Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Event capturing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Understanding Uncertainties in Tropical Cyclone Rainfall Hazard Modeling Using Synthetic Storms

Tropical cyclone (TC) rainfall hazard assessment is subject to the bias in TC climatology estimation from climate simulations or synthetic downscaling. In this study, we investigate the uncertainty in TC rainfall hazard assessment induced by this bias using both rain gauge and radar observations and synthetic-storm-model-coupled TC rainfall simulations. We identify the storm’s maximum intensity, impact duration, and minimal distance to the site to be the three most important storm parameters for TC rainfall hazard, and the relationship between the important storm parameters and TC rainfall can be well captured by a physics-based TC rainfall model. The uncertainty in the synthetic rainfall hazard induced by the bias in TC climatology can be largely explained by the bias in the important storm parameters simulated by the synthetic storm model. Correcting the distribution of the most biased parameter may significantly improve rainfall hazard estimation. Bias correction based on the joint distribution of the important parameters may render more accurate rainfall hazard estimations; however, the general technical difficulties in resampling from high-dimensional joint probability distributions prevent more accurate estimations in some cases. The results of the study also support future investigation of the impact of climate change on TC rainfall hazards through the lens of future changes in the identified important storm parameters.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Turbulence-Resolving Simulations of Hurricane Laura (2020): Insights Into Extreme Winds and Eyewall Turbulence

Extreme weather events pose significant risks to coastal and offshore energy infrastructure. In this work, we investigate the structure of mean winds and turbulence near the surface ( z < 300 m) that occurred during Hurricane Laura in 2020 on the US Gulf Coast. To this end, we perform turbulence-resolving simulations (..delta..x = 33.33 m) that encompass the entire eyewall of Hurricane Laura by introducing a novel method that we will refer to as Moving-Mesoscale to Static-LES Integrated Coupling (MOSAIC). The simulation results are validated against surface, boundary-layer, and mid-tropospheric observations. Our analysis of the extreme wind conditions near the surface indicates that the mean wind and turbulence profiles vary greatly at and near the eyewall, resulting in extreme values of mean wind speed (U > 50 m * s-1) and turbulence kinetic energy (k ~ 50 m2 * s-2) at altitudes above 50 m . To investigate in detail the nature of turbulence within the eyewall of the storm, we conduct higher-resolution simulations (..delta..x = 11.11 m) of a portion of the hurricane. We provide a comprehensive statistical description of turbulence in the eyewall region, highlighting the need to employ ..delta..x ~ 10 m grid spacing to capture the integral length-scales near the surface, second- and higher-order central moments (i.e., skewness and kurtosis), and spectral coherence in the flow accurately. These numerical simulations provide the most detailed description of mean winds and turbulent conditions within the eyewall of a historical tropical cyclone to date, illustrating how high-resolution simulations can enhance limited turbulence measurements in hurricanes and giving insight into the extreme conditions threatening offshore and coastal infrastructure.

17 WIND ENERGY↗
NASA NTRS2019

Human Performance Contributions to Safety in Commercial Aviation

Every day in aviation, pilots, air traffic controllers, and other front-line personnel perform countless correct judgments and actions in a variety of operational environments. These judgments and actions are often the difference between an accident and a non-event. Ironically, data on these behaviors are rarely collected or analyzed. Data-driven decisions about safety management and design of safety-critical systems are limited by the available data, which influence how decision makers characterize problems and identify solutions. Large volumes of data are collected on the failures and errors that result in infrequent incidents and accidents, but in the absence of data on behaviors that result in routine successful outcomes, safety management and system design decisions are based on a small sample of nonrepresentative safety data. This assessment aimed to find and document “safety successes” made possible by human operators. With many Aeronautics Research Mission Directorate (ARMD) Programs and Projects focusing on increased automation and autonomy and decreased human involvement, failure to fully consider the human contributions to successful system performance in civil aviation represents a significant risk — a risk that has not been recognized to date. Without understanding how humans contribute to safety, any estimate of predicted safety of autonomous capabilities is incomplete and inherently suspect. Furthermore, understanding the ways in which humans contribute to safety can promote strategic interactions among safety technologies, functions, procedures and the people using them. Without this understanding, the full benefits of an integrated, optimized human/technology or autonomous system will not be realized. Historically, safety has been consistently defined in terms of the occurrence of accidents or recognized risks (i.e., in terms of things that go wrong). These adverse outcomes are explained by identifying their causes, and safety is restored by eliminating or mitigating these causes. An alternative to this approach is to focus on what goes right and identify how to replicate that process. Focusing on the rare cases of failures attributed to “human error” provides little information about why human performance routinely prevents adverse events. Hollnagel has proposed that things go right because people continuously adjust their work to match their operating conditions. These adjustments become increasingly important as systems continue to grow in complexity. Thus, the definition of safety should reflect not only “avoiding things that go wrong” but “ensuring that things go right.” The basis for safety management requires developing an understanding of everyday activities. However, few mechanisms to monitor everyday work exist in the aviation domain, which limits opportunities to learn how designs function in reality. This concept of safety thinking and safety management is reflected in the emerging field of resilience engineering. According to Hollnagel, a system is resilient if it can sustain required operations under expected and unexpected conditions by adjusting its functioning prior to, during, or following changes, disturbances, and opportunities. To explore “positive” behaviors that contribute to resilient performance in commercial aviation, the assessment team examined a range of existing sources of data about pilot and air traffic control (ATC) tower controller performance, including subjective interviews with domain experts and objective aircraft flight data records. These data were used to identify strategies that support resilient performance, methods for exploring and refining those strategies in existing data, and proposed methods for capturing and analyzing new data.

