Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flow instabilities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

The evolution equations for Taylor vortices in the small gap limit

The centrifugal instability of the viscous fluid flow between concentric circular cylinders in the small gap limit is considered. The amplitude of the Taylor vortex is allowed to depend on a slow time variable, a slow axial variable, and the polar angle. It is shown that the amplitude of the vortex cannot in general be described by a single amplitude equation. However, if the axial variations are periodic a single amplitude equation can be derived. In the absence of any slow axial variations it is shown that a Taylor vortex remains stable to wavy vortex perturbations. Furthermore, in this situation, stable nonaxisymmetric modes can occur but do not bifurcate from the Taylor vortex state. The stability of these modes is shown to be governed by a modified form of the Eckhaus criterion.

Hall, P.↗

On the dynamics of equatorial forcing of climate teleconnections

A number of observational, theoretical, and modeling studies have been conducted on the remote influence of the tropics on the midlatitudes. Teleconnection in the geopotential height field between the tropics and the extratropics associated with the Southern Oscillation in the so-called Pacific-North America (PNA) pattern, has often been cited as an example of such remote influence. Simmons et al. (1983) have shown that teleconnections such as PNA may arise both from barotropic instability of the extratropical zonal flow and from tropical forcing. The present investigation is only concerned with the dynamics of the part of the atmospheric teleconnection which arises from tropical forcing. Some fundamentals of Rossby wave theory in unsheared flow are discussed along with the linear response to equatorial forcing for horizontally, sheared zonal mean flow. A global shallow-water spectral model is employed in conjunction with a theoretical analysis to show the teleconnection patterns which develop under different large-scale mean circulation conditions.

Lau, K.-M.↗

Evolution equations for Taylor vortices in the small-gap limit

The centrifugal instability of the viscous fluid flow between concentric circular cylinders in the small gap limit is considered. The amplitude of the Taylor vortex is allowed to depend on a slow time variable, a slow axial variable, and the polar angle. It is shown that the amplitude of the vortex cannot in general be described by a single amplitude equation. However, if the axial variations are periodic a single amplitude equation can be derived. In the absence of any slow axial variations it is shown that a Taylor vortex remains stable to wavy vortex perturbations. Furthermore, in this situation, stable nonaxisymmeric modes can occur but do not bifurcate from the Taylor vortex state. The stability of these modes is shown to be governed by a modified form of the Eckhaus criterion. Previously announced in STAR as N84-10501

Hall, P.↗

Flame flashback in a premixed dump combustor

A stainless steel, rectangular center-dump, premixed-prevaporized combustor was used at the NASA Lewis Research Center to study flashback in controlled conditions simulating gas turbine combustor operations under steady-state and transient conditions. The combustor allowed visual access to the combustion area, and was operated at inlet air temperatures from 600 to 850 K, premixer wall temperatures from 450 to 900 K, and average premixer velocity from 40 to 80 ft/s. A parametric study revealed a slight decrease in the flashback equivalence ratio as the inlet air temperatures increased. It also indicated that the premixer wall temperature and premixer velocity are not governing parameters of flashback. It is suggested that flashback occurs through the premixer wall boundary layer flow reversal caused by combustion instability.

Proctor, M. P.↗

The near and far acoustic fields of broadband shock associated noise

A stochastic model theory is presented which suggests that the broadband shock associated noise of supersonic jets is generated by the weak interaction between downstream propagating large turbulence structures and the quasiperiodic shock cells in the jet plume. The large turbulence structures are modelled by a superposition of the intrinsic instability waves of the mean flow of the jet, and the quasiperiodic shock cells are broken down into time-independent waveguide modes of the jet flow using multiple scales expansion. The observed broadband shock associated noise consists of a superposition of the spectra generated by the different waveguide modes. Starting from the equations of motion of a compressible fluid, formulas for calculating the far field and near field noise are developed. Good general agreement is found with previous results.

Tam, C. K. W.↗

Transition at hypersonic speeds

Certain conjectures on the physics of instabilities in high-speed flows are discussed and the state of knowledge of hypersonic transition summarized. The case is made for an unpressured systematic research program in this area consisting of controlled microscopic experiments, theory, and numerical simulations.

Morkovin, Mark V.↗

The existence and stability of steady circulations in a conditionally symmetrically unstable basic flow

The existence of steady, nonlinear circulations in a flow susceptible to conditionally symmetric instability is studied, treating the latent heating as an energy source which is implicitly related to the motion field. The viscous nonlinear circulations of symmetrical instability are briefly discussed, and an existence theorem for steady, nonlinear symmetric circulations with bounded rates of latent heat release is given. The uniqueness and stability of these circulations are discussed, and some physical interpretations are given.

