Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Formation, history and energetics of cores in the terrestrial planets

The size, evolution and energetics of the earth's core and the probable central, metalic cores of Mercury, Venus, the moon and Mars are discussed. The cores of Mercury, Mars and the earth are considered likely to decrease in relative mass and volume with distance from the sun; the moon does not fit this sequence and data from Venus are insufficient. Core formation is concluded to have occurred early (prior to four billion years ago) on the earth and Mercury, while that on the moon would have occurred over a longer interval and the core of Mars would have formed much later. Of the possible energy sources in planetary cores able to maintain a molten state and drive magnetic dynamos, the energy of core formation was probably spent too early in planetary history to provide much present power, and the energy gained from freezing an inner core in the earth and Mercury are considered at best marginally able to match conductive heat loss. Future measurements proposed to improve the quantitative understanding of core properties include a better documentation of the magnetic fields of Venus and Mars and the seismometry of Mars.

Solomon, S. C.↗

The phase of the ten-hour modulation in the Jovian magnetosphere /Pioneers 10 and 11/

The paper describes the study of the phase of the 10-hour modulation of energetic electrons seen by Pioneers 10 and 11 in the Jovian magnetosphere. Attention is given to the peaks rather than the valleys of each cycle because the peaks are where physically interesting features occur, such as particle acceleration, current sheets, etc. To identify the peaks, it is required that the instantaneous intensity be higher than the 5-hour running average and the 5-hour running average be greater than the 10-hour running average. These criteria select an interval rather than a point and it is determined that this interval is an appropriate estimate of the experimental uncertainty. When the phases of the peaks are plotted together, they create patterns which are discussed in terms of disk-like, clock-like, and rotating anomaly models of the magnetosphere. Each model fits some of the data, but no model explains all of the data convincingly. It is concluded that there is still no understanding of the configuration of the outer Jovian magnetosphere.

Fillius, W.↗

On the method of least squares

A method for fitting models to observed data by least squares when the data appear nonlinearly in the equations of condition, where there are nonlinear constraints among model parameters, and where the observations may be correlated, is described. The method is independent of the form in which the equations of condition are expressed, and is a generalization of the classical technique. The method is nearly as simple to apply in practice as the classical method of least squares.

Jefferys, W. H.↗

Observations of interstellar helium with a gas absorption cell - Implications for the structure of the local interstellar medium

A photometer sensitive at the 584 A line of He 1, incorporating a helium gas resonance absorption cell, was flown on the Apollo-Soyuz Test Project in July 1975. The instrument observed much of the night-time sky, and returned 42 min of usable data. The data were analyzed by fitting to a model of resonant scattering of solar 584 A flux from nearby interstellar helium. Good model fits were obtained for an interstellar gas bulk velocity vector pointing toward alpha = 72 deg, delta = +15 deg, with speed 20 km/s, with interstellar medium temperatures from 5000 to 20,000 K and with neutral interstellar helium density (8.9 plus or minus 10 to the -3rd/cu cm). In the context of theoretical studies of the interstellar medium by McKee and Ostriker (1977), the results may indicate that the sun lies in the warm, partially ionized periphery of a cold interstellar cloud, surrounded by a high-temperature gas heated by old supernova remnants.

Freeman, J.↗

Azimuthal magnetic field at Jupiter

The azimuthal component of the magnetic field at Jupiter is modeled. A current distribution which is the sum of two currents, one flowing along the magnetic field lines and another injected into the current sheet at r(0) (about 10 Jupiter radii). Two cases are examined, one in which current flows along the field lines into the equatorial plane and then radially outward and a second case in which the only current is that injected into the current sheet at r(0). Each of these two cases results in an azimuthal magnetic field which fits the magnetic field data.

