Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CURRENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

On the behavior of plasma with a negative current in the L-2M stellarator

The behavior of plasma with a negative current in the range of 5 kA ≤ vertical bar J vertical bar ≤ 16 kA in the L-2M stellarator is studied. Plasma is created and heated by means of electron cyclotron resonance heating (ECRH). Here, the definition “negative” stands for a toroidal current directed in such a way that it reduces the initial rotational transform µ in absolute value. It is shown that, only at relatively small values of the negative current ( vertical bar J vertical bar ∼ 6 kA), the increase in the shear leads to a reduction in electromagnetic turbulence. As vertical bar J vertical bar rises, the average level of magnetic fluctuations in the stationary phase of the discharge gradually increases. After ECRH is switched off (i.e., when plasma cools down), there is a time interval in which the amplitude of magnetic field fluctuations increases. No coherent three-dimensional modes (e.g., double tearing modes) that could accompany the penetration of the current into the plasma were observed. As for axisymmetric perturbations with m ≠ 0, analysis of the experimental data shows that they are absent at vertical bar J vertical bar ≤ 8 kA, appear in some discharges at vertical bar J vertical bar = 9 kA, and are observed in each discharge at vertical bar J vertical bar ≥ 10 kA. The frequency of these oscillations is on the order of 10 kHz, the poloidal mode number is m = 2, and the duration is 4–6 ms. The absence of oscillations with m = 1 and the small value of the external magnetic field for the m = 2 perturbation indicate that the radial size of the magnetic island is less than 1 cm. This, in turn, suggests that the radial profile of the plasma current changes with increasing vertical bar J vertical bar.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Formation of a spark discharge in an inhomogeneous electric field with current limitation by a large ballast Resistance

Results of studies of a spark discharge initiated in argon in a point–plane electrode gap with limitation of the discharge current by a large ballast resistance are presented. It is shown that the current flowing through the plasma channel of such a low-current spark has the form of periodic pulses. It is experimentally demonstrated that, when a low-current spark transforms into a constricted glow discharge, current pulses disappear, the spatial structure of the cathode glow changes abruptly, and a brightly glowing positive plasma column forms in the gap.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic effects on the currents determining the stability of a magnetic island in tokamaks

The role of the bootstrap and polarization currents for the stability of neoclassical tearing modes is investigated employing both a drift kinetic and a gyrokinetic approach. The adiabatic response of the ions around the island separatrix implies, for island widths below or around the ion thermal banana width, density flattening for islands rotating at the ion diamagnetic frequency, while for islands rotating at the electron diamagnetic frequency the density is unperturbed and the only contribution to the neoclassical drive arises from electron temperature flattening. As for the polarization current, the full inclusion of finite orbit width effects in the calculation of the potential developing in a rotating island leads to a smoothing of the discontinuous derivatives exhibited by the analytic potential on which the polarization term used in the modeling is based. This leads to a reduction of the polarization-current contribution with respect to the analytic estimate, in line with other studies. Other contributions to the perpendicular ion current, related to the response of the particles around the island separatrix, are found to compete or even dominate the polarization-current term for realistic island rotation frequencies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determination of plasma density from data on the ion current to cylindrical and planar probes

To improve probe methods of plasma diagnostics, special probe measurements were performed and numerical models describing ion transport to a probe with allowance for collisions were developed. The current–voltage characteristics of cylindrical and planar probes were measured in an RF capacitive discharge in argon at a frequency of 81 MHz and plasma densities of 10{sup 10}–10{sup 11} cm{sup –3}, typical of modern RF reactors. 1D and 2D numerical models based on the particle-in-cell method with Monte Carlo collisions for simulating ion motion and the Boltzmann equilibrium for electrons are developed to describe current collection by a probe. The models were used to find the plasma density from the ion part of the current–voltage characteristic, study the effect of ion collisions, and verify simplified approaches to determining the plasma density. A 1D hydrodynamic model of the ion current to a cylindrical probe with allowance for ion collisions is proposed. For a planar probe, a method to determine the plasma density from the averaged numerical results is developed. A comparative analysis of different approaches to calculating the plasma density from the ion current to a probe is performed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Operation of a semiconductor opening switch at ultrahigh current densities

The operation of a semiconductor opening switch (SOS diode) at cutoff current densities of tens of kA/cm{sup 2} is studied. In experiments, the maximum reverse current density reached 43 kA/cm{sup 2} for {approx}40 ns. Experimental data on SOS diodes with a p{sup +}-p-n-n{sup +} structure and a p-n junction depth from 145 to 180 {mu}m are presented. The dynamics of electron-hole plasma in the diode at pumping and current cutoff stages is studied by numerical simulation methods. It is shown that current cutoff is associated with the formation of an electric field region in a thin ({approx}45 {mu}m) layer of the structure's heavily doped p-region, in which the acceptor concentration exceeds 10{sup 16} cm{sup -3}, and the current cutoff process depends weakly on the p-n junction depth.

