Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dissolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Long-term permeability evolution of shale seal rocks with argon and scCO 2

In this work, we conducted a suite of experiments to evaluate the long-term permeability evolution of shale rocks under constant effective stress, before, during, and after interaction with supercritical carbon dioxide (scCO 2 ). To do so, we measured the time-dependent evolution of argon permeabilities for the pre- and post-reacted samples (i.e., before and after long-term interaction with scCO 2 ). In addition, we obtained permeability evolution during long-term interaction with scCO 2 . The samples showed either relatively constant permeabilities or a moderate decrease during pre reaction long-term argon tests. The permeability evolution during long-term CO 2 tests showed continuous increase, continuous decrease, or cycles of increase/decrease in permeability. The long term response of the samples to CO 2 included phenomena such as 20 (i) salt precipitation, (ii) swelling-induced cracks, and (iii) carbonate dissolution. While it is obvious that salt precipitation and swelling-induced cracks decrease and increase the permeability, respectively, the sample response to carbonate dissolution proved to be more complex and may increase or decrease the permeability. The permeability evolution during post-reaction long-term argon injection is also affected by the contribution of each of these three phenomena, during long-term interaction with CO 2 . We observe increase, decrease, and constant permeability evolution during post-reaction argon tests. Our experiments reveal that the initial permeability of the samples plays a significant role on the long-term permeability response of shales in the presence argon and scCO 2 fluids. This study shows, when shales are hydraulically fractured with CO 2 , their initial permeability has a more significant role than their permeability evolution over time.

58 GEOSCIENCES↗

Facile solvothermal synthesis of graphene-MnOOH nanocomposites

In this paper, we report a facile solvothermal route capable of aligning MnOOH nanocrystals on graphene. X-ray diffraction (XRD) and transmission electron microscopy (TEM) observations indicate that the exfoliated graphene sheets are decorated randomly by MnOOH nanocrystals, forming well-dispersed graphene-MnOOH nanocomposites. Dissolution-crystallization and oriented attachment are speculated to be the vital mechanisms in the synthetic process. The attachment of additives, such as MnOOH nanoparticles, are found to be beneficial for the exfoliation of GO as well as preventing the restack of graphene sheets. Moreover, cyclic voltammetry (CV) analyses suggest that the electrochemical reversibility is improved by anchoring MnOOH on graphene. Notably, the as-fabricated nanocomposites reveal unusual catalytic performance for the thermal decomposition of ammonium perchlorate (AP) due to the concerted effects of graphene and MnOOH. This template-free method is easy to reproduce, and the process proceeds at a low temperature and can be readily extended to prepare other graphene-based nanocomposites. - Graphical abstract: Manganese oxyhydroxide nanocrystals have been successfully attached onto the graphene sheets via an oriented attachment and dissolution-crystallization process, forming a nanocomposite with unusual catalytic capabilities. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of A-site composition and oxygen nonstoichiometry on the thermodynamic stability of compounds in the Ba–Sr–Co–Fe–O system

