Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Heterostructures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Photodoping of graphene with long-lived electrons by interfacing with Janus WSSe

The performance of semiconductor optoelectronic devices depends on efficient photodoping of active materials, where optical excitation generates photocarriers. Despite more than two decades of research, efficient photodoping in graphene remains elusive due to the formation of neutral excitons with ultrashort lifetimes. Here, by interfacing graphene with a Janus WSSe monolayer, we achieve unipolar photodoping of graphene with long-lived carriers. The Janus monolayer was synthesized via selenium implantation of WS 2 monolayers grown by chemical vapor deposition. We fabricated the heterostructure by transferring a mechanically exfoliated graphene monolayer onto the Se-terminated side of WSSe. Through photoluminescence and transient absorption spectroscopy, we demonstrate that photoexcited electrons in WSSe transfer efficiently to graphene, while a portion of the photoexcited holes remains confined in WSSe due to its built-in electric field. This charge separation leads to a net electron population in graphene. These electrons exhibit extended lifetimes due to spatial separation from their recombination partners, offering a promising route to enhancing the performance of graphene-based optoelectronic devices.

Zheng, Ting [Southeast Univ., Nanjing (China); Uni↗

Multiscale analysis of large twist ferroelectricity and swirling dislocations in bilayer hexagonal boron nitride

With its atomically thin structure and intrinsic ferroelectric properties, heterodeformed bilayer hexagonal boron nitride (hBN) has gained prominence in next-generation non-volatile memory applications. However, studies to date have focused almost exclusively on small-twist bilayer hBN, leaving the question of whether ferroelectricity can persist under small heterostrain and large heterodeformation entirely unexplored. In this work, we establish the crystallographic origin of ferroelectricity in bilayer hBN configurations heterodeformed relative to high-symmetry configurations such as AA-stacking and 21.786789° twisted configurations (Σ7), using Smith normal form bicrystallography. We then demonstrate out-of-plane ferroelectricity in bilayer hBN across configurations vicinal to both the AA and Σ7 stackings. Atomistic simulations reveal that AA-vicinal systems support ferroelectricity under both small twist and small strain, with polarization switching in the latter governed by the deformation of swirling dislocations rather than the straight interface dislocations seen in the former. For Σ7-vicinal systems, where existing interatomic potentials underperform particularly under extreme out-of-plane compression, we develop a density-functional-theory-informed continuum framework—the bicrystallography-informed frame-invariant multiscale (BFIM) model, which captures out-of-plane ferroelectricity in heterodeformed configurations vicinal to Σ7 stacking. Interface dislocations in these large heterodeformed bilayer configurations exhibit markedly smaller Burgers vectors compared to interface dislocations in small-twist and small-strain bilayer hBN. The BFIM model reproduces experimental results and provides a powerful, computationally efficient framework for predicting ferroelectricity in large-unit-cell heterostructures where atomistic simulations are prohibitively expensive.

Ahmed, Md Tusher [Univ. of Illinois at Urbana-Cham↗

On the redistribution of charge in La 0.7 Sr 0.3 CrO 3 /La 0.7 Sr 0.3 MnO 3 multilayer thin films

The atomic and electronic structures of La 0.7 Sr 0.3 MnO 3 (LSMO)/La 0.7 Sr 0.3 CrO 3 (LSCO) multilayer thin films are investigated using aberration corrected scanning transmission electron microscopy (STEM) imaging and spectroscopy. Atomic resolution high angle annular dark-field reveals that LSMO layers have an expanded out-of-plane lattice parameter compared to compressed LSCO layers, contrasting with x-ray diffraction measurements. The expansion is found to result from preferential oxygen vacancy formation in LSMO during STEM sample preparation as determined by electron energy-loss spectroscopy. The La/Sr atom column intensity is also found to oscillate by about 4% between the LSMO and LSCO layers, indicative of La/Sr concentration variation. Using energy-dispersive x-ray spectroscopy in combination with image simulations, we confirm the La/Sr inhomogeneity and elucidate the origin of charge redistribution within the multilayer. These results illuminate the sensitivity of the technique to subtle structural, chemical, and electronic features that can arise to compensate charge imbalances in complex oxide heterostructures.

