Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Intensive Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Effect of α-Tocopherol on the Microscopic Dynamics of Dimyristoylphosphatidylcholine Membrane

Vitamin E behaves as an antioxidant and is well known for its protective properties of the lipid membrane. The most biologically active form of vitamin E in the human organism is α-tocopherol (aToc). Recently (Marquardt, D.; et al. J. Am. Chem. Soc. 2014, 136, 203₋210) it has been shown that aToc resides near the center of dimyristoylphosphatidylcholine (DMPC) bilayer, which is in stark contrast with other PC membranes, where aToc is located near the lipid₋water interface. Here we report an unusual effect of this exceptional location of aToc on the dynamical behavior of DMPC membrane probed by incoherent elastic and quasielastic neutron scattering. For pure DMPC vesicles, elastic scan data show two step-like drops in the elastic intensity at 288 and 297 K, which correspond to the pre- and main phase transitions, respectively. However, inclusion of aToc into DMPC membrane inhibits the step-like elastic intensity drops, indicating a significant impact of aToc on the phase behavior of the membrane. This observation is supported by our differential scanning calorimetry data, which shows that inclusion of aToc leads to a significant broadening of the main phase transition peak, whereas the peak corresponding to the pretransition disappears. We have performed quasielastic neutron scattering (QENS) measurements on DMPC vesicles with various concentrations of aToc at 280, 293, and 310 K. We have found that aToc affects both the lateral diffusion and the internal motions of the lipid molecules. Below the main phase transition temperature inclusion of aToc accelerates both the lateral and the internal lipid motions. On the other hand, above the main phase transition temperature the addition of aToc restricts only the internal motion, without a significant influence on the lateral motion. To conclude, our results support the finding that the location of aToc in DMPC membrane is deep within the bilayer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advances in Time Resolved X-ray Excited Optical Luminescence Instrumentation at the Canadian Light Source

Measurement of the optical emission properties of samples excited by x-rays can be used to study defect states in crystals and the optical properties of nanostructured materials. Changes in the intensities, wavelengths and lifetimes of the optical emission can occur when specific core level electrons are excited using tuneable light from a synchrotron light source. At the Canadian Light Source (CLS), collaboration between the user community, the experimental facilities group and the accelerator division has resulted in improved capabilities in the acquisition of Time Resolved XEOL (TRXEOL) data. Using a streak camera, the optical luminescence decay curves from samples excited with 35 ps long synchrotron pulses have been obtained. The streak tube is operated in single sweep mode and is triggered by the 500 MHz RF signal, which has been resynchronized to the orbit clock frequency giving a highly stable trigger pulse. A transverse kicker system is used to improve bunch purity from 10{sup 2} to 10{sup 6}. The decay curves of the XEOL of nanostructured ZnO and a high pressure form of SiO{sub 2} have been measured and demonstrate the unique capabilities of this instrumentation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Enhanced optical properties due to indium incorporation in zinc oxide nanowires

Indium-doped zinc oxide nanowires grown by vapor-liquid-solid technique with 1.6 at. % indium content show intense room temperature photoluminescence (PL) that is red shifted to 20 meV from band edge. We report on a combination of nanowires and nanobelts-like structures with enhanced optical properties after indium doping. The near band edge emission shift gives an estimate for the carrier density as high as 5.5 × 10{sup 19 }cm{sup −3} for doped nanowires according to Mott's critical density theory. Quenching of the visible green peak is seen for doped nanostructures indicating lesser oxygen vacancies and improved quality. PL and transmission electron microscopy measurements confirm indium doping into the ZnO lattice, whereas temperature dependent PL data give an estimation of the donor and acceptor binding energies that agrees well with indium doped nanowires. This provides a non-destructive technique to estimate doping for 1D structures as compared to the traditional FET approach. Furthermore, these indium doped nanowires can be a potential candidate for transparent conducting oxides applications and spintronic devices with controlled growth mechanism.