The thermodynamic stability of the perovskite-type oxides in the Ba{sub x}Sr{sub 1−x}Co{sub 0.8}Fe{sub 0.2}O{sub 3−δ} (BSCF) system was investigated with varying Ba:Sr ratios (x=0.2, 0.4, 0.5, 0.6, 0.8) and correlated with the charge compensation mechanism and the change in the oxygen stoichiometry of the materials. Thermodynamic properties represented by the relative partial molar free energies, enthalpies and entropies of oxygen dissolution in the perovskite phase, as well as the equilibrium partial pressures of oxygen have been obtained in the temperature range of 823–1273 K using solid electrolyte electrochemical cells (EMF) method. The influence of the oxygen stoichiometry change on the thermodynamic properties was examined using a coulometric titration technique coupled with EMF measurements. The temperature dependence of enthalpy increment (H{sub T}−H{sub 298}) in the temperature range of 700–900 K was measured by drop calorimetry. The energetic parameters allow for the correlation of the structural and electrical stability with the defect structures. - Graphical abstract: Partial molar energy of oxygen dissolution (ΔG{sup ¯}{sub O{sub 2}}) (EMF measurements) and enthalpy increment (H{sub T}−H{sub 298}) (drop calorimetry data) of perovskite materials with the composition Ba{sub x}Sr{sub 1−x}Co{sub 0.8}Fe{sub 0.2}O{sub 3−δ} as a function of temperature and Barium content. Highlights: ► We report relevant data for thermodynamic stability of Ba{sub x}Sr{sub 1−x}Co{sub 1−y}Fe{sub y}O{sub 3−δ} compounds. ► Temperature of structural transformations is evidenced as a function of Ba content. ► Correlation between thermodynamic, electrical and structural data is investigated. ► The results are discussed based on the properties-defect structure relationship.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel reduction synthesis of the graphene/Mn{sub 3}O{sub 4} nanocomposite for supercapacitors

Graphene/Mn{sub 3}O{sub 4} nanocomposite is successfully synthesized from graphene oxide (GO)/MnO{sub 2} precursor using dilute hydrazine hydrate assisted hydrothermal reaction (DAH method). X-ray photoelectron spectroscopy (XPS) and Raman characterizations confirm the decrease of oxygen-containing functional groups of GO. The results indicate that GO have been reduced to graphene to a large degree to increase the electronic conductive channels. The morphology and the phase transformation of MnO{sub 2} can be ascribed to the “dissolution-recrystallization” mechanism. Such nanocomposite, as electrode material for supercapacitor, exhibits a high specific capacitance of 326.9 F g{sup −1}, almost 4 times that of GO/MnO{sub 2} precursor (81.3 F g{sup −1}). The good cycle stability of 94.6% capacitance retention after 1000 cycles, can be explained by the firm interfacial cohesion between graphene and Mn{sub 3}O{sub 4} nanoparticle. This soft chemical DAH process could be readily extended to the preparation of other classes of hybrids. - Graphical abstract: The phase transition can be explained by the “dissolution-recrystallization” model. The GO/MnO{sub 2} precursor is reduced into graphene/Mn{sub 3}O{sub 4} by the DAH process, and the electrochemical property is dramatically enhanced. - Highlights: • Graphene/Mn{sub 3}O{sub 4} nanocomposite is firstly synthesized successfully from GO/MnO{sub 2} precursor. • The phase transformation from MnO{sub 2} to Mn{sub 3}O{sub 4} has occurred. • The specific capacitance of the graphene/Mn{sub 3}O{sub 4} (326.9 F/g) is 4 times that of GO/MnO{sub 2} precursor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of corrosion phenomena of Zr-Ti-Cu-Al-Ni metallic glass by SEM and TEM

Corrosion phenomena are investigated for a Zr{sub 59}Ti{sub 3}Cu{sub 20}Al{sub 10}Ni{sub 8} metallic glass immersed in hydrofluoric acid (HF) in open-circuit conditions and by means of electron microscopies (SEM and TEM). Several morphologies develop on the corroded surface and especially large and deep pits. TEM study demonstrates that Cu-rich nanocrystals of 5-10 nm are formed inside the corrosion pits (on their walls) during the corrosion process. These nanocrystals are not only by-products of the corrosion process but they very likely play a role in the development of the corrosion pitting morphology. They could have a dual role: (i) protecting the capped areas against dissolution and (ii) speeding the dissolution of neighboring uncapped areas by the creation of local galvanic cells.

