Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Realization of an intrinsic ferromagnetic topological state in MnBi 8 Te 13

Novel magnetic topological materials pave the way for studying the interplay between band topology and magnetism. However, an intrinsically ferromagnetic topological material with only topological bands at the charge neutrality energy has so far remained elusive. Using rational design, we synthesized MnBi 8 Te 13 , a natural heterostructure with [MnBi 2 Te 4 ] and [Bi 2 Te 3 ] layers. Thermodynamic, transport, and neutron diffraction measurements show that despite the adjacent [MnBi 2 Te 4 ] being 44.1 Å apart, MnBi 8 Te 13 manifests long-range ferromagnetism below 10.5 K with strong coupling between magnetism and charge carriers. First-principles calculations and angle-resolved photoemission spectroscopy measurements reveal it is an axion insulator with sizable surface hybridization gaps. Our calculations further demonstrate the hybridization gap persists in the two-dimensional limit with a nontrivial Chern number. Therefore, as an intrinsic ferromagnetic axion insulator with clean low-energy band structures, MnBi 8 Te 13 serves as an ideal system to investigate rich emergent phenomena, including the quantized anomalous Hall effect and quantized magnetoelectric effect.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Revisiting Néel 60 years on: The magnetic anisotropy of L1 0 FeNi (tetrataenite)

The magnetocrystalline anisotropy energy of atomically ordered L1 0 FeNi (the meteoritic mineral tetrataenite) is studied within a first-principles electronic structure framework. Two compositions are examined: equiatomic Fe 0.5 Ni 0.5 and an Fe-rich composition, Fe 0.56 Ni 0.44 . It is confirmed that, for the single crystals modeled in this work, the leading-order anisotropy coefficient K 1 dominates the higher-order coefficients K 2 and K 3 . To enable comparison with experiment, the effects of both imperfect atomic long-range order and finite temperature are included. While our computational results initially appear to undershoot the measured experimental values for this system, careful scrutiny of the original analysis due to Néel et al. [J. Appl. Phys. 35, 873 (1964)] suggests that our computed value of K 1 is, in fact, consistent with experimental values, and that the noted discrepancy has its origins in the nanoscale polycrystalline, multivariant nature of experimental samples, that yields much larger values of K 2 and K 3 than expected a priori. These results provide fresh insight into the existing discrepancies in the literature regarding the value of tetrataenite’s uniaxial magnetocrystalline anisotropy in both natural and synthetic samples.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Vector potential and surface magnetic field in magnetoelectric antiferromagnetic materials

A general formula for the average vector potential of bulk periodic systems is proposed and shown to set the boundary conditions at magnetic interfaces. Here, for antiferromagnetic materials, the study reveals a unique relation between the macroscopic potential and the orientation-dependent magnetic quadrupole as a result of the different crystalline and magnetic symmetries. In particular, at surfaces and interfaces of a truncated bulk without inversion and time-reversal symmetries, the average vector potential exhibits a discontinuity which results in an interfacial magnetic field. In general, however, due to the surface and interface electronic and atomic relaxations, additional magnetization may result. For the experimentally observed magnetoelectric antiferromagnets, in particular, our symmetry analysis suggests that the relaxation effects could well be a system response to the presence of such a potential discontinuity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Use of magnetic carbon composites from renewable resource materials for oil spill clean up and recovery

A method of separating a liquid hydrocarbon material from a body of water, includes: (a) mixing magnetic carbon-metal nanocomposites with a liquid hydrocarbon material dispersed in a body of water to allow the magnetic carbon-metal nanocomposites each to be adhered by the liquid hydrocarbon material to form a mixture; (b) applying a magnetic force to the mixture to attract the magnetic carbon-metal nanocomposites each adhered by the liquid hydrocarbon material; and (c) removing the body of water from the magnetic carbon-metal nanocomposites each adhered by the liquid hydrocarbon material while maintaining the applied magnetic force. The magnetic carbon-metal nanocomposites is formed by subjecting one or more metal lignosulfonates or metal salts to microwave radiation, in presence of lignin/derivatives either in presence of alkali or a microwave absorbing material, for a period of time effective to allow the carbon-metal nanocomposites to be formed.

09 BIOMASS FUELS↗
DOE OSTI2018

Relationship between laser energy input, microstructures and magnetic properties of selective laser melted Fe-6.9%wt Si soft magnets

Highlights: • Effect of laser energy input on magnetic properties of SLM Fe-6.9%wt.Si is described; • Magnetic properties can be described as function of as-built microstructure after stress-relief post-treatment; • Samples with density >99% and strong crystallographic texture along BD have the best magnetic properties; • At very high laser energy, a strong cube texture forms that deteriorates the magnetic properties. - Abstract: Selective Laser Melting (SLM), a powder-bed Additive Manufacturing technology, can be used in combination with high temperature post-annealing to produce high-silicon steel parts characterised by quasi-static magnetic properties comparable to those of commercial electrical steel. However, the role of the as-built microstructure on the magnetic properties is still unexplored. Therefore, in this study the effect of the energy input of the processing laser on the magnetic properties of the material is investigated. The magnetic properties are determined for 4 mm-high rings obtained using three laser energy input values that provide a good compromise in terms of porosity and crack formation. The best magnetic properties are obtained for the rings built using a value of energy input that produces a strong fibrous crystallographic texture, in which one of the crystallographic <001> axes is preferentially aligned along the build direction. Whether the magnetic properties change with sample direction as a result of the crystallographic texture will be the subject of future research.