Null, Cynthia H.↗
NASA NTRS2020

Ellicott City Disasters II: Enhancing a Statistical Flood Risk Model to Continue Improving Early Warning Systems and Public Safety in Ellicott City, Maryland

As flooding events in the United States grow in frequency and intensity, the use of technological advancements and applied science are increasingly necessary for effective flood monitoring and warning systems. The NASA DEVELOP Ellicott City Disasters II project investigated the use of machine learning for applications in flood risk detection to support the improvement of early warning systems. To strengthen the efforts of the Howard County Office of Emergency Management (OEM) in building a more robust flood monitoring system, the project improved the original statistical flood risk model, FLuME (Flood Learning Model Environment), programmed by the first DEVELOP term. The enhancements incorporated an additional six years of precipitation and soil moisture data from the North American Land Data Assimilation System (NLDAS), modeled using Aqua Advanced Microwave Scanning Radiometer for EOS and Tropical Rainfall Measuring Mission (TRMM) Microwave Imager. These Earth observations were supplemented by stream gauge data from the OEM and the US Geological Survey. The resultant flood risk model FLASH (Flood Learning Environment and Severity Assessment Hub) was trained to evaluate input variables and predict stage height in Ellicott City in real time. The addition of an advanced deep learning framework known as long short-term memory improved the model’s ability to capture relationships between variables. To assess the effectiveness of the new model, FLASH produced a model efficiency metric of 0.99, a significant improvement over the 0.85 value produced by the previous model. The project assisted the OEM in pursuing the integration of open data and NASA Earth observations into a threat matrix capable of informing near real-time decision making.

Disasters↗
NASA NTRS2020

Ellicott City Disasters II: Enhancing a Statistical Flood Risk Model to Continue Improving Early Warning Systems and Public Safety in Ellicott City, Maryland

As flooding events in the United States grow in frequency and intensity, the use of technological advancements and applied science are increasingly necessary for effective flood monitoring and warning systems. The NASA DEVELOP Ellicott City Disasters II project investigated the use of machine learning for applications in flood risk detection to support the improvement of early warning systems. To strengthen the efforts of the Howard County Office of Emergency Management (OEM) in building a more robust flood monitoring system, the project improved the original statistical flood risk model, FLuME (Flood Learning Model Environment), programmed by the first DEVELOP term The enhancements incorporated an additional six years of precipitation and soil moisture data from the North American Land Data Assimilation System (NLDAS), modeled using Aqua Advanced Microwave Scanning Radiometer for EOS and Tropical Rainfall Measuring Mission TRMM Microwave Imager. These Earth observations were supplemented by stream gauge data from the OEM and the US Geological Survey. The resultant flood risk model FLASH (Flood Learning Environment and Severity Assessment Hub) was trained to evaluate input variables and predict stage height in Ellicott City in real time. The addition of an advanced deep learning framework known as long short-term memory improved the model’s ability to capture relationships between variables. To assess the effectiveness of the new model, FLASH produced a model efficiency metric of 0.99, a significant improvement over the 0.85 value produced by the previous model. The project assisted the OEM in pursuing the integration of open data and NASA Earth observations into a threat matrix capable of informing near real-time decision making.

