Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Curved Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Influence of coolant tube curvature on film cooling effectiveness as detected by infrared imagery

Thermal film cooling footprints observed by infrared imagery from straight, curved, and looped coolant tube geometries are compared. It was hypothesized that the differences in secondary flow and in the turbulence structure of flow through these three tubes should influence the mixing properties between the coolant and the main stream. A flow visualization tunnel, an infrared camera and detector, and a Hilsch tube were employed to test the hypothesis.

Papell, S. S.↗

Repeatable, multiple-peaked structure in Type I X-ray bursts

A distinct, identifiable, multiple-peaked structure has been observed in Type I X-ray bursts from three sources. At energies below 6 keV, the light curves look like typical Type I bursts. At higher energies, the burst is double-peaked, with both the depth of the dip and the separation between the peaks increasing with energy. A light curve of the energy-integrated intensity shows no distinct double peak, suggesting that only a single energy release occurs. Blackbody fits to the evolving burst spectra yield changing radii and temperatures, inversely correlated, during the early part of the burst. The physical interpretation of these changes is uncertain. Burst decay spectra yield relatively constant radii with decreasing temperatures. It is proposed that Compton scattering may be responsible for the dips in the higher-energy light curves by shifting photons to lower energies.

Hoffman, J. A.↗

The extreme ultraviolet spectrum of sunspot plumes. I - Observations

A complete extreme ultraviolet spectrum of a sunspot plume by the Skylab S-055 spectroheliometer is presented, and the relevant observational details are discussed. Identifications and intensities are given for emission lines and continua in the 303-1343 A range. The emission from lines found between 100,000 and a million K are enhanced by up to a factor of 40 compared with quiet and active region spectra. The emission measure curve for the mean spectrum shows a high double peak at log T = 5.7 and 6.0, reflecting the very inhomogeneous spatial structure of the sunspot plumes. The extremely high signal to noise of the spectrum is used to investigate the electron density and ionization stage of the gas based on line ratio techniques. A model of line emission from a gas cooling by radiation alone at constant density is presented, and the observations are compared with various semiempirical and theoretical models.

Noyes, R. W.↗

Old and new observations of V523 Saggitarii

The history of V523 Sgr is reviewed. New photoelectric timings of minimum light are used to improve the period of apsidal rotation and the orbital eccentricity. UBV photometry indicates that the mean spectral type is F0, and not A5. Blue and yellow light curves described here are the first photelectric ones ever obtained. Within satisfactory limits, the light curves have been solved for consistent stellar parameters with the code EBOP. With significant qualifications, a mean value of the stellar structural constant is given.

Koch, Robert H.↗

Detecting Lamb waves with broad-band acousto-ultrasonic signals in composite structures

Lamb waves can be produced and detected in ceramic matrix composites (CMC) and metal matrix composites (MMC) plates using the acousto-ultrasonic configuration employing broadband transducers. Experimental dispersion curves of lowest symmetric and antisymmetric modes behave in a manner analogous to the graphite/polymer theoretical curves. In this study a basis has been established for analyzing Lamb wave velocities for characterizing composite plates. Lamb wave dispersion curves and group velocities were correlated with variations in axial stiffness and shear stiffness in MMC and CMC. For CMC, interfacial shear strength was also correlated with the first antisymmetric Lamb mode.

Kautz, Harold E.↗

Detecting Lamb waves with broadband acousto-ultrasonic signals in composite structures

Lamb waves can be produced and detected in ceramic matrix composites (CMC) and metal matrix composites (MMC) plates using the acousto-ultrasonic configuration employing broadband transducers. Experimental dispersion curves of lowest symmetric and lowest antisymmetric modes behave in a manner analogous to the graphite/polymer theoretical curves. In this study a basis has been established for analyzing Lamb wave velocities for characterizing composite plates. Lamb wave disperison curves and group velocities were correlated with variations in axial stiffness and shear stiffness in MMC and CMC. For CMCs, interfacial shear strength was also correlated with the first antisymmetric Lamb mode.

