Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EUTECTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Microstructural characterization of U-20Pu-10Zr-4Sb and U-20Pu-10Zr-4Sb-4Ln

Antimony is being investigated as a potential additive to metallic fuel to control fuel-cladding chemical interactions (FCCI). The most detrimental elements involved in FCCI are fission product lanthanides, leading to brittle intermetallics and low melting eutectic phases. Previous investigations of Sb as an additive focused on U-10Zr, in wt. %, as the fuel. The current investigation expands that to include Pu in the fuel. Here, two alloys, U-20Pu-10Zr-4Sb and U-20Pu-10Zr-4Sb-4Ln (wt. %, Ln=53Nd-25Ce-16Pr-6La) have been investigated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) to characterize the fuel as-cast microstructure and the microstructure after introduction of lanthanides. Sb reacts with Zr initially, forming Zr 2 Sb and Zr 5 Sb 3 , with as much as 20 at. % interstitial Pu present. In the presence of lanthanides, Sb forms Ln 4 Sb 3 with the lanthanides, containing ~14 at. % Pu. The Pu is substitutional for the lanthanides in the crystal lattice.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

First-principles investigation of the thermophysical properties of NaCl, PuCl 3 , and NaCl-PuCl 3 Molten salts

Molten salts have a variety of applications that span the nuclear and solar industries, and which involve thermal storage and heat transfer. There is a present knowledge gap in the thermophysical properties of molten salts, which limits the readiness level of molten salt applications. This is especially pertinent for molten salt reactors where the fissile material is dissolved within the molten salt. Ab initio molecular dynamics is a common method employed to investigate the structural and thermophysical properties at elevated temperatures. NaCl-PuCl 3 is a candidate fuel salt in molten salt reactors. The scope of this study is to investigate the seven unique compositions and a range of temperatures of NaCl-PuCl 3 and calculate the density, heat capacity, compressibility, enthalpy of mixing, and coefficient of thermal expansion. Within this work, the van der Waals (vdW) interactions are primarily handled with the vdW-DF2 functional but spot-checked with both the dDsC and DFT-D3 methods. The calculated densities are in good agreement with the NaCl and the eutectic compositions, and no experimental values exist for PuCl 3 at these temperatures. The densities are fit to a first-order Redlich-Kister expansion as a function of both composition and temperature. The heat capacity in the literature is scattered but the calculated values agree well with one of the experimental results. Here, the heat capacity increases as a linear function with respect to concentration at a rate of about 7.5 J/mol-K per 10 mol% PuCl 3 .

36 MATERIALS SCIENCE↗

Phase transformations and phase equilibria in the Co–Sn–Ti system in the crystallization interval

The Co–Sn–Ti system was studied in the crystallization interval (below ~50 at% Sn) by the methods of Scanning Electron Microscopy, microprobe analysis, Differential Thermal Analysis, X-ray diffraction. The liquidus and solidus projections and the melting diagram were constructed. Only Co{sub 2}TiSn(τ1) ternary compound (Heusler phase-L1{sub 2}) was found in equilibria with the liquid in the concentration interval studied. Taking into account our recent data, the liquidus projection is characterized by the fields of primary crystallization of (βTi), (Co), binary-based phases Ti{sub 3}Sn, Ti{sub 2}Sn, Ti{sub 5}Sn{sub 3}, Ti{sub 6}Sn{sub 5}, Ti{sub 2}Co, TiCo, TiCo{sub 2} (c), TiCo{sub 2} (h), TiCo{sub 3}, βCo{sub 3}Sn{sub 2}, CoSn and ternary τ1. The solidus projection is characterized by thirteen three-phase fields, which result from invariant four-phase equilibria, five are of eutectic type (E) and eight of transition type (U) and the existence of one more region Ti{sub 2}Sn{sub 3}+βCoSn{sub 3}+(Sn) in the solidus projection is discussed. - Graphical abstract: Liquidus projection of the Ti–Ð ÐŽÐ Ñ• –Sn system. Fields of crystallization, isotherms and monovariant lines. - Highlights: • The Ti–Co–Sn system is first studied in the composition range up to 50% of Sn. • Liquidus and solidus projections, melting diagram and reaction scheme are constructed. • One ternary compound form in the studied temperature interval: (Co{sub 2}TiSn(τ1)).