36 MATERIALS SCIENCE↗

Microtexture tracking of sub-boundary evolution during hot deformation of aluminium

The microstructure and microtexture evolution of the same 3 grains around a triple point has been followed during hot plane strain compression by electron backscattered diffraction (EBSD) up to a strain of 1.2. A large grained model alloy of Al-0.1 wt% Mn was deformed in the form of a split sample in channel die compression at 400 Degree-Sign C by 3 repeated cycles, each involving EBSD grain orientation mapping, hot deformation and quenching. Detailed substructure maps of 3 grains on an inner surface demonstrates that their dislocation substructure develops up to a strain of about 0.5 then stabilises at approximately constant size, disorientation distribution and boundary alignment. The results are consistent with the repolygonisation model of steady state sub-boundary creation and dissolution during hot deformation. - Highlights: Black-Right-Pointing-Pointer Same area around triple point in Al followed by EBSD during hot deformation. Black-Right-Pointing-Pointer Strains from 0 to 1.2 by intervals of about 0.4. Black-Right-Pointing-Pointer Sub-grain microstructure and microtexture stabilise after strains of about 0.5. Black-Right-Pointing-Pointer Results consistent with model of continuous creation and dissolution of sub-grains.

36 MATERIALS SCIENCE↗

Morphology-controlled LiFePO{sub 4} cathodes by a simple polyol reaction for Li-ion batteries

LiFePO{sub 4} cathodes with secondary nanorod structures and nano-plate morphologies were synthesized by varying the reaction time in a polyol refluxing process without the use of any characteristic structure directing agents. The X-ray diffraction studies indicate the highly crystalline nature of the prepared samples. Electron microscopy investigations revealed the morphology of the samples after 1 to 16 h polyol reaction to be secondary nanorod bundles whereas the olivine sample recovered after 32 h polyol reaction displayed nano-plate morphology. The dimensions of the obtained samples varied from a few tens to a few hundred nanometers. When employed in a lithium test cell, the LiFePO{sub 4} cathodes reacted for 1, 4, 8, 16 and 32 h delivered discharge capacities of 161, 162, 171, 143 and 155 mAhg{sup −1}, respectively, with a well-defined plateau at 3.4 V and impressive capacity retentions until 50 cycles. Interestingly, among the prepared electrodes, the LiFePO{sub 4} nanorod bundle cathode prepared under 1 h reaction time maintained the highest average reversible capacities of 123 and 103 mAhg{sup −1} at C-rates as high as 3.2 and 6.4 C. The crystal growth mechanism during the polyol refluxing method can be explained by the stages of precursor dissolution and nucleation, oriented crystal growth and alignment by self-assembly, aggregation and partial dissolution and complete re-crystallization. - Highlights: • Study of LiFePO{sub 4} crystal formation by tuning reaction times in a simple polyol process • Nano-structured LiFePO{sub 4} is formed by varying reaction times in a simple polyol process. • Self-assembled secondary LiFePO{sub 4} nanorod bundles are obtained under 1 h reaction time. • Secondary structures are formed via a template-free self-assembly process. • The olivine nanorod bundle cathode demonstrated enhanced electrochemical properties.

36 MATERIALS SCIENCE↗

Effect of oxygen on weld shape and crystallographic orientation of duplex stainless steel weld using advanced A-TIG (AA-TIG) welding method

The double-shielded advanced A-TIG (AA-TIG) welding method was adopted in this study for the welding of the SUS329J4L duplex stainless steel with the shielding gases of different oxygen content levels. The oxygen content in the shielding gas was controlled by altering the oxygen content in the outer layer gas, while the inner layer remained pure argon to suppress oxidation on the tungsten electrode. As a result, a deep weld penetration was obtained due to the dissolution of oxygen into the weld metals. Additionally, the microstructure of the weld metal was changed by the dissolution of oxygen. The austenite phase at the ferrite grain boundary followed a Kurdjumov–Sachs (K–S) orientation relationship with the ferrite matrix phase at any oxide content. On the other hand, the orientation relationship between the intragranular austenite phase and the ferrite matrix phase exhibited different patterns under different oxygen content levels. When there was little oxide in the fusion zone, only a limited part of the intragranular austenite phase and the ferrite matrix phase followed the K–S orientation relationship. With the increase of the oxide, the correspondence of the K–S relationship increased and fit very well in the 2.5% O{sub 2} shielded sample. The investigation of this phenomenon was carried out along with the nucleation mechanisms of the intragranular austenite phases. - Highlights: • Weld penetration increased with the increase of the oxygen content. • Average diameter and number density of oxide were changed by the oxygen content. • K-S relationship of Widmanstätten austenite/ferrite wasn’t varied by oxide. • Orientation relationship of intragranular austenite/ferrite was varied by oxide.

