9 GeV energy gain in a beam-driven plasma wakefield accelerator
Abstract Not Provided
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract Not Provided
Microcantilevers are ideally-suited for the study of surface phenomena due to their large surface-to-volume ratios, which amplify surface effects. We show that when guest molecules bind to atoms/molecules on a microcantilever surface, the released binding energy is retained in the host surface, leading to a metastable state where the excess energy on the surface is manifested as an increase in surface stress leading to the bending of the microcantilever. When the excess energy is released, the microcantilever relaxes back to the original state, and the relaxation time depends on the particular binding process involved. Such experiments were conducted for three binding processes in vapor phase experiments: physisorption, hydrogen bonding, and chemisorption. To our knowledge, such an energy conservation approach has not been taken into account in adsorbate-induced surface effect investigations. Furthermore, these experiments illustrate that detailed molecular-level information on binding energies can be extracted from this simple micromechanical sensor.
Currently, neutrinos with energies above $10^{17}$ eV are detectable with the Surface Detector Array of the Pierre Auger Observatory. Here, the identification is efficiently performed for neutrinos of all flavors interacting in the atmosphere at large zenith angles, as well as for Earth-skimming $\tau$ neutrinos with nearly tangential trajectories relative to the earth. No neutrino candidates were found in $\sim\,14.7$ years of data taken up to 31 August 2018. This leads to restrictive upper bounds on their flux. The $90\%$ C.L. single-flavor limit to the diffuse flux of ultra-high-energy neutrinos with an $E_\nu^{-2}$ spectrum in the energy range $1.0 \times 10^{17}~{\rm eV} - 2.5 \times 10^{19}~{\rm eV}$ is $E^2 {\rm d}N_\nu/{\rm d}E_\nu < 4.4 \times 10^{-9}~{\rm GeV~cm^{-2}~s^{-1}~sr^{-1}}$, placing strong constraints on several models of neutrino production at EeV energies and on the properties of the sources of ultra-high-energy cosmic rays.
Abstract Energy, water, and agricultural resources across the globe are highly interconnected. This interconnectivity poses science challenges, such as understanding and modeling interconnections, as well as practical challenges, such as efficiently managing interdependent resource systems. Using the US as an example, this study seeks to define and explore how interconnectivity evolves over space and time under a range of influences. Concepts from graph theory and input–output analysis are used to visualize and quantify key intersectoral linkages using two new indices: the ‘Interconnectivity Magnitude Index’ and the ‘Interconnectivity Spread Index’. Using the Global Change Analysis Model (GCAM-USA), we explore the future evolution of these indices under four scenarios that explore a range of forces, including socioeconomic and technological change. Analysis is conducted at both national and state level spatial scales from 2015 to 2100. Results from a Reference scenario show that resource interconnectivity in the US is primarily driven by water use amongst different sectors, while changes in interconnectivity are driven by a decoupling of the water and electricity systems, as power plants become more water-efficient over time. High population and GDP growth results in relatively more decoupling of sectors, as a larger share of water and energy is used outside of interconnected sector feedback loops. Lower socioeconomic growth results in the opposite trend. Transitioning to a low-carbon economy increases interconnectivity because of the expansion of purpose-grown biomass, which strengthens the connections between water and energy. The results highlight that while some regions may experience similar sectoral stress projections, the composition of the intersectoral connectivity leading to that sectoral stress may call for distinctly different multi-sector co-management strategies. The methodology we introduce here can be applied in diverse geographical and sectoral contexts to enable better understanding of where, when, and how coupling or decoupling between sectors could evolve and be better managed.
We performed density functional calculations to estimate the formation energies of intermetallic alloys. We used two semilocal approximations, the generalized gradient approximation (GGA) by Perdew-Burke- Ernzerhof (PBE) and the strongly constrained and appropriately normed (SCAN) meta-GGA. In addition, we utilized two nonlocal DFT functionals, the hybrid HSE06, and the state-of-the-art random phase approximation (RPA). The nonlocal functionals such as HSE06 and RPA yield accurate formation energies of binary alloys with completely-filled d-band metals, where semilocal functionals underperform. The accuracy at the nonlocal functionals is greatly reduced when a partially-filled d-band metal is present in an alloy, while PBE-GGA outperforms in these cases. We show that the accurate prediction of formation energies by any DFT method depends on its ability to predict the accurate electronic properties, e.g., valence d-band contribution to the density of states (DOS). The SCAN meta-GGA often corrects the PBE-DOS, however, it does not provide accurate formation energies compared to PBE. This is assumed to be due to the lack of proper error cancellation that should be expected due to the similar bulk nature of both alloys and their constituents, which may improve with the modification of meta-GGA ingredients. RPA yields too negative formation energies of alloys with partially-filled d-band metals. RPA results can be corrected by restoring the exchange-correlation kernel, thereby improving the short-range electron-electron correlation in metallic densities.