36 MATERIALS SCIENCE↗

Three-dimensional analysis of the microstructure and bio-corrosion of Mg–Zn and Mg–Zn–Ca alloys

The effects of the morphology and the distribution of secondary phases on the bio-corrosion properties of magnesium (Mg) alloys are significant. Focused Ion Beam (FIB) tomography and Micro X-Ray computed tomography (Micro-CT) have been used to characterise the morphology and distribution of (α-Mg + MgZn) and (α-Mg + Ca{sub 2} + Mg{sub 6} + Zn{sub 3}) eutectic phase mixtures in as-cast Mg–3Zn and Mg–3Zn–0.3Ca alloys, respectively. There were two different 3D distributions: (i) an interconnected network and (ii) individual spheres. The tomography informed our understanding of the relationship between the distribution of secondary phases and the development of localized corrosion in magnesium alloys. - Highlights: • Multi-scale tomography was used to characterise the morphology and distribution of secondary phases in Mg alloys. • The development of localized corrosion was investigated using tomography. • An improved understanding of the microstructure and corrosion was achieved using Micro-CT tomography.

36 MATERIALS SCIENCE↗

Effect of as-cast microstructure heterogeneity on aging behavior of a high-pressure die-cast A380 alloy

Highlights: • The surface layer hardened much faster than the central region during age. • More quantity of finer precipitates was found in the surface layer during age. • The surface layer had a lower activation energy of precipitation. • Si promoted the precipitation via inducing dislocations in matrix. - Abstract: Microstructure and hardness evolution of a vacuum-assistant die-cast A380 alloy during heat treatment were investigated. Both surface layer and central region of the casting component were analyzed in die-cast state, solutionized state and artificial age state. During the artificial age, the surface layer hardened more significantly than the central region due to faster precipitation and more refined hardening phases in the surface layer. Detailed analysis on the macro-segregation, microstructure morphology and grain size revealed that the different aging behaviors exhibiting in the surface and the central region were mainly attributed to a combining effect of the enrichment of Si and Cu at the surface layer, the fully-divorced morphology of eutectic in die-cast microstructure, and the presence of the externally solidified crystals at the central region. The presence of the Si particles, which exhibited quite different thermal expansion properties, changed the density and the distribution of the dislocations in the α-Al matrix, and consequently changed the precipitation of the hardening phases.

36 MATERIALS SCIENCE↗

Size dependence of microstructure of AlSi10Mg alloy fabricated by selective laser melting

Highlights: • Plate-shaped samples with various widths were fabricated via selective laser melting. • The hardness of AlSi10Mg samples slightly decreased with decreasing sample width. • The alloy sample size had a slight effect on microstructure of the α-Al matrix. • Precipitation of Si phase in α-Al matrix was enhanced by reducing the sample size. • The softening by reducing sample size is likely due to their slower cooling rate. - Abstract: In order to investigate the size dependence of microstructure of the AlSi10Mg alloy fabricated by selective laser melting (SLM) combined with a powder bed technique, plate-shaped AlSi10Mg alloy samples with various widths (ranging from approximately 10 mm to 0.3 mm) were produced in this study. All the fabricated samples exhibited characteristic microstructural morphologies consisting of melt pools with columnar α-Al grains surrounded by fine eutectic Si particles, whereas their sample sizes had a relatively small effect on the texture and average grain size of the α-Al matrix. However, the formation of fine Si precipitates inside the columnar α-Al grains was observed more often for the smaller-sized samples, which could be a possible dominant contributor to the observed softening of the sample by reducing sample size. The obtained results were utilized for discussing the size dependence of the strength of the SLM-manufactured porous alloy samples.

