Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

In Situ TEM Microcompression Pillar Size Effects in Fe-9Cr ODS

The objective of this paper is to ascertain the existence of a specimen size threshold, below which the material no longer exhibits bulk mechanical behavior when tested using in situ transmission electron microscopic (TEM) micro-compression pillars. In this work, sub-micron sized pillars of a model Fe-9Cr oxide dispersion strengthened (ODS) alloy were compressed in TEM in situ at room temperature, and attempts have been made to quantify the resulting data. Results are compared to mechanical property values in the archival literature, and a discussion on the validity of quantitative in situ TEM micro-compression data for ODS steel is included. In situ TEM mechanical testing is a relatively new technique enabling concurrent TEM imaging and mechanical testing of sub-micron-sized electron-transparent specimens. Due to limited sample volume of many nuclear materials, in situ TEM mechanical testing holds great promise for advancing our understanding of deformation phenomena. But it is well known that the dramatically reduced specimen size required for in situ testing can affect quantitative and qualitative deformation behaviors. However, Kiener, et al. used in situ TEM micro-compression pillars on irradiated and unirradiated single-crystal copper. They observed size independence in the irradiated material, while the unnirradiated material displayed a size threshold below which the mechanical properties deviated from those of bulk Cu. They assert that the more densely-spaced obstacles in irradiated Cu allow it to display bulk properties even in specimens having ∼ 100 nm dimensions. Similar to Kiener's findings, we hypothesize that unirradiated ODS will demonstrate a size threshold, but the in situ TEM micro-compression technique can be extended from single crystal materials to engineering alloys. An Fe-9Cr model ODS alloy was chosen for this study because of the broad interest in ODS for advanced nuclear reactors. ODS alloys exhibit high irradiation tolerance and high temperature creep resistance. New insight into deformation processes gained through in situ TEM mechanical testing could be valuable for the validation of ODS alloys for next generation nuclear reactors. The fact that the compressive yield stress and elastic modulus do not follow distinct trends as a function of specimen size is likely due to the high density of obstacles to dislocation motion. The ODS microstructure contains such obstacles as oxide nanoparticles, a fine grain structure, a high density of dislocation lines, and carbide precipitates. Since the deformation behavior is governed by the minimum separation distance between obstacles [1], it is plausible that the high obstacle density enables ODS alloy micropillars to exhibit bulk-like mechanical properties even prior to irradiation. Future work will focus on: (1) developing finite element models to help explain the difference in elastic moduli between bulk and micropillar tests, (2) understanding the spread in yield stress measurements at fixed micropillar volumes, and (3) extending this study to irradiated ODS. (authors)

36 MATERIALS SCIENCE↗

Numerical Simulation of Supersonic Compression Corners and Hypersonic Inlet Flows Using the RPLUS2D Code

A two-dimensional computational code, PRLUS2D, which was developed for the reactive propulsive flows of ramjets and scramjets, was validated for two-dimensional shock-wave/turbulent-boundary-layer interactions. The problem of compression corners at supersonic speeds was solved using the RPLUS2D code. To validate the RPLUS2D code for hypersonic speeds, it was applied to a realistic hypersonic inlet geometry. Both the Baldwin-Lomax and the Chien two-equation turbulence models were used. Computational results showed that the RPLUS2D code compared very well with experimentally obtained data for supersonic compression corner flows, except in the case of large separated flows resulting from the interactions between the shock wave and turbulent boundary layer. The computational results compared well with the experiment results in a hypersonic NASA P8 inlet case, with the Chien two-equation turbulence model performing better than the Baldwin-Lomax model.

