Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Indium stability on InGaAs during atomic H surface cleaning

Atomic H exposure of a GaAs surface at 390 deg. C is a relatively simple method for removing the native oxides without altering the surface stoichiometry. In-situ reflection high energy electron diffraction and angle-resolved x-ray photoelectron spectroscopy have been used to show that this procedure applied to In{sub 0.2}Ga{sub 0.8}As effectively removes the native oxides resulting in an atomically clean surface. However, the bulk InGaAs stoichiometry is not preserved from this treatment. The In:Ga ratio from the substrate is found to decrease by 33%. The implications for high-mobility channel applications are discussed as the carrier mobility increases nearly linearly with the In content.

36 MATERIALS SCIENCE↗

Unexpected behaviour of one Pb monolayer deposited on aluminum oxide thin film grown on Ag(111)

Using scanning tunneling microscopy (STM), Auger electron spectroscopy, and low energy electron diffraction, we have observed a surprising complete dissolution at room temperature of one lead monolayer deposited by evaporation on an aluminum oxide thin film (∼0.8 nm thick) previously grown on Ag (111). We have observed the quasi-instantaneous diffusion of the lead deposit through the oxide layer to the silver/oxide interface. After the diffusion process, lead atoms form a Moiré superstructure, which is characterized by STM through the oxide layer. This unexpected behavior puts in light the very weak interaction between the aluminum oxide and the silver substrate.

36 MATERIALS SCIENCE↗

Growth kinetics and island evolution during double-pulsed molecular beam epitaxy of InN

The kinetic processes of InN growth using alternating source fluxes with sub-monolayer In pulses in plasma-assisted molecular beam epitaxy have been investigated. Growth at various temperatures reveals the existence of two growth regimes. While growth at low temperatures is solely governed by surface diffusion, a combination of decomposition, desorption, and diffusion becomes decisive at growth temperatures of 470 °C and above. At this critical temperature, the surface morphology changes from a grainy structure to a structure made of huge islands. The formation of those islands is attributed to the development of an indium adlayer, which can be observed via reflection high energy electron diffraction monitoring. Based on the growth experiments conducted at temperatures below T{sub Growth} = 470 °C, an activation energy for diffusion of 0.54 ± 0.02 eV has been determined from the decreasing InN island density. A comparison between growth on metalorganic vapor phase epitaxy GaN templates and pseudo bulk GaN indicates that step edges and dislocations are favorable nucleation sites. Based on the results, we developed a growth model, which describes the main mechanisms of the growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Selective deposition of a crystalline Si film by a chemical sputtering process in a high pressure hydrogen plasma

The selective deposition of Si films was demonstrated using a chemical sputtering process induced by a high pressure hydrogen plasma at 52.6 kPa (400 Torr). In this chemical sputtering process, the initial deposition rate (R{sub d}) is dependent upon the substrate type. At the initial stage of Si film formation, R{sub d} on glass substrates increased with elapsed time and reached to a constant value. In contrast, R{sub d} on Si substrates remained constant during the deposition. The selective deposition of Si films can be achieved by adjusting the substrate temperature (T{sub sub}) and hydrogen concentration (C{sub H2}) in the process atmosphere. For any given deposition time, it was found that an optimum C{sub H2} exists for a given T{sub sub} to realize the selective deposition of a Si film, and the optimum T{sub sub} value tends to increase with decreasing C{sub H2}. According to electron diffraction patterns obtained from the samples, the selectively prepared Si films showed epitaxial-like growth, although the Si films contained many defects. It was revealed by Raman scattering spectroscopy that some of the defects in the Si films were platelet defects induced by excess hydrogen incorporated during Si film formation. Raman spectrum also suggested that Si related radicals (SiH{sub 2}, SiH, Si) with high reactivity contribute to the Si film formation. Simple model was derived as the guideline for achieving the selective growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A crystalline oxide passivation for Al{sub 2}O{sub 3}/AlGaN/GaN

