Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Feasibility Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

SU-F-J-114: On-Treatment Imagereconstruction Using Transit Images of Treatment Beams Through Patient and Thosethrough Planning CT Images

Purpose: To reconstruct patient images at the time of radiation delivery using measured transit images of treatment beams through patient and calculated transit images through planning CT images. Methods: We hypothesize that the ratio of the measured transit images to the calculated images may provide changed amounts of the patient image between times of planning CT and treatment. To test, we have devised lung phantoms with a tumor object (3-cm diameter) placed at iso-center (simulating planning CT) and off-center by 1 cm (simulating treatment). CT images of the two phantoms were acquired; the image of the off-centered phantom, unavailable clinically, represents the reference on-treatment image in the image quality of planning CT. Cine-transit images through the two phantoms were also acquired in EPID from a non-modulated 6 MV beam when the gantry was rotated 360 degrees; the image through the centered phantom simulates calculated image. While the current study is a feasibility study, in reality our computational EPID model can be applicable in providing accurate transit image from MC simulation. Changed MV HU values were reconstructed from the ratio between two EPID projection data, converted to KV HU values, and added to the planning CT, thereby reconstructing the on-treatment image of the patient limited to the irradiated region of the phantom. Results: The reconstructed image was compared with the reference image. Except for local HU differences>200 as a maximum, excellent agreement was found. The average difference across the entire image was 16.2 HU. Conclusion: We have demonstrated the feasibility of a method of reconstructing on-treatment images of a patient using EPID image and planning CT images. Further studies will include resolving the local HU differences and investigation on the dosimetry impact of the reconstructed image.

60 APPLIED LIFE SCIENCES↗

Hydrogen Storage for Load-Following and Clean Power: Duct-firing of Hydrogen to Improve the Capacity Factor of NGCC Plants (Final Report, Phase I Conceptual Study)

The 12-month Feasibility study in Phase I study was completed and confirmed the system is feasible and the proposed system is an improvement over alternate low carbon dispatchable power options. Our demonstration will include 54 MWh of hydrogen storage. CO 2 capture inherent to the CHG process can capture 90% of the CO 2 (with upgrades to >98%) in a commercial system (~300 MWth) for sequestration or other uses. The hydrogen will be utilized in a duct burner in a Heat Recovery Steam Generator (HRSG) integrated with the existing Southern Company fossil asset. Here, the firing rate of the duct burner is varied to let the plant respond to fluctuations of electrical load. However, H 2 production is relatively constant by storing H 2 , and revenues are improved by arbitrage between use of low-cost off-peak variable electricity generation or use of stored H 2 under peak demand. The study enabled the fidelity of the concept to be improved and allowed identification of the requirements for the system. Defining the individual system and component requirements was performed via system requirements review with the whole team. These requirements were then incorporated into/iterated with our Heat & Mass Balance models and process flow diagrams were generated to reflect the overall system. This information was then used to complete the TEA and show economic feasibility. Our system generates power at 17.4% lower cost than other low carbon approaches for the H 2 generation, H 2 compression and storage, carbon sequestration, and HRSG added electricity production for a large-scale duct-fired system. Our team recommends completing the Phase II Pre-FEED study for the proposed system as the next step for the project and its tasks will achieve the overall objective and be ready to launch the FEED. The Pre-FEED tasks include updating the requirements, Concept of Operations, plant scope/process description, component modeling, system modeling, performance estimates, emission estimates, block flow diagrams, fluid/process conditions (PFD), utility usage, and facility sizing/definition. The approach will be to complete these updates in a greater level of detail for the selected site. The approach for developing the EIV is to use the updated results, including model outputs, for carbon dioxide and waste streams.

03 NATURAL GAS↗

Csi-star: a Low-cost CSI Orbital Testbed

The topics are presented in viewgraph form and include the following: rationale for an on-orbit control-structurs interaction (CSI) test facility; CSI flight experiment objectives; feasibility study objectives; CSI free-flyer solution; feasibility study technical status summary; CSI-Star - a low-cost CSI free flyer; conceptual experiment design - option 2 configuration; Delta 2 - Quickstar Interface clambband capability; open and closed loop response of baselined truss with active struts; experiment weight baseline (option 1) configuration; experiment weight option 2 configuration; experiment power baseline (option 1) configuration; experiment power option 2 configuration; CSI Quickstar capabilities/requirements; and remaining work.