Kautz, Harold E.↗

Curvature in Arabidopsis inflorescence stems is limited to the region of amyloplast displacement

Gravitropic sensing in stems and stem-like organs is hypothesized to occur in the endodermis. However, since the endodermis runs the entire length of the stem, the precise site of gravisensing has been difficult to define. In this investigation of gravisensitivity in inflorescence stems of Arabidopsis, we positioned stems in a high gradient magnetic field (HGMF) on a rotating clinostat. Approximately 40% of the young, wild-type (WT) inflorescences, for all positions tested, curved toward the HGMF in the vicinity of the stem exposed to the field. In contrast, when the wedge was placed in the basal region of older inflorescence stems, no curvature was observed. As a control, the HGMF was applied to a starchless mutant, and 5% of the stems curved toward the field. Microscopy of the endodermis in the WT showed amyloplast displacement in the vicinity of the HGMF. Additional structural studies demonstrated that the basal region of WT stems experienced amyloplast displacement and, therefore, suggest this region is capable of gravity perception. However, increased lignification likely prevented curvature in the basal region. The lack of apical curvature after basal amyloplast displacement indicates that gravity perception in the base is not transmitted to the apex. Thus, these results provide evidence that the signal (and thus, response) resulting from perception in Arabidopsis inflorescence stems is spatially restricted.

NASA Discipline Plant Biology↗

Nanoscale Mechanical Behavior of Nuclear Materials

One of the primary performance objectives targeted for improved performance of nuclear fuels is fracture toughness. New materials or composite fuel architectures that offer greater resistance to cracking under the extreme environments encountered during nuclear reactor service would provide significant improvements to steady state (e.g. heat transfer, fuel redistribution) and transient (e.g. radionuclide release at elevated temperatures) conditions. Options currently under investigation include 'nontraditional' nuclear fuels designated around high uranium density. These include uranium silicides, uranium borides, and composite fuel materials constructed of these and uranium nitride or uranium dioxide. The increase uranium density compared with uranium dioxide (UO{sub 2}) has made them interesting to a new generation of nuclear fuels research driven by the renewed push for accident-tolerant light water reactor (LWR) fuels. Measurement of the thermophysical and thermodynamic properties of these constituent materials has progressed in recent years, but evaluation of mechanical properties at relevant temperatures is necessary to support further evaluations. While thermophysical properties such as thermal conductivity, heat capacity, and thermal expansion are generally the primary properties of interest, mechanical properties will play an important role in governing the deformation and fracture of the fuel during both normal operation and potential transients. It is therefore necessary to develop techniques capable of measuring these properties to predict the response of a candidate fuel form to anticipated thermal gradients. Nanoindentation techniques provide a demonstrated alternative to traditional mechanical test methods. Much work has also been carried out over the past few years to obtain stress-strain curves using a spherical nanoindentation approach. The techniques are expected to be useful for measurement of the mechanical properties of local structure of various materials. Nanomechanical test techniques have particular value in the area of nuclear materials, where numerous factors motivate limiting the sample volume to the extent possible. However, few attempts at application of nanoindentation to evaluate the mechanical properties of the nuclear fuels and cladding materials are reported in the literature. The effect of a limited set of variables (e.g. porosity, temperature dependence) on the mechanical properties of UO{sub 2} has been explored using early nanomechanical testing techniques. However, nanomechanical evaluation has not been extended to other nuclear fuels. In this work, we demonstrate the effectiveness of using instrumented spherical nanoindentation test techniques to capture the mechanical response of regions within individual grains in ion-irradiated W and Zr over a range of ion-irradiation conditions. As well as the nanomechanical response of U-Si and UO{sub 2} fuel materials Nanoindentation results obtained at room temperature will be used to express nano- and bulk- mechanical properties as a function of material stoichiometry. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Uncertainty due to Nuclear Data for an MTR Fuel Assembly

For a research reactor, and in particular for the High Flux Reactor (HFR) in Petten, every cycle has a distinct core loading. This regards both the fuel assemblies loading and mainly the loading of the experiment rigs. These experiments can be of the most diverse types, comprising strong absorbing materials as well as fissile isotopes. This poses some challenges at every cycle because of the possible influence on the power profile and neutron flux distribution, which are of great importance for the isotopic production facilities loaded at every cycle in the case of the HFR. The isotope production facilities require predictable and preferably as constant as possible irradiation conditions (neutron flux levels, mainly). Another point of interest is the cycle length, which has to be guaranteed beforehand by taking into account in the assessment analysis the expected on-power core loading changes. These changes are caused by regular loading/unloading of some of the isotope production rigs. For optimization reasons, there is also a tendency to increase the cycle lengths and at the same time to minimize the costs associated to the loading of fresh fuel and control rod assemblies. To justify a further increase in cycle length, a quantification of the uncertainties on the reactivity curve is required, so that the adopted design margins can be decreased in a controlled and responsible manner. The uncertainties in the reactivity curve can be associated to several sources, ranging from uncertainties in engineering and operational parameters to uncertainties in basic nuclear data. This paper includes the quantification of uncertainty on the reactivity curve associated to a typical HFR fuel assembly as result of uncertainties in the cross section data of the main fuel, structural and coolant isotopes. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Large moments in bcc Fe x Co y Mn z ternary alloy thin films