36 MATERIALS SCIENCE↗

Enhanced light–matter interaction of aligned armchair graphene nanoribbons using arrays of plasmonic nanoantennas

We couple photoluminescent semiconducting 7-atom wide armchair edge graphene nanoribbons to plasmonic nanoantenna arrays and demonstrate an enhancement of the photoluminescence and Raman scattering intensity of the nanoribbons by more than an order of magnitude averaged over large areas, and by three orders of magnitude in the hot spots of plasmonic antennas. The increase in signal allows us to study Raman spectra with high signal-to-noise ratio. Using plasmonic enhancement we are able to detect the off-resonant Raman scattering from the modified radial breathing-like mode (RBLM) due to physisorbed molecules, the 3rd order RBLM, and C-H vibrations. We find excellent agreement between experimental data and simulations describing the spectral dependence of the enhancement and modifications of the polarization anisotropy. The strong field gradients in the optical near-field further allow us to probe the subwavelength coherence properties of the phonon modes in the nanoribbons. We theoretically model this considering a finite phonon correlation length along the GNR direction. Our results allow estimating the correlation length in graphene nanoribbons.

36 MATERIALS SCIENCE↗

AI-based design of a nuclear reactor core

The authors developed an artificial intelligence (AI)-based algorithm for the design and optimization of a nuclear reactor core based on a flexible geometry and demonstrated a 3× improvement in the selected performance metric: temperature peaking factor. The rapid development of advanced, and specifically, additive manufacturing (3-D printing) and its introduction into advanced nuclear core design through the Transformational Challenge Reactor program have presented the opportunity to explore the arbitrary geometry design of nuclear-heated structures. The primary challenge is that the arbitrary geometry design space is vast and requires the computational evaluation of many candidate designs, and the multiphysics simulation of nuclear systems is very time-intensive. Therefore, the authors developed a machine learning-based multiphysics emulator and evaluated thousands of candidate geometries on Summit, Oak Ridge National Laboratory’s leadership class supercomputer. The results presented in this work demonstrate temperature distribution smoothing in a nuclear reactor core through the manipulation of the geometry, which is traditionally achieved in light water reactors through variable assembly loading in the axial direction and fuel shuffling during refueling in the radial direction. The conclusions discuss the future implications for nuclear systems design with arbitrary geometry and the potential for AI-based autonomous design algorithms.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Coccidioidomycosis Dynamics in Relation to Climate in the Southwestern United States: Cocci. and climate in the SW U.S.

Valley fever is endemic to the southwestern United States. Humans contract this fungal disease by inhaling spores of Coccidioides spp. Changes in the environment can influence the abundance and dispersal of Coccidioides spp., causing fluctuations in valley fever incidence. We combined county-level case records from state health agencies to create a regional valley fever database for the southwestern United States, including Arizona, California, Nevada, New Mexico, and Utah. We used this data set to explore how environmental factors influenced the spatial pattern and temporal dynamics of valley fever incidence during 2000–2015. We compiled climate and environmental geospatial data sets from multiple sources to compare with valley fever incidence. These variables included air temperature, precipitation, soil moisture, surface dust concentration, normalized difference vegetation index, and cropland area. We found that valley fever incidence was greater in areas with warmer air temperatures and drier soils. The mean annual cycle of incidence varied throughout the southwestern United States and peaked following periods of low precipitation and soil moisture. From year-to-year, however, autumn incidence was higher following cooler, wetter, and productive springs in the San Joaquin Valley of California. In southcentral Arizona, incidence increased significantly through time. By 2015, incidence in this region was more than double the rate in the San Joaquin Valley. Our analysis provides a framework for interpreting the influence of climate change on valley fever incidence dynamics. Our results may allow the U.S. Centers for Disease Control and Prevention to improve their estimates of the spatial pattern and intensity of valley fever endemicity.

54 ENVIRONMENTAL SCIENCES↗

Equation of state and strain-induced stabilization of δ-phase stabilized plutonium alloys

An in-situ high-pressure neutron diffraction experiment was conducted on a δ-phase stabilized plutonium alloy with isotope 242 Pu. Upon room-temperature compression, neither of the previously reported pressure-induced transformation paths, δ → α' or δ → γ’ → α', was observed up to 1.2 GPa. Instead, a drastic reduction in the diffraction intensity of the δ phase was observed when the pressure was above 0.8 GPa. At the highest pressure of the experiment (1.2 GPa), the diffraction data appear to be characteristic of an amorphous state, manifested by the diminishing intensities of all diffraction lines. Additionally, no evidence was found to support the transformation to a body-centered tetragonal structure (δ’), which was previously inferred from the diffraction line broadening during initial compression to 0.1 GPa. The discrepancies between the present and previous experiments suggest a substantial strain-induced stabilization of the δ-phase and is presumably attributed to the different stress states in the high-pressure environments. From the pressure - volume measurements, the determined isothermal bulk modulus for the δ-phase is in the range of 31.9 ± 1.3–34.8 ± 1.8 GPa using different pressure scales, comparable to those obtained from the resonant ultrasound spectroscopy measurements of the alloys of similar composition. Finally, the pressure-induced elastic softening is neither convinced in the present work, nor can it be resolved from the diffraction experiments if it is intrinsically weak.

