Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Generic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Finite-rate entrainment effects on nitrogen oxide (NO x ) emissions in staged combustors

Axially staged combustors offer the potential for achieving low NO x emissions from gas turbines at the elevated temperatures required to achieve at least 65% combined cycle efficiencies. While there is evidence that premixing between the main burner products and secondary stream reduces NO x , it is important to characterize the specific requirements needed to achieve low emissions at gas turbine conditions. This study examines the sensitivity of NO x to finite-rate, large-scale entrainment of the main and secondary streams under the simplifying assumption of infinitely-fast small-scale mixing. Essentially, this allows us to isolate the effects of limited large-scale entrainment rates by using a homogeneous/uniform condition for the entrained and reacting gases. We use a reduced-order reactor network model to examine a generic staged-combustor whose inputs are physical time scales that embody the finite-rate entrainment characteristics. With simulations conducted over a large parameter space at typical operating conditions (25 atm, 650 K air), the results show that, even when small-scale mixing is infinitely fast and the reaction zone is uniform, entrainment significantly affects NO x emissions due to its influence on the equivalence ratio — and thus the temperature and time — at which the entrained mixture ignites. Fuel-air staging is shown to be vital to NO x reduction in most practical cases where entrainment times exceed roughly 1 ms and the secondary stream finishes entraining before the main burner products. A constrained NO x minimization indicates that using the leanest possible main burner and re-routing as much air as possible to the secondary stage is key to low NO x with finite-rate entrainment; for example, less than 10 ppm NO x can be achieved if the secondary stage contains 20% of the total mass flow.

03 NATURAL GAS↗

Effect of atomic order/disorder on vacancy clustering in concentrated NiFe alloys

Using molecular dynamics simulations, we elucidate in this paper the effect of atomic structure on vacancy clustering in ordered (L1 0 ) and random NiFe. Based on our simulations, we predict the vacancy evolution to be in complete contrast between the two systems. While large vacancy clusters, i.e., stacking fault tetrahedra (SFT) are formed in the random structure, no clustering is observed in the ordered-L1 0 structure. Similar simulations are performed on L1 0 -CuAu and L1 0 -TiAl to understand whether SFT formation is generic in L1 0 structures, or is specific to NiFe. Both materials show SFT formation, thereby highlighting specific defect energetics in L1 0 NiFe that lead to the lack of vacancy clustering. We elucidate that L1 0 -NiFe has unique thermodynamic and kinetic defect energetics, i.e., antisite energies, vacancy sublattice preference, and directional migration energy barriers that collectively lead to the lack of vacancy clustering. Finally, understanding such defect energetics could open avenues to prevent defect clustering in the vision towards development of radiation-tolerant concentrated alloys for nuclear reactor applications.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Kinetic Monte Carlo simulations of structural evolution during anneal of additively manufactured materials

Our experiments indicated that upon a post-processing anneal, an additively manufactured 316L stainless steel exhibits cubic grains rather than the conventional equiaxed grains. In this work, we have used kinetic Monte Carlo simulations to explore the origin of these cubic grains. First, we implemented a new kinetic Monte Carlo model in parallel code SPPARKS to simulate grain growth and recrystallization under a residual energy distribution. Our model incorporates physical properties and real-time, as opposed to generic properties and relative time. We further validated that our SPPARKS simulations reproduced the expected kinetic behavior of single-grain evolution. We then used the validated approach to simulate the anneal of an additively manufactured material under the same conditions used in our experiments. We found that the cubic grains can origin from a periodically varying residual energy that may be present in additively manufactured materials.

