Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FIGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Acoustic Techniques for Density and Mass Flow in Enrichment Plants

In recent years, the IAEA has pursued innovative techniques and an integrated suite of safeguards measures to address the verification challenges posed by advanced centrifuge technologies and the growth in capacity at gaseous centrifuge enrichment plants (GCEPs) [1; 2]. A prominent theme in the development of a new generation of safeguards measures for GCEPs is the use of permanently installed, unattended instruments that can provide continuous monitoring of facility activities, while also reducing the need for on-site inspections [3]. For example, the U.S. Support Program to the IAEA leads the development of an On-Line Enrichment Monitor (OLEM) [4; 5] and an Unattended Cylinder Verification Station (UCVS) [6]. OLEM units will provide continuous enrichment measurement for 100% of the declared gas flowing through unit header pipes, thereby improving the IAEA’s capabilities to verify operator declarations of enrichment. The OLEM concept requires an accurate determination of gas density in order to produce accurate enrichment calculations (Fig. 1). The current OLEM design assumes that this gas density is derived from a pressure transducer signal shared with the operator. The IAEA has expressed the desire for a technology that can independently and noninvasively measures gas density, in support of a next-generation OLEM design.

IAEA, Enrichment Plants, Acoustic Techniques, OLEM↗

Simulation of Uranium(VI) Speciation and Sorption in Montmorillonite Clay in the Presence of Calcite Impurities

Montmorillonite is an abundant clay mineral that has been identified as the primary component in engineered bentonite barrier systems in future nuclear waste repositories. Selective sorption onto planar and edge surfaces of clay particles make it a great candidate for the attentuation of uranium(VI). Although previous works have investigated uranium(VI) interactions with this clay, few have done so in the presence of calcite, a mineral impurity in bentonite that is understood to alter U(VI) speciation, sorption, and consequently its mobility. PHREEQC software is used to simulate the chemical solution speciation of U(VI) under various known repository conditions, in the absence and presence of calcite, and across a range of U(VI)concentrations (1.0E-7 to 1.0E 5 M), and partial pressures of CO 2 (zero to 2% CO2) (Fig. 1). In addition, the kinetic dissolution of calcite is simulated to gain a better understanding of how quickly chemical equilibrium can be reached in these systems. Lastly, surface complexation models will be developed to characterize the influence of calcite impurities on the formation of ternary U(VI)-Ca-carbonate solution species on U(VI) sorption behavior. Our results indiciate that the presence of Ca 2+ and CO 3 2- ions released from calcite leads to U(VI)-Ca-carbonate species with a negative or neutral charge even without the presence of CO 2 . Quantification of these species will allow for the development of more accurate U(VI)-montmorillonite sorption models. Calcite precipitation at alkaline pH further complicates speciation by creating a competation for Ca 2+ . This research is being performed using funding received from the DOE Office of Nuclear Energy’s NEUP.

Pistorino, Jonathan C.↗

A numerical study on the sooting tendencies of bio-derived fuels for spark-ignition engines

While more efficient vehicles have been developed over the decades, their performance is limited by the properties of existing fuels. In response, the Co-Optimization of Fuels and Engines Initiative (Co-Optima) under the U.S. Department of Energy (DOE) has developed a rigorous screening approach to identify the most promising biomass-derived blendstocks that are suitable for advanced spark-ignition (SI) engines. A detailed kinetic model has also been developed to predict the combustion properties of the selected blendstocks. This kinetic model has been designed mainly targeting ignition and flame propagation properties, and it has not previously been validated for soot formation. In this work, we numerically predicted the sooting tendency of 20 Co-Optima SI blendstocks using the Co-Optima kinetic model. The sooting tendencies are determined quantitatively using the Yield Sooting Index (YSI) methodology. As shown in Fig. 1, the predicted YSIs show good agreement with measurements, except for 2,5-dimethylfuran. We also quantify the sensitivity of the YSI predictions to aromatic growth reactions and fuel decomposition reactions of the test fuels. It is found that PAH growth reactions have little impact on YSIs for all 20 fuels under investigation. On the other hand, fuel decomposition reactions have a significant influence on the YSI of 2,5-dimethylfuran. Perturbing their reaction rates by a factor of two is shown to lead to 11 % YSI prediction uncertainty.

09 BIOMASS FUELS↗

Tropospheric Temperature

The 2020 annual global lower tropospheric temperature (LTT) tied with 2016 as the highest on record. The annual average LTT was 0.49°–0.72°C above the 1981–2010 average, depending on dataset, and 10%–16% of Earth’s surface experienced record high temperatures (Plate 2.1e). Such expansive and record warmth is notable because it occurred even though the ENSO exhibited neutral or La Niña conditions throughout the year (Fig. 2.7a) and is thus consistent with the background upward trend since 1958.