36 MATERIALS SCIENCE↗

Grain refinement of a nickel and manganese free austenitic stainless steel produced by pressurized solution nitriding

Prolonged exposure at high temperatures during solution nitriding induces grain coarsening which deteriorates the mechanical properties of high nitrogen austenitic stainless steels. In this study, grain refinement of nickel and manganese free Fe–22.75Cr–2.42Mo–1.17N high nitrogen austenitic stainless steel plates was investigated via a two-stage heat treatment procedure. Initially, the coarse-grained austenitic stainless steel samples were subjected to an isothermal heating at 700 °C to be decomposed into the ferrite + Cr{sub 2}N eutectoid structure and then re-austenitized at 1200 °C followed by water quenching. Microstructure and hardness of samples were characterized using X-ray diffraction, optical and scanning electron microscopy, and micro-hardness testing. The results showed that the as-solution-nitrided steel decomposes non-uniformly to the colonies of ferrite and Cr{sub 2}N nitrides with strip like morphology after isothermal heat treatment at 700 °C. Additionally, the complete dissolution of the Cr{sub 2}N precipitates located in the sample edges during re-austenitizing requires longer times than 1 h. In order to avoid this problem an intermediate nitrogen homogenizing heat treatment cycle at 1200 °C for 10 h was applied before grain refinement process. As a result, the initial austenite was uniformly decomposed during the first stage, and a fine grained austenitic structure with average grain size of about 20 μm was successfully obtained by re-austenitizing for 10 min. - Highlights: • Successful grain refinement of Fe–22.75Cr–2.42Mo–1.17N steel by heat treatment • Using the γ → α + Cr{sub 2}N reaction for grain refinement of a Ni and Mn free HNASS • Obtaining a single phase austenitic structure with average grain size of ∼ 20 μm • Incomplete dissolution of Cr{sub 2}N during re-austenitizing at 1200 °C for long times • Reducing re-austenitizing time by homogenizing treatment before grain refinement.

36 MATERIALS SCIENCE↗

First stage of reaction of molten Al with MgO substrate

The Al/MgO couple was produced in vacuum (~ 5 × 10{sup −} {sup 4} Pa) by contact heating from RT up to 1000 °C and holding at that temperature for 1 h of a small 4 × 4 × 4 mm aluminium (5 N) sample placed on the [100] MgO single crystal substrate. TEM observations backed with electron diffraction analysis indicated that the interaction between liquid aluminium and MgO starts from a redox reaction producing a continuous layer of MgAl{sub 2}O{sub 4} spinel on the substrate surface. Its growth is controlled by solid state out-diffusion of magnesium and oxygen towards the surface being in contact with liquid metal. The thickening of spinel layer is accompanied by its cracking and infiltration with aluminium. The above process enables local dissolution of the MgO substrate and formation in it of a thin region of interpenetrating metallic channels walled with spinel. The removal of dissolved magnesium through open aluminium channels towards the drop and to vacuum locally produces areas of aluminium enriched with dissolved oxygen, which results in the nucleation of α-Al{sub 2}O{sub 3} at spinel clad walls. The growth of α-Al{sub 2}O{sub 3} is controlled only by the dissolution rate of MgO by aluminium, liquid state diffusion of Mg to drop/vacuum and oxygen to the front of the of α-Al{sub 2}O{sub 3} crystallites growing into MgO substrate. - Highlights: • New unique evidence of first stages of interaction of liquid Al with MgO substrates • Interaction of liquid Al with MgO starts with the formation of a layer MgAl{sub 2}O{sub 4}. • Growth of MgAl{sub 2}O{sub 4} is slow as controlled by solid state out-diffusion of Mg and O. • MgAl{sub 2}O{sub 4} serves as a nucleation site for Al{sub 2}O{sub 3} and consumed by it soon after. • Growth of Al{sub 2}O{sub 3} is fast as controlled by diffusion in liquid state.