Kapoor, Kamlesh↗

Scientific Data Services -- A High-Performance I/O System with Array Semantics

As high-performance computing approaches exascale, the existing I/O system design is having trouble keeping pace in both performance and scalability. We propose to address this challenge by adopting database principles and techniques in parallel I/O systems. First, we propose to adopt an array data model because many scientific applications represent their data in arrays. This strategy follows a cardinal principle from database research, which separates the logical view from the physical layout of data. This high-level data model gives the underlying implementation more freedom to optimize the physical layout and to choose the most effective way of accessing the data. For example, knowing that a set of write operations is working on a single multi-dimensional array makes it possible to keep the subarrays in a log structure during the write operations and reassemble them later into another physical layout as resources permit. While maintaining the high-level view, the storage system could compress the user data to reduce the physical storage requirement, collocate data records that are frequently used together, or replicate data to increase availability and fault-tolerance. Additionally, the system could generate secondary data structures such as database indexes and summary statistics. We expect the proposed Scientific Data Services approach to create a “live” storage system that dynamically adjusts to user demands and evolves with the massively parallel storage hardware.

97 MATHEMATICS AND COMPUTING↗

Analysis of Compression Algorithm in Ground Collision Avoidance Systems (Auto-GCAS)

Automatic Ground Collision Avoidance Systems (Auto-GCAS) utilizes Digital Terrain Elevation Data (DTED) stored onboard a plane to determine potential recovery maneuvers. Because of the current limitations of computer hardware on military airplanes such as the F-22 and F-35, the DTED must be compressed through a lossy technique called binary-tree tip-tilt. The purpose of this study is to determine the accuracy of the compressed data with respect to the original DTED. This study is mainly interested in the magnitude of the error between the two as well as the overall distribution of the errors throughout the DTED. By understanding how the errors of the compression technique are affected by various factors (topography, density of sampling points, sub-sampling techniques, etc.), modifications can be made to the compression technique resulting in better accuracy. This, in turn, would minimize unnecessary activation of A-GCAS during flight as well as maximizing its contribution to fighter safety.

Schmalz, Tyler↗

TOPEX/POSEIDON GPS Demonstration Experiment Data

Global Positioning Satellite (GPS) measurements obtained from the on-board TOPEX/POSEIDON demonstration flight receiver and a global network of ground receivers are available from the GPS Data Handling Facility (GDHF) archive. Ground receiver observations are derived from a six station subset of the GPS global tracking network. The six TOPEX ground stations yielded 95 percent of the expected data during the six month demonstration phase from November, 1992 to April, 1993. For the same period, 98 percent of the available P-code tracking from the TOPEX flight receiver was obtained. Raw carrier phase and P-code pseudorange measurements are provided for the ground and flight receivers along with an additional file of calibrated and compressed flight receiver data...

Guinn, J. R.↗

Mechanical and optical response of [100] lithium fluoride to multi-megabar dynamic pressures

An understanding of the mechanical and optical properties of lithium fluoride (LiF) is essential to its use as a transparent tamper and window for dynamic materials experiments. In order to improve models for this material, we applied iterative Lagrangian analysis to ten independent sets of data from magnetically driven planar shockless compression experiments on single crystal [100] LiF to pressures as high as 350 GPa. We found that the compression response disagreed with a prevalent tabular equation of state for LiF that is commonly used to interpret shockless compression experiments. We also present complementary data from ab initio calculations performed using the diffusion quantum Monte Carlo method. The agreement between these two data sets lends confidence to our interpretation. In order to aid in future experimental analysis, we have modified the tabular equation of state to match the new data. We have also extended knowledge of the optical properties of LiF via shock-compression and shockless compression experiments, refining the transmissibility limit, measuring the refractive index to ~300 GPa, and confirming the nonlinear dependence of the refractive index on density. Lastly, we present a new model for the refractive index of LiF that includes temperature dependence and describe a procedure for correcting apparent velocity to true velocity for dynamic compression experiments.