Elusive as dark matter particles are, they are not the only entities that can produce small energy releases deep inside the most sensitive detectors. Cosmogenic and residual radioactivity as well as other factors can produce and slowly accumulate long-living excitations and defect configurations in materials. Unsteady and avalanche-like releases of accumulated energy can limit the dynamic range of detectors and the sensitivity of experiments. This type of mechanism, while not widely discussed in the dark matter and neutrino detectors community, got a lot of attention in discussions about systems with energy flow in the context of nonequilibrium thermodynamic. Here this paper explores the avalanche hypothesis using published data on low-energy background in detectors and available condensed-matter physics information on excitations, defects, and energetic molecules which can be produced in detector materials and examine ways to use these models to understand the origin of low-energy background in dark matter and other detectors and for suppression of these backgrounds.
We study charged particle production (p(T) > 0.5 GeV/c, vertical bar eta vertical bar < 0.8) in proton-antiproton collisions at total center-of-mass energies root s = 300 GeV, 900 GeV, and 1.96 TeV. We use the direction of the charged particle with the largest transverse momentum in each event to define three regions of eta - phi space: "toward", "away", and "transverse." The average number and the average scalar pT sum of charged particles in the transverse region are sensitive to the modeling of the "underlying event." The transverse region is divided into a MAX and MIN transverse region, which helps separate the "hard component" (initial and final-state radiation) from the "beam-beam remnant" and multiple parton interaction components of the scattering. The center-of-mass energy dependence of the various components of the event is studied in detail. The data presented here can be used to constrain and improve QCD Monte Carlo models, resulting in more precise predictions at the LHC energies of 13 and 14 TeV.
We investigate the energy-energy correlator (EEC) of hadrons produced on the same side in e + e − annihilation or in leading jets in p p collisions. We observe a remarkable universality of the correlator. Using a nonperturbative transverse momentum dependent (TMD) fragmentation function to model the transition from the “free-hadron” region to the perturbative collinear region, we are able to describe the near-side shapes and peaks over a wide range of energy for both the e + e − annihilation and the p p jet substructure measurements in terms of just two parameters. We present further predictions for the ratio of the projected three-point energy correlator to the EEC. The excellent agreement between our calculations and the experimental data may provide new insights into the role of nonperturbative physics for EECs, and suggests the possibility of exploring nonperturbative TMDs using theoretical tools developed for the energy correlators. Published by the American Physical Society 2025
An optimal damping selection strategy on the power electronics in wave energy application is introduced to increase the total energy produced from the power converter in a wave energy converter (WEC) system. A damping map for maximum energy is built for the selection. The map is based on an irregular wave-towire simulation and reliability analysis on the IGBT module. From the yearly wave mission profile, the damping selection strategy is proved to provide 40% more energy than the conventional optimal power with passive damping selection in the WEC power converter.
Purpose: To study the performance of different dual energy computed tomography (DECT) techniques, which are available today, and future multi energy CT (MECT) employing novel photon counting detectors in an image-based material decomposition task. Methods: The material decomposition performance of different energy-resolved CT acquisition techniques is assessed and compared in a simulation study of virtual non-contrast imaging and iodine quantification. The material-specific images are obtained via a statistically optimal image-based material decomposition. A projection-based maximum likelihood approach was used for comparison with the authors’ image-based method. The different dedicated dual energy CT techniques are simulated employing realistic noise models and x-ray spectra. The authors compare dual source DECT with fast kV switching DECT and the dual layer sandwich detector DECT approach. Subsequent scanning and a subtraction method are studied as well. Further, the authors benchmark future MECT with novel photon counting detectors in a dedicated DECT application against the performance of today’s DECT using a realistic model. Additionally, possible dual source concepts employing photon counting detectors are studied. Results: The DECT comparison study shows that dual source DECT has the best performance, followed by the fast kV switching technique and the sandwich detector approach. Comparing DECT with future MECT, the authors found noticeable material image quality improvements for an ideal photon counting detector; however, a realistic detector model with multiple energy bins predicts a performance on the level of dual source DECT at 100 kV/Sn 140 kV. Employing photon counting detectors in dual source concepts can improve the performance again above the level of a single realistic photon counting detector and also above the level of dual source DECT. Conclusions: Substantial differences in the performance of today’s DECT approaches were found for the application of virtual non-contrast and iodine imaging. Future MECT with realistic photon counting detectors currently can only perform comparably to dual source DECT at 100 kV/Sn 140 kV. Dual source concepts with photon counting detectors could be a solution to this problem, promising a better performance.