Disasters↗
DOE OSTI2023

Proactive Intrusion Detection and Mitigation System

SAND2023-05661O The proactive intrusion detection and mitigation system (PIDMS) provides grid-edge situational awareness for cybersecurity defense by capturing real-time distributed energy resource (DER) network traffic and performance data with a novel approach that improves the detection and prevention of cyber-physical attacks. The PIDMS addresses the grid-edge security gap with real-time analysis of both network traffic and photovoltaic performance data to deliver a novel, cyber-physical intrusion detection system (IDS) approach that increases the accuracy and effectiveness of detection and mitigation. This hybrid IDS analysis enables dual monitoring that increases the workload of the adversary; both cyber and physical data would have to be simultaneously spoofed to evade detection. Furthermore, monitoring and analyzing cyber data are insufficient in some cases. For example, in an insider threat aimed at disrupting inverter grid-support functions where proper credentials and authentication are achieved, only the altered PV performance would indicate abnormal behavior. All in all, the PIDMS provides novel capabilities for: • Distributed, real-time cyber-physical detection and mitigation analysis • Cybersecurity defense for grid-edge systems • Analysis framework that can provide situational awareness across the transmission, distribution, and DER systems The PIDMS sensor is designed to collect cyber-physical data, process the data using machine-learning algorithms, detect abnormal events, and deploy mitigations. With these goals, the main functional PIDMS objectives are: • Capability to collect cyber-physical data • Onboard storage of cyber-physical data • Peer-to-peer communication • Computationally efficient machine-learning algorithms • Online cyber-physical data analysis • Alerting/visualization capabilities • Mitigation deployment capability with bump-in-the-wire (BITW) implementation Each of these functional objectives enable PIDMS to perform effective cyber-physical intrusion detection and mitigation. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Jones, Christian↗
DOE OSTI2021

The Circular Economy Lifecycle Assessment and Visualization Framework: A Case Study of Wind Blade Circularity in Texas

Moving the current linear economy toward circularity is expected to have environmental, economic, and social impacts. Various modeling methods, including economic input-output modeling, life cycle assessment, agent-based modeling, and system dynamics, have been used to examine circular supply chains and analyze their impacts. This work describes the newly developed Circular Economy Lifecycle Assessment and Visualization (CELAVI) framework, which is designed to model how the impacts of supply chains might change as circularity increases. We first establish the framework with a discussion of modeling capabilities that are needed to capture circularity transitions; these capabilities are based on the fact that supply chains moving toward circularity are dynamic and therefore not at steady state, may encompass multiple industrial sectors or other interdependent supply chains and occupy a large spatial area. To demonstrate the capabilities of CELAVI, we present a case study on end-of-life wind turbine blades in the U.S. state of Texas. Our findings show that depending on exact process costs and transportation distances, mechanical recycling could lead to 69% or more of end-of-life turbine blade mass being kept in circulation rather than being landfilled, with only a 7.1% increase in global warming potential over the linear supply chain. We discuss next steps for framework development.

17 WIND ENERGY↗
NASA NTRS2023

Probabilistic Forecasting of Ground Magnetic Perturbation Spikes at Mid-Latitude Stations

The prediction of large fluctuations in the ground magnetic field (dB/dt) is essential for preventing damage from Geomagnetically Induced Currents. Directly forecasting these fluctuations has proven difficult, but accurately determining the risk of extreme events can allow for the worst of the damage to be prevented. Here we trained Convolutional Neural Network models for eight mid-latitude magnetometers to predict the probability that dB/dt will exceed the 99th percentile threshold 30–60 min in the future. Two model frameworks were compared, a model trained using solar wind data from the Advanced Composition Explorer (ACE) satellite, and another model trained on both ACE and SuperMAG ground magnetometer data. The models were compared to examine if the addition of current ground magnetometer data significantly improved the forecasts of dB/dt in the future prediction window. A bootstrapping method was employed using a random split of the training and validation data to provide a measure of uncertainty in model predictions. The models were evaluated on the ground truth data during eight geomagnetic storms and a suite of evaluation metrics are presented. The models were also compared to a persistence model to ensure that the model using both datasets did not over-rely on dB/dt values in making its predictions. Overall, we find that the models using both the solar wind and ground magnetometer data had better metric scores than the solar wind only and persistence models, and was able to capture more spatially localized variations in the dB/dt threshold crossings.