36 MATERIALS SCIENCE↗

Accurate quantification of lattice temperature dynamics from ultrafast electron diffraction of single-crystal films using dynamical scattering simulations

In ultrafast electron diffraction (UED) experiments, accurate retrieval of time-resolved structural parameters, such as atomic coordinates and thermal displacement parameters, requires an accurate scattering model. Unfortunately, kinematical models are often inaccurate even for relativistic electron probes, especially for dense, oriented single crystals where strong channeling and multiple scattering effects are present. This article introduces and demonstrates dynamical scattering models tailored for quantitative analysis of UED experiments performed on single-crystal films. As a case study, we examine ultrafast laser heating of single-crystal gold films. Comparison of kinematical and dynamical models reveals the strong effects of dynamical scattering within nm-scale films and their dependence on sample topography and probe kinetic energy. Applying to UED experiments on an 11 nm thick film using 750 keV electron probe pulses, the dynamical models provide a tenfold improvement over a comparable kinematical model in matching the measured UED patterns. Also, the retrieved lattice temperature rise is in very good agreement with predictions based on previously measured optical constants of gold, whereas fitting the Debye–Waller factor retrieves values that are more than three times lower. Altogether, these results show the importance of a dynamical scattering theory for quantitative analysis of UED and demonstrate models that can be practically applied to single-crystal materials and heterostructures.

36 MATERIALS SCIENCE↗

Element-specific ultrafast lattice dynamics in FePt nanoparticles

Light–matter interaction at the nanoscale in magnetic alloys and heterostructures is a topic of intense research in view of potential applications in high-density magnetic recording. While the element-specific dynamics of electron spins is directly accessible to resonant x-ray pulses with femtosecond time structure, the possible element-specific atomic motion remains largely unexplored. We use ultrafast electron diffraction (UED) to probe the temporal evolution of lattice Bragg peaks of FePt nanoparticles embedded in a carbon matrix following excitation by an optical femtosecond laser pulse. The diffraction interference between Fe and Pt sublattices enables us to demonstrate that the Fe mean square vibration amplitudes are significantly larger that those of Pt as expected from their different atomic mass. Both are found to increase as energy is transferred from the laser-excited electrons to the lattice. Contrary to this intuitive behavior, we observe a laser-induced lattice expansion that is larger for Pt than for Fe atoms during the first picosecond after laser excitation. This effect points to the strain-wave driven lattice expansion with the longitudinal acoustic Pt motion dominating that of Fe.

36 MATERIALS SCIENCE↗

Controlling antiferromagnetic domains in patterned La0.7Sr0.3FeO3 thin films

Transition metal oxide thin films and heterostructures are promising platforms to achieve full control of the antiferromagnetic (AFM) domain structure in patterned features as needed for AFM spintronic devices. In this work, soft x-ray photoemission electron microscopy was utilized to image AFM domains in micromagnets patterned into La0.7Sr0.3FeO3 (LSFO) thin films and La0.7Sr0.3MnO3 (LSMO)/LSFO superlattices. A delicate balance exists between magnetocrystalline anisotropy, shape anisotropy, and exchange interactions such that the AFM domain structure can be controlled using parameters such as LSFO and LSMO layer thickness, micromagnet shape, and temperature. In LSFO thin films, shape anisotropy gains importance only in micromagnets where at least one extended edge is aligned parallel to an AFM easy axis. In contrast, in the limit of ultrathin LSFO layers in the LSMO/LSFO superlattice, shape anisotropy effects dominate such that the AFM spin axes at micromagnet edges can be aligned along any in-plane crystallographic direction.

Lee, Michael S. (ORCID:0000000177852189)↗

High-resolution optical micro-spectroscopy extending from the near-infrared to the vacuum-ultraviolet

Optical characterization of small samples over a wide spectral range with rapid data acquisition is essential for the analysis of many material systems, such as 2D van der Waals layers and their heterostructures. In this paper, we present the design and implementation of a tabletop micro-spectroscopy system covering the near-infrared to the vacuum-ultraviolet (1.2 eV–6.8 eV or ~1.0 μm to 185 nm) using mostly off-the-shelf components. It can measure highly reproducible local reflectance spectra with a total integration time of a few minutes and a full-width-half-maximum spot size of 2.7 by 5.6 μm. For precise positioning, the design also allows simultaneous monitoring of the measurement location and the wide-field image of the sample. We demonstrate ultra-broadband reflectance spectra of exfoliated thin flakes of several wide-gap 2D materials, including ZnPS 3 , hexagonal BN, and Ca(OH) 2 .

