Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
NASA NTRS1927

Pressure Distribution Over Airfoils at High Speeds

This report deals with the pressure distribution over airfoils at high speeds, and describes an extension of an investigation of the aerodynamic characteristics of certain airfoils which was presented in NACA Technical Report no. 207. The results presented in report no. 207 have been confirmed and extended to higher speeds through a more extensive and systematic series of tests. Observations were also made of the air flow near the surface of the airfoils, and the large changes in lift coefficients were shown to be associated with a sudden breaking away of the flow from the upper surface. The tests were made on models of 1-inch chord and comparison with the earlier measurements on models of 3-inch chord shows that the sudden change in the lift coefficient is due to compressibility and not to a change in the Reynolds number. The Reynolds number still has a large effect, however, on the drag coefficient. The pressure distribution observations furnish the propeller designer with data on the load distribution at high speeds, and also give a better picture of the air-flow changes.

Briggs, L J↗
NASA NTRS2009

Use of Fuzzycones for Sun-Only Attitude Determination: THEMIS Becomes ARTEMIS

In order for two THEMIS probes to successfully transition to ARTEMIS it will be necessary to determine attitudes with moderate accuracy using Sun sensor data only. To accomplish this requirement, an implementation of the Fuzzycones maximum likelihood algorithm was developed. The effect of different measurement uncertainty models on Fuzzycones attitude accuracy was investigated and a bin-transition technique was introduced to improve attitude accuracy using data with uniform error distributions. The algorithm was tested with THEMIS data and in simulations. The analysis results show that the attitude requirements can be met using Fuzzycones and data containing two bin-transitions.

Hashmall, Joseph A.↗
NASA NTRS2007

Interpreting Chromosome Aberration Spectra

Ionizing radiation can damage cells by breaking both strands of DNA in multiple locations, essentially cutting chromosomes into pieces. The cell has enzymatic mechanisms to repair such breaks; however, these mechanisms are imperfect and, in an exchange process, may produce a large-scale rearrangement of the genome, called a chromosome aberration. Chromosome aberrations are important in killing cells, during carcinogenesis, in characterizing repair/misrepair pathways, in retrospective radiation biodosimetry, and in a number of other ways. DNA staining techniques such as mFISH ( multicolor fluorescent in situ hybridization) provide a means for analyzing aberration spectra by examining observed final patterns. Unfortunately, an mFISH observed final pattern often does not uniquely determine the underlying exchange process. Further, resolution limitations in the painting protocol sometimes lead to apparently incomplete final patterns. We here describe an algorithm for systematically finding exchange processes consistent with any observed final pattern. This algorithm uses aberration multigraphs, a mathematical formalism that links the various aspects of aberration formation. By applying a measure to the space of consistent multigraphs, we will show how to generate model-specific distributions of aberration processes from mFISH experimental data. The approach is implemented by software freely available over the internet. As a sample application, we apply these algorithms to an aberration data set, obtaining a distribution of exchange cycle sizes, which serves to measure aberration complexity. Estimating complexity, in turn, helps indicate how damaging the aberrations are and may facilitate identification of radiation type in retrospective biodosimetry.

Levy, Dan↗
NASA NTRS2015

Informal Statistics Help Desk

Back by popular demand, the JSC Biostatistics Lab is offering an opportunity for informal conversation about challenges you may have encountered with issues of experimental design, analysis, data visualization or related topics. Get answers to common questions about sample size, repeated measures, violation of distributional assumptions, missing data, multiple testing, time-to-event data, when to trust the results of your analyses (reproducibility issues) and more.

Ploutz-Snyder, R. J.↗
NASA NTRS2020

NASA Global Satellite and Model Data Products and Services for Tropical Meteorology and Climatology

Satellite remote sensing and model data play an important role in research and applications of tropical meteorology and climatology over vast, data sparse oceans and remote continents. Since the first weather satellite was launched by NASA in 1960, a large collection of NASA's Earth science data is freely available to the research and application communities around the world, significantly improving our overall understanding of the Earth system and environment. Established in the mid-80s, the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), located in Maryland, USA, is a data archive center for multidisciplinary, satellite and model assimilation data products. As one of the 12 NASA data centers in Earth Sciences, GES DISC hosts several important NASA satellite missions for tropical meteorology and climatology such as the Tropical Rainfall Measuring Mission (TRMM), the Global Precipitation Measurement (GPM) mission and the Modern-Era Retrospective analysis for Research and Applications (MERRA). Over the years, GES DISC has developed data services to facilitate data discovery, access, distribution, analysis and visualization, including Giovanni, an online analysis and visualization tool without the need to download data and software. Despite many efforts for improving data access, still quite a number of challenges remain, such as finding datasets and services for a specific research topic or project, especially for inexperienced users or users outside the remote sensing community. In this article, we list and describe major NASA satellite remote sensing and model datasets and services for tropical meteorology and climatology along with examples of using the data and services, in hope that may help users better utilize the information in their research and applications.