36 MATERIALS SCIENCE↗

Fault-tolerant bandwidth reservation strategies for data transfers in high-performance networks

Many next-generation e-science applications need fast and reliable transfer of large volumes of data with guaranteed performance, which is typically enabled by the bandwidth reservation service in high-performance networks. One prominent issue in such network environments with large footprints is that node and link failures are inevitable, hence potentially degrading the quality of data transfer. We consider two generic types of bandwidth reservation requests (BRRs) concerning data transfer reliability: (i) to achieve the highest data transfer reliability under a given data transfer deadline, and (ii) to achieve the earliest data transfer completion time while satisfying a given data transfer reliability requirement. We propose two periodic bandwidth reservation algorithms with rigorous optimality proofs to optimize the scheduling of individual BRRs within BRR batches. The efficacy of the proposed algorithms is illustrated through extensive simulations in comparison with scheduling algorithms widely adopted in production networks in terms of various performance metrics.

97 MATHEMATICS AND COMPUTING↗

A framework and tool for designing cost-effective, resilient, and circular net-zero supply chains under uncertainty with an application to multilayer plastic films

While 55% of Fortune 500 companies have committed to achieving net-zero emissions and/or zero-waste operations by 2035, only 2% are currently on track, revealing a critical gap between ambition and action. Designing supply chains that reduce both emissions and waste is a complex non-intuitive, multi-objective challenge, compounded by the high costs of new technologies and the need for resilient, profitable solutions. This paper aims to address this challenge by presenting a generic framework and multi-objective optimization formulation for designing cost-effective, circular, and resilient supply chains under uncertainty, implemented through a user-friendly decision-support tool with intuitive data visualization capabilities, enabling communication of results to both technical and non-technical stakeholders. We demonstrate the application of this framework in the context of multilayer plastic films (barrier films), which are widely used in food packaging and composite materials. The model quantifies trade-offs across three objectives: minimizing global warming potential, maximizing circularity, and minimizing cost. A key contribution of this work is the explicit modeling of technological resilience, the ability of supply chains to maintain function under disruption. In the cost-minimization case, the resilience constraint makes the design approximately three times more expensive in the short-term metric, but shifts the system from relying on a single recovery pathway to a portfolio of four recovery pathways, improving the robustness of the optimization solution under uncertainty. Lastly, we introduce TranZero, a decision-support tool that integrates material flow analysis, hotspot identification, and optimization-based scenario planning to support net-zero and circularity decisions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Evaluation of a nonlinear variational multiscale method for fluid transport problems

Diverse transport problems, especially those based on fluid flow models, are intrinsically multiscale and nonlinear, characteristics that often lead to intricate dynamics such as the development of instabilities and turbulence. Computational simulations that resolve all scales in these problems are often unfeasible, prompting to coarse-grained simulation strategies in which small-scale features are modeled instead of resolved. Variational Multiscale (VMS) methods, and particularly residual-based Large-Eddy Simulation (LES) approaches, have proven effective and robust for the coarse-grained simulation of complex transport problems. VMS methods avoid the assumption of separable nonlinearity and the reliance on empirical small-scale models by using a variational decomposition of scales together with a residual-based approximation of the small-scales. Evaluation of a nonlinear VMS approach, denoted as VMS n , is presented for the coarse-grained simulation of transient-advective-diffusive-reactive (TADR) transport problems arising from fluid flow models. In contrast to classical VMS approaches that neglect the effect of the small scales on the transport operator, VMS n treats the inter-dependence between large- and small-scales upfront. The treatment of inter-scale coupling involves the solution of a local algebraic nonlinear system describing the evolution of the small-scales. The VMS n approach is complemented with two algebraic approximations of the small-scales: one based on the main diagonal of the transport matrices and another that preserves transport fluxes and is suitable for generic TADR systems. The suitability of the VMS n approach for handling general TADR problems and regimes is evaluated with benchmark incompressible, compressible, and magnetohydrodynamic laminar flow problems, the incompressible Taylor-Green vortex flow, the turbulent free jet, and the two-temperature arc in crossflow. Furthermore, simulation results show that VMS n leads to minor improvements in accuracy with respect to the classical VMS for the laminar flow problems, but to significantly greater accuracy for the turbulent flows and the unsteady plasma flow problems, while using the same cohesive numerical formulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Estimation of stress and stress-induced permeability change in a geological nuclear waste repository in a thermo-hydrologically coupled simulation