36 MATERIALS SCIENCE↗

Multi-scale and multi-technic microstructure analysis of a linear friction weld of the metastable-β titanium alloy Ti-5Al-2Sn-2Zr-4Mo-4Cr (Ti17) towards a new Post-Weld Heat Treatment

Highlights: • Soft joint showing sharp macro-zones and marked by asymmetrical process effects • Gradient of thermomechanical loads identified through progressive stages of transformation • Highly textured recrystallized β grains at the joint core with distorted β lattice • Lattices, phase fractions, microstructures and hardness homogenized after heat treatment - Abstract: Linear Friction Welding (LFW) is a solid-state joining process producing narrow joints mainly developed for the aircraft industry. The Thermo-Mechanical Processing (TMP) loads imposed on the material cause complex microstructure transformations. This study aimed at characterizing the local microstructures and crystallographic configurations to identify the mechanisms impacting the stability and the mechanical properties of a Ti17 LFW joint with the objective of establishing an innovative homogenizing Post-Weld Heat Treatment (PWHT). The process caused a narrow zone of ±2 mm from the friction interface to reach the isothermal α → β transformation temperature under a heating rate of 500 K/s followed by quenching (−100 K/s). The TMP resulted in the formation a ±3 mm wide soft Process Affected Zone (PAZ) delimited by three characteristic zones: the Welding Line (WL width ≈ 400 μm), The Thermo-Mechanically Affected Zone (TMAZ width ≈ 1 mm) and the Heat Affected Zone (HAZ). β TMP resulted in the total dissolution of the α phase in the joint core (WL + TMAZ) and formed strongly textured {110}<111> β recrystallized grains in the WL by continuous dynamic recrystallization of squeezed prior-β grains in the TMAZ. α + β TMP led to a gradual loss of hardness in the HAZ whose microstructure is similar to the one of the base material (BM) but is subject to gradual α laths dissolution due to the local temperatures experienced during LFW. A PWHT consisting in a β annealing followed by an α + β ageing resulted in a uniformly hardened weld with a homogenized Widmanstätten microstructure in the whole assembly.

36 MATERIALS SCIENCE↗

Catastrophic oxidation mechanism of hyper duplex stainless steel S32707 at high temperature in air

Highlights: • High temperature oxidation behavior and mechanism of S32707 were investigated in air. • MoO{sub 3}, molten molybdate and precipitate jointly cause catastrophic oxidation at 900 °C. • Air-nitriding plays an important role in accelerating oxidation at 1000 and 1100 °C. • Synergism of MoO{sub 3}, molten molybdate and nitriding promotes catastrophic oxidation. • Disappearance of MoO{sub 3}, molybdate and nitriding enhances oxidation resistance at 1200 °C. - Abstract: High-temperature oxidation behavior and the mechanism of hyper duplex stainless steel S32707 were investigated at 900, 1000, 1100 and 1200 °C in air. Some interesting oxidation characteristics were observed, and the corresponding oxidation mechanisms were proposed. At 900 °C, oxidation follows a linear rate law. The combined actions of MoO{sub 3} volatilization, molten molybdate dissolution reaction and block-like σ phase and Cr{sub 2}N precipitation cause catastrophic oxidation. When the temperature is raised to 1000 and 1100 °C, the deleterious effects of MoO{sub 3} and molten molybdates are greatly enhanced. Moreover, undesirable air-nitriding occurs and further accelerates the oxidation. The synergistic effects of MoO{sub 3} volatilization, molten molybdate dissolution reaction and air-nitriding strongly promote catastrophic oxidation. Surprisingly, the oxidation at 1200 °C follows a near-parabolic rate law. The disappearances of MoO{sub 3}, molten molybdates and air-nitriding lead to the formation of a rather compact, complete and protective oxide layer. The oxidation resistance of the steel has been clearly improved.