Xu, Qin↗

Response of multi-panel assembly to noise from a jet in forward motion

A model of the interaction of the noise from a spreading subsonic jet with a 4 panel assembly is studied numerically in two dimensions. The effect of forward motion of the jet is accounted for by considering a uniform flow field superimposed on a mean jet exit profile. The jet is initially excited by a pulse-like source inserted into the flow field. The pulse triggers instabilities associated with the inviscid instability of the jet shear layer. These instabilities generate sound which in turn serves to excite the panels. We compare the sound from the jet, the responses of the panels and the resulting acoustic radiation for the static jet and the jet in forward motion. The far field acoustic radiation, the panel response and sound radiated from the panels are all computed and compared to computations of a static jet. The results demonstrate that for a jet in forward motion there is a reduction in sound in downstream directions and an increase in sound in upstream directions in agreement with experiments. Furthermore, the panel response and radiation for a jet in forward motion exhibits a downstream attenuation as compared with the static case.

Bayliss, A.↗

Models of Plumes: Their Flow, Their Geometric Spreading, and Their Mixing with Interplume Flow

There are two types of plume flow models: (1) 1D models using ad hoc spreading functions, f(r); (2) MagnetoHydroDynamics (MHD) models. 1D models can be multifluid, time dependent, and incorporate very general descriptions of the energetics. They confirm empirical results that plume flow is slow relative to requirements for high speed wind. But, no published 1 D model incorporates the rapid local spreading at the base (fl(r)) which has an important effect on mass flux. The one published MHD model is isothermal, but confirms that if b=8*pi*p/absolute value(B)2<<l then the field is nearly potential below -70,000 km. Building on the MHD result, we apply a two scale approximation to calculate fl(r). We also compute the global spreading (fg(r)) out to 5.0 RSUN imposed by coronal hole geometry. Global MHD models provide a potent method of calculating fg(r). Unambiguous plume signatures have not yet been found in the solar wind. This is probably due to strong mixing of plume and interplume flows near the Sun. We describe a physical source for strong mixing due to the observed flows being unstable to shear instabilities that lead to rapid disruption.

Suess, Steven T.↗

Resonance Effects in the NASA Transonic Flutter Cascade Facility

Investigations of unsteady pressure loadings on the blades of fans operating near the stall flutter boundary are carried out under simulated conditions in the NASA Transonic Flutter Cascade facility (TFC). It has been observed that for inlet Mach numbers of about 0.8, the cascade flowfield exhibits intense low-frequency pressure oscillations. The origins of these oscillations were not clear. It was speculated that this behavior was either caused by instabilities in the blade separated flow zone or that it was a tunnel resonance phenomenon. It has now been determined that the strong low-frequency oscillations, observed in the TFC facility, are not a cascade phenomenon contributing to blade flutter, but that they are solely caused by the tunnel resonance characteristics. Most likely, the self-induced oscillations originate in the system of exit duct resonators. For sure, the self-induced oscillations can be significantly suppressed for a narrow range of inlet Mach numbers by tuning one of the resonators. A considerable amount of flutter simulation data has been acquired in this facility to date, and therefore it is of interest to know how much this tunnel self-induced flow oscillation influences the experimental data at high subsonic Mach numbers since this facility is being used to simulate flutter in transonic fans. In short, can this body of experimental data still be used reliably to verify computer codes for blade flutter and blade life predictions? To answer this question a study on resonance effects in the NASA TFC facility was carried out. The results, based on spectral and ensemble averaging analysis of the cascade data, showed that the interaction between self-induced oscillations and forced blade motion oscillations is very weak and can generally be neglected. The forced motion data acquired with the mistuned tunnel, when strong self-induced oscillations were present, can be used as reliable forced pressure fluctuations provided that they are extracted from raw data sets by an ensemble averaging procedure.

