Fundamental study in low density gas dynamics Semiannual progress report, Nov. 1, 1966 - May 1, 1967
Experimental flow through annuli in study of rarefied internal gas dynamics
RAREFIED GAS DYNAMICS↗
SEARCH · Engineering Papers
Results for “Flow dynamics”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Wavenumber Vacillation in Weakly-Stratified Baroclinic Flows
The wavenumber selection in an unstable baroclinic flow has long been a subject of investigation in geophysical fluid dynamics. For a weakly unstable flow, the linearly most unstable wave is always the final realized wave. As the flow becomes more unstable, the dominant wave gradually shifts from the most unstable wave to a longer wave. However, when the supercriticality is reduced from the state with a dominant longwave, it may remain in that state even beyond the threshold where it first developed. Hysteresis in a quasigeostrophic system also displays a complex behavior: it occurs not only between the states of different dominant wavenumbers, but also between the states of identical dominant wavenumber but of different dynamic characteristics. In a recent numerical experiment using a high-resolution spectral Eady model with asymmetric Ekman dissipation, it is found that in a weakly stratified flow with strong meridional forcing the flow does not show a preference for any single wave. Instead, the dominant wave periodically varies among the linearly most unstable wave and the longer waves. The mechanism of wavenumber vacillation will be examined in terms of meridional heat flux, the wave PV gradient, and wave saturation. The importance of wave-wave and wave-mean flow interactions will also be investigated.
Chou, Shih-Hung↗
Comparison of Combustion Dynamic Characteristics of Two Advanced Multi-Cup Fuel Injectors
An experimental investigation of the combustion dynamic characteristics of two advanced multi-cup lean direct injectors (LDI) under simulated gas turbine combustor conditions was conducted. The objective was to gain a better understanding of the physical phenomena inside a pressurized flame tube combustion chamber and study the effects of injector flow number on combustion dynamics. The injectors are known as Three-zone Injectors one and two or 3ZI-1 and 3ZI-2, respectively. The injectors were experimentally evaluated at inlet pressures up to 1.724 MPa, non-vitiated air temperatures up to 828K, and adiabatic flame temperatures up to 1975K. Dynamic pressure measurements were taken upstream of the injectors and in the combustion zone. The combustion dynamic behavior of the two injectors was measured over a range of inlet pressures, inlet temperatures, fuel air ratios, and fuel flow splits.
Combustion Dynamics↗
Program to stimulate graduate training in the field of aeroacoustics
An experiment is reported to cross correlate the output of hot film probes located at various points in the flow field of a jet-blown flap with the output of microphones in the acoustic far field. Fluid dynamic measurements of the flow fields of the test configuration are reported.
Becker, R. S.↗
Three-dimensional compressible turbulent computations for a nondiffusing S-duct
The PARC3D code was used to compute the compressible turbulent flow within a three dimensional, nondiffusing S-duct. A frame of reference is provided for future computational fluid dynamics studies of internal flows with strong secondary flows and provides an understanding of the performance characteristics of a typical S-duct with attached flow. The predicted results, obtained with both H- and O-grids, are compared with the experimental wall pressure, static and total pressure fields, and velocity vectors. Additionally, computed boundary layer thickness, velocity profiles in wall coordinates, and skin friction values are presented.
Harloff, G. J.↗
Corrections to fringe distortion due to flow density gradients in optical interferometry
An analytical method is formulated to account for distortions of optical interferograms used for studies of flow over airfoils experiencing dynamic stall. It is shown that such distortions are generated primarily due to optical path deflections in the test flow, caused by large density gradients. Such in-flow optical path deflections are neglected in conventional optical techniques for flow studies. The present method employs a ray analysis to determine these in-flow optical path deflections, and accurately predicts the interferogram distortions.
Cho, Y. C.↗
Impact Of Rotation on the Sun’s Subsurface Structure
It is well known that the dynamical evolution of subsurface flows of the Sun and magnetic fields is strongly linked to rotation. Observational investigation of sub surface structuring and dynamics can be performed only with relatively low resolution using helioseismic inversion techniques. To confidently model the coupling of turbulent convection, magnetic fields, and rotation in the solar interior, we perform advanced radiative hydrodynamic and MHD modeling of local scales. To explore the coupling effects in the upper layers of the convection zone, we present results of analysis from a series of hydrodynamic simulations performed for a 25-Mm-deep computational domain at different latitudes obtained for 1) the Carrington rotation rate at all latitudes and 2) the realistic rotation rate from the global helioseismic inversions during the solar minimum. Using additional 3D radiative hydrodynamic models, we reveal how physical properties of the solar convection are affected by rotation.
