Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Surprisingly selective sulfate extraction by a simple monofunctional di(imino)guanidinium micelle-forming anion receptor

Here, we report a novel di(imino)guanidinium anion extractant with unparalleled selectivity for sulfate in a liquid–liquid separation system. In addition to a 4.4 order-of-magnitude enhancement in affinity compared to a standard benchmark, our alkylated di(imino)guanidinium receptor is economically synthesized and features good compatibility with application-relevant aliphatic solvents. Small-angle X-ray scattering results reveal the formation of reverse-micelles, which together with the significant organic-phase water content challenge traditional notions of selectivity in extraction of superhydrophilic anions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cellulolytic enzyme-aided extraction of hemicellulose from switchgrass and its characteristics

The isolation of biomass components with their intact structure is integral for understanding the characteristics of biomass. Compared to other major biomass components such as cellulose and lignin, hemicellulose remains a challenging component to be isolated from the plant cell wall without significant depolymerization and modification. Here, a novel cellulolytic enzyme-aided hemicellulose (CEH) isolation method was developed to isolate hemicellulose with a near-native branched structure from switchgrass. The structural characteristics of CEH were investigated and compared with hemicelluloses isolated by conventional alkaline extracted hemicellulose (AEH) and DMSO extracted hemicellulose (DMSOH) methods. Gel permeation chromatography (GPC) analysis indicated that CEH had a weight-average molecular weight of 44 kDa, which was comparable to that of AEH (43 kDa) but higher than that of DMSOH (37 kDa). The chemical composition analysis revealed that CEH retained a higher proportion of glucuronic acid compared to AEH and DMSOH. The 2D 13 C– 1 H heteronuclear single quantum coherence (HSQC) NMR spectra containing the β-(1,4)-linked-D-xylan backbone, non-reducing-end peaks and both α- and β-reducing-end peaks in CEH were comparable to the spectra of the commercial beechwood xylan. CEH showed a highly branched hemicellulose structure, which retained methoxyl groups, O -acetyl groups, and 4- O -methyl-glucuronic acid attached to the xylan backbone.

59 BASIC BIOLOGICAL SCIENCES↗

Influence of uranyl complexation on the reaction kinetics of the dodecane radical cation with used nuclear fuel extraction ligands (TBP, DEHBA, and DEHiBA)

Specialized extractant ligands – such as tri-butyl phosphate (TBP), N,N-di-(2-ethylhexyl)butyramide (DEHBA), and N,N-di-2-ethylhexylisobutryamide (DEHiBA) – have been developed for the recovery of uranium from used nuclear fuel by reprocessing solvent extraction technologies. These ligands must function in the presence of an intense multi-component radiation field, and thus it is critical that their radiolytic behaviour be thoroughly evaluated. This is especially true for their metal complexes, where there is negligible information on the influence of complexation on radiolytic reactivity, despite the prevalence of metal complexes in used nuclear fuel reprocessing solvent systems. Here we present a kinetic investigation into the effect of uranyl (UO 2 2+ ) complexation on the reaction kinetics of the dodecane radical cation (RH˙ + ) with TBP, DEHBA, and DEHiBA. Complexation had negligible effect on the reaction of RH˙ + with TBP, for which a second-order rate coefficient (k) of (1.3 ± 0.1) × 10 10 M -1 s -1 was measured. For DEHBA and DEHiBA, UO 2 2+ complexation afforded an increase in their respective rate coefficients: k(RH˙ + + [UO 2 (NO 3 ) 2 (DEHBA) 2 ]) = (2.5 ± 0.1) × 10 10 M -1 s -1 and k(RH˙ + + [UO 2 (NO 3 ) 2 (DEHiBA) 2 ]) = (1.6 ± 0.1) × 10 10 M -1 s -1 . This enhancement with complexation is indicative of an alternative RH˙ + reaction pathway, which is more readily accessible for [UO 2 (NO 3 ) 2 (DEHBA) 2 ] as it exhibited a much larger kinetic enhancement than [UO 2 (NO 3 ) 2 (DEHiBA) 2 ], 2.6× vs. 1.4×, respectively. Complementary quantum mechanical calculations suggests that the difference in reaction kinetic enhancement between TBP and DEHBA/DEHiBA is attributed to a combination of reaction pathway (electron/hole transfer vs. proton transfer) energetics and electron density distribution, wherein attendant nitrate counter anions effectively ‘shield’ TBP from RH˙ + electron transfer processes.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Insights into the extraction of photogenerated holes from CdSe/CdS nanorods for oxidative organic catalysis

