Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boundary layer flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Large-eddy simulation of helical- and straight-bladed vertical-axis wind turbines in boundary layer turbulence

Here, turbulent wake flows behind helical- and straight-bladed vertical axis wind turbines (VAWTs) in boundary layer turbulence are numerically studied using the large-eddy simulation (LES) method combined with the actuator line model. Based on the LES data, systematic statistical analyses are performed to explore the effects of blade geometry on the characteristics of the turbine wake. The time-averaged velocity fields show that the helical-bladed VAWT generates a mean vertical velocity along the center of the turbine wake, which causes a vertical inclination of the turbine wake and alters the vertical gradient of the mean streamwise velocity. Consequently, the intensities of the turbulent fluctuations and Reynolds shear stresses are also affected by the helical-shaped blades when compared with those in the straight-bladed VAWT case. The LES results also show that reversing the twist direction of the helical-bladed VAWT causes the spatial patterns of the turbulent wake flow statistics to be reversed in the vertical direction. Moreover, the mass and kinetic energy transports in the turbine wakes are directly visualized using the transport tube method, and the comparison between the helical- and straight-bladed VAWT cases show significant differences in the downstream evolution of the transport tubes.

17 WIND ENERGY↗
NASA NTRS1991

User's manual for the Langley boundary layer noise propagation program (MRS-BLP)

A computer program, McAninch-Rawls-Spence Boundary Layer Propagation (MRS-BLP), is described. This program models the refractive and scattering effects on acoustic pressure waves propagating through a boundary layer encompassing an aircraft's fuselage. The noise source is assumed known and generated by a propeller. The fuselage is represented by an infinitely long cylinder embedded in a longitudinal flow. By matching a numerical solution inside the boundary layer with an analytical solution outside the boundary layer, the program calculates the acoustic pressure at the surface of the cylinder given the incident field at the top of the boundary layer. The boundary layer flow velocity and sound speed profiles, as well as the boundary layer thickness may be specified by the user. A detailed description of the input parameters and how to execute the program is given. Example executions of MRS-BLP showing results are also included.

Spence, Peter L.↗
NASA NTRS1988

Boundary-layer control for drag reduction

Although the number of possible applications of boundary-layer control is large, a discussion is given only of those that have received the most attention recently at NASA Langley Research Center to improve airfoil drag characteristics. This research concerns stabilizing the laminar boundary layer through geometric shaping (natural laminar flow, NLF) and active control involving the removal of a portion of the laminar boundary layer (laminar flow control, LFC) either through discrete slots or a perforated surface. At low Reynolds numbers, a combination of shaping and forced transition has been used to achieve the desired run of laminar flow and control of laminar separation. In the design of both natural laminar flow and laminar flow control airfoils and wings, boundary layer stability codes play an important role. A discussion of some recent stability calculations using both incompressible and compressible codes is given.

Harvey, William D.↗
NASA NTRSDate not supplied

Implicit Large-Eddy Simulation of Axisymmetric and Asymmetric Turbulent Shock Wave Boundary Layer Interaction at Mach 2.5

High-speed inlet flows feature turbulent shock wave boundary layer interactions at supersonic Mach numbers. A canonical Mach 2.5 shock wave boundary layer interaction experiment at the NASA Glenn Research Center was designed for axisymmetric and asymmetric interactions depending on the placement of the shock generator. Four different wall-resolved implicit large-eddy simulations of the experiment were carried out at one-tenth of the Reynolds number of the experiment: (1) Two axisymmetric interactions with shock generator radii of 9.2% and 14.7% of the test section diameter and (2) two asymmetric interactions with 14.7% shock generator radius and shock generator centerline offsets of one-third and one-fourth of the test section radius. For the two axisymmetric interactions, various sub-domains upstream of the interaction, within the interaction, and downstream of the interaction were analyzed with the proper orthogonal decomposition. For all three regions, the dominant modes are streamwise coherent structures with Strouhal numbers based on separation length of 0.15 and below. Fourier spectra of the wall-pressure coefficient for the interaction region have peaks at Strouhal numbers based on separation length of 0.15 and 0.04. For the two asymmetric interactions, the streamwise extent of the separation varies considerably in the azimuthal direction. For both shock generator offsets, the interaction is strongest for the azimuthal location that is closest to the shock generator. Compared to the axisymmetric interaction, the streamwise extent of the separated flow region is noticeably reduced and a substantial crossflow is observed. Fourier analyses of the unsteady flow indicate low-frequency content f or the upstream part of the interaction which is more two-dimensional. Away from the upstream region, with increasing sweep angle and crossflow, the low-frequency content is diminished.

Computational Fluid Dynamics↗
NASA NTRS1982

Reverse draping of magnetic field lines in the boundary layer

An unexpected orientation of field lines has been found by ISEE satellite measurements of the earth magnetosphere boundary layer, perhaps indicating a reverse draping. Three-dimensional plasma flow measurements by ISEE 1 and 2 show the tailward flow in the boundary layer to have an equatorward component which suggests high-latitude plasma entry. Simultaneous magnetic field measurements with the two satellites during a boundary crossing sequence yielded data on the boundary layer electric currents and the boundary layer interface with plasma sheet and magnetosheath. The currents are found to be largely field-aligned, with intensities in the 0.03-0.06 microampere/sq m range.