36 MATERIALS SCIENCE↗
NASA NTRS2013

Magnetostrictive Pressure Regulating System

A magnetostrictive pressure regulating system includes a magnetostrictive valve that incorporates a magnetostrictive actuator with at least one current-carrying coil disposed thereabout. A pressure force sensor, in fluid communication with the fluid exiting the valve, includes (i) a magnetostrictive material, (ii) a magnetic field generator in proximity to the magnetostrictive material for inducing a magnetic field in and surrounding the magnetostrictive material wherein lines of magnetic flux passing through the magnetostrictive material are defined, and (iii) a sensor positioned adjacent to the magnetostrictive material and in the magnetic field for measuring changes in at least one of flux angle and flux density when the magnetostrictive material experiences an applied force that is aligned with the lines of magnetic flux. The pressure of the fluid exiting the valve causes the applied force. A controller coupled to the sensor and to the current-carrying coil adjusts a current supplied to the current-carrying coil based on the changes so-measured.

Richard, James A.↗
DOE OSTI2021

Thermal and Magnetic Field Switching in a Two-Step Hysteretic Mn III Spin Crossover Compound Coupled to Symmetry Breakings

In this work, a Mn III spin crossover complex with atypical two-step hysteretic thermal switching at 74 K and 84 K shows rich structural–magnetic interplay and magnetic-field-induced spin state switching below 14 T with an onset below 5 T. The spin states, structures, and the nature of the phase transitions are elucidated via X-ray and magnetization measurements. An unusual intermediate phase containing four individual sites, where 1\4 are in a pure low spin state, is observed. The splitting of equivalent sites in the high temperature phase into four inequivalent sites is due to a structural reorganization involving a primary and a secondary symmetry-breaking order parameter that induces a crystal system change from orthorhombic→monoclinic and a cell doubling. Further cooling leads to a reconstructive phase transition and a monoclinic low-temperature phase with two inequivalent low-spin sites. The coupling between the order parameters is identified in the framework of Landau theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Evolution of different structural phases of TiO{sub 2} films with oxygen partial pressure and Fe doping and their electrical properties

Highlights: ► Fe doped and undoped TiO{sub 2} films are grown with varying oxygen partial pressure (OPP). ► Different structural and electrical phases of TiO{sub 2} films evolve with OPP. ► Phases obtained at different OPP are not same for films with different Fe doping. ► XPS confirms Fe is not in metal cluster form. ► Charge ordering is observed in magneli phase of Fe doped and undoped TiO{sub 2} films. -- Abstract: We have studied the influence of oxygen partial pressure (OPP; 250 mTorr–1 × 10{sup −5} Torr) and Fe doping (2 and 4 at.%) on structural and electrical properties of TiO{sub 2} thin films on LaAlO{sub 3} substrates. X-ray photoelectron spectroscopy suggests that Fe is not in metal cluster form. It is found that the evolution of the three phases; anatase, rutile and brookite of TiO{sub 2} as well as the magneli phase (Ti{sub n}O{sub 2n−1}) strongly depends on the OPP and Fe doping concentration. All the films grown at 250 mTorr show insulating behavior, whereas films grown at 1 × 10{sup −2} and 1 × 10{sup −4} Torr reveal high temperature metallic to low temperature semiconducting transition. Interestingly, films deposited at 1 × 10{sup −5} Torr reveal charge ordering, which is contributed to the magneli phase of TiO{sub 2}. The present study suggests that functionality of TiO{sub 2} thin film based devices can be tuned by properly selecting the OPP and dopant concentration.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Crystallographic and magnetic phase transitions in the layered ruthenium oxy-arsenides TbRuAsO and DyRuAsO

The crystallographic and physical properties of TbRuAsO and DyRuAsO at and below room temperature are reported, including full structure refinements from powder X-ray diffraction data and measured electrical and thermal transport properties, magnetic susceptibility, and heat capacity. Both compounds are isostructural to LaFeAsO (ZrCuSiAs-type, P4/nmm) at room temperature. However, DyRuAsO undergoes a symmetry-lowering crystallographic phase transition near 25 K, and adopts an orthorhombic structure (Pmmn) below this temperature. This structural distortion is unlike those observed in the analogous Fe compounds. Magnetic phase transitions are observed in both compounds which suggest antiferromagnetic ordering of lanthanide moments occurs near 7.0 K in TbRuAsO and 10.5 K in DyRuAsO. The nature of the structural distortion as well as thermal conductivity and heat capacity behaviors indicate strong coupling between the magnetism and the lattice. The behaviors of both materials show magnetic ordering of small moments on Ru may occur at low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Magnetic nematicity: A debated origin