Heliophysics↗
F-ANG+: A 3-D Augmented-Stencil Face-Averaged Nodal-Gradient Cell-Centered Finite-Volume Method for Hypersonic Flows
Explore the source record for details and available documents.
Weighted Least-Squares↗
Automated and efficient local adaptive regression for principal component-based reduced-order modeling of turbulent reacting flows
Principal Component Analysis can be used to reduce the cost of Computational Fluid Dynamics simulations of turbulent reacting flows by reducing the dimensionality of the transported variables through projection of the thermochemical state onto a lower-dimensional manifold. However, because of the nonlinearity of the principal component source terms, nonlinear regression techniques must be utilized for the source terms in terms of the principal components. Unfortunately, widely available and utilized nonlinear regression techniques can have prohibitive computational requirements and/or accuracy that is highly dependent on user experience in ad hoc tuning of model architecture and hyperparameters. Here, in this work, a new nonlinear regression approach is proposed that is both computationally efficient and automated so does not require any user input. The approach is evaluated through a priori prediction of principal component source terms using data from a Direct Numerical Simulation of a turbulent nonpremixed n-heptane/air jet flame. In particular, the proposed framework consists of local regressions whose complexity is adapted according to the local nonlinearity of the data: local linear regression when accurate enough and local Artificial Neural Networks when nonlinear regression is required. The number of local clusters for local regression is determined automatically using the Davies-Bouldin index. In addition, Bayesian optimization is utilized for model training (i.e., to select the best architectures and hyperparameters of the nonlinear regressions in an unsupervised fashion), eliminating ad hoc hand-tuning and/or expensive grid searches. Overall, compared to a single, global neural network, the new local adaptive regression approach is shown to have comparable accuracy but 69% less training time due to the utilization of local linear regression and faster training of local neural networks.
42 ENGINEERING↗
A real time interferometry system for unsteady flow measurements
A simple real-time interferometer system was developed for use in dynamic stall and other unsteady flow research at compressible flow speeds. A conventional schlieren system was modified to operate as a point diffraction interferometer. The implementation of this interferometer is discussed, and results of trials with different point diffractors are presented in this paper. The performance of the interferometer under various flow conditions was investigated. Results are presented which show the effects of the interferometer parameters such as pinhole size and pinhole-plate optical density on the performance of the system.
Brock, N. J.↗
Analysis of physical-chemical processes governing SSME internal fluid flows
The efforts to adapt CHAM's computational fluid dynamics code, PHOENICS, to the analysis of flow within the high pressure fuel turbopump (HPFTP) aft-platform seal cavity of the SSME are summarized. In particular, the special purpose PHOENICS satellite and ground station specifically formulated for this application are listed and described, and the preliminary results of the first part two-dimensional analyses are presented and discussed. Planned three-dimensional analyses are also briefly outlined. To further understand the mixing and combustion processes in the SSME fuelside preburners, a single oxygen-hydrogen jet element was investigated.
Singhal, A. K.↗
Preliminary Analysis of the Effect of Flow Separation Due to Rocket Jet Pluming on Aircraft Dynamic Stability During Atmospheric Exit
A theoretical investigation was conducted to determine the effects of body boundary-layer separation resulting from a highly underexpanded jet on the dynamic stability of a typical rocket aircraft during an atmospheric exit trajectory. The particular flight condition studied on a digital computer for five degrees of freedom was at Mach 6.0 and 150,000 feet. In view of the unknown character of the separated flow field, two estimates of the pressures in the separated region were made to calculate the unbalanced forces and moments. These estimates, based on limited fundamental zero-angle-of-attack studies and observations, are believed to cover what may be the actual case. In addition to a fixed control case, two simulated pilot control inputs were studied: rate-limited and instantaneous responses. The resulting-motions with and without boundary-layer separation were compared for various initial conditions. The lower of the assumed misalinement forces and moments led to a situation whereby a slowly damped motion could be satisfactorily controlled with rate-limited control input. The higher assumption led to larger amplitude, divergent motions when the same control rates were used. These motions were damped only when the instantaneous control responses were assumed.
Dryer, Murray↗
Implicit finite-difference simulations of steady and unsteady transonic flows
Implicit methods for several fluid dynamic formulations have been developed and applied to steady-state and low-frequency transonic flows. The basic steps involved in the construction of implicit schemes include: selection of linearly stable accurate implicit difference operators, time-linearization of nonlinear terms, and approximate factorization of the implicit operators into easily solved systems of equations. The proposed schemes are found very efficient for the simpler formulations.