36 MATERIALS SCIENCE↗

Massive-scale RDF Processing Using Compressed Bitmap Indexes

The Resource Description Framework (RDF) is a popular data model for representing linked data sets arising from the web, as well as large scienti c data repositories such as UniProt. RDF data intrinsically represents a labeled and directed multi-graph. SPARQL is a query language for RDF that expresses subgraph pattern- nding queries on this implicit multigraph in a SQL- like syntax. SPARQL queries generate complex intermediate join queries; to compute these joins e ciently, we propose a new strategy based on bitmap indexes. We store the RDF data in column-oriented structures as compressed bitmaps along with two dictionaries. This paper makes three new contributions. (i) We present an e cient parallel strategy for parsing the raw RDF data, building dictionaries of unique entities, and creating compressed bitmap indexes of the data. (ii) We utilize the constructed bitmap indexes to e ciently answer SPARQL queries, simplifying the join evaluations. (iii) To quantify the performance impact of using bitmap indexes, we compare our approach to the state-of-the-art triple-store RDF-3X. We nd that our bitmap index-based approach to answering queries is up to an order of magnitude faster for a variety of SPARQL queries, on gigascale RDF data sets.

97 MATHEMATICS AND COMPUTING↗

Combining Hadoop with MPI to Solve Metagenomics Problems that are both Data- and Compute-intensive

Metagenomics, the study of all microbial species cohabitants in an environment, usually produces large amount of sequence data varying from several GBs to a few TBs. Analyzing metagenomics data includes both data-intensive and compute-intensive steps, making the entire process hard to scale. Here we aim to optimize a metagenomics application that partitions the shortgun metagenomics sequences based on their species of origin. Our solution combines MapReduce-based BioPig analytic toolkit with MPI to provide scalability in respective to both data and compute. We also made some improvements to the existing BioPig toolkit by using simplified data types and compressed k-mer storage. These optimizations leads up to 193× speedup for the computing-intensive step and 9.6× speedup over the entire pipeline. Our optimized application is also capable of processing datasets that are 16 times larger on the same hardware platform. These conclusions indicate integrating heterogeneous technologies such as Hadoop and MPI is quite efficient to solve large genomics problems that are both data-intensive and compute-intensive.

97 MATHEMATICS AND COMPUTING↗

CODAS Data from Oliktok Point, Beaufort Sea, Alaska

Cryosphere/Ocean Distributed Acoustic Sensing (CODAS) data collected from the Beaufort Sea, Alaska, using ~37.4 km of dark telecommunications fiber located at Oliktok Point, Alaska. Data were collected with a Silixa iDAS, using 10 m gauge length, 2 m spatial resolution, and 1000 Hz sample rate. Provided here are the DAS-recorded time series for the rapid refreeze event described in Baker & Abbott (2022) (see link below). This covers a date range of 2021-11-10 15:00 UTC to 2021-11-11 17:00 UTC. Data have been decimated to 100 Hz and 20 m (i.e., every 10th channel for 1831 channels, total), as used in Baker & Abbott (2022). Data have been extracted from raw format into 1-hour long .sac* files and organized into directories by channel number, spanning channels 100 to 18400. Time series units are nano-strainrate (nm/m/s). For distribution, data have been compressed into .zip files containing all time series files for 100 channels. *For information on the Seismic Analysis Code (SAC) file format: https://seiscode.iris.washington.edu/projects/sac

16 TIDAL AND WAVE POWER↗

Human Factors Evaluation of Conflict Detection Tool for Terminal Area

A conflict detection and resolution tool, Terminal-area Tactical Separation-Assured Flight Environment (T-TSAFE), is being developed to improve the timeliness and accuracy of alerts and reduce the false alert rate observed with the currently deployed technology. The legacy system in use today, Conflict Alert, relies primarily on a dead reckoning algorithm, whereas T-TSAFE uses intent information to augment dead reckoning. In previous experiments, T-TSAFE was found to reduce the rate of false alerts and increase time between the alert to the controller and a loss of separation over the legacy system. In the present study, T-TSAFE was tested under two meteorological conditions, 1) all aircraft operated under instrument flight regimen, and 2) some aircraft operated under mixed operating conditions. The tool was used to visually alert controllers to predicted Losses of separation throughout the terminal airspace, and show compression errors, on final approach. The performance of T-TSAFE on final approach was compared with Automated Terminal Proximity Alert (ATPA), a tool recently deployed by the FAA. Results show that controllers did not report differences in workload or situational awareness between the T-TSAFE and ATPA cones but did prefer T-TSAFE features over ATPA functionality. T-TSAFE will provide one tool that shows alerts in the data blocks and compression errors via cones on the final approach, implementing all tactical conflict detection and alerting via one tool in TRACON airspace.