47 OTHER INSTRUMENTATION↗

Modification of terahertz emission spectrum using microfabricated spintronic emitters

Terahertz (THz) radiation with sub-millimeter wavelength falls in the gap between optical and radio frequencies. Conventional THz emitters do not intertwine with spin degrees of freedom. However, it was recently shown that broadband THz radiation can be efficiently created also by exploiting spin-based effects on ultrafast time scales. Here, we demonstrate the generation and control of THz radiation from microstructured spintronic THz emitters based on the inverse spin-Hall effect. Using time-domain THz spectroscopy, we compare the THz spectra of different stripe patterns made of Fe/Pt bilayers with a spectrum obtained from an extended Fe/Pt bilayer film. It is found that the THz spectrum can be altered by a proper choice of the microstructure dimensions. The experimentally observed spectra are interpreted in terms of a simplified multi-slit interference model, which captures the main experimental features. Our results pave the way for an efficient control of THz light emitted from magnetic heterostructures. This is a crucial step forward for the design and realization of directional THz sources.

Wu, Weipeng↗

Empowering 2D nanoelectronics via ferroelectricity

Introducing ferroelectricity to two-dimensional (2D) van der Waals (vdW) materials such as graphene, transition metal dichalcogenides, and black phosphorous presents a promising route for developing high-speed and low-power nanoelectronics. This Perspective reviews two actively pursued materials strategies, ferroelectric/vdW heterostructures and vdW ferroelectric materials. Finally, the topics discussed include their application potential and performance limitations as memory, logic, sensing, and optical devices, as well as the challenges and outlook of the field.

2D materials↗

Nanoscale control of LaAlO 3 /SrTiO 3 metal–insulator transition using ultra-low-voltage electron-beam lithography

In this work, we describe a method to control the insulator–metal transition at the LaAlO 3 /SrTiO 3 interface using ultra-low-voltage electron beam lithography. Compared to previous reports that utilize conductive atomic force microscope (c-AFM) lithography, this approach can provide comparable resolution (~10 nm) at write speeds (10 mm/s) that are up to 10 000× faster than c-AFM. The writing technique is nondestructive, and the conductive state is reversible via prolonged exposure to air. Transport properties of representative devices are measured at milli-Kelvin temperatures, where superconducting behavior is observed. We also demonstrate the ability to create conducting devices on graphene/LaAlO 3 /SrTiO 3 heterostructures. The underlying mechanism is believed to be closely related to the same mechanism regulating c-AFM-based methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Collective spin dynamics under dissipative spin Hall torque

Current-induced spin torques in layered magnetic heterostructures have many commonalities across broad classes of magnetic materials. These include not only collinear ferromagnets, ferrimagnets, and antiferromagnets but also more complex noncollinear spin systems. We develop a general Lagrangian–Rayleigh approach for studying the role of dissipative torques, which can pump energy into long-wavelength magnetic dynamics, causing dynamic instabilities. While the Rayleigh structure of such torques is similar for different magnetic materials, their consequences depend sensitively on the nature of the order and, in particular, on whether there is a net magnetic moment. The latter endows the system with a unipolar switching capability, while magnetically compensated materials tend to evolve toward limit cycles, at large torques, with chirality dependent on the torque sign. Apart from the ferromagnetic and antiferromagnetic cases, we discuss ferrimagnets, which display an intricate competition between switching and limit cycles. As a simple case for compensated noncollinear order, we consider isotropic spin glasses and a scenario of their coexistence with a collinear magnetic order.