Michael Coughlan↗
DOE OSTI2020

Fish scale-loss caused by simulated hydraulic shear stress

Riverine fishes found within streams impacted by hydropower also often pass through hydropower turbines during annual downstream migrations. During turbine passage events, fish may experience a suite of stressors including rapid pressure changes, impacts from turbine blades, and exposure to hydraulic shear. Scale-loss is often observed in fish collected below dams and hydraulic shear is the most likely cause of this trauma. While exposure to shear may cause other injuries, scale-loss appears to be the most common non-lethal injury observed to date. We sought to quantify how hydraulic shear may cause scale-loss in rainbow trout, gizzard shad, and hybrid striped bass by precisely controlling the exposure level (velocity) and duration (seconds) of a water jet. We targeted the same area for all three species found between the operculum and dorsal fin on the left, lateral surface. Exposure velocities ranged from 0 (controls) to 11.0 meters/second but fish were only exposed to the water jet for 1.5 seconds. A 0.2 milligram/milliliter solution of fluorescein was used to stain the areas of scale-loss by submerging each fish in this solution for at least 6 minutes. Fluorescein was used because it interacts with epithelial tissue that has been damaged and it fluoresces under ultraviolet lighting. Fish were photographed under short- and longwave ultraviolet lighting in a dark chamber to capture fluorescence. Fish photographs were analyzed using ImageJ and the proportion of descaled area was estimated for each fish within a 35 by 35-millimeter square. In general, these data highlight how exposure to hydraulic shear may lead to significant levels of descaling in riverine fishes.

13 HYDRO ENERGY↗
NASA NTRS2001

Monthly Variability in Upper Ocean Biogeochemistry due to Mesoscale Eddy Activity in the Sargasso Sea

A comparison of monthly biogeochemical measurements made from 1993 to 1995, combined with hydrography and satellite altimetry, was used to observe the impacts of nine eddy events on primary productivity and particle flux in the Sargasso Sea. Measurements of primary production, thorium-234 flux, nitrate+nitrite, and photosynthetic pigments made at the US JGOFS Bermuda Atlantic Time-series Study (BATS) site were used. During the three years of this study, four out of six high thorium-234 flux events over 1000 dpm/sq m/d occurred during the passage of an eddy. Primary production nearly as high as the spring bloom maximum was observed in two modewater eddies (May 1993 and July 1995). The 1994 spring bloom at BATS was suppressed by the passage of an anticyclone. Distinct phytoplankton community shifts were observed in mode-water eddies, which had an increased percentage diatoms and dinoflagelletes, and in cyclones, which had an increased percentage cyanobacteria (excluding Prochlorococcus). The difference in the observations of mode-water eddies and cyclones may result from the age of the eddy, which was very important to the biological response. In general, eddies that were one to two months old elicited a large biological response; eddies that were three months old may show a biological response and were accompanied by high thorium flux measurements, eddies that were four months old or older did not show a biological response or high thorium flux. Our conceptual model depicting the importance of temporal changes during eddy upwelling and decay fit the observations well in all 7 upwelling eddies. Additional information is needed to determine the importance of deeper mixed layers and winter mixing to the magnitude of the eddy impacts. Also, sampling generally captured only the beginning, end, and /or edge of an eddy due to the monthly to semi-monthly frequency of the measurements made at BATS. Lagrangian studies, higher resolution time-series, and/or more spatial coverage is needed to provide additional information for improved C and N budgets in the Sargasso Sea and to complete our understanding of the temporal changes that occur in an eddy.