Using aerobic oxidative coupling of thiophenol in organic media as a model reaction, we show that photogenerated holes in CdSe/CdS core–shell nanorods can be efficiently extracted. As a result, CdSe/CdS nanorods can serve as an efficient visible-light photocatalyst at a very low concentration (~1.5 × 10 -4 mol%). We show that primary amines play an important role in the transformation of thiols into disulfides by forming a soluble thiolate in nonpolar solvent. Using time-resolved optical spectroscopy and electron paramagnetic resonance spectroscopy, we show that thiolate can efficiently extract the photogenerated holes from CdSe/CdS nanorods and transform into disulfide in organic solvent. Overall, our data indicate that there are two reaction pathways responsible for S–S coupling of thiolate upon illumination of CdSe/CdS nanorods. We demonstrate that instead of scavenging of photogenerated holes by sacrificial species for prevention of photo corrosion of CdSe/CdS nanorods, the photogenerated holes can be efficiently used for oxidative organic synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactions of the ˙NO 3 radical with nuclear extraction ligands in alkane solution

Here, the reactivity of the nitrate radical (NO 3 ˙) with organophosphorus and amidic actinide and lanthanide complexing agents of interest to nuclear solvent extraction applications was measured, resulting in the first-ever reported bimolecular rate constants for this radicals’ reactions in dodecane solution. The order of reactivity for neutral organophosphorus compounds showed faster rate constants with increasing electron density on the phosphoryl phosphorus atom, indicating an increasing facility for electron abstraction reactions occurring in addition to H-atom abstraction from the ligand alkane chains. The only acidic organophosphorus compound investigated, HEH[EHP], showed low reactivity with the NO 3 ˙ radical, attributed to its dimerization in this non-polar solvent. Amide ligand reaction rates were faster than for organophosphorus molecules, suggesting more facile H-atom abstraction from carbonyl activated methylene and amyl groups. While all rate constants were slower than the diffusion-limited rate they were still rapid enough to result in significant oxidation of solvent extraction ligands in dodecane solution.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Automatic Lane-Level Road Network Extraction from Aerial Imagery for Transportation Digital Twins

Accurate road networks are essential for credible traffic microsimulation and transportation digital twins, yet high-definition maps are often difficult to obtain due to limited availability, high cost, or proprietary restrictions. Some build networks from crowdsourced data, such as OpenStreetMap, but these sources often contain geometric and semantic inconsistencies. Others create networks manually, a process that is labor-intensive and difficult to scale. To address these limitations, this work presents an end-to-end pipeline that automatically extracts georeferenced, lane-level road networks from publicly available high-resolution satellite imagery and converts them into simulation-ready assets. The developed end-to-end pipeline has three primary modules: (1) A computer-vision-based module first detects directed lane geometries and intersection layouts. (2) A heuristic-based topology construction module then identifies approach and exit legs and establishes conflict-free lane-to-lane connections. (3) Finally, an automatic simulation-building module converts the extracted network into standard formats, e.g., OpenDRIVE, and generates routable SUMO networks. The framework supports both complete network construction from scratch and local-scale refinement of existing networks through lane-count correction, transition recovery, and geometric regularization. The proposed pipeline provides a practical pathway to generate traffic simulation networks from satellite imagery, significantly reducing manual reconstruction effort and enabling scalable, continuously updated transportation digital twins.

Guo, Hetian [University of Georgia, Athens] (ORCID↗

Diagnostics of a He{sup +} beam extracted from a compact magnetic bucket-type ion source

Performance of a compact He{sup +} ion source was investigated before installing it to the experiment system developed for studying the efficiency of autodetachment neutralization from He{sup -} to He{sup 0}. Dependence of the extracted ion current upon the plasma parameters and that upon the extraction voltage indicated that the source performance was limited by space charge effect. The beam emittance was measured with a multislit system for various operation conditions. The experimentally determined emittance agreed well with the emittance obtained from ion trajectories calculated with input plasma parameters measured by a Langmuir probe. The beam current density of 60 mA/cm{sup 2} and the emittance of less than 25{pi} mm mrad are expected to deliver enough current to the downstream of the He{sup -} neutralizer system to clarify factors affecting the final He{sup 0} intensity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Prospects of ion beam extraction and transport simulations (invited)