Geologic disposal is a promising solution for a safe permanent isolation of accumulated high-level nuclear waste from nuclear powerplants. The behavior of host rock is highly coupled thermally, hydromechanically, and chemically. Numerical simulations of such coupled phenomena for the extremely long term (>100,000 years) and large length scale (>1 km) of geologic disposal remain to be computationally challenging. In this study, a methodology has been developed to approximate stress and stress-induced permeability change in host rock using only thermo-hydrological (TH) variables. A coupled thermo-hydromechanical (THM) simulation is carried out using TOUGH-FLAC simulator to model THM behaviors of a generic nuclear waste repository, in order to evaluate the performance of the developed methodology, which is implemented in a coupled TH simulation. Results show that stress and permeability change estimated by the developed methodology in the TH-coupled simulation match those calculated in the THM-coupled simulation over the simulated timeframe of over 10,000 years. Details about errors in stress and permeability estimates accrued by the developed methodology are discussed here. The developed methodology will help incorporate stress-induced permeability change into existing TH simulators for the long-term radionuclide transport in geologic disposal.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Numerical study of the chemo-mechanical behavior of FEBEX bentonite in nuclear waste disposal based on the Barcelona expansive model

Experimental studies show that compacted bentonite used as a backfill material for nuclear waste repository experiences strong coupling between chemical and mechanical processes. Here, we use a dual-structure expansive soil model, referred to as the Barcelona Expansive Model (BExM), to predict the behavior of bentonite buffer in subsurface emplacement tunnels for high-level radioactive waste. After emplacement, the bentonite is subjected to complex and coupled Thermal-Hydraulic-Mechanical-Chemical (THMC) processes. The BExM constitutive model is implemented in a multi-phase reactive transport and geomechanics simulator, TOUGHREACT-FLAC3D, and the model is verified with one benchmark test on FEBEX bentonite. We utilize a one-way Chemo-Mechanical (C-M) coupling approach, in which chemical changes affect the mechanical behavior of bentonite through the BExM linked with the evolution of mass fraction of smectite, exchangeable cation concentration, and ionic strength via osmotic suction. The parameters of the new coupled model for FEBEX bentonite are calibrated against a series of laboratory experiments with various salinity solutions. Finally, coupled THMC modeling is conducted for a generic argillite repository with bentonite buffer under high temperature, focusing on the long-term chemical change and its effect on the mechanical process.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Boundary-element parallel-computing algorithm for the microstructural analysis of general composites

A standard continuum-mechanics-based 3D boundary-element (BE) algorithm has been devised to the microstructural modeling of complex heterogeneous solids such as general composites. In the particular applications of this paper, the mechanical properties of carbon-nanotube reinforced composites are estimated from three-dimensional representative volume elements (RVEs). The shell-like thin-walled carbon nanotubes (CNTs) are also simulated with 3D BE models, and a generic subregion-by-subregion (SBS) algorithm makes the microstructural description of the CNT polymer systems possible. In fact, based on this algorithm, a general scalable BE parallel code is proposed. Square and hexagonal fiber-packing patterns are considered to simulate the 3D composite microstructures.

36 MATERIALS SCIENCE↗

GenASiS Mathematics: Object-oriented manifolds, operations, and solvers for large-scale physics simulations (version 2)

We report GenASiS Mathematics provides modern Fortran classes furnishing extensible object-oriented functionality for the solution of fields governed by selected partial differential equations. The initial release included extensible object-oriented implementations of simple meshes and the evolution of generic conserved currents thereon. This revision - Version 2 of Mathematics - includes significant reorganization and streamlining of these classes, higher-order reconstruction by a different method, a Poisson solver, coarsening to avoid Courant time step limitations near coordinate singularities, and the offloading of computational kernels to GPUs.