Parish, J. L.↗

The ultraviolet spectrum of the magnetic degenerate star GD229

The ultraviolet spectrum obtained with the IUE satellite of the magnetic degenerate white dwarf star GD 229 is presented. The ultraviolet energy distribution measured by the short- and long-wavelength cameras covering the range 1170-3200 A, when combined with optical data, indicates a best fit blackbody temperature of 16,000 K, which is significantly lower than previous estimates. A broad absorption trough in the 2000-3000 A region is observed which may be produced by opacity in the fundamental cyclotron frequency for surface magnetic fields from 3.2 to 5 x 10 to the 8th gauss. The absence of a strong Lyman-alpha sigma + component suggests that the primary atmospheric constituent is not hydrogen, with various absorption features probably attributable to Zeeman components of neutral helium, or possibly Mg II, C II and other metal lines. The superposition of many strong Zeeman features is also an alternative interpretation of the absorption in the 2000-3000 A interval.

Green, R. F.↗

Io's sodium emission cloud and the Voyager 1 encounter

Monitoring of Io's neutral sodium emission cloud, monitored from two earth observatories during the period of the Voyager 1 encounter, demonstrated that the behavior of the cloud is complex; displaying a variety of changes, both systematic and secular, which can have both time and spatial dependencies while also possessing some characteristics of stability. Dynamic models of the sodium cloud employing Voyager 1 plasma data provide a reasonable fit to the encounter images of one of the observatories. The modeling assumptions of anisotropic ejection of neutral sodium atoms from the leading, inner hemisphere of Io, with a velocity distribution characteristic of sputtering, adequately explain the overall intensity distribution of the 'near cloud'.

Goldberg, B. A.↗

The altitude distribution of the Venus ultraviolet nightglow and implications on vertical transport

The altitude distribution of the nitric oxide nightglow was measured with an ultraviolet spectrometer on board Pioneer Venus, in order to study the effects of the distribution on the Venus nightside lower thermosphere transport properties. Limb profiles were obtained with an 8 ms integration period on several orbits near periapsis. The observations were made between P minus 2 min and P plus 4 min, where altitude ranges between 150 and 350 km, and latitude varies from 24 degrees N to 9 degrees S. A method independent of the spacecraft attitude data was used to fit the observed limb profiles, and to find the altitude of the maximum of the layer (115 plus or minus 2 km), and the topside scale height (about 3 km). It is shown that downward transport by diffusion alone is not sufficient, and if vertical motion is parameterized by eddy diffusion, an eddy diffusion coefficient is deduced from the altitude of the layer.

Gerard, J. C.↗

A model of the human observer and decision maker

The decision process is described in terms of classical sequential decision theory by considering the hypothesis that an abnormal condition has occurred by means of a generalized likelihood ratio test. For this, a sufficient statistic is provided by the innovation sequence which is the result of the perception an information processing submodel of the human observer. On the basis of only two model parameters, the model predicts the decision speed/accuracy trade-off and various attentional characteristics. A preliminary test of the model for single variable failure detection tasks resulted in a very good fit of the experimental data. In a formal validation program, a variety of multivariable failure detection tasks was investigated and the predictive capability of the model was demonstrated.

Wewerinke, P. H.↗

Indentation law for composite laminates

Static indentation tests are described for glass/epoxy and graphite/epoxy composite laminates with steel balls as the indentor. Beam specimens clamped at various spans were used for the tests. Loading, unloading, and reloading data were obtained and fitted into power laws. Results show that: (1) contact behavior is not appreciably affected by the span; (2) loading and reloading curves seem to follow the 1.5 power law; and (3) unloading curves are described quite well by a 2.5 power law. In addition, values were determined for the critical indentation, alpha sub cr which can be used to predict permanent indentations in unloading. Since alpha sub cr only depends on composite material properties, only the loading and an unloading curve are needed to establish the complete loading-unloading-reloading behavior.

Yang, S. H.↗

As-built design specification for PARHIS

The program is part of the CLASFYG package. It produces histograms of the greeness profile derived parameters alpha, beta, t sub o, and chi squared, which are computed by the CLASFYG program. Alpha is the approximate greeness rise time, beta is the approximate greeness decay time, t sub o is the spectral crop emergence date, and chi squared per degree of freedom is the goodness of fit of the actual data to the computed greeness profile. The program also produces statistical information concerning the parameters.