In this study, measurements of transverse energy–energy correlations and their associated asymmetries in multi-jet events using the ATLAS detector at the LHC are presented. The data used correspond to √s=8 TeV proton–proton collisions with an integrated luminosity of 20.2 fb –1 . The results are presented in bins of the scalar sum of the transverse momenta of the two leading jets, unfolded to the particle level and compared to the predictions from Monte Carlo simulations. A comparison with next-to-leading-order perturbative QCD is also performed, showing excellent agreement within the uncertainties. From this comparison, the value of the strong coupling constant is extracted for different energy regimes, thus testing the running of α s (μ) predicted in QCD up to scales over 1 TeV. A global fit to the transverse energy–energy correlation distributions yields α s (m Z ) = 0.1162±0.0011(exp.) +0.0084 –0.0070 (theo.) , while a global fit to the asymmetry distributions yields a value of α s (m Z ) = 0.1196±0.0013(exp.) +0.0075 –0.0045 (theo.).
The response of the ATLAS detector to large-radius jets is measured in situ using 36.2 fb -1 of $\sqrt{2}$ =13 TeV proton–proton collisions provided by the LHC and recorded by the ATLAS experiment during 2015 and 2016. The jet energy scale is measured in events where the jet recoils against a reference object, which can be either a calibrated photon, a reconstructed Z boson, or a system of well-measured small-radius jets. The jet energy resolution and a calibration of forward jets are derived using dijet balance measurements. The jet mass response is measured with two methods: using mass peaks formed by W bosons and top quarks with large transverse momenta and by comparing the jet mass measured using the energy deposited in the calorimeter with that using the momenta of charged-particle tracks. The transverse momentum and mass responses in simulations are found to be about 2–3% higher than in data. This difference is adjusted for with a correction factor. The results of the different methods are combined to yield a calibration over a large range of transverse momenta (p T ). The precision of the relative jet energy scale is 1–2% for 200 GeV < pT < 2 TeV , while that of the mass scale is 2–10%. Hence, the ratio of the energy resolutions in data and simulation is measured to a precision of 10–15% over the same p T range.
We study the event shape variables, transverse energy–energy correlation TEEC (cosφ) and its asymmetry ATEEC (cosφ) in deep inelastic scattering (DIS) at the electron–proton collider HERA, where φ is the angle between two jets defined using a transverse-momentum (k T ) jet algorithm. At HERA, jets are defined in the Breit frame, and the leading nontrivial transverse energy–energy correlations arise from the 3-jet configurations. With the help of the NLOJET++, these functions are calculated in the leading order (LO) and the next-to-leading order (NLO) approximations in QCD at the electron–proton center-of-mass energy $\sqrt{s}$ = 314 GeV. We restrict the angular region to -0.8 ≤ cosφ ≤ 0.8, as the forward- and backward-angular regions require resummed logarithmic corrections, which we have neglected in this work. Following experimental jet-analysis at HERA, we restrict the DIS-variables x, y = Q 2 /(xs), where Q 2 = -q 2 is the negative of the momentum transfer squared q 2 , to 0 ≤ x ≤ 1, 0.2 ≤ y ≤ 0.6, and the pseudo-rapidity variable in the laboratory frame (η lab ) to the range -1 ≤ η lab ≤ 2.5. The TEEC and ATEEC functions are worked out for two ranges in Q 2 , defined by 5.5GeV 2 ≤ Q 2 ≤ 80GeV 2 , called the low-Q 2 -range, and 150GeV 2 ≤ Q 2 ≤ 1000GeV 2 , called the high-Q 2 -range. We show the sensitivity of these functions on the parton distribution functions (PDFs), the factorization (μ F ) and renormalization (μ R ) scales, and on α s (M$^2_Z$). Of these the correlations are stable against varying the scale μ F and the PDFs, but they do depend on μ R . For the choice of the scale μ R =$\sqrt{\langle ET \rangle^2+Q^2}$, advocated in earlier jet analysis at HERA, the shape variables TEEC and ATEEC are found perturbatively robust. These studies are useful in the analysis of the HERA data, including the determination of α s (M$^2_Z$) from the shape variables.