Tserkovnyak, Yaroslav (ORCID:0000000232773695)↗

Electrical and optical characterizations of spin-orbit torque

To further reduce the energy consumption in spin–orbit torque devices, it is crucial to precisely quantify the spin–orbit torque (SOT) in different materials and structures. In this work, heavy metal/ferromagnet and heavy metal/ferrimagnet heterostructures are employed as the model systems to compare the electrical and optical methods for the SOT characterization, which are based on the anomalous Hall effect and the magneto-optical Kerr effect, respectively. It is found that both methods yield the consistent SOT strength for the current-driven magnetization switching measurements and the harmonic measurements. Our results suggest that the optical method is a feasible and reliable tool to investigate SOT, which is a powerful way to develop insulator-based magnetic systems in the future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlling the symmetry of cadmium arsenide films by epitaxial strain

Epitaxial strains offer unique opportunities to obtain topological states in thin films and heterostructures that do not exist in their bulk counterparts. Here, we investigate the point group symmetries of coherently strained films of cadmium arsenide (Cd 3 As 2 ), a prototype three-dimensional Dirac semimetal, by convergent beam electron diffraction. We report a loss of the fourfold rotational axis and adoption of the orthorhombic mmm point group in (112)-oriented films under biaxial compressive stress. (001)-oriented Cd 3 As 2 films that are under a small biaxial tensile stress retain the fourfold rotational symmetry that protects the bulk nodes but adopt the non-centrosymmetric 4mm point group symmetry. This, in turn, suggests that (001) films adopt a different crystal structure in biaxial tension, one that differs in the arrangement of the ordered Cd vacancies that are an inherent feature of the crystal structure of Cd 3 As 2 and that are key to its nodal electronic structure. Density functional theory calculations confirm the experimental findings of the stability of the non-centrosymmetric structure under biaxial tension, whereas the centrosymmetric structure is stable under biaxial compression. The results show that bulk Cd 3 As 2 is already close to structural instability and showcase the extraordinary tunability of the topological states of Cd 3 As 2 .

36 MATERIALS SCIENCE↗

Strongly heat-assisted spin–orbit torque switching of a ferrimagnetic insulator

Ferrimagnetic insulators promise low-power and high-speed spintronic applications, thanks to their insulating nature and fast dynamics near compensation points. In a ferrimagnetic insulator/heavy metal heterostructure, we investigate field- and current-induced magnetization switching at various temperatures and observe distinct magnetization switching behaviors owing to spin-orbit torque (SOT) and heating effect. We have realized SOT switching across the magnetization compensation temperature and discovered that the SOT switching is strongly heat-assisted: the temperature is always above the compensation temperature while the SOT switching happens in our case. Moreover, we show that the SOT efficiency is strongly magnetization-dependent by characterizing the current dependence of SOT efficiency and explaining the anomalous SOT switching back phenomena in the presence of a titled external field. Our results reveal the critical role of Joule heating on the dynamics of magnetic insulators and pave the way for the application of spintronic devices based on magnetic insulators.

36 MATERIALS SCIENCE↗

Diverse simulations of time-resolved photoluminescence in thin-film solar cells: A SnO 2 /CdSe y Te 1-y case study

Time-resolved photoluminescence (TRPL) is widely used to measure carrier lifetime in thin-film solar cell absorbers. However, the injection dependence of data and frequent non-exponential decay shapes complicate the interpretation. Here, we develop a numerical model to simulate injection-dependent TRPL measurements in a SnO 2 /CdSe y Te 1-y case study solar cell structure, considering parameters of interest to researchers in industry and academia. Previous simulations have shown that, in low injection, excess electrons and holes injected by the laser pulse are rapidly separated in the electric field formed by the pn junction. As a result, at early times, the PL signal can decay faster than the Shockley-Read-Hall lifetime in the absorber bulk (t_bulk). Prior simulations have shown that the charge stored in the junction can slowly leak out to affect decays at late times. However, it has not been clear if and to what degree charge storage can affect the slopes extracted from TRPL decays - t_2 - commonly cited as the TRPL-measured lifetime. Here, we show that charge storage can, in some cases, result in t_2 values that substantially overestimate t_bulk. Previous simulations indicate that high injection conditions can screen the junction field and minimize charge separation. Here, we show that continued injection increases can drive down t_2 below t_bulk as radiative recombination becomes dominant. We catalog charge storage and radiative recombination impacts for a diverse set of material parameters and compare results to double-heterostructure models.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,S↗