Verma, Savita Arora↗

A Multicomponent Blend as a Diesel Fuel Surrogate for Compression Ignition Engine Applications

A mixture of n-dodecane and m-xylene is investigated as a diesel fuel surrogate for compression ignition engine applications. Compared to neat n-dodecane, this binary mixture is more representative of diesel fuel because it contains an alkyl-benzene which represents an important chemical class present in diesel fuels. A detailed multi-component mechanism for n-dodecane and m-xylene was developed by combining a previously developed n-dodecane mechanism with a recently developed mechanism for xylenes. The xylene mechanism is shown to reproduce experimental ignition data from a rapid compression machine and shock tube, speciation data from the jet stirred reactor and flame speed data. This combined mechanism was validated by comparing predictions from the model with experimental data for ignition in shock tubes and for reactivity in a flow reactor. The combined mechanism, consisting of 2885 species and 11754 reactions, was reduced to a skeletal mechanism consisting 163 species and 887 reactions for 3D diesel engine simulations. The mechanism reduction was performed using directed relation graph (DRG) with expert knowledge (DRG-X) and DRG-aided sensitivity analysis (DRGASA) at a fixed fuel composition of 77% of n-dodecane and 23% m-xylene by volume. The sample space for the reduction covered pressure of 1 – 80 bar, equivalence ratio of 0.5 – 2.0, and initial temperature of 700 – 1600 K for ignition. The skeletal mechanism was compared with the detailed mechanism for ignition and flow reactor predictions. Finally, the skeletal mechanism was validated against a spray flame dataset under diesel engine conditions documented on the Engine Combustion Network (ECN) website. These multidimensional simulations were performed using a Representative Interactive Flame (RIF) turbulent combustion model. In conclusion, encouraging results were obtained compared to the experiments with regards to the predictions of ignition delay and lift-off length at different ambient temperatures.

30 DIRECT ENERGY CONVERSION↗

Adaptation of existing facilities to isentropic compression experiments

We demonstrate that the established pulsed power infrastructure at the National High Magnetic Field Laboratory - Pulsed Field Facility (NHMFL-PFF) at the Los Alamos National Laboratory can be adapted to obtain high quality isentropic compression experiment (ICE) data on materials in extreme conditions of dynamic high pressure. Experiments utilized a single-turn magnet pulsed power system at the NHMFL-PFF that was originally designed to measure actinide samples in extremes of high magnetic field (to 300 Tesla). A simple modification to the single-turn magnet has converted it to a fast turnaround dynamic high pressure measurement system. This paper details the work done including important background details that indicate that much more can be accomplished with optimization of the load characteristics in terms of ultimate peak pressures. To match the rise time of the NHMFL capacitor bank ({approx}2 {mu}s versus {approx}0.5 {mu}s for the Sandia Z-machine) the sample dimensions can be relatively large, i.e., up to 5 mm thickness. The maximum stresses are {approx}50GPa (0.5 Mbar) at the maximum bank voltage (60 kV) and higher pressures may be possible if the sample is tamped. For the design and predictions of performance of the NHMFL-ICE experiment it is important to have good predictive models. A SPICE code simulation was chosen to model all aspects of the experiment, electrical and physical. To this end, accurate dynamic load models were developed to simulate the compression and expansion of the dynamic load at high pressures using shock physics principles. A series experiments have been performed which demonstrated the feasibility of the NHMFL-ICE technique. The results will be shown and discussed. The NHMFL-ICE technique is an excellent method for measuring equations of state (EOS) at megabar pressures. Because a complete EOS can be obtained in one experiment from zero to the peak pressure, and because many shots can be fired in one day, the technique promises to provide high quality EOS data at relatively low cost.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Carbon on the Volume of Solid Iron at High Pressure: Implications for Carbon Substitution in Iron Structures and Carbon Content in the Earth’s Inner Core