Edberg, D.↗

Macromolecular Crystal Growth by Means of Microfluidics

We have performed a feasibility study in which we show that chip-based, microfluidic (LabChip(TM)) technology is suitable for protein crystal growth. This technology allows for accurate and reliable dispensing and mixing of very small volumes while minimizing bubble formation in the crystallization mixture. The amount of (protein) solution remaining after completion of an experiment is minimal, which makes this technique efficient and attractive for use with proteins, which are difficult or expensive to obtain. The nature of LabChip(TM) technology renders it highly amenable to automation. Protein crystals obtained in our initial feasibility studies were of excellent quality as determined by X-ray diffraction. Subsequent to the feasibility study, we designed and produced the first LabChip(TM) device specifically for protein crystallization in batch mode. It can reliably dispense and mix from a range of solution constituents into two independent growth wells. We are currently testing this design to prove its efficacy for protein crystallization optimization experiments. In the near future we will expand our design to incorporate up to 10 growth wells per LabChip(TM) device. Upon completion, additional crystallization techniques such as vapor diffusion and liquid-liquid diffusion will be accommodated. Macromolecular crystallization using microfluidic technology is envisioned as a fully automated system, which will use the 'tele-science' concept of remote operation and will be developed into a research facility for the International Space Station as well as on the ground.

vanderWoerd, Mark↗

Hydropower Development Opportunities for Alaska Native Villages

As a part of the Department of Energy’s (DOE) 2014 study on hydropower new stream-reach development (NSD) opportunities in the U.S., Oak Ridge National Laboratory (ORNL) coordinated with the Alaskan Energy Authority (AEA) and the United States Army Corps of Engineers to assess Alaska’s undeveloped hydropower potential at sites where no dams currently exist. That study identified 437 feasible sites with a combined capacity of 4,723 MW (Kao et al., 2014). In 2016, ORNL met with the U.S. Department of Energy-Alaska Office to discuss hydropower development opportunities to support Alaska Native villages. ORNL, with AEA’ collaboration is evaluating opportunities to increase renewable energy generation for these villages based on the NSD assessment, recent project license applications, and candidate Alaska Renewable Energy Fund projects.Using data for village location, population, diesel consumption, generation and cost, and proximity to existing hydropower and transmission, an initial NSD site feasibility study was performed. To screen out villages and potential hydropower sites that did not meet high-level feasibility criteria, seven filters were used. Based on these filter values, only eleven villages passed all criteria. These eleven hydropower sites have a combined potential capacity of 2.95MW and could supply an estimated 12,934 MWh of renewable hydropower annually. Results indicate that these eleven villages could potentially reduce their total diesel usage by 520,000 gallons per year, which amounts to a present-day value of 50-year diesel savings totaling more than $57 million by tapping into this potential. Follow-up data collection, reconnaissance studies, and pre-feasibility analyses could provide more insight into hydropower development opportunities for Alaska Native villages and focus on the most promising development opportunities identified through this initial study.

Hadjerioua, Boualem↗

Potential Availability of Alternative Fuel to Supply Maritime Activities in Pacific Northwest Ports

The international shipping sector represented 3% of global greenhouse gas emissions in 2023 (Office of Energy Efficiency & Renewable Energy 2024). International shipping has been classified as a difficult-to-decarbonize industry (IRENA 2024). In an effort to drive decarbonization, the U.S. Department of Energy has partnered with Mission Innovation to co-lead the Zero-Emission Shipping Mission, which launched in 2021(Office of Energy Efficiency & Renewable Energy 2021). In addition, the U.S. Department of State partnered with Norway to launch the Green Shipping Challenge in 2022 (Office of the Spokesperson 2022b). As part of the ZESM and Green Shipping Challenge, the United States is collaborating with the Republic of Korea (ROK) to develop a green shipping corridor (U.S. Mission Korea 2023). The United States and ROK have conducted a pre-feasibility study as the first step in developing a green shipping corridor between the countries. The ports included in the study are Seattle, Tacoma, and Everette in the U.S. Pacific Northwest (PNW) and Busan, Ulsan, and Masan in ROK. The National Renewable Energy Laboratory's role in the study was to analyze the availability and technical potential of alternative marine fuels in proximity to U.S. PNW ports. The findings show most of the existing alternative fuel capacity within the region is from renewable diesel, biodiesel, and sustainable aviation fuel facilities. The largest growth in fuel capacity in the region by 2030 is projected to be in renewable diesel and hydrogen. The overall technical readiness of non-drop-in alternative fuel production and conversion technologies is more developed than alternative-fueled ships and associated fueling infrastructure. However, much of the fuel capacity in the region is comprised of drop-in fuels, making it technically possible to use existing infrastructure for transporting and bunkering to the existing fleet. Data to inform regional alternative fuel quantity estimations were collected from an extensive review of databases, reports, announcements, and other publicly available resources. A maturity index and sector competition factor were applied to announced fuel projects to determine the quantity of alternative fuel available to the marine sector in the region by 2030. Demand data were collected from fuel bunkering logs covering the PNW seaports (State of Washington 2021). Both supply and demand data were converted to very-low sulfur fuel oil gallon equivalents (VLSFO-GE) for better comparison. Qualitative data were gathered through interviews with stakeholders, project developers, and industry experts. Total alternative fuel capacity available to the marine sector in the region is estimated to be 824 million VLSFO-GE per year by 2030. This is sufficient to cover the requirements of a green shipping corridor between the United States and ROK. The findings from this report are being used to inform detailed feasibility studies for several U.S. PNW -ROK green shipping corridors. Updates from the U.S. PNW - ROK feasibility studies will continue to be published on Mission Innovation's green corridor tracking website (Zero Emission Shipping Mission, n.d.). In addition, this report has helped to inform further work on shipping decarbonization in the U.S. PNW, including the Pacific Northwest to Alaska Green Corridor focused on cruise vessels.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DRACO Flowpath Performance and Environments