36 MATERIALS SCIENCE↗

Electric Currents Induced in Plasma by Ion-Acoustic Solitons: Allowance for Trapped Electrons

The currents induced by ion-acoustic solitons have been studied in a two-component magnetic–hydrodynamic approximation (MHD model) taking into account the trapped electrons. The solitons have been shown to excite unipolar nonpolar pulses of the ion and electron currents, and the established mechanisms of their excitation are. The spatiotemporal characteristics of the current pulses have been calculated, and the requirements for the spatiotemporal resolution of the experimental equipment necessary for detection of plasma currents induced by solitons have been determined. It has been shown that the solitons are the effective mechanism of plasma current generation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

TRANSP-based closed-loop simulations of current profile optimal regulation in NSTX-Upgrade

Active control of the toroidal current density profile is critical for the upgraded National Spherical Torus eXperiment device (NSTX-U) to maintain operation at the desired high-performance, MHD-stable, plasma regime. Initial efforts towards current density profile control have led to the development of a control-oriented, physics-based, plasma-response model, which combines the magnetic diffusion equation with empirical correlations for the kinetic profiles and the non-inductive current sources. The developed control-oriented model has been successfully tailored to the NSTX-U geometry and actuators. Moreover, a series of efforts have been made towards the design of model-based controllers, including a linear-quadratic-integral optimal control strategy that can regulate the current density profile around a prescribed target profile while rejecting disturbances. In this work, the tracking performance of the proposed current-profile optimal controller is tested in numerical simulations based on the physics-oriented code TRANSP. These high-fidelity closed-loop simulations, which are a critical step before experimental implementation and testing, are enabled by a flexible framework recentlydeveloped to perform feedback control design and simulation in TRANSP.

current profile control↗

Optical current generation in graphene: CEP control vs. ω + 2 ω control

The injection of directional currents in solids with strong optical fields has attracted tremendous attention as a route to realize ultrafast electronics based on the quantum-mechanical nature of electrons at femto- to attosecond timescales. Such currents are usually the result of an asymmetric population distribution imprinted by the temporal symmetry of the driving field. Here we compare two experimental schemes that allow control over the amplitude and direction of light-field-driven currents excited in graphene. Both schemes rely on shaping the incident laser field with one parameter only: either the carrier-envelope phase (CEP) of a single laser pulse or the relative phase between pulses oscillating at angular frequencies ω and 2ω, both for comparable laser parameters. We observe that the efficiency in generating a current via two-color-control exceeds that of CEP control by more than two orders of magnitude (7 nA vs. 18 pA), as the ω + 2ω field exhibits significantly more asymmetry in its temporal shape. We support this finding with numerical simulations that clearly show that two-color current control in graphene is superior, even down to single-cycle pulse durations. We expect our results to be relevant to experimentally access fundamental properties of any solid at ultrafast timescales, as well as for the emerging field of petahertz electronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pushing Particles with Waves: Current Drive and α -Channeling

It can be advantageous to push particles with waves in tokamaks or other magnetic confinement devices, relying on wave-particle resonances to accomplish specific goals. Waves that damp on electrons or ions in toroidal fusion devises can drive currents if the waves are launched with toroidal asymmetry. Theses currents are important for tokamaks, since they operate in the absence of an electric field with curl, enabling steady state operation. The lower hybrid wave and the electron cyclotron wave have been demonstrated to drive significant currents. Non-inductive current also stabilizes deleterious tearing modes. Waves can also be used to broker the energy transfer between energetic alpha particles and the background plasma. Alpha particles born through fusion reactions in a tokamak reactor tend to slow down on electrons, but that could take up to hundreds of milliseconds. Before that happens, the energy in these alpha particles can destabilize on collisionless timescales toroidal Alfven modes and other waves, in a way deleterious to energy confinement. However, it has been speculated that this energy might be instead be channeled instead into useful energy, that heats fuel ions or drives current. Furthermore, an important question is the extent to which these effects can be accomplished together.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Current drive in recombining plasma

The Langevin equations describing the average collisional dynamics of suprathermal particles in nonstationary plasma remarkably admit an exact analytical solution in the case of recombining plasma. The current density produced by arbitrary particle fluxes is derived including the effect of charge recombination. Since recombination has the effect of lowering the charge density of the plasma, thus reducing the charged particle collisional frequencies, the evolution of the current density can be modified substantially compared to plasma with fixed charge density. The current drive efficiency is derived and optimized for discrete and continuous pulses of current, leading to the discovery of a nonzero “residual” current density that persists indefinitely under certain conditions, a feature not present in stationary plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Current Density and Plasma Displacement Near Perturbed Rational Surface