36 MATERIALS SCIENCE↗

Effect of Bi on the microstructure and mechanical properties of Sn-Zn alloys processed by rolling

Highlights: • Sn-Zn-Bi is proposed for the first time as the cladding in linear explosive device. • Bi can significantly refine the microstructure of Sn-Zn. • Bi can enhance both strength and ductility of Sn-Zn processed by rolling. • The 5 wt% Bi in Sn-3Zn leads to finest and most homogenous grains after rolling. - Abstract: Sn-Zn based alloys including Sn-3Zn, Sn-3Zn-1Bi, and Sn-3Zn-5Bi were prepared by casting and rolling, in efforts to assess their feasibility for the application as cladding materials in detonating and explosive cords. It was found that Bi significantly refined the solidification microstructure, changing the configuration of Sn-Zn eutectic from well-aligned Zn-rich precipitates/needles to misaligned Zn-rich flakes. During deformation, second phases like Zn-rich precipitates and Bi particles, and Bi solutes were effective in grain refinement since second phase particles provided more sites for nucleation and more obstacles to growth of new recrystallized grains. Tensile results revealed that Bi addition enhanced both strength and ductility of the rolled Sn-Zn-Bi alloys. The Sn-3Zn-5Bi alloy possessed superior strength and ductility (UTS: 84.4 MPa; Yield strength: 68.3 MPa; Elongation: 75.2%) due to its finest and most homogeneous equiaxed grains. Based on decent mechanical properties, the Sn-Zn-Bi alloys could be well qualified for the application as cladding materials.

36 MATERIALS SCIENCE↗

Low cycle fatigue behavior of AlSi10Mg(Cu) alloy at high temperature

Highlights: • The cyclic stress response of AlSi10Mg(Cu) alloy in LCF regime is temperature-dependent. • Precipitates transitions were observed after high temperature cycle loading. • Changes in the interaction mechanism between dislocations and nanoparticles lead to different cyclic stress responses. - Abstract: Low cycle fatigue (LCF) behavior of AlSi10Mg(Cu) alloy was investigated at 100 °C and 250 °C over a range of strain amplitude from 0.25% to 0.40%. Cycle stress response, hysteresis loops, fatigue life, as well as post-fatigue microstructure were studied in detail. Except 0.25%, the alloy performed cycle hardening behavior at 100 °C and softening behavior at 250 °C at any given strain amplitude, which corresponded well with the observed phenomena in hysteresis loops. At any given temperature, cyclic stress increases while fatigue life decreases with the increasing strain amplitude. The fatigue life of the studied alloy at 100 °C was higher than that at 250 °C under the same strain amplitude. Fractography indicated that most fatigue crack initiated from casting defects. The fatigue crack propagation was mainly characterized by fatigue striations and tear ridges in any conditions. Section inspection shows that the number of cracked eutectic Si increases with decreasing the temperature or increasing strain amplitude. Post-mortem transmission electron microscopy (TEM) investigations indicated that cyclic hardening behavior at 100 °C was due to the pinning effect of coherent precipitates (β″-Mg{sub 2}Si and GP zones). Most of tiny coherency precipitates and clusters transformed to large semi-coherency Q′ and β′-Mg{sub 2}Si precipitates after cyclic loading at 250 °C, leading to the sharp decrease of pinning number and dislocation density, which is a key reason for the cyclic softening. Another factor is that more dislocations can be activated and dislocation climb is easier at higher temperature.

36 MATERIALS SCIENCE↗

Thermoelectric properties of BiSbTe-type alloys prepared by chill-casting and cryo-milling

The thermoelectric properties of Bi x Sb 1-x Te 3 processed through milling have been extensively studied with varied results that needs to be rationalized. Since cryo-milling is a relatively cleaner milling process compared to other milling processes, in this study we explore this technique to reduce the particle size prior to compaction to get an insight into the thermoelectric properties. We first report the results of cryomilled BiSbTe 3 compacted by spark plasmas sintering (SPS) process and show that milling leads to a change in transport behavior from ‘p’ to ‘n’ type similar to that reported for Bi 2 Te 3 . It is shown that the defects induced by milling is responsible for this change in materials behavior. We further study the effect of change in Bi to Sb ratio and excess tellurium on the thermoelectric properties when processed through cryo-milling as well as casting using a chilled copper block. Excess tellurium leads to a microstructure containing a fraction of layered eutectic that gets further fragmented during cryo-milling. Although the Seebeck coefficient does not change significantly, reflecting the cleanliness of the process, the thermal conductivity changes during hot compaction leading to an improvement of ZT. However, a comparison of all the reported results does not reveal any systematics in thermoelectric properties reflecting the difficulties with these materials.