tropical meteorology and climatology, data, servic↗
NASA NTRS2021

HAPI: An API Standard for Accessing Heliophysics Time Series Data

Heliophysics data analysis often involves combining diverse science measurements, many of them captured as time series. Although there are now only a few commonly used data file formats, the diversity in mechanisms for automated access to and aggregation of such data holdings can make analysis that requires intercomparison of data from multiple data providers difficult. The Heliophysics Application Programmer's Interface (HAPI) is a recently developed standard for accessing distributed time series data to increase interoperability. The HAPI specification is based on the common elements of existing data services, and it standardizes the two main parts of a data service: the request interface and the response data structures. The interface is based on the REpresentational State Transfer (REST) or RESTful architecture style, and the HAPI specification defines five required REST endpoints. Data are returned via a streaming format that hides file boundaries; the metadata is detailed enough for the content to be scientifically useful, e.g., plotted with appropriate axes layout, units, and labels. Multiple mature HAPI-related open-source projects offer server-side implementation tools and client-side libraries for reading HAPI data in multiple languages (IDL, Java, MATLAB, and Python). Multiple data providers in the US and Europe have added HAPI access alongside their existing interfaces. Based on this experience, data can be served via HAPI with little or no information loss compared to similar existing web interfaces. Finally, HAPI has been recommended as a COSPAR standard for time series data delivery.

Robert S. Weigel↗
NASA NTRS1974

Omega flight-test data reduction sequence

Computer programs for Omega data conversion, summary, and preparation for distribution are presented. Program logic and sample data formats are included, along with operational instructions for each program. Flight data (or data collected in flight format in the laboratory) is provided by the Ohio University Omega receiver base in the form of 6-bit binary words representing the phase of an Omega station with respect to the receiver's local clock. All eight Omega stations are measured in each 10-second Omega time frame. In addition, an event-marker bit and a time-slot D synchronizing bit are recorded. Program FDCON is used to remove data from the flight recorder tape and place it on data-processing cards for later use. Program FDSUM provides for computer plotting of selected LOP's, for single-station phase plots, and for printout of basic signal statistics for each Omega channel. Mean phase and standard deviation are printed, along with data from which a phase distribution can be plotted for each Omega station. Program DACOP simply copies the Omega data deck a controlled number of times, for distribution to users.

Lilley, R. W.↗
NASA NTRS1988

Geodetic measurement of deformation in California

The very long baseline interferometry (VLBI) measurements made in the western U.S. since 1979 as part of the NASA Crustal Dynamics Project provide discrete samples of the temporal and spatial deformation field. The interpretation of the VLBI-derived rates of deformation requires an examination of geologic information and more densely sampled ground-based geodetic data. In the first two of three related studies embodying this thesis triangulation and trilateration data measured on two regional networks are processed, one in the central Mojave Desert and one in the Coast Ranges east of the San Andreas fault. At the spatial scales spanned by these local geodetic networks, auxiliary geologic and geophysical data have been utilized to examine the relation between measured incremental strain and the accommodation of strain seen in local geological structures, strain release in earthquakes, and principal stress directions inferred from in situ measurements. In the third study, VLBI data from stations distributed across the Pacific - North American plate boundary zone in the western United States are processed. The VLBI data have been used to constrain the integrated rate of deformation across portions of the continental plate boundary in California and to provide a tectonic framework to interpret regional geodetic and geologic studies.