54 ENVIRONMENTAL SCIENCES↗

Frequency and Temporal Analysis of Cicada Brood X Sounds

Cicadas are insects that belong to the order Hemiptera (i.e., true bugs). They feed on plant fluids above and below ground. Cicada species fall into two categories: periodical and annual. Seven species of periodical cicadas have been identified, emerging in 13-, 17-, and 21-year cycles [1]. The largest brood (i.e., periodical cicadas of the same cycle) of 17-year cicadas is Brood X, examples of which are shown in Fig. 1. Male cicadas produce the loudest sounds of the insect world. A single male can produce a clicking sound that exceeds 100 dB sound pressure level. This male cicada sound emanates from an organ called the tympanic membrane, which is located on both sides of the body near the base of the wing [2]. The vibrations from this organ generate the sound. Female cicadas make a similar— although less loud—clicking sound with their wings. Figure 2 shows the locations of active cicadas within the United States.

59 BASIC BIOLOGICAL SCIENCES↗

Colossal Grains for a New Structural Paradigm in Thin-Film Photovoltaics

II-VI based thin-film photovoltaics (PV) have experienced substantial commercial success on a foundation of fast large-scale deposition and processing. This type of processing, regardless of material type, nearly always results in small grain (nm to several um diameters) polycrystalline material that, if not for effective grain boundary (GB) and defect passivation, would severely limit PV performance. In the case of CdTe based PV technology, the nearly ubiquitous CdCl2 treatment is used, in part, to passivate the polycrystalline p-type absorber even though Cl is known to (and used to) compensate p-type II-VI materials. Given that VOC is still the most limited performance metric and it can only be improved through higher p-type absorber concentrations, CdCl2 treatments may be holding the technology back. In this talk, we will discuss results related to a process by which small grain CdSeTe material is rapidly transformed into very large grain material (100-1000um diameters, Fig. 1a). This explosive recrystallization, which we have termed colossal grain growth (CGG), occurs by a Cl free process with thin films (<10um) deposited using the same fast deposition techniques the industry has relied on for more than a decade. Our modeling suggests that GB recombination becomes significantly less important at these grain sizes and thus may eliminate the need for a CdCl2 treatment. This result is complimented by previous results of epitaxial growth at high rates on single crystal seed layers. Thin CdSeTe CGG seed layers can be used for rapid epitaxy of CdTe to complete a standard device stack (Fig.1b). This is an optimistic view and the current limitations and challenges related to this process and these materials will also be discussed, including alloy and substrate roughness sensitivity, intragrain material quality, and complex defect chemistry. These challenges are not insignificant but overcoming them may enable a new structural paradigm for thin-film PV.

CdTe↗

Introduction to Special Relativity

The goal of this lecture is to introduce the student to the theory of Special Relativity. Not to overload the content with mathematics, the author will stick to the simplest cases; in particular only reference frames using Cartesian coordinates and translating along the common x-axis as in Fig. 1 will be used. The general expressions will be quoted or may be found in the cited literature.

43 PARTICLE ACCELERATORS↗

Experimental Validation of a Spectral-Based Structural Analysis Model Implemented in the Design of the VolturnUS 6MW Floating Offshore Wind Turbine

The following work presents a spectral-based structural analysis method implemented in the design of the VolturnUS 6MW Floating Offshore Wind Turbine hull developed to increase system optimization. To begin, a description of the methodology is provided which details how transfer functions relate the hull's structural response to first order wave kinematics and wind turbine aerodynamics. Following the model definition, focus is placed on model validation using results from an experimental 1:52 scale model test of the VolturnUS system (shown in Fig. 1) conducted at the University of Maine's Alfond W2 Ocean Engineering Laboratory. Using data acquired from load cells installed at various locations in the hull the accuracy of the model is assessed through the use of power spectra and statistics. The performance of the structural model is considered over a range of environmental conditions representing design load cases prescribed by the American Bureau of Shipping for class certification of floating offshore wind turbines.

artificial intelligence, offshore projects plannin↗

Mutant xylan biosynthetic enzymes capable of dominant suppression of xylan biosynthesis

The present invention provides for a polypeptide capable of dominant suppression of a first naturally occurring IRX10, wherein the polypeptide comprises an amino acid sequence having at least 70% identity as compared to a second naturally occurring IRX10 wherein the polypeptide comprises one or more of the conserved amino acid indicated in FIG. 2 substituted with a different amino acid residue.