Near-field imaging of plasmonic nanopatch antennas with integrated semiconductor quantum dots

Plasmonic nanopatch antennas that incorporate dielectric gaps hundreds of picometers to several nanometers thick have drawn increasing attention over the past decade because they confine electromagnetic fields to grossly sub-diffraction-limited volumes. Substantial control over the optical properties of excitons and color centers confined within these plasmonic cavities has already been demonstrated with far-field optical spectroscopies, but near-field optical spectroscopies are essential for an improved understanding of the plasmon–emitter interaction at the nanoscale. Here, we characterize the intensity and phase-resolved plasmonic response of isolated nanopatch antennas by cathodoluminescence microscopy. Furthermore, we explore the distinction between optical and electron beam spectroscopies of coupled plasmon–exciton heterostructures to identify constraints and opportunities for future nanoscale characterization and control of hybrid nanophotonic structures. While we observe substantial Purcell enhancement in time-resolved photoluminescence spectroscopies, negligible Purcell enhancement is observed in cathodoluminescence spectroscopies of hybrid nanophotonic structures. The substantial differences in measured Purcell enhancement for electron beam and laser excitation can be understood as a result of the different selection rules for these complementary experiments. Overall, these results provide a fundamentally new understanding of near-field plasmon–exciton interactions in nanopatch antennas, which is essential for myriad emerging quantum photonic devices.

36 MATERIALS SCIENCE↗

Monocrystalline 1.7-eV MgCdTe solar cells

Monocrystalline 1.7-eV Mg 0.13 Cd 0.87 Te/Mg x Cd 1-x Te (x > 0.13) double-heterostructure (DH) solar cells with varying Mg composition in the barrier layers are grown by molecular beam epitaxy. Furthermore, a Mg 0.13 Cd 0.87 Te/Mg 0.37 Cd 0.63 Te DH solar cell featuring abrupt interfaces between barriers and absorber and the addition of a SiO 2 anti-reflective coating demonstrates open-circuit voltage (V OC ), short-circuit current density (J SC ), fill factor (FF), and device active-area efficiencies up to 1.129 V, 17.3 mA/cm 2 , 77.7% and 15.2%, respectively. The V OC and FF vary oppositely with the Mg x Cd 1-x Te barrier height indicating an optimal design of the MgCdTe DHs as a tradeoff between carrier confinement and carrier transport. Temperature-dependent V OC measurements reveal the majority of carrier recombination in the devices occurs outside the DHs, in the a-Si:H hole-contact layer and at the interface between the a-Si:H layer and the Mg x Cd 1-x Te top barrier at room temperature. Simulation results for the device with the highest efficiency show that the p-type a-Si:H layer and Mg 0.37 Cd 0.63 Te top barrier contribute 1.3 mA/cm 2 and 2.4 mA/cm 2 J SC loss, respectively.

14 SOLAR ENERGY↗

Quasiparticle electronic structure of phthalocyanine:TMD interfaces from first-principles GW

Interfaces formed between monolayer transition metal dichalcogenides and (metallo)phthalocyanine molecules are promising in energy applications and provide a platform for studying mixed-dimensional molecule-semiconductor heterostructures in general. An accurate characterization of the frontier energy level alignment at these interfaces is key in the fundamental understanding of the charge transfer dynamics between the two photon absorbers. Here, we employ the first-principles substrate screening GW approach to quantitatively characterize the quasiparticle electronic structure of a series of interfaces: metal-free phthalocyanine (H 2 Pc) adsorbed on monolayer MX 2 (M = Mo, W; X = S, Se) and zinc phthalocyanine (ZnPc) adsorbed on MoX 2 (X = S, Se). Furthermore, we reveal the dielectric screening effect of the commonly used α-quartz (SiO 2 ) substrate on the H 2 Pc:MoS 2 interface using the dielectric embedding GW approach. Our calculations furnish a systematic set of GW results for these interfaces, providing the structure–property relationship across a series of similar systems and benchmarks for future experimental and theoretical studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