The elemental magnetic moments and the average atomic moment of 10-20 nm thick single crystal bcc (bct) Fe x Co y Mn z films deposited on MgO(001) have been determined as a function of a broad range of compositions. Thin film epitaxy stabilized the bcc structure for 80% of the available ternary compositional space compared to only a 23% stability region for the bulk. The films that display ferromagnetism represent 60% of the available compositional possibilities compared to 25% for the bulk. A maximum average atomic moment of 3.25 ± 0.3 μ B /atom was observed for a bcc Fe 9 Co 62 Mn 29 film (well above the limit of the Slater-Pauling binary alloy curve of 2.45 μ B /atom). Furthermore, the Fe x Co y Mn z ternary alloys that exhibit high moments can only be synthesized as ultrathin films since the bcc structure is not stable in the bulk for those compositions.

36 MATERIALS SCIENCE↗

Investigation of LSM-YSZ Composite Cathode Performance Degradation with a Multistep Charge Transfer Model

The long-term performance degradation of LSM/YSZ composite cathodes is investigated via calibrated multiphysics simulation with a multistep oxygen reduction reaction (ORR) model and structural coarsening data from a phase field study. Multiphysics simulations, including a multistep ORR mechanism, are first developed for better understanding of the limiting processes in solid oxide fuel cells. The multistep ORR mechanism includes two parallel pathways, surface pathway and bulk pathway, which consist of elementary reaction steps. The multiphysics model is simultaneously calibrated with experimental polarization curves and impedance behavior for various air/fuel supply conditions. To our knowledge, this is the first time that a multistep ORR model is calibrated with such datasets. Next, the calibrated simulations are utilized to simulate a 2D half-cell constructed with measured microstructural data and random heterogeneity. Finally, the long-term performance degradation of the half-cell is predicted by the calibrated multiphysics model coupled with structural coarsening trends simulated using a phase field-based coarsening model. Degradation of both polarization curves and impedance behavior is investigated. Thorough analyses, including changes of contributions from different pathways, the resistance components, and overall reaction order, are performed to provide more insights into cathode performance degradation due to grain coarsening phenomena.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comprehensive study of the interactions between the critical dimensionless numbers associated with multiphase flow in 3D porous media

Multiphase flow in porous media is of signifcant interest in many engineering applications, such as geologic carbon sequestration, enhanced oil recovery, and groundwater contamination and remediation. In order to advance the fundamental understanding of multiphase flow in complex three-dimensional (3D) porous media, the interactions between the critical dimensionless numbers, including the contact angle, viscosity ratio, and capillary (Ca) number, were explored using X-ray micro-computed tomography (micro-CT) scanning and lattice Boltzmann (LB) modeling. In this study, the 3D pore structure information was extracted from micro-CT images and then used as interior boundary conditions of flow modeling in a pore-scale LB simulator to simulate multiphase flow within the pore space. A Berea sandstone sample was scanned and then two-phase flow LB simulations were performed based on the micro-CT images. The LB-simulated water/CO 2 distributions agreed well with the micro-CT scanned images. Simulation findings showed that a decreasing contact angle causes a decrease in wetting-fluid relative permeability and an increase in non-wetting fluid relative permeability. A rising Ca number increases both wetting and non-wetting fluid relative permeabilities. An increasing viscosity ratio (the ratio of non-wetting fluid viscosity to wetting fluid viscosity) facilitates the increase of non-wetting fluid relative permeability and mitigates the reduction of wetting fluid relative permeability, when the contact angle decreases continuously. The primary novel finding of this study is that the viscosity ratio affects the rate of change of the relative permeability curves for both phases when the contact angle changes continuously. To date, we believe it is the first time that comprehensive interactions between these dimensionless numbers are demonstrated in a sandstone sample based on real 3D structures. We also investigated the role of the changes of flow direction and sample location on relative permeability curves. Simulation results showed that the change in non-wetting fluid relative permeability was larger when the flow direction was switched from vertical to horizontal, which indicated that there was stronger anisotropy in larger pore networks that were primarily occupied by the non-wetting fluid.