The current density in the vicinity of a rational surface of a force-free magnetic field subjected to an ideal perturbation is shown to be the sum of both a smooth and a delta-function distribution, which give comparable currents. The maximum perturbation to the smooth current density is comparable to a typical equilibrium current density and the width of the layer in which the current flows is shown to be proportional to the perturbation amplitude. In the standard linearized theory, the plasma displacement has an unphysical jump across the rational surface, but the full theory gives a continuous displacement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of polarization-reversed EMIC waves on the ring current dynamics

Electromagnetic ion cyclotron (EMIC) waves are widely believed to play an important role in influencing the radiation belt and ring current dynamics. Most studies have investigated the effects or characteristics of EMIC waves by assuming their left-handed polarization. However, recent studies have found that the reversal of polarization, which occurs at higher latitudes along the wave propagation path, can change the wave-induced pitch angle diffusion coefficients. Whether such a polarization reversal can influence the global ring current dynamics remains unknown. In this study, we investigate the ring current dynamics and proton precipitation loss in association with polarization-reversed EMIC waves by using the ring current–atmosphere interactions model (RAM). The results indicate that the polarization reversal of H-band EMIC waves can truly decrease the scattering rates of protons of 10 to 50 keV or >100 keV in comparison with the scenario in which the EMIC waves are considered purely left-handed polarized. Additionally, the global ring current intensity and proton precipitation may be slightly affected by the polarization reversal, especially during prestorm time and the recovery phase, but the effects are not large during the main phase. This is probably because the H-band EMIC waves contribute to the proton scattering loss primarily at E < 10 keV, an energy range that is not strongly affected by the polarization reversal.

79 ASTRONOMY AND ASTROPHYSICS↗

Improved Biomass Deacetylation and Deconstruction using a Continuous Counter-Current Reactor

Deacetylation and Mechanical Refining (DMR) process is an emerging technology that successfully demonstrated the capability to produce high titer, higher yield, low toxicity sugar and tractable lignin streams at low temperature atmospheric pressure conditions. Previous work has been performed all in batch stirred tank reactors with the scale up to 100kg/day. In this work we have adapted a shaftless inclined screw reactor to perform counter current deacetylation. Continuous counter-current extraction is practiced at the industrial scale in pulping processes to recycle the black liquor at high pressures/temperatures, enabling effective mass and heat transfer to achieve high lignin removal and efficient water/energy usages. Counter-current process steps enable high concentrations of the target compounds to be extracted into the extraction solvent and result in low residual content of the target compound in the extracted residue to increase efficiency and downstream product yields, while keeping the equipment more compact and decreased footprint dimensions compared to batch stirred tank reactors. Preliminary results have shown improved sugar yield in enzymatic hydrolysis at low enzyme loadings for the continuous counter-current deacetylation/mechanical refining process compared to the currently used batch process, while xylan losses into the black liquor are reduced up to 2/3.

09 BIOMASS FUELS↗

A Comprehensive Assessment Tool for Low-TRL Current Energy Converters: Preprint

Along with a market-competitive levelized cost of energy, a current energy converter technology strongly benefits from an extensive consideration of socioeconomic, environmental, and regulatory factors early in the design process. As part of a technology performance level assessment, a series of assessment questions and guidance are developed and presented to evaluate an early-stage current energy technology on holistic criteria considering the entire device lifecycle. The assessment represents an accumulation of industry and research experience to date and relies on regular updates to ensure alignment with industry best-practices, regulatory requirements, and up-to-date technical understanding. A cradle-to-grave (materials, manufacturing, installation and deployment, operations and maintenance, and end-of-life) assessment of capabilities and functional requirements for tidal, river, and ocean current technologies has been completed. This work presents the evaluation questions and qualitative performance criteria for current energy converters deployed in tidal, ocean current, and/or river applications. Key considerations related to manufacturing and installation include supply chain robustness, manufacturability and related job creation in the end-user and/or adjacent communities, and the time-to-repayment of the embodied energy debt. During deployment and maintenance operations, the safety of the device and subsystems during disconnect or grid failure, the difficulty and frequency of offshore heavy-lift activities, the avoidance or mitigation of area use conflicts, the sea-states and weather conditions that permit maintenance access, and the availability of contingency plans (should conditions change unexpectedly) are a portion of the considered assessment criteria. Results include the potential impact of early-stage design decisions on the socioeconomic, environmental, and regulatory performance of a technology that allows developers to increase the product value and probability of success, and minimize costly late-stage design iterations through early and broad consideration of factors affecting overall performance and acceptability.