97 MATHEMATICS AND COMPUTING↗

Motif-centric phosphoproteomics to target kinase-mediated signaling pathways

Identifying cellular phosphorylation pathways based on kinase-substrate relationships is a critical step to understanding the regulation of physiological functions in cells. Mass spectrometry-based phosphoproteomics workflows have made it possible to comprehensively collect information on individual phosphorylation sites in a variety of samples. However, there is still no generic approach to uncover phosphorylation networks based on kinase-substrate relationships in rare cell populations. Here, we describe a motif-centric phosphoproteomics approach combined with multiplexed isobaric labeling, in which in vitro kinase reactions are used to generate targeted phosphopeptides, which are spiked into one of the isobaric channels to increase detectability. Proof-of-concept experiments demonstrate selective and comprehensive quantification of targeted phosphopeptides by using multiple kinases for motif-centric channels. More than 7,000 tyrosine phosphorylation sites were quantified from several tens of micrograms of starting materials. This approach enables the quantification of multiple phosphorylation pathways under physiological or pathological regulation in a motif-centric manner.

59 BASIC BIOLOGICAL SCIENCES↗

Protein conformational switch discerned via network centrality properties

Network analysis has emerged as a powerful tool for examining structural biology systems. The spatial organization of the components of a biomolecular structure has been rendered as a graph representation and analyses have been performed to deduce the biophysical and mechanistic properties of these components. For proteins, the analysis of protein structure networks (PSNs), especially via network centrality measurements and cluster coefficients, has led to identifying amino acid residues that play key functional roles and classifying amino acid residues in general. Whether these network properties examined in various studies are sensitive to subtle (yet biologically significant) conformational changes remained to be addressed. Here, we focused on four types of network centrality properties (betweenness, closeness, degree, and eigenvector centralities) for conformational changes upon ligand binding of a sensor protein (constitutive androstane receptor) and an allosteric enzyme (ribonucleotide reductase). We found that eigenvector centrality is sensitive and can distinguish salient structural features between protein conformational states while other centrality measures, especially closeness centrality, are less sensitive and rather generic with respect to the structural specificity. We also demonstrated that an ensembleinformed, modified PSN with static edges removed (which we term PSN*) has enhanced sensitivity at discerning structural changes.

59 BASIC BIOLOGICAL SCIENCES↗

Perturbative unitarity constraints on gauge portals

Dark matter that was once in thermal equilibrium with the Standard Model is generally prohibited from obtaining all of its mass from the electroweak phase transition. This implies a new scale of physics and mediator particles to facilitate dark matter annihilation. In this work, we focus on dark matter that annihilates through a generic gauge boson portal. We show how partial wave unitarity places upper bounds on the dark gauge boson, dark Higgs and dark matter masses. Outside of well-defined fine-tuned regions, we find an upper bound of 9 TeV for the dark matter mass when the dark Higgs and dark gauge bosons both facilitate the dark matter annihilations. In this scenario, the upper bound on the dark Higgs and dark gauge boson masses are 10 TeV and 16 TeV, respectively. When only the dark gauge boson facilitates dark matter annihilations, we find an upper bound of 3 TeV and 6 TeV for the dark matter and dark gauge boson, respectively. Overall, using the gauge portal as a template, we describe a method to not only place upper bounds on the dark matter mass but also on the new particles with Standard Model quantum numbers. Here, we briefly discuss the reach of future accelerator, direct and indirect detection experiments for this class of models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

MadDM v.3.0: a Comprehensive Tool for Dark Matter Studies

We present MadDM v.3.0, a numerical tool to compute particle dark matter observables in generic new physics models. The new version features a comprehensive and automated framework for dark matter searches at the interface of collider physics, astrophysics and cosmology and is deployed as a plugin of the MadGraph5 aMC@NLO platform, inheriting most of its features. With respect to the previous version, MadDM v.3.0 can now provide predictions for indirect dark matter signatures in astrophysical environments, such as the annihilation cross section at present time and the energy spectra of prompt photons, cosmic rays and neutrinos resulting from dark matter annihilation. MadDM indirect detection features support both 2 → 2 and 2 → n dark matter annihilation processes. In addition, the ability to compare theoretical predictions with experimental constraints is extended by including the Fermi-LAT likelihood for gamma-ray constraints from dwarf spheroidal galaxies and by providing an interface with the nested sampling algorithm PyMultiNest to perform high dimensional parameter scans efficiently. We validate the code for a wide set of dark matter models by comparing the results from MadDM v.3.0 to existing tools and results in the literature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Stochastic gravitational wave background from global cosmic strings