Sweeney, Erin N.↗
NASA NTRS2004

High Resolution Digital Elevation Models of Pristine Explosion Craters

In order to effectively capture a realistic terrain applicable to studies of cratering processes and landing hazards on Mars, we have obtained high resolution digital elevation models of several pristine explosion craters at the Nevada Test Site. We used the Airborne Terrain Mapper (ATM), operated by NASA's Wallops Flight Facility to obtain DEMs with 1 m spacing and 10 cm vertical errors of 4 main craters and many other craters and collapse pits. The main craters that were mapped are Sedan, Scooter, Schooner, and Danny Boy. The 370 m diameter Sedan crater, located on Yucca Flat, is the largest and freshest explosion crater on Earth that was formed under conditions similar to hypervelocity impact cratering. As such, it is effectively pristine, having been formed in 1962 as a result of a controlled detonation of a 100 kiloton thermonuclear device, buried at the appropriate equivalent depth of burst required to make a simple crater. Sedan was formed in alluvium of mixed lithology and subsequently studied using a variety of field-based methods. Nearby secondary craters were also formed at the time and were also mapped by ATM. Adjacent to Sedan and also in alluvium is Scooter, about 90 m in diameter and formed by a high-explosive event. Schooner (240 m) and Danny Boy (80 m) craters were also important targets for ATM as they were excavated in hard basalt and therefore have much rougher ejecta. This will allow study of ejecta patterns in hard rock as well as engineering tests of crater and rock avoidance and rover trafficability. In addition to the high resolution DEMs, crater geometric characteristics, RMS roughness maps, and other higher-order derived data products will be generated using these data. These will provide constraints for models of landing hazards on Mars and for rover trafficability. Other planned studies will include ejecta size-frequency distribution at the resolution of the DEM and at finer resolution through air photography and field measurements, correlation of ejecta size and composition with radar and visible-thermal IR remote sensing signatures, and comparison of these results with similar measurements of Mars. The final DEMs, ancillary data sets, and derived data products will be made available to the community.

T G Farr↗
NASA NTRS2001

Monthly Variability in Upper Ocean Biogeochemistry Due to Mesoscale Eddy Activity in the Sargasso Sea

A comparison of monthly biogeochemical measurements made from 1993 to 1995, combined with hydrography and satellite altimetry, was used to observe the impacts of nine eddy events on primary productivity and particle flux in the Sargasso Sea. Measurements of primary production, thorium-234 flux, nitrate+nitrite, and photosynthetic pigments made at the US JGOFS Bermuda Atlantic Time-Series Study (BATS) site were used. During the three years of this study, four out of six high thorium-234 flux events over 1000 dpm/sq m/d occurred during the passage of an eddy. Primary production nearly as high as the spring bloom maximum was observed in two mode-water eddies (May 1993 and July 1995). The 1994 spring bloom at BATS was suppressed by the passage of an anticyclone. Distinct phytoplankton community shifts were observed in mode-water eddies, which had an increased percentage diatoms and dinoflagelletes, and in cyclones, which had an increased percentage cyanobacteria (excluding Prochlorococcus). The difference in the observations of mode-water eddies and cyclones may result from the age of the eddy, which was very important to the biological response. In general, eddies that were one to two months old elicited a large biological response; eddies that were three months old may show a biological response and were accompanied by high thorium flux measurements; eddies that were four months old or older did not show a biological response or high thorium flux. Our conceptual model depicting the importance of temporal changes during eddy upwelling and decay fit the observations well in all seven upwelling eddies. Additional information is needed to determine the importance of deeper mixed layers and winter mixing to the magnitude of the eddy impacts. Also, sampling generally captured only the beginning, end, and/or edge of an eddy due to the monthly to semi-monthly frequency of the measurements made at BATS. Lagrangian studies, higher resolution time-series, and/or more spatial coverage is needed to provide additional information for improved C and N budgets in the Sargasso Sea and to complete our understanding of the temporal changes that occur in an eddy.

Sweeney, Erin N.↗
DOE OSTI2022

FY22 Status Report on the ART-GCR CMVB and CNWG International Collaborations

This work presents the numerical model for the high temperature test reactor (HTTR) loss of forced cooling (LOFC) experiment with the INL codes Griffin, BISON, and RELAP-7, based on the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework. Promising results were obtained, with the overall behavior of the reactor successfully captured. Changes in the heat transfer coupling, as compared to the fiscal year (FY)-21 model, enabled drastic improvement of the steady-state solution, both in terms of computational time and global energy discrepancies. The former was reduced by a factor of roughly 60, whereas the latter decreased from 11% to less than 2%. Furthermore, the discrepancy in the steady-state multiplication factor was improved from +2,300 and +2,900 pcm (for the 30 and 9 MW cases) to -700 and +1,200 pcm, respectively, and now falls well within the large measurement uncertainties stemming from graphite impurities. Validation of the Monte Carlo model used to generate cross sections was also performed against available measurements. Though significant, the discrepancies remain acceptable overall in light of the large uncertainty. Numerous improvements are still needed to better compare with the experiment involving the 9 MW case and to instill greater confidence in the model’s ability to accurately predict the 30 MW behavior. Specifically, the power levels predicted by the 9 MW transient simulation following re-criticality remain low, pointing to an underestimation of the passive cooling of the core. A key aspect of future work will be to better understand the flow pattern during the LOFC event, particularly to determine if natural or forced convection is occurring inside the reactor pressure vessel (RPV). More generally, additional validation data would be immensely useful for further enhancing the numerical model and better matching the experiments. In addition, a more sophisticated thermal-hydraulics model that simulates all the channels as a single system model should be considered to take into account the rest of the primary loop. Finally, even if the results are in better agreement with the experiments, sensitivity analysis and uncertainty quantification will be necessary to evaluate the model uncertainty.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS2012