36 MATERIALS SCIENCE↗

High damping NiTi/Ti 3 Sn in situ composite with transformation-mediated plasticity

The concept of transformation-induced plasticity effect is introduced in this work to improve the plasticity of brittle intermetallic compound Ti3Sn, which is a potent high damping material. This concept is achieved in an in situ NiTi/Ti3Sn composite. The composite is composed of primary Ti3Sn phase and (NiTi + Ti3Sn) eutectic structure formed via hypereutectic solidification. The composite exhibits a high damping capacity of 0.075 (indexed by tan δ), a high ultimate compressive strength of 1350 MPa, and a large plasticity of 27.5%. In situ synchrotron high-energy X-ray diffraction measurements revealed clear evidence of the stress-induced martensitic transformation (B2 → B19) of the NiTi component during deformation. The strength of the composite mainly stems from the Ti3Sn, whereas the NiTi component is responsible for the excellent plasticity of the composite.

Composite↗

Chemical partitioning for the Co--Pr system: First-principles, experiments and energetic calculations to investigate the hard magnetic phase

Co 5 Pr-D2 d is promising permanent magnet. Due to its peritectic formation feature, there is a synthetic challenge to produce single Co 5 Pr-D2 d phase. The object of our study is to assess thermodynamic pathways for crystalline phases under far-from-equilibrium conditions by combining first-principles calculations and experimental measurements into a robust description of the thermodynamic behavior. The energetic calculations, temperature and time dependent phase selections are predicted under varying degrees of chemical partitioning. Our calculation to assess the chemical partitioning-temperatures indicates that the major magnetic compounds: Co 17 Pr 2 -α, Co 5 Pr-D2 d , Co 19 Pr 5 -β, and Co 7 Pr 2 -χ form from a congruent manner to eutectic reactions with decreasing cooling rate. The compositions of the compounds from these highly driven liquids can be far from equilibrium.

36 MATERIALS SCIENCE↗

Mechanism of heat affected zone cracking in Ni-based superalloy DZ125L fabricated by laser 3D printing technique

Laser 3D printing is a promising technique to repair damaged Ni-based superalloy components. However, the occurrence of heat affected zone (HAZ) cracking severely limits its applicability. In this paper, we unravel the cracking mechanism by studying the element, phase, defect, and strain distribution around an intergranular crack that initiated from the primary HAZ. Using synchrotron X-ray Laue microdiffraction, we measured high tensile strain/stress transverse to the building direction in both the primary HAZ and the cladding layers, as well as high-density dislocations, which resulted from the thermal contraction and rapid precipitation of γ' phase. The crack initiated because the transverse tensile strain/stress tore up the liquid film formed by the low-melting point preexisting phases in the primary HAZ, such as γ/γ' eutectics and coarse γ' precipitates. The incoherent carbide particles were frequently observed near the crack root as local strain concentrators. In the cladding layers, micro-segregation could not be completely avoided, thus the hot crack continued to propagate over several layers with the assistance of the transverse tensile stress. Finally, our investigations provide a useful guideline for the optimization of the 3D printing process to repair Ni-based superalloys with high susceptibility to hot cracking.