The Advanced Space Transportation (AST) project office has challenged NASA to design, manufacture, ground-test and flight-test an axisymmetric, hydrocarbon-fueled, flight-weight, ejector-ramjet engine system testbed no later than 2005. To accomplish this, a multi-center NASA team has been assembled. The goal of this team, led by NASA-Marshall Space Flight Center (MSFC), is to develop propulsion technologies that demonstrate rocket and airbreathing combined-cycle operation (DRACO). Current technical activities include flowpath conceptual design, engine systems conceptual design, and feasibility studies investigating the integration and operation of the DRACO engine with a Lockheed D-21B drone. This paper focuses on the activities of the Flowpath Systems Product Development Team (PDT), led by NASA-Glenn Research Center (GRC) and supported by NASA-MSFC and TechLand Research, Inc. The objective of the Flowpath PDT at the start of the DRACO program was to establish a conceptual design of the flowpath aerodynamic lines, determine the preliminary performance, define the internal environments, and support the DRACO testbed concept feasibility studies. To accomplish these tasks, the PDT convened to establish a baseline flowpath concept. With the conceptual lines defined, cycle analysis tasks were planned and the flowpath performance and internal environments were defined. Additionally, sensitivity studies investigating the effects of inlet reference area, combustion performance, and combustor/nozzle materials selection were performed to support the Flowpath PDT design process. Results of these tasks are the emphasis of this paper and are intended to verify the feasibility of the DRACO flowpath and engine system as well as identify the primary technical challenges inherent in the flight-weight design of an advanced propulsion technology demonstration engine. Preliminary cycle performance decks were developed to support the testbed concept feasibility studies but are not discussed further in this paper.

Komar, D. R.↗

Geologic Sequestration of CO2 in Deep, Unmineable Coalbeds: An Integrated Researdh and Commercial-Scale Field Demonstration Project

The Coal-Seq consortium is a government-industry collaborative consortium with the objective of advancing industry's understanding of complex coalbed methane and gas shale reservoir behavior in the presence of multi-component gases via laboratory experiments, theoretical model development and field validation studies. This will allow primary recovery, enhanced recovery and CO{sub 2} sequestration operations to be commercially enhanced and/or economically deployed. The project was initially launched in 2000 as a U.S. Department of Energy sponsored investigation into CO{sub 2} sequestration in deep, unmineable coalseams. The initial project accomplished a number of important objectives, which mainly revolved around performing baseline experimental studies, documenting and analyzing existing field projects, and establishing a global network for technology exchange. The results from that Phase have been documented in a series of reports which are publicly available. An important outcome of the initial phase was that serious limitations were uncovered in our knowledge of reservoir behavior when CO{sub 2} is injected into coal. To address these limitations, the project was extended in 2005 as a government-industry collaborative consortium. Selected accomplishments from this phase have included the identification and/or development of new models for multi-component sorption and diffusion, laboratory studies of coal geomechanical and permeability behavior with CO{sub 2} injection, additional field validation studies, and continued global technology exchange. Further continuation of the consortium is currently being considered. Some of the topics that have been identified for investigation include further model development/refinement related to multicomponent equations-of-state, sorption and diffusion behavior, geomechanical and permeability studies, technical and economic feasibility studies for major international coal basins, the extension of the work to gas shale reservoirs, and continued global technology exchange.