Tompkins, M. A.↗

The impact of distributed computing on education

In this paper, developments in digital computer technology since the early Fifties are reviewed briefly, and the parallelism which exists between these developments and developments in analysis and design procedures of structural engineering is identified. The recent trends in digital computer technology are examined in order to establish the fact that distributed processing is now an accepted philosophy for further developments. The impact of this on the analysis and design practices of structural engineering is assessed by first examining these practices from a data processing standpoint to identify the key operations and data bases, and then fitting them to the characteristics of distributed processing. The merits and drawbacks of the present philosophy in educating structural engineers are discussed and projections are made for the industry-academia relations in the distributed processing environment of structural analysis and design. An ongoing experiment of distributed computing in a university environment is described.

Utku, S.↗

On the coronae of rapidly rotating stars. III - An improved coronal rotation-activity relation in late type dwarfs

While it has previously been claimed that X-ray luminosity, or surface flux, varies as a power of the rotational velocity in G dwarfs, it is demonstrated that a single power law does not provide an acceptable fit to all the data. The data are describable by a power law, with a break in slope near a 12-day period which occurs at the same rotational period as the bifurcation in Vaughan and Preston's (1980) chromospheric study of G dwarfs. It is speculated that the two breaks are both related and due to a change in the stellar dynamo mode, which, at a rotation period of 12 days, corresponds to an age of one billion years for single G dwarfs.

Walter, F. M.↗

Determining Normal-Distribution Tolerance Bounds Graphically

Graphical method requires calculations and table lookup. Distribution established from only three points: mean upper and lower confidence bounds and lower confidence bound of standard deviation. Method requires only few calculations with simple equations. Graphical procedure establishes best-fit line for measured data and bounds for selected confidence level and any distribution percentile.

Mezzacappa, M. A.↗

Automated segment matching algorithm-theory, test, and evaluation

Results to automate the U.S. Department of Agriculture's process of segment shifting and obtain results within one-half pixel accuracy are presented. Given an initial registration, the digitized segment is shifted until a more precise fit to the LANDSAT data is found. The algorithm automates the shifting process and performs certain tests for matching and accepting the computed shift numbers. Results indicate the algorithm can obtain results within one-half pixel accuracy.

Kalcic, M. T.↗

Estimating proportions of materials using mixture models

An approach to proportion estimation based on the notion of a mixture model, appropriate parametric forms for a mixture model that appears to fit observed remotely sensed data, methods for estimating the parameters in these models, methods for labelling proportion determination from the mixture model, and methods which use the mixture model estimates as auxiliary variable values in some proportion estimation schemes are addressed.

Heydorn, R. P.↗

The line continuum luminosity ratio in AGN: Or on the Baldwin Effect

The luminosity dependence of the equivalent width of CIV in active galaxies, the "Baldwin" effect, is shown to be a consequence of a luminosity dependent ionization parameter. This law also agrees with the lack of a "Baldwin" effect in Ly alpha or other hydrogen lines. A fit to the available data gives a weak indication that the mean covering factor decreases with increasing luminosity, consistent with the inference from X-ray observations. The effects of continuum shape and density on various line ratios of interest are discussed.

Mushotzky, R.↗

The three micron 'ice' band in grain mantles

Attention is given to the influence of different mantle constituents on extinction and polarization due to H2O absorption in grain mantles, particularly the 3250/cm band. With respect to BN, the simultaneous reproduction of the extinction and polarization band shapes occurs by normal size particles containing mixtures of H2O with other molecules. As regards the 3-micron absorption in OH 231.8 plus 4.2, the data can be best fitted with pure amorphous H2O grains which have been heated to (or created at) about 80 K. The variation in grain mantle composition between young stellar objects and late-type stars loosing mass is attributed to a fundamental difference in grain formation and evolution.

Hagen, W.↗