36 MATERIALS SCIENCE↗

Multimodal and multiscale strengthening mechanisms in Al-Ni-Zr-Ti-Mn alloy processed by laser powder bed fusion additive manufacturing

The unique thermokinetics of laser-powder bed fusion additive manufacturing (L-PBFAM) has been exploited for development of a novel high-strength Al-Ni-Ti-Zr-Mn alloy. The addition of 0.5 wt% Mn leads to extraordinary improvement in ultimate tensile strength (502 MPa) and work hardening due to the activation of two Mn-induced strengthening mechanisms. First, by a bimodal particle strengthening effect due to Al 31 Mn 6 Ni 12 nano-quasi-crystal particles rejected in inter-dendritic spaces and fibrous Al 3 Ni eutectic dendritic channels, which predominately contributes to the strength improvement, and second by solid solution strengthening from remaining Mn entrapped in Al. These mechanisms supplement the particle strengthening effect imparted by coherent and incoherent Al 3 (Ti,Zr) co-precipitates present at melt pool boundaries, dislocation strengthening due to solidification induced strain, and Hall-Petch and backstress strengthening effect due to heterogenous grain size distribution occurring at various length scales. In conclusion, the solidification dynamics and hierarchical heat distribution that are associated with L-PBFAM resulted in complex spatial variations in these strengthening phenomena and were investigated via a high-throughput multiscale structure–property correlation that involved thermokinetic simulation, X-ray diffraction, high-resolution nanoindentation mapping, and site-specific transmission electron microscopy of the alloy.

36 MATERIALS SCIENCE↗

Surface smoothing for laser powder-bed Ti-6Al-4V by a transient liquid phase

Surface roughness is the primary driver of fatigue for additively manufactured metals. To address surface roughness, this work introduces a new method to smooth features beyond line-of-sight without material removal. The method applies a coating that triggers local surface remelting by activating a eutectic reaction during heat treatment. The associated liquid phase then wets and isothermally solidifies into a smoother surface. For Ti-6Al-4V fabricated with laser powder bed fusion, samples with and without TLP smoothing (using a Cu coating) were characterized with a suite of techniques, including mechanical testing, electron backscatter diffraction, synchrotron X-ray tomography, and fractography. TLP smoothing reduced surface roughness by 80% and amplified compressive residual stress at the surface by about 50%. With statistically equivalent virtual microstructures, crystal plasticity scrutinized the roles of phases, porosity, and surface roughness. Although the tensile strain-to-failure was reduced to 1% strain, the TLP smoothing process increased high-cycle fatigue strength by about 20% compared to control samples, pointing to future opportunities to optimize the new process through various coating compositions and heat treatment schedules. Overall, this work establishes a new paradigm for treating surfaces of materials for smoothness and compressive residual stress.

Additive manufacturing↗

Ion exchange and electrochemical evaluation of the microporous phosphate Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10}

A new lithium iron(III) phosphate, Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10}, has been synthesized and is currently under electrochemical evaluation as an anode material for rechargeable lithium-ion battery applications. The sample was prepared via the ion exchange reaction of Cs{sub 5}K{sub 4}Fe{sub 7}(PO{sub 4}){sub 10}1 in the 1 M LiNO{sub 3} solution under hydrothermal conditions at 200 deg. C. The fully Li{sup +}-exchanged sample Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10}2 cannot yet be synthesized by conventional high-temperature, solid-state methods. The parent compound 1 is a member of the Cs{sub 9-x}K{sub x}Fe{sub 7}(PO{sub 4}){sub 10} series that was previously isolated from a high-temperature (750 deg. C) reaction employing the eutectic CsCl/KCl molten salt. The polycrystalline solid 1 was first prepared in a stoichiometric reaction via conventional solid-state method then followed by ion exchange giving rise to 2. Both compounds adopt three-dimensional structures that consist of orthogonally interconnected channels where electropositive ions reside. It has been demonstrated that the Cs{sub 9-x}K{sub x}Fe{sub 7}(PO{sub 4}){sub 10} series possesses versatile ion exchange capabilities with all the monovalent alkali metal and silver cations due to its facile pathways for ion transport. 1 and 2 were subject to electrochemical analysis and preliminary results suggest that the latter can be considered as an anode material. Electrochemical results indicate that Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10} is reduced below 1 V (vs. Li) to most likely form a Fe(0)/Li{sub 3}PO{sub 4} composite material, which can subsequently be cycled reversibly at relatively low potential. An initial capacity of 250 mAh/g was measured, which is equivalent to the insertion of thirteen Li atoms per Li{sub 9+x}Fe{sub 7}(PO{sub 4}){sub 10} (x = 13) during the charge/discharge process (Fe{sup 2+} + 2e {yields} Fe{sup 0}). Furthermore, 2 shows a lower reduction potential (0.9 V), by approximately 200 mV, and much better electrochemical reversibility than iron(III) phosphate, FePO{sub 4}, highlighting the value of improving the ionic conductivity of the sample.