01 COAL, LIGNITE, AND PEAT↗

Hollow fiber membrane systems for advanced life support systems

The practicability of utilizing hollow fiber membranes in vehicular and portable life support system applications is described. A preliminary screening of potential advanced life support applications resulted in the selection of five applications for feasibility study and testing. As a result of the feasibility study and testing, three applications, heat rejection, deaeration, and bacteria filtration, were chosen for breadboard development testing; breadboard hardware was manufactured and tested, and the physical properties of the hollow fiber membrane assemblies are characterized.

Roebelen, G. J., Jr.↗

Hollow fiber membranes for advanced life support systems

This paper describes an investigation of the practicability of utilizing hollow fiber membranes in vehicular and portable life support system applications. A preliminary screening of potential advanced life support applications resulted in the selection of five applications for feasibility study and testing. As a result of the feasibility study and testing, three applications, heat rejection, deaeration, and bacteria filtration, were chosen for breadboard development testing. Breadboard hardware has been manufactured and tested, and the physical properties of the three hollow fiber membrane assemblies applicable to use aboard future spacecraft have been characterized.

Roebelen, G. J., Jr.↗

Fabrication of rodlets with coated and lined Mo-alloy cladding for testing and irradiation

Molybdenum alloy fuel cladding with an outer protective layer has been proposed to achieve enhanced tolerance to severe loss of coolant accidents for light water reactors. The accident tolerant fuel cladding will need to meet stringent fuel reliability requirements and significantly delay steam reaction during a severe accident to provide plant operators additional coping time to recover from the accident. A laboratory measurable target for this feasibility study with coated Mo cladding is to demonstrate its capability to survive in steam and maintain fuel rods in coolable geometry at 1200-1500 Celsius degrees for at least 24 hours. Preliminary studies indicate such a capability may provide additional coying of 4-19 hours. A feasibility study undertaken since 2012 has demonstrated feasibility of fabricating long, thin-wall Mo and Mo-ODS tubes, and forming a metallurgically bonded protective coating of FeCrAl or Zr-alloy via physical vapor deposition to provide protection of the Mo cladding in 1200 C. degrees for 24 hours. The diametral ductility of the Mo and Mo-ODS thin wall tubes can be increased to 5-15% pre-irradiation to meet fuel operational requirements. Fabrication of the outer protective layer using thermo-mechanical processing, such as hot isostatic pressing and hot coextrusion, has been under evaluation to achieve high quality lined Mo cladding from commercial scale production. Welding of lined Mo tubes to end-caps are being developed using a combination of solid state welding of laser or electron beam seal welding. Rodlets of lined Mo tubes are being fabricated for further testing to validate its reliability under normal operation and capability of accident tolerance to the 1200- 1500 C. degrees range. Test reactor irradiation is also being planned. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Progress on ATF development of SiC for LWR

Since 2011, Toshiba has been participating in a study whose objective is the commercial utilization of SiC instead of Zircaloy as LWR fuel material. During the period (Phase-1) from 2012 to 2015, feasibility studies on material design and fabrication were performed. This paper reports the principal results of a comprehensive feasibility study on SiC involving experiments and trial fabrication in terms of material properties, core and fuel design, and analytical simulation for safety analysis. The principal results are summarized as follows. First, the fabrication trials for the reduced scales of channel box and cladding have been successfully performed. Secondly, with regard to fuel rod performance analysis, hoop stress during normal operation may be a potential issue in fuel mechanical design as it is relatively high. Thirdly, with regard to safety analysis, the hydrogen generation of SiC fuel tends to decrease significantly compared with that of Zircaloy fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

ZBLAN Fiber Phase B Study

A Phase B feasibility study will be performed for the study of the effects of microgravity on the preform processing and fiber pulling of ZBLAN optical glass. Continuing from the positive results achieved in the fiber annealing experiments in 20 second intervals at 0.001 g on the KC-135 and the 5 minute experiments on the SPAR rocket, experiments will continue to work towards design of a fiber sting to initiate fiber pulling operations in space. Anticipated results include less homogeneous nucleation than ground-based annealed fibers. Infrared Fiber Systems and Galileo are the participating industrial investigators.