42 ENGINEERING↗

Influence of Ductility on the Performance of Lunar Habitat Structures Under Recurrent Disturbances

This research examines how ductility affects the durability of lunar surface structures against recurring disturbances like moonquakes, micrometeorite impacts, and thermal cycles over an extended period. The structural performance at various levels of ductility was determined by adjusting material parameters and the thickness of a reference multilayered dome structure. Moonquake and micrometeorite impact-induced lateral displacements were estimated using a reduced-order model under a control-oriented dynamic computational modeling framework. The study considered the degradation of the metallic dome’s strength properties over time due to thermal cycles. Fragility curves were generated by assessing the likelihood of reaching three predefined damage levels as a result of multiple hazards. Additionally, a discounted cash flow analysis was conducted to incorporate a financial aspect into the performance comparison. The findings revealed that structures with sufficient ductility capacity have a lower probability of sustaining severe damage or collapsing within a shorter time frame. Hence, having ductile structures in lunar environments is advantageous as it allows the postponement of maintenance and repair actions, thereby conserving scarce resources for more urgent tasks. Moreover, the financial analysis demonstrated that lunar habitats with higher ductile capacities result in larger net present values, offering a higher return on the initial investment.

Arsalan Majlesi↗

Structural Basis for Metallic-Like Conductivity in Microbial Nanowires

Direct measurement of multiple physical properties of Geobacter sulfurreducens pili have demonstrated that they possess metallic-like conductivity, but several studies have suggested that metallic-like conductivity is unlikely based on the structures of the G. sulfurreducens pilus predicted from homology models. In order to further evaluate this discrepancy, pili were examined with synchrotron X-ray microdiffraction and rocking-curve X-ray diffraction. Both techniques revealed a periodic 3.2-Å spacing in conductive, wild-type G. sulfurreducens pili that was missing in the nonconductive pili of strain Aro5, which lack key aromatic acids required for conductivity. The intensity of the 3.2-Å peak increased 100-fold when the pH was shifted from 10.5 to 2, corresponding with a previously reported 100-fold increase in pilus conductivity with this pH change. These results suggest a clear structure-function correlation for metallic-like conductivity that can be attributed to overlapping π-orbitals of aromatic amino acids. A homology model of the G. sulfurreducens pilus was constructed with a Pseudomonas aeruginosa pilus model as a template as an alternative to previous models, which were based on a Neisseria gonorrhoeae pilus structure. This alternative model predicted that aromatic amino acids in G. sulfurreducens pili are packed within 3 to 4 Å, consistent with the experimental results. Thus, the predictions of homology modeling are highly sensitive to assumptions inherent in the model construction. Finally, the experimental results reported here further support the concept that the pili of G. sulfurreducens represent a novel class of electronically functional proteins in which aromatic amino acids promote long-distance electron transport.

36 MATERIALS SCIENCE↗

The effect of chain stiffness and salt on the elastic response of a polyelectrolyte

Here, We present simulations of the force-extension curves of strong polyelectrolytes with varying intrinsic stiffness as well as specifically treating hyaluronic acid, a polyelectrolyte of intermediate stiffness. Whereas fully flexible polyelectrolytes show a high-force regime where extension increases nearly logarithmically with force, we find that the addition of even a small amount of stiffness alters the short-range structure and removes this logarithmic elastic regime. This further confirms that the logarithmic regime is a consequence of the short-ranged “wrinkles” in the flexible chain. As the stiffness increases, the force-extension curves tend toward and reach the wormlike chain behavior. Using the screened Coulomb potential and a simple bead-spring model, the simulations are able to reproduce the hyaluronic acid experimental force-extension curves for salt concentrations ranging from 1 to 500 mM. Furthermore, the simulation data can be scaled to a universal curve like the experimental data. The scaling analysis is consistent with the interpretation that, in the low-salt limit, the hyaluronic acid chain stiffness scales with salt with an exponent of –0.7, rather than either of the two main theoretical predictions of –0.5 and –1. Furthermore, given the conditions of the simulation, we conclude that this exponent value is not due to counterion condensation effects, as had previously been suggested.