Understanding the effect of carbon on the density of hcp (hexagonal-close-packed) Fe-C alloys is essential for modeling the carbon content in the Earth’s inner core. Previous studies have focused on the equations of state of iron carbides that may not be applicable to the solid inner core that may incorporate carbon as dissolved carbon in metallic iron. Carbon substitution in hcp-Fe and its effect on the density have never been experimentally studied. We investigated the compression behavior of Fe-C alloys with 0.31 and 1.37 wt % carbon, along with pure iron as a reference, by in-situ X-ray diffraction measurements up to 135 GPa for pure Fe, and 87 GPa for Fe-0.31C and 109 GPa for Fe-1.37C. The results show that the incorporation of carbon in hcp-Fe leads to the expansion of the lattice, contrary to the known effect in body-centered cubic (bcc)-Fe, suggesting a change in the substitution mechanism or local environment. The data on axial compressibility suggest that increasing carbon content could enhance seismic anisotropy in the Earth’s inner core. The new thermoelastic parameters allow us to develop a thermoelastic model to estimate the carbon content in the inner core when carbon is incorporated as dissolved carbon hcp-Fe. The required carbon contents to explain the density deficit of Earth’s inner core are 1.30 and 0.43 wt % at inner core boundary temperatures of 5000 K and 7000 K, respectively.

58 GEOSCIENCES↗

Hydrogen bond symmetrization and equation of state of phase D

We have synthesized phase D at 24 GPa and at temperatures of 1250-1100 C in a multianvil press under conditions of high silica activity. The compressibility of this high-silica-activity phase D (Mg{sub 1.0}Si{sub 1.7}H{sub 3.0}O{sub 6}) has been measured up to 55.8 GPa at ambient temperature by powder X-ray diffraction. The volume (V) decreases smoothly with increasing pressure up to 40 GPa, consistent with the results reported in earlier studies. However, a kink is observed in the trend of V versus pressure above {approx}40 GPa, reflecting a change in the compression behavior. The data to 30 GPa fit well to a third-order Birch-Murnaghan equation of state (EoS), yielding V{sub o} = 85.1 {+-} 0.2 {angstrom}{sup 3}; K{sub o} = 167.9 {+-} 8.6 GPa; and K{prime}{sub o} = 4.3 {+-} 0.5, similar to results for Fe-Al-free phase D reported by Frost and Fei (1999). However, these parameters are larger than those reported for Fe-Al-bearing phase D and for Fe-Al-free phase D. The abnormal volume change in this study may be attributed to the reported hydrogen bond symmetrization in phase D. Fitting a third-order Birch-Murnaghan EoS to the data below 30 GPa yields a bulk modulus K{sub o} = 173 (2) GPa for the hydrogen-off-centered (HOC) phase and K{sub o} = 212 (15) GPa for the data above 40 GPa for the hydrogen-centered (HC) phase, assuming K{prime}{sub o} is 4. The calculated bulk modulus K{sub o} of the HC phase is 18% larger than the bulk modulus K{sub o} of the HOC phase.

08 HYDROGEN↗

X-Ray Reflectometry of DMPS Monolayers on a Water Substrate

The molecular structure of dimyristoyl phosphatidylserine (DMPS) monolayers on a water substrate in different phase states has been investigated by X-ray reflectometry with a photon energy of ~8 keV. According to the experimental data, the transition from a two-dimensional expanded liquid state to a solid gel state (liquid crystal) accompanied by the ordering of the hydrocarbon tails C{sub 14}H{sub 27} of the DMPS molecule occurs in the monolayer as the surface pressure rises. The monolayer thickness is 20 ± 3 and 28 ± 2 Å in the liquid and solid phases, respectively, with the deflection angle of the molecular tail axis from the normal to the surface in the gel phase being 26° ± 8°. At least a twofold decrease in the degree of hydration of the polar lipid groups also occurs under two-dimensional monolayer compression. The reflectometry data have been analyzed using two approaches: under the assumption about the presence of two layers with different electron densities in the monolayer and without any assumptions about the transverse surface structure. Both approaches demonstrate satisfactory agreement between themselves in describing the experimental results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimizing Management of Persistent Data Structures in High-Performance Analytics