industry support↗

Efficient Modeling of Floating Wind Arrays Including Current Loads and Seabed Bathymetry: Preprint

Capabilities for modeling the effects of seabed bathymetry and current drag loads on a floating wind farm are now available in an open-source model for quasi-static analysis. In this model, mooring lines and dynamic cables are represented by a quasistatic solver that can quickly represent complex mooring/cabling arrangements and arrays of floating bodies. To account for seabed bathymetry, we expand the model to include a surface mesh that captures changes in water depth over a rectangular grid. We formulate modifications to the catenary equations that capture a mooring line's profile and tensions when contacting a slope seabed. To account for current drag loads on mooring lines and dynamic cables, we formulate a novel technique that rotates the reference frame so that the vector sum of the the weight and the current force are used in the catenary equations, while accounting for the seabed orientation. To complete the system, current drag loads on floating substructures are handled by inclusion of strip-theory drag calculations. These new capabilities are verified by comparing with results from the established offshore dynamics models MoorDyn and OrcaFlex in equivalent steady-state scenarios. The results show very good agreement for both sloped seabeds and current loads. With computation times of the quasi-static model typically under one second, the model additions are a useful capability toward rapidly evaluating a floating wind array's response to environmental loads under realistic site conditions.

bathymetry↗

Driving toroidally asymmetric current through the tokamak scrape-off layer, Part II: Magnetic field structure and spectrum

The structure of the magnetic field perturbations due to non-axisymmetric field-aligned currents in the tokamak scrape-off layer (SOL) are analytically calculated near the X-point. Part I [I. Joseph, et al., submitted to Phys. Plasmas (2008)] demonstrated that biasing divertor target plates in a toroidally asymmetric fashion can generate an appreciable toroidally asymmetric parallel current density in the SOL along the separatrix. Here, the magnetic field perturbation caused by a SOL current channel of finite width and step-wise constant amplitude at the target plate is derived. Flux expansion amplifies the magnetic perturbation near the X-point, while phase interference causes the SOL amplitude to be reduced at large toroidal mode number. Far enough from the current channel, the magnetic field can be approximated as arising from a surface current near the separatrix with differing amplitudes in the SOL and the divertor leg. The perturbation spectrum and resonant components of this field are computed analytically asymptotically close to the separatrix in magnetic flux coordinates. The size of the stochastic layer due to the applied perturbation that would result without self-consistent plasma shielding is also estimated. If enough resonant field is generated, control of the edge pressure gradient may allow stabilization of edge localized modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Driving toroidally asymmetric current through the tokamak scrape-off layer, Part I: Potential for ELM suppression

A potential technique for suppressing edge localized magnetohydrodynamic instabilities (ELMs) is theoretically analyzed. Recent experiments have shown that externally generated resonant magnetic perturbations (RMPs) can stabilize ELMs by modifying the density profile [T. E. Evans, et al., Nature Phys. 2, 419 (2006); Y. Liang, et al., Phys. Rev. Lett. 98, 265004 (2007)]. Driving toroidally asymmetric current internally, through the scrape-off layer (SOL) plasma itself, can also generate RMPs that are close to the required threshold for ELM control. The limiting ion saturation current densities can be achieved by producing potential differences on the order of the electron temperature. Although the threshold is uncertain in future devices, if driven coherently though the SOL, the upper limit for the resulting field would exceed the present experimental threshold. This analysis provides the tools required for estimating the magnitude of the coherent SOL current and RMP generated via toroidally asymmetric biasing of the target. Flux expansion increases the RMP near the X-point, while phase interference due to the shearing of field lines near the X-point reduces the amplitude of the effective SOL perturbation and makes the result sensitive to both toroidal mode number n and the radial coherence width of the biasing region. If the limiting current density decays rapidly enough radially, both the width and the amplitude of the current density drawn from the target will be reduced. The RMP can still exceed the present threshold at low n if the radial location and width of the biasing region are optimally chosen.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimization of Compact Microwave Ion Source for Generation of High Current and Low Energy Ion Beam

The purpose of the present study is to obtain a 0.5 keV Ar{sup +} beam with a current of hundreds {mu}A for space charge neutralization experiment. 0.5 keV Ar{sup +} beam with a current of 127 {mu}A was obtained by optimization of compact microwave ion source, and the divergence of the generated ion beam due to its space charge was investigated. As a result, the ratio of transported ion current for 700 mm within the diameter of 160 mm to the generated ion current was 0.41.

43 PARTICLE ACCELERATORS↗