36 MATERIALS SCIENCE↗

In-situ observation of nano-oxide and defect evolution in 14YWT alloys

Nanostructured ferritic alloys (NFAs) are considered as candidates for structural components in advanced nuclear reactors due to their excellent radiation resistance as a result of a high density of nano-oxides (NOs) in the microstructure. Therefore, gaining an understanding on the stability of NOs under irradiation is crucial. In this study, we have investigated the evolution of defects and NOs in 14YWT NFAs under in-situ Kr ion irradiation at room temperature (RT) and 450°C up to 10 dpa. It has been found that irradiations at 450°C do not create any changes in the NOs, similar to the bulk irradiations. On the other hand, elemental mapping indicates that NOs dissolve mostly after 10 dpa irradiations at RT. Thus, while defects are both annihilated and pinned by NOs at low doses (before the dissolution of NOs), glissile loops start to escape to the foil surface at high doses (after the dissolution of NOs), justifying the significantly low fraction of (111) loops compared to the literature values. Furthermore, high resolution transmission electron microscopy analysis has shown that the NOs are mostly coherent Y 2 Ti 2 O 7 particles with pyrochlore crystal structure after both RT and 450°C irradiations, similar to those observed before irradiation.

36 MATERIALS SCIENCE↗

CdSe@ZnS nanocomposites prepared by a mechanochemical route: No release of Cd{sup 2+} ions and negligible in vitro cytotoxicity

Graphical abstract: - Highlights: • CdSe@ZnS nanocomposites were produced by milling. • Negligible cadmium leakage was observed. • No toxicity against living cells was documented. • The material is suitable for biological imaging. - Abstract: CdSe@ZnS nanocomposites have been prepared by a two-step solid state mechanochemical synthesis. CdSe prepared from Cd and Se elements in the first step was mixed with zinc acetate and sodium sulphide in the second step of milling to prepare a CdSe@ZnS nanocomposite. In the third step, the obtained nanocomposite was coated with L-cysteine to prepare a biocompatible system. The crystallite size of the new type of nanocomposite was 20–35 nm for cubic CdSe and 3–8 nm for hexagonal ZnS as calculated from XRD, TEM and SEM data. The synthesised samples show good crystallinity and have been tested for dissolution and cytotoxicity. The dissolution of cadmium from CdSe@ZnS was less than 0.05 μg mL{sup −1}, whereas a value of 0.8 μg mL{sup −1} was measured for CdSe alone. The binding of ZnS with CdSe in the nanocomposite practically eliminated the release of cadmium into solution. As a consequence, a very low cytotoxic activity has been evidenced for CdSe@ZnS. The nanocomposites coated with L-cysteine have a great potential as fluorescent labels in biomedical engineering.

36 MATERIALS SCIENCE↗

Structural, chemical and optical evaluation of Cu-doped ZnO nanoparticles synthesized by an aqueous solution method