Brandon, Andrew↗

ANS Winter 2022: ATF-2C Physics Safety and Scoping Analysis

ATF-2C comprises four tiers with six rodlets each. The experiment test train (TT) is situated in Loop 2A in the center flux trap (CFT) of the ATR, in which typical pressurized water reactor (PWR) conditions shall be approximated. Tier 1 (bottom) of the TT tests Framatome silicon carbide (SiC) cladding, containing molybdenum heater rods. Low-enriched uranium (LEU) Framatome rodlets with chrome-coated M5 cladding have been modeled in their place for the physics safety analysis to allow the substitution of this tier with fuel if needed. Tier 2 tests LEU Framatome rodlets with M5 cladding, which had irradiated in ATR in prior ATF experiments. Tier 3 tests General Atomics SiC composite cladding, also containing molybdenum heater rods. Tier 4/5/6 (top) tests the Japan Atomic Energy Agency (JAEA)/Mitsubishi Heavy Industries (MHI) fueled rodlets. This upper tier tests LEU rodlets with chrome-coated MDA cladding—several with temperature or pressure instrumentation. To flatten the axial power profile, lower portion of Tier 4/5/6 is surrounded by a hafnium (Hf) shroud, and the bottom two UO2 pellets are of natural enrichment. The ATF-2C TT is to be irradiated in the CFT of ATR (Fig. 1) for three or four 60-day cycles.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Defect Characterization of Monocrystalline Silicon Solar Cells with Polysilicon Passivated Contact Using Electrically-Detected Magnetic Resonance (EDMR) Spectroscopy

As the c-Si based solar cell efficiencies are approaching over 26%, it is becoming critical to characterize the low concentrations of the defects – as low as 10^10-10^11 cm-3 (for e.g., iron contamination in high-lifetime Ga-doped wafers3 and n-type wafers), and further reduce them. Also, atomistic level understanding of the mechanisms of the low concentration process-induced-defects and reliability limiting defects (such as light and elevated temperature induced degradation, surface passivation degradation) is needed to design the mitigation strategies. The conventional characterization techniques are limited due to their detection limitations. Some of the techniques based on lifetime spectroscopies can still be used for low concentration characterization however, they are based on estimations and theoretical models and hence, indirect and cannot fully reveal information about the microscopic mechanism of the defects. Thus, we present the application of an ultrasensitive magnetic resonance-based technique for the direct spectroscopic detection of the defects in Si PV - electrically detected magnetic resonance (EDMR). In this work, we aim to focus on establishing a process flow for fabrication of minicells with (miniature replica of the larger-area cells) and setting up the routine for EDMR measurements on them with the EDMR instrumentation capability at NREL. For the EDMR measurements, sample size is limited by the dimensions of sample holder tube (width less than 3.2 mm, active area - 20 mm). Thus, we have designed c-Si based minicells with polysilicon (poly-Si) passivated contacts same as the larger-area cells that we fabricate in our group at NREL. We also modified our minicell process flow for fabricating the textured minicells for preserving the texture during processing and taking care of the laser-ablation edge damage which can significantly affect the performance of such small devices. We have achieved comparable performance on these newly fabricated minicells as that of our 4 cm2 devices with same structure (comparable VOC, JSC, FF). We also conducted EDMR measurements on the minicells and observed a distinct EDMR signal at g-value ~2.005 at temperatures 30K and above, as shown in Fig. 2. We associate this signal to the presence of silicon dangling bonds based on the g-value. We also observed an EDMR signal at g-value ~1.998 at temperature ~5K. The origin of this signal is still being investigated. Thus, we show the proof of concept of minicells and EDMR measurements with which we now aim to study some of the unknown defects in silicon solar cell devices.

EDMR↗

Approaches to mitigate the impact of dissolved organic matter on the adsorption of synthetic organic contaminants by porous carbonaceous sorbents

Adsorption of trichloroethylene (TCE) and atrazine, two synthetic organic contaminants (SOCs) having different optimum adsorption pore regions, by four activated carbons and an activated carbon fiber (ACF) was examined. Adsorbents included two coconut-shell based granular activated carbons (GACs), two coal-based GACs (F400 and HD4000) and a phenol formaldehyde-based activated carbon fiber. The selected adsorbents had a wide range of pore size distributions but similar surface acidity and hydrophobicity. Single solute and preloading (with a dissolved organic matter (DOM)) isotherms were performed. Single solute adsorption results showed that (i) the adsorbents having higher amounts of pores with sizes about the dimensions of the adsorbate molecules exhibited higher uptakes, (ii) there were some pore structure characteristics, which were not completely captured by pore size distribution analysis, that also affected the adsorption, and (iii) the BET surface area and total pore volume were not the primary factors controlling the adsorption of SOCs. The preloading isotherm results showed that for TCE adsorbing primarily in pores <10 {angstrom}, the highly microporous ACF and GACs, acting like molecular sieves, exhibited the highest uptakes. For atrazine with an optimum adsorption pore region of 10-20 {angstrom}, which overlaps with the adsorption region of some DOM components, the GACs with a broad pore size distribution and high pore volumes in the 10-20 {angstrom} region had the least impact of DOM on the adsorption. 25 refs., 3 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Coal keeps the home fires burning, at a price