Large-scale data analytics workflows ingest massive input data into various data structures, including graphs and key-value datastores. These data structures undergo multiple transformations and computations and are typically reused in incremental and iterative analytics workflows. Persisting in-memory views of these data structures enables reusing them beyond the scope of a single program run while avoiding repetitive raw data ingestion overheads. Memory-mapped I/O enables persisting in-memory data structures without data serialization and deserialization overheads. However, memory-mapped I/O lacks the key feature of persisting consistent snapshots of these data structures for incremental ingestion and processing. The obstacles to efficient virtual memory snapshots using memory-mapped I/O include background writebacks outside the application’s control, and the significantly high storage footprint of such snapshots. To address these limitations, we present Privateer, a memory and storage management tool that enables storage-efficient virtual memory snapshotting while also optimizing snapshot I/O performance. Here, we integrated Privateer into Metall, a state-of-the-art persistent memory allocator for C++, and the Lightning Memory-Mapped Database (LMDB), a widely-used key-value datastore in data analytics and machine learning. Privateer optimized application performance by 1.22× when storing data structure snapshots to node-local storage, and up to 16.7× when storing snapshots to a parallel file system. Privateer also optimizes storage efficiency of incremental data structure snapshots by up to 11× using data deduplication and compression.

Computer science↗

A surprising proliferation of detwinning in β -tin at extreme loading rates

Integrating data from dynamic compression experiments of condensed matter across three national laboratories has led to insight and quantitative calibration of materials strength over decades of loading rate. For many materials, a single strength model (such as PTW) is sufficient to capture the flow-stress strain rate relationship which is monotonic. Here, we show here that β -tin, a tetragonal metal, exhibits dramatic deviations from this behavior. Naive fitting to a single PTW model is insufficient to capture the behavior; indeed, such resulting inferred flow stress versus strain exhibits a non-monotonic behavior. We suggest a resolution to this by proposing that in β -tin there are important Bauschinger effects arising from favorable conditions for twinning and detwinning. A simple yield surface model when paired with PTW hardening captures the experimental data.

36 MATERIALS SCIENCE↗

Evaluation of Graph Analytics Frameworks Using the GAP Benchmark Suite

The analysis of connected data is an increasingly important application in high-performance computing. Such analyses can reveal fraudulent patterns in financial transactions, optimize telecommunications networks, predict information flow in social networks, etc. However, the landscape of graph analytics is highly diverse. Graph algorithms stress processor architectures differently, and no one graph can represent all topologies. Consequently, no single approach or framework is expected to be optimal for all graph analytics problems. To help make sense of this diverse landscape, we evaluated four approaches to graph analytics: GraphBLAS, Galois, BGL17, GraphIt; and compare them against hand-tuned implementations that take advantage of hardware features on our test platform. Graph- BLAS formulates graph analytics as sparse linear algebra. Galois provides syntactic constructs for data parallelism over irregular data structures. BGL17 is a generic C++ template library for implementing graph algorithms. GraphIt provides a domain- specific language to describe and optimize graph algorithms. We use the GAP Benchmark Suite to establish baseline performance and guide the side-by-side evaluation of each framework. GAP consists of 30 tests: six graph analytics algorithms (breadth- first search, single-source shortest path, PageRank, betweenness centrality, connected components, and triangle counting) run on five graphs, each with different topological characteristics (e.g., high diameter, skewed degree distribution, high average degree). High-performance reference implementations are included for each benchmark algorithm. Because a graph can be loaded into memory a number of ways (e.g., flat file on disk, compressed sparse format, data frames, retrieved from SQL or NoSQL databases), our evaluation focused on computational performance rather than I/O. Our results show the relative strengths of each framework.

Graph algorithms, Benchmarking, shared-memory prog↗