Sauber, Jeanne Marie↗
NASA NTRS2013

Wireless Integrated Microelectronic Vacuum Sensor System

NASA Stennis Space Center's (SSC's) large rocket engine test facility requires the use of liquid propellants, including the use of cryogenic fluids like liquid hydrogen as fuel, and liquid oxygen as an oxidizer (gases which have been liquefied at very low temperatures). These fluids require special handling, storage, and transfer technology. The biggest problem associated with transferring cryogenic liquids is product loss due to heat transfer. Vacuum jacketed piping is specifically designed to maintain high thermal efficiency so that cryogenic liquids can be transferred with minimal heat transfer. A vacuum jacketed pipe is essentially two pipes in one. There is an inner carrier pipe, in which the cryogenic liquid is actually transferred, and an outer jacket pipe that supports and seals the vacuum insulation, forming the "vacuum jacket." The integrity of the vacuum jacketed transmission lines that transfer the cryogenic fluid from delivery barges to the test stand must be maintained prior to and during engine testing. To monitor the vacuum in these vacuum jacketed transmission lines, vacuum gauge readings are used. At SSC, vacuum gauge measurements are done on a manual rotation basis with two technicians, each using a handheld instrument. Manual collection of vacuum data is labor intensive and uses valuable personnel time. Additionally, there are times when personnel cannot collect the data in a timely fashion (i.e., when a leak is detected, measurements must be taken more often). Additionally, distribution of this data to all interested parties can be cumbersome. To simplify the vacuum-gauge data collection process, automate the data collection, and decrease the labor costs associated with acquiring these measurements, an automated system that monitors the existing gauges was developed by Invocon, Inc. For this project, Invocon developed a Wireless Integrated Microelectronic Vacuum Sensor System (WIMVSS) that provides the ability to gather vacuum-gauge measurements automatically and wirelessly, in near-real time - using a low-maintenance, lowpower sensor mesh network. The WIMVSS operates by using a self-configuring mesh network of wireless sensor units. Mesh networking is a type of networking where each sensor or node can capture and disseminate its own data, but also serve as a relay to receive and transmit data from other sensors. Each sensor node can synchronize with adjacent sensors, and propagate data from one sensor to the next, until the destination is reached. In this case, the destination is a Network Interface Unit (NIU). The WIMVSS sensors are mounted on the existing vacuum gauges. Information gathered by the sensors is sent to the NIU. Because of the mesh networking, if a sensor cannot directly send the data to the NIU, it can be propagated through the network of sensors. The NIU requires antenna access to the sensor units, AC power, and an Ethernet connection. The NIU bridges the sensor network to a WIMVSS server via an Ethernet connection. The server is configured with a database, a Web server, and proprietary interface software that makes it possible for the vacuum measurements from vacuum jacketed fluid lines to be saved, retrieved, and then displayed from any Web-enabled PC that has access to the Internet. Authorized users can then simply access the data from any PC with Internet connection. Commands can also be sent directly from the Web interface for control and maintenance of the sensor network. The technology enabled by the WIMVSS decreases labor required for gathering vacuum measurements, increases access to vacuum data by making it available on any computer with access to the Internet, increases the frequency with which data points can be acquired for evaluating the system, and decreases the recurring cost of the sensors by using off-the-shelf components and integrating these with heritage vacuum gauges.

Krug, Eric↗
NASA NTRS1974

Earth Observatory Satellite system definition study. Report no. 3: Design/cost tradeoff studies. Appendix E: EOS program supporting system trade data. Part 2: System trade studies no. 9 - 19

The relative merits of several international data acquisition (IDA) alternatives for the Earth Observatory Satellite (EOS) are established and rated on a cost effectiveness basis. The primary alternatives under consideration are: (1) direct transmission to foreign ground stations, (2) a wideband video tape recorder system for collection of foreign data and processing and distribution from the United States, and (3) a tracking and data relay satellite (TDRS) system for the relay of foreign data to the United States for processing and distribution. A requirements model is established for the analysis on the basis of the heaviest concentration of agricultural areas around the world. The model, the orbit path and the constraints of EOS and data volume summaries are presented. Alternative system descriptions and costs are given in addition to cost-performance summaries.