Workman, Gary L.↗

Short-Haul Revitalization Study Final Report

A feasibility study was performed for an advanced commercial short-haul aircraft to evaluate the potential for increased service for short-haul flights that operate out of regional and community airports. An analysis of potential origin-destination markets and trip distances resulted in a seat capacity selection of 48 passengers and a design range of 600 NM. A down-select of advanced technologies resulted in a hybrid-electric propulsion system being chosen as the primary enabling technology. A conceptual design of the advanced aircraft was developed, and a mission and sizing analysis was performed, comparing variants of the advanced aircraft with different levels of electrification. Fairly aggressive levels of electrification and battery specific energy are needed for the hybridelectric architecture to realize any benefit in terms of total energy cost for the 600 NM design mission. The development and operational costs were estimated for the advanced aircraft and compared to the baseline. This analysis demonstrated the negative effect of the cost to develop the hybrid-electric technology on the eventual operating cost. A market analysis was performed to determine possible passenger demand for the advanced shorthaul aircraft. According to the market analysis, there is potential demand for such an aircraft, but not necessarily in many of the smaller regional and community airports that were the intended beneficiaries of this new aircraft concept.

Marien, Ty V.↗

TriTruss Packaging and Deployment Trade Study

An architecture and feasibility study of next generation In-Space Assembled Telescopes (iSAT) concluded that robotic in-space assembly of modular components is necessary to enable large (>15-meter diameter) primary apertures. The iSAT study recommended that the foundational structure be assembled from modular TriTruss modules that are packaged for launch, deployed on-orbit and robotically assembled into the final configuration. This paper will describe and summarize the results of a trade study that investigated viable concept of operations (ConOps) for the packaging and deployment (P&D) of individual planar TriTruss modules that could be assembled to form a large aperture iSAT. The ideal TriTruss P&D concept is defined as one that: allows for efficient packaging; has sufficient geometric versatility to be launch vehicle independent; provides a stiff and lightweight structure; has low mechanical complexity; and has component modularity. The P&D concept should allow for prelaunch subsystem or utility integration if required. The concept would be kinematically simple and be robotically deployed using a minimum number of specialized tools. In this first phase of an ongoing more comprehensive trade study, concepts were proposed and then evaluated based on initial metrics representing features of an ideal P&D concept. The P&D concepts evaluated are categorized as: core collapse, face collapse, and erectable structures. Sub-scale models were constructed to help understand the kinematics and mechanical complexity required to enable P&D. Based on a weighting scale, the most promising candidate P&D concepts have selected and will undergo more rigorous structural design, analysis, and testing in the study’s next phase. The ultimate goal of the comprehensive trade study will be to recommend a single TriTruss design and associated P&D concept that will be built and evaluated at NASA Langley Research Center’s In-Space Assembly Laboratory.

in-space assembly (ISA)↗

Review of polarized ion sources (invited)

Recent progress in polarized ion sources development is reviewed. New techniques for production of polarized H{sup -} ion (proton), D{sup -} (D{sup +}), and {sup 3}He{sup ++} ion beams are discussed. Feasibility studies of these techniques are in progress at BNL and other laboratories. Polarized deuteron beams will be required for the polarization program at the Dubna Nuclotron and at the deuteron electric dipole moment experiment at BNL. Experiments with polarized {sup 3}He{sup ++} ion beams are a part of the experimental program at the future electron ion collider.

43 PARTICLE ACCELERATORS↗

Airborne Doppler radar detection of low altitude windshear

As part of an integrated windshear program, the Federal Aviation Administration, jointly with NASA, is sponsoring a research effort to develop airborne sensor technology for the detection of low altitude windshear during aircraft take-off and landing. One sensor being considered is microwave Doppler radar operating at X-band or above. Using a Microburst/Clutter/Radar simulation program, a preliminary feasibility study was conducted to assess the performance of Doppler radars for this application. Preliminary results from this study are presented. Analysis show, that using bin-to-bin Automatic Gain Control (AGC), clutter filtering, limited detection range, and suitable antenna tilt management, windshear from a wet microburst can be accurately detected 10 to 65 seconds (.75 to 5 km) in front of the aircraft. Although a performance improvement can be obtained at higher frequency, the baseline X-band system that was simulated detected the presence of a windshear hazard for the dry microburst. Although this study indicates the feasibility of using an airborne Doppler radar to detect low altitude microburst windshear, further detailed studies, including future flight experiments, will be required to completely characterize the capabilities and limitations.