Different experimental studies based on nuclear magnetic resonance and inelastic neutron scattering reach opposing conclusions in regards to the origin of magnetic nematicity in iron chalcogenides.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Unusual 5f magnetism in new kagome material UV 6 Sn 6

Materials in the family R V 6 Sn 6 (R = rare earth) provide a unique platform to investigate the interplay between local moments from R layers and nonmagnetic vanadium kagome layers. Yet, the investigation of actinide members remains scarce. Here we report the synthesis of UV 6 Sn 6 single crystals through the self-flux technique. Physical property measurements reveal two uranium-driven antiferromagnetic transitions at T N 1 = 29 K and T N 2 = 24 K, a complex field-temperature phase diagram, and unusual negative domain-wall magnetoresistance. Specific heat and angle-resolved photoemission spectroscopy measurements show a moderate f -electron enhancement to the density of states at the Fermi level (EF), whereas our band structure calculations place the vanadium flat bands 0.25 eV above E F . These findings point to a materials opportunity to expand the uranium 166 family with the goal of enhancing correlations by tuning 5 f and 3 d flat bands to E F .

36 MATERIALS SCIENCE↗
DOE OSTI2015

Enhancement of two photon absorption with Ni doping in the dilute magnetic semiconductor ZnO crystalline nanorods

In this letter, we have investigated the third-order optical nonlinearities of high-quality Ni doped ZnO nanorods crystallized in wurtzite lattice, prepared by the wet chemical method. In our experiments, we found that the two photon absorption coefficient (β) increases by as much as 14 times, i.e., 7.6 ± 0.4 to 112 ± 6 cm/GW, when the Ni doping is increased from 0% to 10%. The substantial enhancement in β is discussed in terms of the bandgap scaling and Ni doping. Furthermore, we also show that the optical bandgap measured by UV-Vis and photoluminescence spectroscopies, continuously redshift with increasing Ni doping concentration. We envision that the strong nonlinear optical properties together with their dilute magnetic effects, they form an important class of materials for potential applications in magneto-optical and integrated optical chips.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Intrinsic left-handed electromagnetic properties in anisotropic superconductors

Left-handed materials usually are realized in artificial subwavelength structures. In this, we show that some anisotropic superconductors such as Bi 2 Sr 2 CaCu 2 O 8+δ , YBa 2 Cu x O y , and La 2-x Sr x CuO 4 , are intrinsic left-handed materials. The condition is that the plasma frequency in the c axis, ω c , and in the ab plane, ω ab , and the operating angular frequency, ω , satisfy ω c < ω < ω ab . In addition, ω should be smaller than the superconducting energy gap to sustain superconductivity. We study the reflection and transmission of electromagnetic waves and reveal negative refraction and the backward wave with the phase velocity opposite to the direction of energy flux propagation. We also discuss possible approaches for improvement, making these properties feasible for experimental validation. Being intrinsic left-hand materials, the anisotropic superconductors are promising for applications in functional electromagnetic devices in the terahertz frequency band.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A combined first principles study of the structural, magnetic, and phonon properties of monolayer CrI3

The first magnetic 2D material discovered, monolayer (ML) CrI3, is particularly fascinating due to its ground state ferromagnetism. However, because ML materials are difficult to probe experimentally, much remains unresolved about ML CrI3’s structural, electronic, and magnetic properties. Here, we leverage Density Functional Theory (DFT) and high-accuracy Diffusion Monte Carlo (DMC) simulations to predict lattice parameters, magnetic moments, and spin–phonon and spin–lattice coupling of ML CrI3. We exploit a recently developed surrogate Hessian DMC line search technique to determine CrI3’s ML geometry with DMC accuracy, yielding lattice parameters in good agreement with recently published STM measurements—an accomplishment given the ~10% variability in previous DFT-derived estimates depending upon the functional. Strikingly, we find that previous DFT predictions of ML CrI3’s magnetic spin moments are correct on average across a unit cell but miss critical local spatial fluctuations in the spin density revealed by more accurate DMC. DMC predicts that magnetic moments in ML CrI3 are 3.62 μB per chromium and -0.145 μB per iodine, both larger than previous DFT predictions. The large disparate moments together with the large spin–orbit coupling of CrI3’s I-p orbital suggest a ligand superexchange-dominated magnetic anisotropy in ML CrI3, corroborating recent observations of magnons in its 2D limit. We also find that ML CrI3 exhibits a substantial spin–phonon coupling of ~3.32 cm-1. Our work, thus, establishes many of ML CrI3’s key properties, while also continuing to demonstrate the pivotal role that DMC can assume in the study of magnetic and other 2D materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