Source record↗
NASA NTRS1990

BATSE software for the analysis of the gamma ray burst spatial distribution

The Burst and Transient Source Experiment (BATSE) on the Gamma Ray Observatory (GRO) is designed to study astronomical gamma ray sources and to provide better positional, spectral, and time resolution about these objects than has previously been possible from one experiment. The procedure to be used in the analysis of the gamma ray burst spatial distribution is presented. Data is input from BATSE via the Gamma Ray Burst Catalog (listing individual burst positions, flux values, and associated errors) and the Sky Sensitivity Map (which summarizes observational selection effects in table format). A FORTRAN program generates Monte Carlo burst catalogs, which are models to be compared to the actual distribution. The Monte Carlo models are then filtered through the Sky Sensitivity Map so that they suffer from the same selection effects as the actual catalog data. Additionally, each burst position is converted into a probability distribution to mimic BATSE positional sensitivity. The Burst Catalog, Monte Carlo burst catalog, and Sky Sensitivity Map are then passed onto an IDL program that compares the catalogs for statistical significance. The Sky Sensitivity Map is used to estimate how often each sky area is observed above the minimum flux level in question. Each burst found in this sky area is then weighted according to the frequency with which this sky area is observed. The catalogs are then compared via tests of homogeneity (based on their radial distributions) and isotropy (based upon their angular distributions). The results of the statistical comparisons along with graphs and charts of the summaries, are output from the IDL program for study.

Hakkila, Jon↗
NASA NTRS2011

Distributed Monitoring of the R(sup 2) Statistic for Linear Regression

The problem of monitoring a multivariate linear regression model is relevant in studying the evolving relationship between a set of input variables (features) and one or more dependent target variables. This problem becomes challenging for large scale data in a distributed computing environment when only a subset of instances is available at individual nodes and the local data changes frequently. Data centralization and periodic model recomputation can add high overhead to tasks like anomaly detection in such dynamic settings. Therefore, the goal is to develop techniques for monitoring and updating the model over the union of all nodes data in a communication-efficient fashion. Correctness guarantees on such techniques are also often highly desirable, especially in safety-critical application scenarios. In this paper we develop DReMo a distributed algorithm with very low resource overhead, for monitoring the quality of a regression model in terms of its coefficient of determination (R2 statistic). When the nodes collectively determine that R2 has dropped below a fixed threshold, the linear regression model is recomputed via a network-wide convergecast and the updated model is broadcast back to all nodes. We show empirically, using both synthetic and real data, that our proposed method is highly communication-efficient and scalable, and also provide theoretical guarantees on correctness.

Bhaduri, Kanishka↗
NASA NTRS1976

Software techniques for a distributed real-time processing system

The paper describes software techniques developed for the Unified Data System (UDS), a distributed processor network for control and data handling onboard a planetary spacecraft. These techniques include a structured language for specifying the programs contained in each module, and a small executive program in each module which performs scheduling and implements the module task.

Lesh, F.↗
NASA NTRS1991

The EOSDIS Version 0 Distributed Active Archive Center for physical oceanography and air-sea interaction

The Distributed Active Archive Center (DAAC) at the Jet Propulsion Laboratory will support scientists specializing in physical oceanography and air-sea interaction. As part of the NASA Earth Observing System Data and Information System Version 0 the DAAC will build on existing capabilities to provide services for data product generation, archiving, distribution and management of information about data. To meet scientist's immediate needs for data, existing data sets from missions such as Seasat, Geosat, the NOAA series of satellites and the Global Positioning Satellite system will be distributed to investigators upon request. In 1992, ocean topography, wave and surface roughness data from the Topex/Poseidon radar altimeter mission will be archived and distributed. New data products will be derived from Topex/Poseidon and other sensor systems based on recommendations of the science community. In 1995, ocean wind field measurements from the NASA Scatterometer will be supported by the DAAC.

Hilland, Jeffrey E.↗
NASA NTRS1991

Spatial Analysis and Modeling Systems (SAMS)

The objective is to develop a uniform environmental data gathering and distribution system to support (1) emergency management for environmental disasters, and (2) the calibration and validation of remotely sensed data. Initial activities will be to select a data test site and to demonstrate multi-discipline applications using simulated or satellite data in a non real-time mode. Rainfall and flooding are chosen as the testbeds for the SAMS concept because of the abundance of data and the availability of models. The capability to display and process GOES data and analyze GOES generated rain-rate maps will be integrated into SAMS.

Vermillion, Charles↗
NASA NTRS1996

Maximum ADPE Approach for a High Rate CCSDS Return Link Processing System

The earth observing system data and operations system (EDOS) multi-mission data processing and distribution system for the earth observing system is considered. The EDOS was based on the Consultative Committee for Space Data Systems (CCSDS) protocols. The development included the challenge of developing and demonstrating a 150 Mbps CCSDS return link processing capability for the support of the first EDOS delivery. The approach used general-purpose automated data processing equipment (ADPE) and minimized the use of customized hardware. The way in which the system was developed is described. The principle design decisions and the performance benchmark results are presented.

Krimchansky, Alexander↗