36 MATERIALS SCIENCE↗

Multielectrode electrochemical cell for in situ structural characterization of amorphous thin-film catalysts using high-energy X-ray scattering

A multielectrode-based electrochemical cell allows the structural characterization of an amorphous thin-film water oxidation catalyst under various electrochemical potentials using high-energy X-ray scattering and atomic pair distribution function (PDF) techniques. A multielectrode with five electrodes provides a sufficiently low background signal to enable high-energy X-ray scattering (HEXS) measurements and amplifies the extremely low HEXS signals from samples for high-resolution PDF analysis of in situ data from thin-film catalysts. Glassy carbon (GC) creates a relatively low intensity HEXS pattern and is used as a working electrode. Instead of a three-dimensional (3D) porous electrode architecture, the flat geometry of the electrode enables various deposition techniques to be used for the preparation of a highly conductive metal oxide layer. PDF analysis demonstrates high spatial resolution for a 230 nm thick amorphous iridium oxide film deposited on two roughened 60 µm thick GC electrodes. The PDF analysis resolves the domain size and distinguishes changes in fine structure which are directly correlated with the structure and function of the catalysts. In conclusion, the results bring the opportunity to analyze the structure of nanometre-scale amorphous thin-film catalysts in an electrolyte-compatible and compact 3D-printed electrochemical cell in a three-electrode configuration.

36 MATERIALS SCIENCE↗

Cross‐compartment metabolic coupling enables flexible photoprotective mechanisms in the diatom Phaeodactylum tricornutum

Summary Photoacclimation consists of short‐ and long‐term strategies used by photosynthetic organisms to adapt to dynamic light environments. Observable photophysiology changes resulting from these strategies have been used in coarse‐grained models to predict light‐dependent growth and photosynthetic rates. However, the contribution of the broader metabolic network, relevant to species‐specific strategies and fitness, is not accounted for in these simple models. We incorporated photophysiology experimental data with genome‐scale modeling to characterize organism‐level, light‐dependent metabolic changes in the model diatom Phaeodactylum tricornutum . Oxygen evolution and photon absorption rates were combined with condition‐specific biomass compositions to predict metabolic pathway usage for cells acclimated to four different light intensities. Photorespiration, an ornithine‐glutamine shunt, and branched‐chain amino acid metabolism were hypothesized as the primary intercompartment reductant shuttles for mediating excess light energy dissipation. Additionally, simulations suggested that carbon shunted through photorespiration is recycled back to the chloroplast as pyruvate, a mechanism distinct from known strategies in photosynthetic organisms. Our results suggest a flexible metabolic network in P. tricornutum that tunes intercompartment metabolism to optimize energy transport between the organelles, consuming excess energy as needed. Characterization of these intercompartment reductant shuttles broadens our understanding of energy partitioning strategies in this clade of ecologically important primary producers.

59 BASIC BIOLOGICAL SCIENCES↗

TH-A-18C-06: A Scatter Elimination Scheme for Cone Beam CT Using An Oscillating Narrow Beam

Purpose: While cone beam CT (CBCT) has been widely used in image guided radiation therapy, its low image quality, primarily caused by scattered x-rays, hinders advanced clinical applications, e.g., CBCT based on-line adaptive re-planning. We propose in this abstract a new scheme called oscillating narrow beam CBCT (ONB-CBCT) to eliminate scatter signals. Methods: ONB-CBCT consists of two major components. 1) Oscillating narrow beam (ONB) scan and 2) partitioned flat panel containing multiple individual detector strips and their own readouts. Both the beam oscillation and detector partition are along the superior-inferior (SI) direction. During data acquisition, at a given projection, the narrow beam sweep through the detector region, and different portions of the detector acquires projection data in synchrony with the narrow beam. ONB can be generated by a rotating slit collimator design with conventional tube with single focal spot, or by directly using a new source with multiple focal spots. A proof-of-principle study via Monte Carlo simulation is conducted to demonstrate the feasibility of ONB-CBCT. Results: As the beam becomes narrower, more and more scatter signals are eliminated. For the case with a bowtie filter and using 15 ONBs, the maximum and the average intensity error due to scatter are below 20 and 10 HU, respectively. Conclusion: ONB yields a narrowed exposure field at each snapshot and hence an inherently negligible scatter effect. Meanwhile, the individualized detector units guarantee high frame rate detection and hence a same large volume coverage as that in conventional CBCT. In summary, ONB-CBCT is a promising design to achieve high-quality CBCT imaging. This study is supported in part by NIH (1R01CA154747-01)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Urbanization and malaria have a contextual relationship in endemic areas: A temporal and spatial study in Ghana