The wild ride of 2007 thermal and coking coal and freight prices does not show any signs of abating as 2008 nears, leaving consumers coping with historic high costs, except in the US. 3 figs.

01 COAL, LIGNITE, AND PEAT↗

The credit impact of climate change

The energy industry is bracing for a carbon-constrained world, but the ways governments choose to control carbon around the globe may have vastly different impacts on company bottom lines. The article concludes that, ultimately, any system will be effective only when it makes emissions costly. Policymakers will have to sort out several issues, primarily those pertaining to cap and trade versus a carbon tax; allocations versus auctions of credits; acceptance of global offsets, and economy-wide versus sectoral approaches. The author believes the US eventually will adopt an approach that will attempt to avoid the spectacle of coal power plants making surplus profits from emissions allowance, as has happened in Europe, while also minimizing costs to the most affected units at the program onset. In theory, this should provide these units time to deploy the most optimal abatement measures. 1 ref., 3 figs.

20 FOSSIL-FUELED POWER PLANTS↗

Membrane separation advances in FE hydrogen program

Since its inception in Fiscal Year 2003 the US Office of Fossil Energy (FE) Hydrogen from Coal Program has sponsored more than 60 projects and made advances in the science of separating out pure hydrogen from syngas produced through coal gasification. The Program is focusing on advanced hydrogen separation technologies, which include membranes, and combining the WGS reaction and hydrogen separation in a single operation known as process intensification. The article explains the technologies and describes some key FE membrane projects. More details are available from http://www.fossil.energy.gov. 1 fig.

01 COAL, LIGNITE, AND PEAT↗

System studies guiding fossil energy RD & D

The article describes the following recently completed studies, all of which may be accessed on NETL's website: http://netl.doe.gov/energy-analyses/ref-shelf.html: Cost and performance baseline for fossil energy power plants - volume 1: bituminous coal and natural gas to electricity (May 2007); Increasing security and reducing carbon emissions of the US transportation sector: a transformational role for coal with biomass (August 2007); Industrial size gasification for syngas, substitute natural gas, and power production (April 2007); and Carbon dioxide capture from existing coal-fired power plants (December 2006). 2 figs.

01 COAL, LIGNITE, AND PEAT↗

WTA offers big efficiency gains

The next major step forward for brown coal fired power generation looks like being the RWE-developed fluidised bed based WTA process for precombustion drying of this high moisture fuel. WTA stands for Wirbelschicht-Trocknung mit interner Abwaermenutzung (fluidized bed drying with internal heat recovery). A large scale pilot plant is due to start operation early next year at Niederaussem K in Germany, while a WTA system is to be retrofitted to the Hazlewood plant in Australia. 1 ref., 7 figs.

01 COAL, LIGNITE, AND PEAT↗

Hazelwood 2030

Funding made available by both the Victoria State and Australian Federal Governments for the demonstration of low emission technologies is enabling the implementation of pilot brown coal drying technology at unit 1 of the International Power managed Hazelwood power station. This will dry the run of mine brown coal from above 60% moisture content to approximately 12% moisture content in an initial 50% feed train. It is the core component of a major upgrade programme, Hazelwood 2030 described in this article. Key features of the WTA and retrofit project can be summarised as follow: Unit 1: Installation of new turbines. Steam extraction for WTA supplying 23 kg/s. Unit output increased to between 215 and 217 MWe, with the same steam flow as the original design; Installation of boiler feed water heaters providing 3% improvement in unit boiler efficiency; Installation of a WTA fluidized bed drier sufficient to provide the fuel for 50% of the thermal heat input required for 50% cocombusiton of dried brown coal (DBC); Conversion of boiler and adaptation of the firing system to 50% co-combustion of dried brown coal and ROM brown coal; Implementation outage scheduled for 4Q, 2009; Unit 2: Installation of new turbines, unit output increased to 220 MWe, again with the same steam flow as the original design; Installation of boiler feed water heaters providing 5% improvement on unit boiler efficiency; Implementation outage scheduled for 2Q 2009. 11 figs.

01 COAL, LIGNITE, AND PEAT↗