36 MATERIALS SCIENCE↗

Diabatic Valence-Hole Concept

A global diabatization scheme, based on the “valence-hole” concept, has been previously applied to model webs of avoided crossings that exist in four electronic-state symmetry manifolds of C 2 ( 1 Π g , 3 Π g , 1 Σ u + , and 3 Σ u + ). Here, this model is extended to the electronically excited states of four more molecules: CN ( 2 Σ + ), N 2 ( 3 Π u ), SiC ( 3 Π), and Si 2 ( 3 Π g ). Many strangenesses in the spectroscopic observations (e.g., energy level structure, predissociation linewidths, and radiative lifetimes) for all four electronic state systems discussed here are accounted for by this unified model. The key concept of the model is valence-hole electron configurations: 3σ 2 4σ 1 1π 4 5σ 2 in CN ( 2 Σ + ), 2σ g 2 2σ u 1 1π u 4 3σ g 2 1π g 1 in N 2 ( 3 Π u ), 5σ 2 6σ 1 7σ 2 2π 3 in SiC ( 3 Π), and 4σ g 2 4σ u 1 5σ g 2 2π u 3 in Si 2 ( 3 Π g ), all of which have a triply occupied “valence-core” (i.e., 2σ g 2 2σ u 1 or the equivalent). These valence-hole configurations have a nominal bond order of three or higher and correlate with high-energy separated-atom limits with an np ← ns (n = 2, 3) promotion in one of the atomic constituents. On its way to dissociation, the strongly bound diabatic valence-hole state crosses multiple weakly bound or repulsive states, which belong to electron configurations with a completely filled valence-core. These curve crossings between diabatic potentials result in a network of many avoided crossings among multiple electronic states, analogous to the well-studied electronic structure landscape of ionic-covalent crossings in strongly ionic molecules. In conclusion, considering the unique role of valence-hole states in shaping the global electronic structure, the valence-hole concept should be added to our intuitive framework of chemical bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Linear systems with structure group and their feedback invariants

A general method described by Hermann and Martin (1976) for the study of the feedback invariants of linear systems is considered. It is shown that this method, which makes use of ideas of topology and algebraic geometry, is very useful in the investigation of feedback problems for which the classical methods are not suitable. The transfer function as a curve in the Grassmanian is examined. The general concepts studied in the context of specific systems and applications are organized in terms of the theory of Lie groups and algebraic geometry. Attention is given to linear systems which have a structure group, linear mechanical systems, and feedback invariants. The investigation shows that Lie group techniques are powerful and useful tools for analysis of the feedback structure of linear systems.

Martin, C.↗

The band structure and photocatalytic mechanism of MoS2-modified C3N4 photocatalysts with improved visible photocatalytic activity

Highlights: • A series of MoS{sub 2}/g-C{sub 3}N{sub 4} photocatalyst were prepared by water exfoliation method. • The heterojunction enhanced the visible response and separated charge carriers. • The MoS{sub 2}/g-C{sub 3}N{sub 4} exhibits enhanced visible photocatalytic activity. - Abstract: A series of MoS{sub 2}/g-C{sub 3}N{sub 4} photocatalysts were prepared by modifying g-C{sub 3}N{sub 4} with different concentration of MoS{sub 2} via a water exfoliation method. The crystal structure, morphology, band structure of heterojunction, behaviors of charge carries and the redox ability were characterized by XRD, HR-TEM, absorption spectra, XPS, PL, cyclic voltammetry curves and transient photocurrent spectra. It is revealed that the introduction of MoS{sub 2} on the surface of g-C{sub 3}N{sub 4} nanosheets to form micro-heterojunction could enhance the visible response and separate photogenerated charge carriers effectively. Moreover, the ability of the photocatalyst for generating reactive oxygen species (ROS, such as O{sub 2}{sup −} and OH) was also investigated. Therefore, MoS{sub 2}/g-C{sub 3}N{sub 4} samples exhibit better photocatalytic performance for the photodegradation of HCHO than g-C{sub 3}N{sub 4} and MoS{sub 2} under visible irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