Ballhaus, W. F.↗
An investigation of design optimization using a 2-D viscous flow code with multigrid
Computational fluid dynamics (CFD) codes have advanced to the point where they are effective analytical tools for solving flow fields around complex geometries. There is also a need for their use as a design tool to find optimum aerodynamic shapes. In the area of design, however, a difficulty arises due to the large amount of computer resources required by these codes. It is desired to streamline the design process so that a large number of design options and constraints can be investigated without overloading the system. There are several techniques which have been proposed to help streamline the design process. The feasibility of one of these techniques is investigated. The technique under consideration is the interaction of the geometry change with the flow calculation. The problem of finding the value of camber which maximizes the ratio of lift over drag for a particular airfoil is considered. In order to test out this technique, a particular optimization problem was tried. A NACA 0012 airfoil was considered at free stream Mach number of 0.5 with a zero angle of attack. Camber was added to the mean line of the airfoil. The goal was to find the value of camber for which the ratio of lift over drag is a maximum. The flow code used was FLOMGE which is a two dimensional viscous flow solver which uses multigrid to speed up convergence. A hyperbolic grid generation program was used to construct the grid for each value of camber.
Doria, Michael L.↗
Network Based Estimation of Wind Farm Power and Velocity Data Under Changing Wind Direction
This paper describes an estimation algorithm for velocity and power output signals in a wind farm under changing wind direction. A graph-theoretic definition describes the wind farm as a collection of nodes (turbines) and time-varying weighted edges (inter-turbine wake propagation) that change as a function of incoming wind direction. The velocity at each turbine is determined through a discrete input-output model. Changes in wind direction serve as the input and the output is defined in terms of a time-varying weighted adjacency matrix that depends on the time-delay of information propagation between turbines. These delays, which are defined in terms of the advection speed of the wind and the distance between the turbines, capture the delayed effect of wind direction changes on the inter-connectivity of the graph as the wind conditions at the farm inlet propagate through the turbine array. An event-based update framework is employed to capture time-dependent topology changes due to shifts in wind direction. Simulation results for dynamically changing wind inlet directions to a circular wind farm are compared to predictions from both the static and dynamic versions of the FLOw Redirection and Induction in Steady State (FLORIS) model. The approach is shown to enable real-time tracking of dynamic changes to wind farm power output within a framework that can be easily integrated into real-time, horizon-based, control strategies that typically do not account for wind direction changes.
distributed↗
Analysis of Compressibility Effects and Nonlinear Property Variations in a Supercritical CO2 Mixing Layer
Calculations are performed using the large eddy simulation technique to qualitatively assess the effects of fluid compressibility and thermodynamic nonlinearities on the dynamics of a supercritical flow field. Resulting data are also used to interrogate instantaneous subfilter-scale fields, as modeled by the mixed-dynamic Smagorinsky closure and gradient diffusion model. A three-dimensional wall-resolved calculation of a spatially evolving mixing layer composed solely of carbon dioxide is performed. This is followed by a coarse grid calculation to examine model performance as a function of resolution. Theoretical analysis indicates that the partial derivatives of density with respect to pressure and temperature are important modulators of the temperature and pressure field evolution, respectively. Results pertaining to subfilter velocity-velocity and velocity-temperature fields indicate that the models are most stressed in the regions where compressibility and thermo-fluid nonlinearities dominate the physics.
42 ENGINEERING↗
A review of turbomachinery blade-row interaction research
Analytical and experimental research in the area of unsteady aerodynamics of turbomachinery has conventionally been applied to blading which oscillates when placed in a uniformly flowing fluid. Comparatively less effort has been offered for the study of blading which is subjected to nonuniformities within the flow field. The fluid dynamic environment of a blade-row embedded within multi-stage turbomachines is dominated by such highly unsteady fluid flow conditions. The production of wakes and circumferential pressure variations from adjacent blade-rows causes large unsteady energy transfers between the fluid and the blades. Determination of the forced response of a blade requires the ability to predict the unsteady loads which are induced by these aerodynamic sources. A review of research publications was done to determine recent investigations of the response of turbomachinery blading subjected to aerodynamic excitations. Such excitations are a direct result of the blade-row aerodynamic interaction which occurs between adjacent cascades of blades. The reports and papers reviewed have been organized into areas emphasizing experimental or analytical efforts.
Smith, Todd E.↗
Acoustics and dynamics of coaxial interacting vortex rings
Using a contour dynamics method for inviscid axisymmetric flow we examine the effects of core deformation on the dynamics and acoustic signatures of coaxial interacting vortex rings. Both 'passage' and 'collision' (head-on) interactions are studied for initially identical vortices. Good correspondence with experiments is obtained. A simple model which retains only the elliptic degree of freedom in the core shape is used to explain some of the calculated features.
Shariff, Karim↗