U.S. Spacesuit Knowledge Capture Series Catalog

The National Aeronautics and Space Administration (NASA) and other organizations have been performing U.S. Spacesuit Knowledge Capture (USSKC) since the beginning of space exploration through published reports, conference presentations, specialized seminars, and classes instructed by veterans in the field. The close physical interaction between spacesuit systems and human beings makes them among the most personally evocative pieces of space hardware. Consequently, spacesuit systems have required nearly constant engineering refinements to do their jobs without impinging on human activity. Since 2008, spacesuit knowledge capture has occurred through video recording, engaging both current and former specialists presenting technical scope specifically to educate individuals and preserve knowledge. These archives of spacesuit legacy reflect its rich history and will provide knowledge that will enhance the chances for the success of future and more ambitious spacesuit system programs. The scope and topics of USSKC have included lessons learned in spacesuit technology; experience from the Gemini, Apollo, Skylab, and Shuttle Programs; the process of hardware certification, design, development, and other program components; spacesuit evolution and experience; failure analysis and resolution; and aspects of program management. USSKC activities have progressed to a level where NASA, the National Air and Space Museum (NASM), Hamilton Sundstrand (HS) and the spacesuit community are now working together to provide a comprehensive way to organize and archive intra-agency information related to the development of spacesuit systems. These video recordings are currently being reviewed for public release using NASA export control processes. After a decision is made for either public or non-public release (internal NASA only), the videos and presentations will be available through the NASA Johnson Space Center Engineering Directorate (EA) Engineering Academy, the NASA Technical Reports Server (NTRS), the NASA Aeronautics & Space Database (NA&SD), or NASA YouTube. Event availability is duly noted in this catalog.

Bitterly, Rose↗
NASA NTRS1997

Archiving of Wideband Plasma Wave Data

Beginning with the third year of funding, we began a more ambitious archiving production effort, minimizing work on new software and concentrating on building representative archives of the missions mentioned above, recognizing that only a small percentage of the data from any one mission can be archived with reasonable effort. We concentrated on data from Dynamics Explorer and ISEE 1, archiving orbits or significant fractions of orbits which attempt to capture the essence of the mission and provide data which will hopefully be sufficient for ongoing and new research as well as to provide a reference to upcoming and current ISTP missions which will not fly in the same regions of space as the older missions and which will not have continuous wideband data. We archived approximately 181 Gigabytes of data, accounting for some 1582 hours of data. Included in these data are all of the AMPTE chemical releases, all of the Spacelab 2/PDP data obtained during the free-flight portion of its mission, as well as significant portions of the S3, DE-1, Imp-6, Hawkeye, Injun 5, and ISEE 1 and 2 data sets. Table 1 summarizes these data. All of the data archived are summarized in gif-formatted images of frequency-time spectrograms which are directly accessible via the internet. Each of the gif files are identified by year, day, and time as described in the Web page. This provides a user with a specific date/time in mind a way of determining very quickly if there is data for the interval in question and, by clicking on the file name, browsing the data. Alternately, a user can browse the data for interesting features and events simply by viewing each of the gif files. When a user finds data of interest, he/she can notify us by email of the time period involved. Based on the user's needs, we can provide data on a convenient medium or by ftp, or we can mount the appropriate data and provide access to our analysis tools via the network. We can even produce products such as plots or spectrograms in hardcopy form based on the specific request of the user.