Lepicovsky, J.↗

Hot-wire Anemometry and Planned Test Entries

- Hot-wire anemometers are sensitive to mass flux and total temperature - Applications for hot-wire anemometry include - Determining the flow quality within a facility - Mapping the flowfield that is influenced by a model - Mean flow distortion - Boundary-layer instabilities & transition - It’s an especially important diagnostic if there is no line of sight - We use a constant temperature anemometer (CTA) at a high overheat & calibrate the wire using a modified King’s Law

Hypersonics↗

Learning About Nucleosynthesis from Multi-dimensional Simulations of Core-Collapse Supernovae

For more than two decades, we have understood that the development of a successful core-collapse supernova is inextricably linked to neutrino heating and three dimensional fluid flows, with large scale hydrodynamic instabilities allowing successful explosions that spherical symmetry would prevent. Unfortunately, our understanding of the nucleosynthesis that occurs in these supernovae, and therefore the impact of supernovae on galactic chemical evolution, has generally ignored much that we have learned about the central engine of these supernovae over the past two decades. Now, with two and three dimensional simulations of core-collapse supernovae run to sufficient duration, we are learning how the multi-dimensional, neutrino-driven character of the explosions directly impacts the nucleosynthesis and other observables of core-collapse supernovae. Here we focus on lessons from multi-dimensional models which implement realistic nuclear reaction networks.

Hix, W Raphael↗

Effects of time-varying ExB flow on slab ion-temperature-gradient turbulence

Effects of time-varying sheared ExB flow on turbulence driven by slab ion temperature gradient instabilities are investigated by means of Landau fluid simulation. Here, the ExB flow, which consists of stationary and time-periodic oscillatory parts, is externally imposed to the turbulence. The dependence on the amplitude and frequency of ExB flow is examined in the case that the amplitude of oscillatory part is the same or less than that of stationary part. The ion heat transport caused by turbulence oscillates with the same period as the ExB flow and the time-averaged transport coefficient is larger than the coefficient which is evaluated without the oscillatory part. The time-averaged coefficient is maximized when the amplitude of oscillatory part is equal to that of stationary part. As the frequency of ExB flow increases, the time-averaged coefficient decreases and is close to the coefficient which is evaluated without the oscillatory part. This mechanism is explained by introducing a kind of the logistic equation which describes the time evolution of transport coefficient as a response of turbulence to the amplitude of ExB flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Eigenmode characteristics of the double tearing mode in the presence of shear flows

The double tearing mode (DTM) is characterized by two eigen states with antisymmetric or symmetric magnetic island structure, referred to as the even or odd DTM. In this work, we systematically revisit the DTM instabilities in the presence of an antisymmetric shear flow with a focus on eigenmode characteristics as well as the stabilization or destabilization mechanism in a wide parameter region. Both initial value simulation and eigenvalue analysis are performed based on reduced resistive MHD model in slab geometry. A degenerated eigen state is found at a critical flow amplitude v{sub c}. The even (or odd) DTM is stabilized (or destabilized) by weak shear flow below v{sub c} through the distortion of magnetic islands mainly due to the global effect of shear flow rather than the local flow shear. The distortion can be quantified by the phase angles of the perturbed flux, showing a perfect correspondence to the growth rates. As the shear flow increases above v{sub c}, the degenerated eigen state bifurcates into two eigen modes with the same growth rate but opposite propagating direction, resulting in an oscillatory growth of fluctuation energy. It is identified that two eigen modes show the single tearing mode structure due to the Alfven resonance (AR) occurring on one current sheet. Most importantly, the AR can destabilize the DTMs through enhancing the plasma flow exerting on the remaining island. Meanwhile, the local flow shear plays a remarkable stabilizing role in this region. In addition, the eigenmode characteristic of the electromagnetic Kelvin-Helmholtz instability is also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A mass-conserving lattice Boltzmann method with dynamic grid refinement for immiscible two-phase flows

A mass-conserving lattice Boltzmann method (LBM) for multiphase flows is presented in this paper. The proposed LBM improves a previous model (Lee and Liu, 2010 [21]) in terms of mass conservation, speed-up, and efficiency, and also extends its capabilities for implementation on non-uniform grids. The presented model consists of a phase-field lattice Boltzmann equation (LBE) for tracking the interface between different fluids and a pressure-evolution LBM for recovering the hydrodynamic properties. In addition to the mass conservation property and the simplicity of the algorithm, the advantages of the current phase-field LBE are that it is an order of magnitude faster than the previous interface tracking LBE proposed by Lee and Liu (2010) [21] and it requires less memory resources for data storage. Meanwhile, the pressure-evolution LBM is equipped with a multi-relaxation-time (MRT) collision operator to facilitate attainability of small relaxation rates thereby allowing simulation of multiphase flows at higher Reynolds numbers. Additionally, we reformulate the presented MRT-LBM on nonuniform grids within an adaptive mesh refinement (AMR) framework. Various benchmark studies such as a rising bubble and a falling drop under buoyancy, droplet splashing on a wet surface, and droplet coalescence onto a fluid interface are conducted to examine the accuracy and versatility of the proposed AMR-LBM. The proposed model is further validated by comparing the results with other LB models on uniform grids. A factor of about 20 in savings of computational resources is achieved by using the proposed AMR-LBM. As a more demanding application, the Kelvin–Helmholtz instability (KHI) of a shear-layer flow is investigated for both density-matched and density-stratified binary fluids. The KHI results of the density-matched fluids are shown to be in good agreement with the benchmark AMR results based on the sharp-interface approach. When a density contrast between the two fluids exists, a typical chaotic structure in the flow field is observed at a Reynolds number of 10000, which indicates that the proposed model is a promising tool for direct numerical simulation of two-phase flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intermittency Model for Coupled CFD-Stability Transition Analysis in Hypersonic Flow