Bracalente, Emedio M.↗

Brigham City Hydro Generation Project

Brigham City owns and operates its own municipal power system which currently includes several hydroelectric facilities. This project was to update the efficiency and capacity of current hydro production due to increased water flow demands that could pass through existing generation facilities. During 2006-2012, this project completed efficiency evaluation as it related to its main objective by completing a feasibility study, undergoing necessary City Council approvals and required federal environmental reviews. As a result of Phase 1 of the project, a feasibility study was conducted to determine feasibility of hydro and solar portions of the original proposal. The results indicated that the existing Hydro plant which was constructed in the 1960’s was running at approximately 77% efficiency or less. Brigham City proposes that the efficiency calculations be refined to determine the economic feasibility of improving or replacing the existing equipment with new high efficiency equipment design specifically for the site. Brigham City completed the Feasibility Assessment of this project, and determined that the Upper Hydro that supplies the main culinary water to the city was feasible to continue with. Brigham City Council provided their approval of feasibility assessment’s results. The Upper Hydro Project include removal of the existing powerhouse equipment and controls and demolition of a section of concrete encased penstock, replacement of penstock just upstream of the turbine inlet, turbine bypass, turbine shut-off and bypass valves, turbine and generator package, control equipment, assembly, start-up, commissioning, Supervisory Control And Data Acquisition (SCADA), and the replacement of a section of conductors to the step-up transformer. Brigham City increased the existing 575 KW turbine and generator with an 825 KW turbine and generator. Following the results of the feasibility assessment Brigham City pursued required environmental reviews with the DOE and the U.S. Fish and Wildlife Services (USFWS) concurring with the National Environmental Policy Act of 1969 (NEPA) It was determined that Brigham City’s Upper Hydroelectric Power Plant upgrade would have no effect to federally listed or candidate species. However Brigham City has contributed a onetime lump sum towards Bonneville cutthroat trout conservation in the Northern Bonneville Geographic Management Unit with the intention to offset any impacts from the Upper Hydro Project needed to move forward with design and construction and is sufficient for NEPA compliance. No work was done in the river or river bank. During construction, the penstock was disconnected and water was diverted through and existing system around the powerhouse and back into the water system. The penstock, which is currently a 30-inch steel pipe, would be removed and replaced with a new section of 30-inch pipe. Brigham City worked with the DOE and was awarded a new modification and the permission to proceed with Phase III of our Hydro Project in Dec. 2013; with the exception to the modification of the award for the construction phase. Brigham City developed and issued a Request for Proposal for Engineer and Design vendor. Sunrise Engineering was selected for the Design and throughout the Construction Phase of the Upper Hydroelectric Power Plant. Brigham City conducted a Kickoff Meeting with Sunrise June 28, 2013 and received a Scope of Work Brigham City along with engineering firm sent out a RFP for Turbine, Generator and Equipment for Upper Hydro. We select Turbine/Generator Equipment from Canyon Industries located in Deming, WA. DOE awarded Brigham City a new modification and the permission to proceed with Phase III Construction of our Hydro Project. Brigham City Crews removed existing turbine/generator and old equipment alone with feeder wires coming into the building basically giving Caribou Construction an empty shell to begin demolition. Brigham City contracted with Caribou Construction from Jerome, Idaho for the Upper Power Plant construction. A kickoff meeting was June 24, 2014 and demolition was immediately started on building. Because of a delivery delay of Turbine, Generator and Equipment from Canyon Brigham City had to request another extension for the final date of completion. DOE awarded modification (.007) to Brigham City with a new completion date of August 1, 2015. The Turbine has had a few adjustments to help with efficiency; but the Generator had a slight vibration when generator got hot so Canyon Industries had U S Motor’s that manufactured the generator come to check out the issue. The other Equipment seems to be running normal. Brigham City, Sunrise Engineering and Canyon Industries met to determine what the vibration in the generator was and how to solve the issue Us Motor’s found some welds that failed: they have been repaired. U S Motor’s delivered the repaired generator Feb. 17, 2015. Canyon Industries arranged for a crane to installed generator in Power Plant. U S Motor’s balanced and wired generator. Plant Operators put the generator back on line. Canyon Industries returned and gave their approval to keep Hydro online. After Hydro was put back into operations it kept going off line because of overheating issues. Canyon Industries returned and replaced sensors and adjusted them to the proper settings for normal operations. Brigham City added additional steel screens to windows to increase air flow in Power Plant Building. After construction phase of the Upper Hydro Plant some landscaping has been restored around the building additional gravel brought in and leveled out and the road that was cut through for conduits to run wires. A retaining wall was installed to protect penstock. The Upper Hydro Plant is complete and in full operations. The final reimbursement was submitted.

13 HYDRO ENERGY↗