In West Africa, malaria is one of the leading causes of disease-induced deaths. Existing studies indicate that as urbanization increases, there is corresponding decrease in malaria prevalence. However, in malaria-endemic areas, the prevalence in some rural areas is sometimes lower than in some peri-urban and urban areas. Therefore, the relationship between the degree of urbanization, the impact of living in urban areas, and the prevalence of malaria remains unclear. This study explores this association in Ghana, using epidemiological data at the district level (2015–2018) and data on health, hygiene, and education. We applied a multilevel model and time series decomposition to understand the epidemiological pattern of malaria in Ghana. Then we classified the districts of Ghana into rural, peri-urban, and urban areas using administratively defined urbanization, total built areas, and built intensity. We converted the prevalence time series into cross-sectional data for each district by extracting features from the data. To predict the determinant most impacting according to the degree of urbanization, we used a cluster-specific random forest. We find that prevalence is impacted by seasonality, but the trend of the seasonal signature is not noticeable in urban and peri-urban areas. While urban districts have a slightly lower prevalence, there are still pockets with higher rates within these regions. These areas of high prevalence are linked to proximity to water bodies and waterways, but the rise in these same variables is not associated with the increase of prevalence in peri-urban areas. The increase in nightlight reflectance in rural areas is associated with an increased prevalence. We conclude that urbanization is not the main factor driving the decline in malaria. However, the data indicate that understanding and managing malaria prevalence in urbanization will necessitate a focus on these contextual factors. Finally, we design an interactive tool, ’malDecision’ that allows data-supported decision-making.

60 APPLIED LIFE SCIENCES↗

Applying an improved rapid impact assessment matrix method to strategic environmental assessment of urban planning in China

Strategic environmental assessment (SEA) has become an increasingly important decision-support tool for providing information on the environmental implications of a policy, plan, or program. The goal is to safeguard the environment and promote sustainable development at the strategic level. Despite major progress in implementing SEA practices internationally, developing countries, such as China, often lag behind in applying SEA methodology. Lack of available data and time constraints arising from tight schedules create problems. The rapid impact assessment matrix (RIAM) is a potential resource for breaking through such difficulties. Our analysis of RIAM applications suggested that it could become a tool for evaluating strategic alternatives because of its applicability in interdisciplinary settings, its transparency, and its short implementation timeframe. To make it more suitable for the SEA context, we have developed two major improvements to the conventional RIAM process: assignment of weights to assessment indicators and the development of an integrated environmental assessment score (IES). The improved RIAM process was employed in an SEA of the development plan for the Nansha District in Guangzhou, the capital city of Guangdong Province in China. It was used to assess five alternatives for development in Wanqingsha (WQS), a subunit of Nansha, where important ecological resources are located and where industrial development could impact the air quality in the neighboring Hong Kong Special Administrative Region (HKSAR). The evaluation identified WQS-A04 as the preferred alternative. This alternative involved a minimal amount of industrial development – 10% compared with the most intense development alternative – and included important wetland preservation plans. The assessment results have been incorporated into the officially approved development plan for Nansha. The improved RIAM methodology is well adapted to the technical aims of SEA and decision-making structures in China. It offers the potential for delivering timely and quality results to decision-making processes. To achieve the desired efficiency, it is recommended that an SEA procedure take into account findings acquired from an improved RIAM application at an early stage, then, at a later stage, results from more comprehensive assessments conducted using more sophisticated methods should be added, if time and data are available. - Highlights: • RIAM is a potential SEA tool due to its multidisciplinary setting and rapid process. • Weighting index and computing IES are raised for improving RIAM when applied to SEAs. • The improved RIAM boosts SEA effectiveness by timely responding to decision-making. • The improved RIAM is more suitable to an SEA bothered by tight time or data shortage. • The improved RIAM adapts to the technical aims of SEA and decision features in China.