In situ X-ray photoelectron spectroscopy and low energy electron diffraction are performed to study the formation of a crystalline oxide on the AlGaN surface. The oxidation of the AlGaN surface is prepared by annealing and remote N{sub 2} + O{sub 2} plasma pretreatments resulting in a stable crystalline oxide. The impact of the oxide on the interface state density is studied by capacitance voltage (C-V) measurements. It is found that a remote plasma exposure at 550 °C shows the smallest frequency dispersion. Crystalline oxide formation may provide a novel passivation method for high quality AlGaN/GaN devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studying the Surface Conductivity of a Thallium Bilayer on Si(111) Substrate after Adsorption of Lithium and Rubidium

Changes in the state of a thallium bilayer on Si(111) substrate, Si(111)6 × 6–Tl, after adsorption of lithium and rubidium were studied using low-energy electron-diffraction and four-point probe-conductivity measurements. New surface reconstructions 5 × 1 and 5√3×5√3 were observed after the adsorption of lithium, and 2 × 2 and √3×√3 reconstructions appeared after the adsorption of rubidium. The surface conductivity of silicon substrates was studied as a function of the dose of deposited adsorbate. It is established that the formation of both 5 × 1 and 2 × 2 reconstructions retains the conducting properties of a two-dimensional channel constituted by the thallium bilayer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic and magnetic properties of (1 1 1)-oriented CoCr{sub 2}O{sub 4} epitaxial thin film

We report on the fabrication of high quality (1 1 1)-oriented ferrimagnetic normal spinel CoCr{sub 2}O{sub 4} epitaxial thin films on single crystal Al{sub 2}O{sub 3} substrates. The structural, electronic, and magnetic properties were characterized by in-situ reflection high energy electron diffraction, atomic force microscopy, X-ray diffraction, X-ray photoemission spectroscopy, dc magnetization measurement, and element resolved resonant X-ray magnetic scattering. The comprehensive characterization reveals that no disorder in the cation distribution or multivalency issue is present in the samples. As a result, Kagomé and triangular layers are naturally formed via this specific growth approach. These findings offer a pathway to fabricate two dimensional Kagomé heterostructures with exotic quantum many-body phenomena by means of geometrical design.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure of singly terminated DyScO3 (110) surfaces

We have studied the polar surface of singly terminated DyScO{sub 3} (110) crystals by reflective high-energy electron diffraction, surface x-ray diffraction and angle-resolved mass spectroscopy of recoiled ions. These techniques show that the surfaces are (1 x 1) reconstructed, which points to the absence of ordered cation vacancies at the surface. The best surfaces were obtained after a selective chemical wet etch. We suggest that for ScO{sub 2} terminated surfaces, adsorbates, or oxygen vacancies are most likely to occur in order to overcome the polarity difference between stoichiometric bulk crystal and vacuum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase composition of films in a Bi-S system and formation of Bi{sub 2}S{sub 3} films with different substructures

Electron diffraction was used to study the formation of phases in a Bi-S system. It is shown that the phase with composition Bi{sub 2}S{sub 3} appears as result of consecutive deposition of Bi and S irrespective of the order of deposition; this phase also appears in the case of simultaneous deposition of components. The films formed at room temperature are amorphous. Amorphous thin Bi{sub 2}S{sub 3} films are stable at room temperature and crystallize at temperatures in the region of {approx}423 K. The conditions for formation of Bi{sub 2}S{sub 3} films with different substructures are established.

36 MATERIALS SCIENCE↗

Phase composition of films in a Bi-S system and formation of Bi{sub 2}S{sub 3} films with different substructures

Electron diffraction was used to study the formation of phases in a Bi-S system. It is shown that the phase with composition Bi{sub 2}S{sub 3} appears as result of consecutive deposition of Bi and S irrespective of the order of deposition; this phase also appears in the case of simultaneous deposition of components. The films formed at room temperature are amorphous. Amorphous thin Bi{sub 2}S{sub 3} films are stable at room temperature and crystallize at temperatures in the region of {approx}423 K. The conditions for formation of Bi{sub 2}S{sub 3} films with different substructures are established.