On January 29–30, 2013, Fermilab hosted a workshop with the objective to identify and explore the nuclear energy relevant research and development that would be possible in a nuclear energy station associated with the Project X Linear Accelerator (linac). Recognizing that the U.S. Nuclear Energy mission will always require the use of test reactors, the hypotheses that a nuclear energy station associated with Project X could accelerate and enhance the ability to test and evaluate new materials and advanced reactor fuels was explored. Forty-five of the invited participants including staff from the U.S. Department of Energy (DOE), DOE Laboratories, universities, and other institutes attended the workshop. These participants were invited based on their technical expertise and relevant experience.
We report on a search for new physics in a final state with two same sign leptons, missing transverse energy, and significant hadronic activity at a center of mass energy $\sqrt{s}$ = 7 TeV. The data were collected with the CMS detector at the CERN LHC and correspond to an integrated luminosity of 0.98 $\mathrm{fb}^{-1}$. Data--driven methods are developed to estimate the dominant Standard Model backgrounds. No evidence for new physics is observed. The dominant background to the analysis comes from failures of lepton identification in Standard Model $t\bar{t}$ events. The $t\bar{t}$ production cross section in the dilepton final state is measured using 3.1 $\mathrm{fb}^{-1}$ of data. The cross section is measured to be 194 $\pm$ 72 (stat) $\pm$ 24 (syst) $\pm$ 21 (lumi) pb. An algorithm is developed that uses tracking information to improve the reconstruction of missing transverse energy. The reconstruction of missing transverse energy is commissioned using the first collisio ns recorded at 0.9, 2.36 and 7 TeV data. Events with abnormally large values of missing transverse energy are identified as arising from anomalous signals in the calorimeters. Tools are developed to identify and remove these anomalous signals.
The U.S. Department of Energy is funding, through the Grid Modernization Program, the Alaska Microgrid Partnership (AMP), a multi-stakeholder collaborative comprised of national labs and Alaska based partners. The over-arching goal of AMP is to reduce the use of total imported fuel into communities to secure all energy services by at least 50% in Alaska's remote microgrids without increasing system lifecycle costs, while improving overall system reliability, security, and resilience. One goal of AMP is to investigate if a combination of Energy Efficiency (EE) and high contribution (from Renewable Energy (RE)) power systems can reduce total imported energy usage by 50% while lowering Life Cycle Costs (LCC) and improving reliability and resiliency. A techno-economic analysis was conducted for the community of Chefornak to investigate system architectures that could meet the goal of reducing imported fuel consumption by 50% or more.
For many countries, marine renewable energy (MRE) is the most recent entry into their renewable energy portfolio. MRE involves the generation of energy from the movement of seawater including tides, waves, and persistent ocean currents, as well as from the gradients of temperature and salinity in the oceans. Some countries also include energy generation from the open waters of large rivers as part of MRE. Each MRE resource requires a different type of device to harvest that energy, placed in the appropriate portion and depth of the ocean or large river and secured to the seabed either by weight or by anchors. At full scale, these devices are large; Figure 1.1 puts the size of these devices in the context of other technologies and well-known landmarks for scale. The MRE devices generally represent the largest devices available.
Molecule size correlates with the number of electrons on electronic energies and strength of anharmonicity on vibrational properties, however, it is challenging to address using classical computing. In this study, variational quantum eigensolver (VQE) algorithm was implemented on a quantum simulator to quantify electronic and vibrational energies and reaction pathways of CO2 + NH3 = NH2COOH. The VQE-based Hartree-Fock-Embedding algorithm was adopted to benchmark electronic energies for a series of molecules (doi.org/10.1063/5.0188249) and quantify the reaction energy profile of the CO2 capture reaction (doi.org/10.1116/5.0137750). The generated reaction profile is in good agreement with the classical high-level Coupled-Cluster-Singles-and-Doubles (CCSD) results. The quantum computing algorithm also helps enhance the calculation of vibrational ground-state energies by considering the many-body coupling using the Vibrational Self-Consistent Field method, providing results for CO2 and NH3 molecules with accuracy comparable to the direct diagonalization method. Our approach indicates quantum computing can be applied to solve practical problems.