the levitation force is improved drastically. The double-layer coil displays an outstanding levitation capability owing to the strong electromagnetic field generated by multilayer turns. In addition, 5 to 50 g aluminum, titanium, copper, and nickel are levitated by the above three kinds of coils and the levitation capacities are validated from the recorded data of the minimum operating current that can levitate the samples. The experimental results show good agreements with the simulation results, and the minimum current for optimized coils is reduced efficiently.

36 MATERIALS SCIENCE↗

Magnetic field observations of evolved stars

A search has been made for Zeeman broadening in high resolution spectra of eight G and K type, evolved stars which have active chromospheres and coronae. No Zeeman broadening was found. It is likely that the fraction of the stellar surface that contains magnetic fields is similar in active giants and dwarfs, based on their comparable chromospheric line strengths and plage surface brightnesses (deduced from Mg II/C IV ratios) and on their comparable requirements for coronal confinement. Thus, since Zeeman broadening is detectable on active dwarfs, the nondetections of Zeeman broadening on these evolved stars are probably due to systematically lower field strengths. That the lower field strengths do not result in lower chromospheric surface brightnesses on giants is consistent with the theoretial 'slow mode' MHD wave generation rates of Ulmschneider and Stein (1982). The low field strengths can be explained by requiring that the fields be in equipartition with either the thermal or turbulent energy densities, both of which are reduced in late-type evolved stars compared with the sun.

Marcy, G. W.↗

Enhanced magnetic field production during oblique hypervelocity impacts

The natural remanent magnetization of the lunar surface as displayed in returned lunar samples and the data returned by the Apollo subsatellite magnetometer has an unexpectedly high magnitude and exhibits spatial variation at all scales. The origin of the lunar remanent fields may be due to crustal remanence of a core dynamo field occurring early in lunar history prior to extensive modification by impact or remanence of transient fields, particularly associated with impacts, occurring on a local scale throughout lunar history. The presence of an early core dynamo field would have strong consequences for the formation and early evolution of the Moon, yet to deconvolve the role that an internally generated core dynamo field may have had, it is necessary to understand how the magnetic state of the lunar surface has developed through time. Impact-induced magnetism may be an important component of the present magnetic state of the lunar surface. New theoretical considerations suggest that transient magnetic fields within plasma produced by hypervelocity meteorite impacts may have greater significance at larger scales than previously thought.

Crawford, D. A.↗

A 3D High-Order Unstructured Finite-Volume Algorithm for Solving Maxwell's Equations

A three-dimensional finite-volume algorithm based on arbitrary basis functions for time-dependent problems on general unstructured grids is developed. The method is applied to the time-domain Maxwell equations. Discrete unknowns are volume integrals or cell averages of the electric and magnetic field variables. Spatial terms are converted to surface integrals using the Gauss curl theorem. Polynomial basis functions are introduced in constructing local representations of the fields and evaluating the volume and surface integrals. Electric and magnetic fields are approximated by linear combinations of these basis functions. Unlike other unstructured formulations used in Computational Fluid Dynamics, the new formulation actually does not reconstruct the field variables at each time step. Instead, the spatial terms are calculated in terms of unknowns by precomputing weights at the beginning of the computation as functions of cell geometry and basis functions to retain efficiency. Since no assumption is made for cell geometry, this new formulation is suitable for arbitrarily defined grids, either smooth or unsmooth. However, to facilitate the volume and surface integrations, arbitrary polyhedral cells with polygonal faces are used in constructing grids. Both centered and upwind schemes are formulated. It is shown that conventional schemes (second order in Cartesian grids) are equivalent to the new schemes using first degree polynomials as the basis functions and the midpoint quadrature for the integrations. In the new formulation, higher orders of accuracy are achieved by using higher degree polynomial basis functions. Furthermore, all the surface and volume integrations are carried out exactly. Several model electromagnetic scattering problems are calculated and compared with analytical solutions. Examples are given for cases based on 0th to 3rd degree polynomial basis functions. In all calculations, a centered scheme is applied in the interior, while an upwind matching scheme is employed at material interfaces and the Engquist-Majda non-reflecting boundary condition is implemented at the numerical outer boundaries. The staggered leapfrog scheme and the Runge-Kutta methods are utilized for the time integration. Excellent agreements are found between the numerical and analytical solutions.

Liu, Yen↗