Global cosmic strings are generically predicted in particle physics beyond the Standard Model, e.g., a post-inflationary global U(1) symmetry breaking which may associate with axion-like dark matter. Here, we demonstrate that although subdominant to Goldstone emission, gravitational waves (GWs) radiated from global strings can be observable with current/future GW detectors. The frequency spectrum of such GWs is also shown to be a powerful tool to probe the Hubble expansion rate of the Universe at times prior to the Big Bang nucleosynthesis where the standard cosmology has yet to be tested.

97 MATHEMATICS AND COMPUTING↗

Leveraging large language models to address data scarcity in machine learning for graphene synthesis

Machine learning in experimental materials science faces significant challenges due to the scarcity of data, which are costly and time-consuming to generate, particularly when relying on in-house experiments. Literature data mining offers a potential solution but introduces issues like mixed data quality, inconsistent formats, and non-uniform reporting of synthesis parameters, resulting in partially missing and heterogeneous features across the dataset. Here, we propose data imputation and feature engineering methods that employ pre-trained large language models (LLMs) to enhance machine learning performance on scarce, heterogeneous datasets, demonstrated on graphene CVD synthesis data and the ML-HydPARK hydrogen storage dataset. GPT models perform data imputation via tailored prompting and semantic normalization of inconsistently reported features through embeddings, for example, to harmonize the complex nomenclature of CVD substrates. Beyond yielding more diverse and richer feature representations than traditional methods such as K-nearest neighbors (KNN) and Multivariate Imputation by Chained Equations (MICE), LLM-based data imputation is evaluated against dataset characteristics and prompting strategies. We vary the level of autonomy granted to the LLM, from generic prompting that leverages pre-trained knowledge for autonomous data generation to data-informed prompting that constrains outputs using target-specific information, and demonstrate which level of autonomy yields superior imputation performance across datasets and feature types. The proposed data engineering methods markedly improve downstream performance; for example, in graphene layer number classification using a support vector machine (SVM), binary accuracy increases from 39% to 65% and ternary accuracy from 52% to 72%. Fine-tuning experiments on both datasets show that combining our proposed LLM-based data imputation and feature encoding methods with numerical machine learning predictors outperforms standalone fine-tuned LLM predictors in data-scarce settings. The proposed strategies emphasize data enhancement techniques rather than refining learning architectures or regularizing loss functions, offering a broadly applicable framework for improving machine learning performance on scarce, inhomogeneous datasets.

Chemical vapor deposition↗

Ensuring electromagnetic compatibility in grid-connected power converters: Challenges, standards, and compliance strategies

In today's rapidly advancing world, electronic devices and systems are fundamental to a wide range of industries, including renewable energy and global telecommunications infrastructure. However, as these devices become more complex and widespread, the risk of electromagnetic interference (EMI) also increases, underscoring the importance of stringent Electromagnetic Compatibility (EMC) requirements for maintaining system integrity. This paper addresses the specific challenges associated with grid-connected power converters (GCPCs), which are critical in integrating renewable energy into existing power grids. It explores the complexities of EMI in the context of GCPCs, particularly given the recent emergence of tailored EMC standards for these systems. The paper also highlights the shortcomings of applying generic or unrelated standards to GCPCs, often leading to inadequate compliance and testing protocols. Through a detailed analysis of existing standards and recent advancements in product-specific EMC requirements, this paper provides a comprehensive overview of the current landscape, offering guidance to stakeholders on navigating the intricate EMC compliance landscape, with a focus on methodologies, testing procedures, and the evolving regulatory environment for GCPCs.

24 POWER TRANSMISSION AND DISTRIBUTION↗