Kurth, William S.↗
NASA NTRS2020

Marine wild-capture fisheries after nuclear war

Nuclear war, beyond its devastating direct impacts, is expected to cause global climatic perturbations through injections of soot into the upper atmosphere. Reduced temperature and sunlight could drive unprecedented reductions in agricultural production, endangering global food security. However, the effects of nuclear war on marine wild-capture fisheries, which significantly contribute to the global animal protein and micronutrient supply, remain unexplored. We simulate the climatic effects of six war scenarios on fish biomass and catch globally, using a state-of-the-art Earth system model and global process-based fisheries model. We also simulate how either rapidly increased fish demand (driven by food shortages) or decreased ability to fish (due to infrastructure disruptions), would affect global catches, and test the benefits of strong pre-war fisheries management. We find a decade-long negative climatic impact that intensifies with soot emissions, with global biomass and catch falling by up to 18 ± 3% and 29 ± 7% after a US-Russia war under business-as-usual fishing – similar in magnitude to the end-of-century declines under unmitigated global warming. When war occurs in an overfished state, increasing demand increases short-term (1-2 year) catch by at most ~30% followed by precipitous declines of up to ~70%, thus offsetting only a minor fraction of agricultural losses. However, effective pre-war management that rebuilds fish biomass could ensure a short-term catch buffer large enough to replace ~43 ± 35% of today’s global animal protein production. This buffering function in the event of a global food emergency adds to the many previously-known economic and ecological benefits of effective and precautionary fisheries management.

food from the ocean↗
NASA NTRS2022

Towards Effective Drought Monitoring in the Middle East and North Africa (Mena) Region: Implications From Assimilating Leaf Area Index and Soil Moisture Into the Noah-Mp Land Surface Model for Morocco

The Middle East and North Africa (MENA) region has experienced more frequent and severe drought events in recent decades, leading to increasingly pressing concerns over already strained food and water security. An effective drought monitoring and early warning system is thus critical to support risk mitigation and management by countries in the region. Here we investigate the potential for assimilation of leaf area index (LAI) and soil moisture observations to improve the representation of the overall hydrological and carbon cycles and drought by an advanced land surface model. The results reveal that assimilating soil moisture does not meaningfully improve model representation of the hydrological and biospheric processes for this region, but instead it degrades the simulation of the interannual variation in evapotranspiration (ET) and carbon fluxes, mainly due to model weaknesses in representing prognostic phenology. However, assimilating LAI leads to greater improvement, especially for transpiration and carbon fluxes, by constraining the timing of simulated vegetation growth response to evolving climate conditions. LAI assimilation also helps to correct for the erroneous interaction between the prognostic phenology and irrigation during summertime, effectively reducing a large positive bias in ET and carbon fluxes. Independently assimilating LAI or soil moisture alters the categorization of drought, with the differences being greater for more severe drought categories. We highlight the vegetation representation in response to changing land use and hydroclimate as one of the key processes to be captured for building a successful drought early warning system for the MENA region.

Wanshu Nie↗
DOE OSTI2025

Assessment of CTF for Steady-state and Transient Post-CHF Conditions in Support of Time-at-Temperature Modeling Applications

The US nuclear industry is exploring options to improve operational economics and uprate the current fleet of light-water reactors by investigating transitioning to cladding performance–based safety criteria as opposed to the current limit, which requires complete avoidance of critical heat flux (CHF)/dryout. Past experience has shown that not all events leading to a dryout are severe enough to cause fuel performance degradation. Allowing temporary dryout of the fuel—that is, using a time-at-temperature (TaT) strategy—could allow for economic improvements via large power uprates and enhanced operational flexibility for current plants without compromising fuel integrity. To support this effort, the US Department of Energy is executing a comprehensive program that includes generating cladding material data under TaT conditions, developing new mechanistic models, and demonstrating modeling and simulation capabilities for transients of interest. This paper presents work performed to assess the CTF thermal-hydraulics subchannel code. CTF is a package used in the VERA core simulator, which will ultimately be used for TaT analysis. CTF will provide the thermal-hydraulic boundary conditions that will be needed for fuel performance analysis in the BISON code. Quantifying both the accuracy and uncertainty of post-CHF models will therefore be necessary. This paper outlines the strategy for the assessment of TaT and presents the results of using the steady-state and transient dryout experiments of the Boiling Fine-mesh Bundle Tests for CTF validation. The results show that the current model tends to overpredict steady-state critical power. This behavior translates to the transient tests, in which CTF is unable to capture transient dryout behavior. Some discussion of sensitivity analysis work being performed is provided to indicate which models must be further analyzed to properly model transient dryout and its uncertainty.

Salko Jr, Robert [ORNL] (ORCID:0000000253566679)↗