54 ENVIRONMENTAL SCIENCES↗

Native phasing of x-ray free-electron laser data for a G protein–coupled receptor

Serial femtosecond crystallography (SFX) takes advantage of extremely bright and ultrashort pulses produced by x-ray free-electron lasers (XFELs), allowing for the collection of high-resolution diffraction intensities from micrometer-sized crystals at room temperature with minimal radiation damage, using the principle of “diffraction-before-destruction.” However, de novo structure factor phase determination using XFELs has been difficult so far. We demonstrate the ability to solve the crystallographic phase problem for SFX data collected with an XFEL using the anomalous signal from native sulfur atoms, leading to a bias-free room temperature structure of the human A 2A adenosine receptor at 1.9 Å resolution. The advancement was made possible by recent improvements in SFX data analysis and the design of injectors and delivery media for streaming hydrated microcrystals. This general method should accelerate structural studies of novel difficult-to-crystallize macromolecules and their complexes.

47 OTHER INSTRUMENTATION↗

DIRAQ: scalable in situ data- and resource-aware indexing for optimized query performance

Scientific data analytics in high-performance computing environments has been evolving along with the advancement of computing capabilities. With the onset of exascale computing, the increasing gap between compute performance and I/O bandwidth has rendered the traditional post-simulation processing a tedious process. Despite the challenges due to increased data production, there exists an opportunity to benefit from "cheap" computing power to perform query-driven exploration and visualization during simulation time. To accelerate such analyses, applications traditionally augment, post-simulation, raw data with large indexes, which are then repeatedly utilized for data exploration. However, the generation of current state-of-the-art indexes involves a compute- and memory-intensive processing, thus rendering them inapplicable in an in situ context. In this paper we propose DIRAQ, a parallel in situ, in network data encoding and reorganization technique that enables the transformation of simulation output into a query-efficient form, with negligible runtime overhead to the simulation run. DIRAQ's effective core-local, precision-based encoding approach incorporates an embedded compressed index that is 3---6 $$\times $$ ? smaller than current state-of-the-art indexing schemes. Its data-aware index adjustmentation improves performance of group-level index layout creation by up to 35 % and reduces the size of the generated index by up to 27 %. Moreover, DIRAQ's in network index merging strategy enables the creation of aggregated indexes that speed up spatial-context query responses by up to $$10\times $$ 10 ? versus alternative techniques. DIRAQ's topology-, data-, and memory-aware aggregation strategy results in efficient I/O and yields overall end-to-end encoding and I/O time that is less than that required to write the raw data with MPI collective I/O.

Computer Science↗

Nanoscale Mapping and Defect-Assisted Manipulation of Surface Plasmon Resonances in 2D Bi 2 Te 3 /Sb 2 Te 3 In-Plane Heterostructures

Here, the Bi 2 Te 3 /Sb 2 Te 3 in-plane heterostructure is reported as a low-dimensional tunable chalcogenide well suited as plasmonic building block for the visible-UV spectral range. Electron-driven plasmon excitations of low-dimensional Bi 2 Te 3 /Sb 2 Te 3 are investigated by monochromated electron energy loss spectroscopy spectrum imaging. To resolve the nanoscale spatial distribution of various local plasmonic resonances, singular value decomposition is used to disentangle the spectral data and identify the individual spectral contributions of various corner, edge, and face modes. Furthermore, defect-plasmon interactions are investigated both for nanoscale intrinsic and thermally induced extrinsic polygonal defects (in situ sublimation). Signature of defect-induced red shift ranging from a several hundreds of millielectronvolts to a few electronvolts, broadening of various plasmon response, together with selective enhancement and significant variations in their intensity are detected. This study highlights the presence of a heterointerface and identifies defects as physical tuning pathways to modulate the plasmonic response over a broad spectral range. Finally, the experimental observations are compared qualitatively and validated with numerical simulations using the electron-driven discrete dipole approximation. Low-dimensional Bi 2 Te 3 /Sb 2 Te 3 as a less explored plasmonic system holds great promises as emerging platform for integrated plasmonics. Furthermore, introducing controlled structural defects can open the door for nanoengineering of plasmonic properties in such systems.