Highlights: • Cu-doped ZnO nanoparticles obtained by chemical synthesis. • Substitutional or interstitial Cu into ZnO lead specific structural, chemical, and optical changes. • Incorporation efficiency of Cu atoms in ZnO as a function of the Cu concentration in the precursor dissolution. - Abstract: In this work a study of ZnO and Cu-doped ZnO nanoparticles obtained by chemical synthesis in aqueous media was carried out. Structural analysis gave the dominant presence of wurtzite ZnO phase forming a solid solution Zn{sub 1−x}Cu{sub x}O. For high Cu doping CuO phase is also present. For low Cu concentration the lattice shrinks due to Cu atoms substitute Zn atoms. For high Cu concentration the lattice enlarges due to predominance of interstitial Cu. From elemental analysis we determined and analyzed the incorporation efficiency of Cu atoms in Zn{sub 1−x}Cu{sub x}O as a function of the Cu concentration in the precursor dissolution. Combining structural and chemical results we described the Cu/Zn precursor concentrations r{sub w} in which the solid solution of Cu in ZnO is predominant. In the region located at r{sub w} ≈ 0.2–0.3 it is no longer valid. For Cu/Zn precursor concentration r{sub w} > 0.3 interstitial Cu dominates, and some amount of copper oxide appears. As the Cu concentration increases, the effective size of nanoparticles decreases. Photoluminescence (PL) measurements of the Cu-doped ZnO nanoparticles were carried out and analyzed.

36 MATERIALS SCIENCE↗

Synthesis of polycrystalline Co{sub 3}O{sub 4} nanowires with excellent ammonium perchlorate catalytic decomposition property

Graphical abstract: Co{sub 3}O{sub 4} nanowires with excellent ammonium perchlorate catalytic decomposition property were synthesized via a methanamide-assisted hydrolysis and subsequent dissolution–recrystallization process in the presence of methanamide. - Abstract: Co{sub 3}O{sub 4} nanowires, with the length of tens of micrometers and the width of several hundred nanometers, were produced by a hydrothermal treatment and a post-anneal process. X-ray diffraction (XRD) result showed that the Co{sub 3}O{sub 4} nanowires belong to cubic crystal system. Scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) analysis indicated that the Co{sub 3}O{sub 4} nanowires, composed by single crystalline nanoparticles, were of polycrystalline nature. On the basis of time-dependent experiments, methanamide-assisted hydrolysis and subsequent dissolution–recrystallization process were used to explain the precursors' formation process of the polycrystalline Co{sub 3}O{sub 4} nanowires. The TGA experiments showed that the as-obtained Co{sub 3}O{sub 4} nanowires can catalyze the thermal decomposition of ammonium perchlorate (AP) effectively.

36 MATERIALS SCIENCE↗

Multiphase flow and multicomponent reactive transport model of the ventilation experiment in Opalinus clay

During the construction and operational phases of a high-level radioactive waste (HLW) repository constructed in a clay formation, ventilation of underground drifts will cause desaturation and oxidation of the rock. The Ventilation Experiment (VE) was performed in a 1.3 m diameter unlined horizontal microtunnel on Opalinus clay at Mont Terri underground research laboratory in Switzerland to evaluate the impact of desaturation on rock properties. A multiphase flow and reactive transport model of VE is presented here. The model accounts for liquid, vapor and air flow, evaporation/condensation and multicomponent reactive solute transport with kinetic dissolution of pyrite and siderite and local-equilibrium dissolution/precipitation of calcite, ferrihydrite, dolomite, gypsum and quartz. Model results reproduce measured vapor flow, liquid pressure and hydrochemical data and capture the trends of measured relative humidities, although such data are slightly overestimated near the rock interface due to uncertainties in the turbulence factor. Rock desaturation allows oxygen to diffuse into the rock and triggers pyrite oxidation, dissolution of calcite and siderite, precipitation of ferrihydrite, dolomite and gypsum and cation exchange. pH in the unsaturated rock varies from 7.8 to 8 and is buffered by calcite. Computed changes in the porosity and the permeability of Opalinus clay in the unsaturated zone caused by oxidation and mineral dissolution/precipitation are smaller than 5%. Therefore, rock properties are not expected to be affected significantly by ventilation of underground drifts during construction and operational phases of a HLW repository in clay.

54 ENVIRONMENTAL SCIENCES↗