Accurate prediction of aerothermodynamic loads on hypersonic vehicles requires precise modeling of surface quantities across the boundary layer transition zone. The peak heating loads and total heat transfer are determined by parameters such as the transition zone length and the magnitude of potential overshoots in heat flux and skin friction beyond their respective values in fully turbulent flows. While previous studies on CFD integrated transition modeling using linear stability correlations have shown promise in modeling these features, they did not develop an intermittency model for hypersonic flows. This paper presents a data-driven approach to develop a model of this type by correlating experimental transition data with the relevant flow parameters. The resulting model demonstrates significant improvements over previous low-speed models in terms of predicting heat transfer distributions during the transition process associated with first and second mode instabilities in axisymmetric high-speed flows. Separate correlations for flight and ground test conditions are developed, and the potential to combine these correlations is discussed.

Transition↗

Instability waves in twin supersonic jets

Calculations are presented for the characteristics of instability waves in the initial mixing region of twin circular supersonic jets. Two models for the basic jet flow are used. In the first, the jets are modeled as two circular vortex sheets. In the second, realistic velocity and density profiles are used. It is shown that the unsteady flow fields of the two jets interact before the time-averaged jets flows have merged. The normal modes or instability waves are classified by their symmetry properties in the twin-jet case and their asymptotic behavior for large jet separations. Calculations of the growth rates and phase velocities are made for these modes as a function of jet separation and mixing-layer thickness. The associated pressure distributions are also presented. In the realistic jet profile calculations the effect of jet separation is found to be relatively weak. For modes that are even about the symmetry plane between the two jets the pressure levels are found to increase near this plane as the jet separation decreases.

Morris, Philip J.↗

Study of Critical Heat Flux and Two-Phase Pressure Drop Under Reduced Gravity

The design of the two-phase flow systems which are anticipated to be utilized in future spacecraft thermal management systems requires a knowledge of two-phase flow and heat transfer phenomena in reduced gravities. This program was funded by NASA headquarters in response to NRA-91-OSSA-17 and was managed by Lewis Research Center. The main objective of this program was to design and construct a two-phase test loop, and perform a series of normal gravity and aircraft trajectory experiments to study the effect of gravity on the Critical Heat Flux (CHF) and onset of instability. The test loop was packaged on two aircraft racks and was also instrumented to generate data for two-phase pressure drop. The normal gravity tests were performed with vertical up and downflow configurations to bound the effect of gravity on the test parameters. One set of aircraft trajectory tests was performed aboard the NASA DC-9 aircraft. These tests were mainly intended to evaluate the test loop and its operational performance under actual reduced gravity conditions, and to produce preliminary data for the test parameters. The test results were used to demonstrate the applicability of the normal gravity models for prediction of the two-phase friction pressure drop. It was shown that the two-phase friction multipliers for vertical upflow and reduced gravity conditions can be successfully predicted by the appropriate normal gravity models. Limited critical heat flux data showed that the measured CHF under reduced gravities are of the same order of magnitude as the test results with vertical upflow configuration. A simplified correlation was only successful in predicting the measured CHF for low flow rates. Instability tests with vertical upflow showed that flow becomes unstable and critical heat flux occurs at smaller powers when a parallel flow path exists. However, downflow tests and a single reduced gravity instability experiment indicated that the system actually became more stable with a parallel single-phase flow path. Several design modifications have been identified which will improve the system performance for generating reduced gravity data. The modified test loop can provide two-phase flow data for a range of operating conditions and can serve as a test bed for component evaluation.

Abdollahian, Davood↗