36 MATERIALS SCIENCE↗

WE-G-204-07: Automated Characterization of Perceptual Quality of Clinical Chest Radiographs: Improvements in Lung, Spine, and Hardware Detection

Purpose: To develop and validate more robust methods for automated lung, spine, and hardware detection in AP/PA chest images. This work is part of a continuing effort to automatically characterize the perceptual image quality of clinical radiographs. [Y. Lin et al. Med. Phys. 39, 7019–7031 (2012)] Methods: Our previous implementation of lung/spine identification was applicable to only one vendor. A more generalized routine was devised based on three primary components: lung boundary detection, fuzzy c-means (FCM) clustering, and a clinically-derived lung pixel probability map. Boundary detection was used to constrain the lung segmentations. FCM clustering produced grayscale- and neighborhood-based pixel classification probabilities which are weighted by the clinically-derived probability maps to generate a final lung segmentation. Lung centerlines were set along the left-right lung midpoints. Spine centerlines were estimated as a weighted average of body contour, lateral lung contour, and intensity-based centerline estimates. Centerline estimation was tested on 900 clinical AP/PA chest radiographs which included inpatient/outpatient, upright/bedside, men/women, and adult/pediatric images from multiple imaging systems. Our previous implementation further did not account for the presence of medical hardware (pacemakers, wires, implants, staples, stents, etc.) potentially biasing image quality analysis. A hardware detection algorithm was developed using a gradient-based thresholding method. The training and testing paradigm used a set of 48 images from which 1920 51×51 pixel{sup 2} ROIs with and 1920 ROIs without hardware were manually selected. Results: Acceptable lung centerlines were generated in 98.7% of radiographs while spine centerlines were acceptable in 99.1% of radiographs. Following threshold optimization, the hardware detection software yielded average true positive and true negative rates of 92.7% and 96.9%, respectively. Conclusion: Updated segmentation and centerline estimation methods in addition to new gradient-based hardware detection software provide improved data integrity control and error-checking for automated clinical chest image quality characterization across multiple radiography systems.

60 APPLIED LIFE SCIENCES↗

The Forcing of Southwestern Asia Teleconnections by Low-Frequency Sea Surface Temperature Variability during Boreal Winter

Winter precipitation over the Hindu Kush–Karakoram (HKK) range in the western Himalayas is generated by westerly perturbations whose dynamics is affected by the North Atlantic Oscillation (NAO). Larger precipitation is typically recorded during the positive NAO phase. In this work, the relationship between the NAOand winter precipitation in theHKKis explored further, using an ensemble of precipitation datasets and the 40-yr ECMWF Re-Analysis (ERA-40) and Twentieth Century Reanalysis (20CR) data. The mechanisms underlying this relationship are discussed, with a focus on the secular variations that occurred in the last century. The NAO exerts its control on HKK precipitation by altering the intensity of westerly winds in the region of the Middle East jet stream (MEJS). Results indicate that evaporation from the Persian Gulf, the northern Arabian Sea, and the Red Sea plays an important role. During positive NAO phases, westerlies are strengthened and enhanced evaporation occurs from these basins owing to higher surface wind speed. The extra moisture combines with stronger westerlies and results in enhanced moisture transport toward the HKK. Precipitation datasets covering the twentieth century show an alternation of periods of strong and weaker influence of the NAO on precipitation in the HKK. It is found that these variations are associated with changes in the spatial pattern of the NAO: the relative position of the two centers of action of the NAO determines to what extent it can modulate the MEJS, affecting precipitation in the HKK.

54 ENVIRONMENTAL SCIENCES↗

GoAmazon 2014/15 Particle Sampling Field Campaign Report

As a part of the GoAmazon 2014/15 field deployments, samples of atmospheric particles were collected at the T3 field site (3° 12' 46.70" S, 60° 35' 53.0, Manacapuru, Brazil) established in the Amazonian region. The site was located downwind from Manaus and therefore, experienced clean conditions when winds were from northwest and polluted conditions when winds were from Manaus. During the second intensive operational period of GoAmazon 2014/15 (09/06/2014-10/02/2014), multiple samples of particles were collected using a cascade Multi-Orifice Uniform Deposition Impactor (MOUDI-110). Size-resolved samples by MOUDI (0.056-0.1, 0.1-0.18, 0.18-0.32, 0.32-0.56, 0.56-1.0, 1.0-1.8 μm) were collected for 6-12 hours. A variety of substrates, compatible with different spectro-microscopy methods of analysis, were arranged on the impactor stages. Collected aerosol samples are now stored pending laboratory analysis using multi-modal methods of chemical imaging. Our approach is to analyze only the samples of specific interest. We use the field campaign records and data on meteorology, as well as in situ measurements of gases and aerosols, to select the subset of samples for the in-depth laboratory analysis for selected episodes where changes in chemical composition of particles can be correlated with other data recorded at the site. Hence, we do not expect to perform detailed measurements on all samples—rather, only those samples with the greatest potential to provide scientific insight into aerosol chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