36 MATERIALS SCIENCE↗

In adlayer mediated molecular beam epitaxial growth and properties of a-plane InN on freestanding GaN

The role of the In adlayer on the morphological and structural properties of nonpolar a-plane InN films was elucidated during the plasma-assisted molecular beam epitaxy on freestanding GaN. Reflection high energy electron diffraction during In adsorption experiments on a-plane InN surfaces revealed a stable In adlayer coverage of {approx}2 ML. This In adlayer-mediated growth was responsible for achieving atomically smooth surfaces (rms roughness of <1 nm), phase-pure material with lower x-ray rocking curve widths ({delta}{omega}<0.5 deg.), lower crystal mosaic tilt/twist, and decreased stacking fault densities, compared to N-rich conditions. The photoluminescence peak emission and band gap energy of the a-plane InN films were {approx}0.63 and {approx}0.7 eV, respectively.

36 MATERIALS SCIENCE↗

Electrochemical properties of sputter-deposited MoO{sub 3} films in lithium microbatteries

Molybdenum oxide (MoO{sub 3}) films were prepared by magnetron sputtering using an Mo target. The films were sputtered in the reactive atmosphere of an argon-oxygen gas mixture under various substrate temperatures, T{sub s}, and oxygen partial pressures, p(O{sub 2}). The effects of the growth conditions on the microstructure were examined using reflection high-energy electron diffraction and x-ray photoelectron spectroscopy. The analyses indicate that stoichiometric and polycrystalline MoO{sub 3} films were obtained at T{sub s} = 445 Degree-Sign C and p(O{sub 2}) = 61%. The applicability of the sputtered MoO{sub 3} films for lithium microbattery application has been demonstrated. The discharge-charge profiles, the kinetics of lithium intercalation process in the film, and the cycling behavior have been investigated in detail to understand the effect of microstructure on the electrochemical performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anomalous structural evolution and √(3)×√(3) reconstruction of a clean Si(111) surface observed after thermal desorption of thallium

The authors have observed anomalous structural evolution of a clean Si(111) surface, which was prepared first by thallium (Tl) deposition on a Si(111)7 × 7 surface, leading to incomplete formation of a Tl/Si(111)1 × 1 structure at 300 °C and subsequent desorption of Tl at 350 °C. Thus prepared clean Si(111) surfaces exhibit structural changes with increase of temperature: 2×1→(√(3)×√(3))R30°→2×1→5×5→7×7, as observed by low-energy electron diffraction and scanning tunneling microscopy. Among the above structures, the (√(3)×√(3))R30° formed at 450–550 °C is found not to be a simple adatom structure. Instead, by means of ab-initio calculations a new metastable (√(3)×√(3))R30° reconstruction was found, having analogous structural features and formation origin to a 2 × 1 reconstruction known as the Pandey chain model. This new (√(3)×√(3))R30° model is 0.09 eV per surface atom less favorable than the 2 × 1 reconstruction. A reason for the anomalous occurrence of the (√(3)×√(3))R30° structure is explored with an aid of Monte Carlo simulations.

42 ENGINEERING↗

In-situ imaging of the nucleation and growth of epitaxial anatase TiO2(001) films on SrTiO3(001)

The growth of TiO2 anatase films on Nb doped SrTiO3(001) by oxygen-assisted molecular beam epitaxy has been studied in-situ by scanning tunneling microscopy. We show that the initial growth follows the Stranski-Krastanov mode, where islands form on top of a wetting layer consisting of two monolayers (ML) of TiO2. The epitaxial islands subsequently nucleate and coalescence into large commonly-oriented crystallites. The (4x4) reconstruction observed by reflection high-energy electron diffraction (RHEED) is shown to result from the coexistence of individual (4x1) and (1x4) reconstructions present on different crystallite surfaces. The anatase grows in units of bilayers, resulting in a step height of 2 ML (~0.5 nm). This result explains the fact that the measured period of the RHEED specular-beam intensity oscillations corresponds to the time required for deposition of 2 ML. Ar ion sputtering and UHV annealing results in a transformation to coexisting (4x1) and (1x4) reconstructed terraces on individual crystallites, as commonly observed by ex-situ STM studies.