36 MATERIALS SCIENCE↗

Growth of PbTe nanorods controlled by polymerized tellurium anions and metal(II) amides via composite-hydroxide-mediated approach

The pure face-centered-cubic PbTe nanorods have been synthesized by the composite-hydroxide-mediated approach using hydrazine as a reducing agent. The method is based on reaction among reactants in the melts of potassium hydroxide and sodium hydroxide eutectic at 170-220 deg. C and normal atmosphere without using any organic dispersant or surface-capping agent. Scanning electron microscopy, X-ray diffraction, transmission electron microscopy, and energy dispersive X-ray spectroscopy were used to characterize the structure, morphology and composition of the samples. The diameters of nanorods are almost fixed, while the lengths can be tunable under different growth time and temperatures. The growth mechanism of PbTe nanorods is investigated via UV-vis absorption, demonstrating that polymerized tellurium anions and metal(II) amides in the hydrazine hydroxide melts could control the crystallization and growth process of PbTe nanostructures. The band gap of as-synthesized PbTe nanorods has been calculated based on UV-vis-NIR optical diffuse reflectance spectra data.

36 MATERIALS SCIENCE↗

Thermodynamic assessment of lithium halide reciprocal salt systems for energy applications

Lithium halides are of interest because of their unique applications as fuel or coolants in molten salt reactors (MSRs) and electrolytes in thermally activated batteries. Because iodine is an important fission product for MSRs, the Molten Salt Thermal Properties Database-Thermochemical (MSTDB-TC) is being expanded to include relevant iodide reciprocal salt systems. In this work, we assess the thermochemical properties of lithium halide pseudobinary systems based on reported experimental phase diagrams, eutectic temperatures, and enthalpies of mixing. Within the framework of the modified quasi-chemical model in the quadruplet approximation (MQMQA), extrapolations to the related pseudoternary and pseudoquaternary systems have been performed. The pseudoquaternary representations of phase equilibria, enthalpy, entropy, and heat capacity are represented in the resultant models. Of interest for generating source terms for accident analysis is the ability to compute the vapor pressures of the dominant iodide species for the systems at any composition. Here, an example of such calculations is provided for the LiF-LiI system at x LiI = 0.01 and x LiI = 0.70, in this case indicating that the LiI vapor species are predominant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermophysical properties of FLiBe using moment tensor potentials

Fluoride salts are prospective materials for applications in some next-generation nuclear reactors and their thermophysical properties at various conditions are of interest. Experimental measurement of the properties of these salts is often difficult and, in some cases, unfeasible due to challenges from high temperatures, impurity control, and corrosivity. Therefore, accurate theoretical methods are needed for fluoride salt property prediction. In this work, we used moment tensor potentials (MTP) to approximate the potential energy surface of eutectic FLiBe (66.6% LiF – 33.3% BeF2) predicted by the ab initio (DFT-D3) method. Here, we then used the developed potential and molecular dynamics to obtain several thermophysical properties of FLiBe, including radial distribution functions, density, self-diffusion coefficients, thermal expansion, specific heat capacity, bulk modulus, viscosity, and thermal conductivity. Our results show that the MTP potential approximates the potential energy surface accurately and the overall approach yields very good agreement with experimental values. The converged fitting can be obtained with less than 600 configurations generated from DFT calculations, which data can be generated in just 1200 core hours on today's typical processors. The MTP potential is faster than many machine learning potentials and about one order of magnitude slower than widely used empirical molten salt potentials such as Tosi/Fumi.

36 MATERIALS SCIENCE↗