Beam profile measurements using viewing targets and emittance measurements with pepper pot devices have established new insights about the ion beam extracted from an electron cyclotron resonance ion source (ECRIS). In our measurements we have compared two different ECRISs of CAPRICE type, one source was equipped with a standard 1.0 T hexapole magnet, whereas for the other ion source a stronger hexapole magnet with a flux density of 1.2 T has been installed. The resulting ion beam profile for each individual charge state produced by different focal strengths of an optical element can be used to estimate the emittance, but it also shows the negative influence of the hexapole on the extracted ion beam. A hexapole correction would be desirable to improve further beam transport. A possible correction scheme will be discussed. All experimental observations can be reproduced by computer simulation if a magnetic plasma is assumed. When the Larmor radius for ions becomes small, collisions are negligible for the path of ions within the plasma. Low energy electrons are highly movable along the magnetic field lines and can compensate the ion space charge within the plasma chamber.

43 PARTICLE ACCELERATORS↗

COMPARISON OF SELECTED WELD DEFECT EXTRACTION METHODS

This paper presents three different methods of welding defects detection from radiographs. First two methods are dedicated for extraction of flaws directly from radiograms. Fuzzy logic system considers whether the pixel belongs to crack (or background) using defects probability maps together with simple fuzzy rules. Neural network method uses knowledge gathered from radiographs with known defects. Indirect method extracts defects by subtracting background from the radiograph and next using various local thresholding methods.

36 MATERIALS SCIENCE↗

Singular value decomposition filtering for enhanced signal extraction from two-dimensional beam emission spectroscopy measurements

The signal-to-noise ratio (SNR) of extracted turbulence features from beam emission spectroscopy (BES) data is significantly enhanced via application of singular value decomposition (SVD) methods. BES measures two-dimensional localized density fluctuations in DIII-D. The SNR of core turbulence characteristics is typically limited by noise arising from electronic noise, photon noise, and fluctuations in the observed neutral beam. SVD filtering has led to a significant enhancement in the SNR, reducing errors in time-resolved measurements of core turbulence characteristics, including correlation lengths, decorrelation rates, and group velocities. The SVD filtration technique is applied to BES data by combining multiple physically adjacent sampling locations to extract spatially correlated signals while partially removing unwanted incoherent noise. Using approximately half of the singular value weighted modes to reconstruct turbulence signals is found to improve SNR by up to a factor of 4, while maintaining the spatial structure of the turbulence. Unique aspects of application of SVD to broadband turbulence data are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Increase of Boron Ion Beam Current Extracted from a Multi-Cusp Ion Source in an Ion Doping System with Mass Separation

A multi-cusp ion source with large area extraction area has a capacity to extract high current ion beams. However it is difficult to obtain high current boron ion beams from boron trifluoride plasma as input power density is low and BF{sub 2}{sup +} is a main ion species. It was found that fluoride ion currents were selectively decreased by applying positive potential to a plasma electrode with respect to a plasma chamber. Using this method to a multi-cusp ion source with adequate magnet configuration, high current boron ion beams of 500 {mu}A/cm were obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Broad Ion Beam Extraction from Large Bore ECR Ion Source with Cylindrically Comb-Shaped Magnetic Fields Configuration by Feeding Simultaneously 11 to 13 GHz and 2.45 GHz Microwaves

We tried to enlarge the operation window of an electron cyclotron resonance (ECR) ion source for producing the ECR plasma confined by cylindrically comb-shaped magnetic field, and for extracting the broad ion beam under the low pressures and low microwave powers. The magnetic field by permanent magnets constructs ECR zones at different positions for 2.45 GHz and 11 to 13 GHz microwaves, respectively. According to probe measurements, profiles of plasma density and temperature are different for using each single microwave. We conduct production of ECR plasma by launching simultaneously these two frequency microwaves, and obtain flat profiles of the electron density and the electron temperature. These profiles are not achieved by feeding single frequency microwave. It is found that plasma can be controllable on spatial profiles beyond wide operation window of plasma parameters. We conducted preliminary extracting and forming large bore ion beam from this source. We will make this source a part of tandem type ion source for the first stage. We investigated feasibility and hope to realize the device which has wide range operation window in a single device to produce many kinds of ion beams as like to universal source based on ECR ion source.