36 MATERIALS SCIENCE↗

Magnetic properties of Mn{sub 3}O{sub 4} film under compressive stress grown on MgAl{sub 2}O{sub 4} (001) by molecular beam epitaxy

High quality single-crystalline Mn{sub 3}O{sub 4} thin films were grown on MgAl{sub 2}O{sub 4} (001) substrates by plasma-assisted molecular beam epitaxy. It is found that the films are compressed in the (001) plane and elongated in the perpendicular direction via in-situ reflection high-energy electron diffraction and ex-situ X-ray diffraction, which is confirmed by frequency hardening of relevant Raman bands. Different from the bulk, the epitaxial film with a thickness of 65 nm shows more obvious magnetic anisotropy and higher magnetic phase transition temperatures (T{sub N} = 50 K, T{sub 1} = 40.5 K, and T{sub 2} = 36 K) than that of the bulk (T{sub N} = 42 K, T{sub 1} = 39 K, and T{sub 2} = 33 K). The variation of magnetic properties could be attributed to the changes of interplay among spin, orbital, and lattice degrees of freedom owing to the residual strain in the epitaxial film.

36 MATERIALS SCIENCE↗

Mapping the magnetic and crystal structure in cobalt nanowires

Using off-axis electron holography under Lorentz microscopy conditions to experimentally determine the magnetization distribution in individual cobalt (Co) nanowires, and scanning precession-electron diffraction to obtain their crystalline orientation phase map, allowed us to directly visualize with high accuracy the effect of crystallographic texture on the magnetization of nanowires. The influence of grain boundaries and disorientations on the magnetic structure is correlated on the basis of micromagnetic analysis in order to establish the detailed relationship between magnetic and crystalline structure. This approach demonstrates the applicability of the method employed and provides further understanding on the effect of crystalline structure on magnetic properties at the nanometric scale.

36 MATERIALS SCIENCE↗

In situ surface and interface study of crystalline (3×1)-O on InAs

The oxidation behavior of de-capped InAs (100) exposed to O{sub 2} gas at different temperatures is investigated in situ with high resolution of monochromatic x-ray photoelectron spectroscopy and low energy electron diffraction. The oxide chemical states and structure change dramatically with the substrate temperature. A (3 × 1) crystalline oxide layer on InAs is generated in a temperature range of 290–330 °C with a coexistence of In{sub 2}O and As{sub 2}O{sub 3}. The stability of the crystalline oxide upon the atomic layer deposition (ALD) of HfO{sub 2} is studied as well. It is found that the generated (3 × 1) crystalline oxide is stable upon ALD HfO{sub 2} growth at 100 °C.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase formation and phase transformations in Bi-Te films with nanoscale thickness

The processes of phase formation are studied in a binary Bi-Te system using the kinematic electron diffraction technique. It is established that, in the case of both simultaneous and layer-by-layer deposition of bismuth and tellurium and irrespective of the order of their deposition, phases with compositions Bi{sub 2}Te{sub 3} and BiTe are formed at the condensation plane in the amorphous and crystalline state, respectively. The amorphous Bi{sub 2}Te{sub 3} phase is stable at room temperature and crystallizes at a temperature of 423 K. It is shown that ordering of the phase BiTe is not a consequence of atomic order of the structure; rather, it is caused by the real structure of the object (by blocks)

36 MATERIALS SCIENCE↗