43 PARTICLE ACCELERATORS↗

Aperture Size Effect on Extracted Negative Ion Current Density

This paper discusses experimental results obtained at the 1 MV testbed at CEA Cadarache that appear to show a higher extracted D{sup -} current density from small apertures. Plasma grids with different shapes have been installed and tested. All grids had one single aperture. The tests were done in volume operation and in caesium operation. We tested four grids, two with Oe14 mm, one with Oe11 mm and one with Oe8 mm apertures. No aperture size effect was observed in volume operation. In caesiated operation the extracted current density for the Oe8 mm aperture appears to be significantly higher ({approx}50%) than for the Oe14 mm aperture. Simulations with a 3D Monte Carlo Trajectory Following Code have shown an aperture size effect of about 20%. Finally, as byproducts of the experiments, data on backstreaming positive ions and the temperature of the plasma grid have been obtained.

43 PARTICLE ACCELERATORS↗

Design of a low voltage, high current extraction system for the ITER Ion Source

A Test Facility is planned to be built in Padova to assemble and test the Neutral Beam Injector for ITER. In the same Test Facility the Ion Source will be tested in a dedicated facility planned to operate in parallel to the main 1 MV facility. Purpose of the full size Ion Source is to optimize the Ion Source performance by maximizing the extracted negative ion current density and its spatial uniformity and by minimizing the ratio of co-extracted electrons. In this contribution the design of the extractor and accelerator grids for a 100 kV, 60 A system is presented. The trajectories of the negative ions, calculated with the SLACCAD code [1], have been benchmarked by a new 2D code (BYPO [2]) which solves in a self consistent way the electric fields in presence of electric charge and magnetic fields. The energy flux intercepted by the grids is estimated by using the Montecarlo code EAMCC [3] and the grids designed according to the constraints set by the permanent magnets and by the cooling channels. The interaction of backstreaming ions due to the ionization process with the grids and the Ion Source backplate is investigated and its impact on the project and performance discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Broad, intense, quiescent beam of singly charged metal ions obtained by extraction from self-sputtering plasma far above the runaway threshold

Dense metal plasmas obtained by self-sputtering far above the runway threshold are well suited to generate intense quiescent ion beams. The dilemma of high current density and charge state purity can be solved when using target materials of low surface binding energy by utilizing non-resonant exchange reactions before ion extraction. Space-charge-limited quiescent beams of Cu+, Zn+, and Bi+ with ~;;10 mA/cm2 have been obtained through multi-aperture gridded ion extraction up to 45 kV from self-sputtering plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma potential and energy spread determination using ion beams extracted from an electron cyclotron resonance source

We have obtained estimates of plasma potentials and energy spreads characterizing an electron cyclotron resonance ion source plasma under different source conditions. Our estimates are obtained from analysis of ion beams extracted from the ion source at 10 kV that are subsequently decelerated into a floating surface scattering chamber where their current intensity incident on a solid sample is measured as function of retardation voltage. The deceleration occurs outside the measurement chamber, permitting beam current measurements in a field-free region. Absence of grids in the deceleration section avoids potential issues of field penetration. The behavior of our deceleration optics was modeled with SIMION. The simulation indicated a linear beam attenuation dependence close to full retardation where the beam current goes to zero. Deviations from this linear dependence observed close to zero beam energy give information on the initial energy spread of the ions extracted from the source. Our decelerated beams measurements are compared with recent in situ probe results and external beams results based on magnetic analysis.

43 PARTICLE ACCELERATORS↗

Plasma Sputter-type Ion Source with Wire Electrodes for Low-energy Gallium Ion Extraction

Low-energy ions of gallium (Ga) and argon (Ar) were extracted from a plasma sputter-type ion source system that utilized a tungsten (W) wire extractor geometry. The 90% transparent W wire extractor configuration had shown that the system was capable of producing an ion beam with the energy as low as 10 eV in a dc filament discharge and 50 eV in a radio frequency (rf) excited system. In the present investigation, Ar plasma was sustained in an ion source chamber through an inductively coupled 13.56 MHz rf power source. Negatively biased liquid Ga target suspended on a W reservoir was sputtered and postionized prior to extraction. Mass spectral analyses revealed a strong dependence of the Ga{sup +} current on the induced target bias.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