Hones, E. W., Jr.↗
NASA NTRS1976

Turbulent viscous-shock-layer solutions with strong vorticity interaction

Numerical solutions of the viscous-shock-layer equations governing laminar and turbulent flows of a perfect gas and radiating and nonradiating mixtures of perfect gases in chemical equilibrium are presented for hypersonic flow over spherically blunted cones and hyperboloids. The results are compared with boundary-layer and inviscid flow-field solutions. The agreement with the inviscid flow field data is satisfactory. The agreement with boundary-layer solutions is good except in regions of strong vorticity interaction. In these flow regions, the viscous-shock-layer solutions appear to be more satisfactory than the boundary-layer solutions.

Anderson, E. C.↗
NASA NTRS1979

A new boundary-layer inviscid iteration technique for separated flow

A new viscous-inviscid iteration procedure is presented which is applicable to separated flows. The new procedure is simple, converges rapidly, and does not require numerical smoothing, at least in the cases computed thus far. Calculations are presented for both incompressible and compressible separated flow in the juncture region between an axisymmetric body and sting. The viscous computation is obtained with a recently developed inverse boundary-layer procedure which is no more complicated than a standard direct finite-difference boundary-layer technique. The inviscid computation is made with an axisymmetric transonic code called RAXBOD, in which surface injection is used to represent the viscous effects.

Carter, J. E.↗
NASA NTRS1988

The mean flow structure around and within a turbulent junction or horseshoe vortex. I - The upstream and surrounding three-dimensional boundary layer

An experimental study of the mean flow structure upstream, around, and in a turbulent junction or horseshoe vortex is presented for the case of an incompressible subsonic flow. Mean velocity field and turbulent kinetic energy field measurements (obtained with hot film anemometry) and local wall shear stress measurements are used to monitor the upstream and surrounding three-dimensional turbulent boundary layer-like flow away from separation. Freestream or edge velocity and floor static pressure results are reported.

Menna, J. D.↗
NASA NTRS1986

Numerical simulation of boundary layers. Part 2: Ribbon-induced transition in Blasius flow

The early three-dimensional stages of transition in Blasius boundary layers are studied by numerical solution of the Navier-Stokes equations. A finite-amplitude two-dimensional wave and random low-amplitude three-dimensional disturbances are introduced. Rapid amplification of the three-dimensional components is observed and leads to transition. For intermediate amplitudes of the two-dimensional wave the breakdown is of subharmonic type, and the dominant spanwise wave number increases with the amplitude. For high amplitudes the energy of the fundamental mode is comparable to the energy of the subharmonic mode, but never dominates it; the breakdown is of mixed type. Visualizations, energy histories, and spectra are presented. The sensitivity of the results to various physical and numerical parameters is studied. Agreement with experimental and theoretical results is discussed.

Spalart, P.↗
NASA NTRS2005

Intermittent Behavior of the Separated Boundary Layer along the Suction Surface of a Low Pressure Turbine Blade under Periodic Unsteady Flow Conditions

The paper experimentally and theoretically studies the effects of periodic unsteady wake flow and aerodynamic characteristics on boundary layer development, separation and re-attachment along the suction surface of a low pressure turbine blade. The experiments were carried out at Reynolds number of 110,000 (based on suction surface length and exit velocity). For one steady and two different unsteady inlet flow conditions with the corresponding passing frequencies, intermittency behaviors were experimentally and theoretically investigated. The current investigation attempts to extend the intermittency unsteady boundary layer transition model developed in previously to the LPT cases, where separation occurs on the suction surface at a low Reynolds number. The results of the unsteady boundary layer measurements and the intermittency analysis were presented in the ensemble-averaged and contour plot forms. The analysis of the boundary layer experimental data with the flow separation, confirms the universal character of the relative intermittency function which is described by a Gausssian function.

Oeztuerk, B↗
NASA NTRS1984

Simulation of transonic separated airfoil flow by finite difference viscous-inviscid interaction

A finite difference viscous inviscid interaction program has been developed for simulating the separated transonic flow about lifting airfoils, including the wake. In contrast to most interaction programs, this code combines a finite difference boundary layer algorithm with the inviscid program. The recently developed finite difference boundary layer code efficiently simulates attached and reversed compressible boundary layer and wake flows. New viscous inviscid interaction algorithms were also developed to couple the boundary layer code with the inviscid transonic full potential program. Transonic cases with shock induced and trailing edge separation are computed and compared with experimental and Navier-Stokes results.

Vandalsem, W. R.↗
NASA NTRS1972

A theoretical and experimental investigation of the hypersonic turbulent boundary layer subject to normal and longitudinal pressure gradients and cross flow along a windward plane of symmetry.

A theoretical and experimental investigation for the hypersonic turbulent boundary layer undergoing both normal and longitudinal pressure gradients and cross flow along the plane of symmetry on the windward side of a body of revolution is presented. The purpose of this investigation is to provide a method for calculating boundary layers that occur on the centerline of symmetry of an inlet. The three-dimensional compressible integral equations are written along the symmetry plane and integrated numerically, and the effect of the cross flow on the behavior of the boundary layer is also studied. The experiments were performed at Mach number 6 and Reynolds number of 44,000,000/ft for the axisymmetric case and for the case with cross flow. The velocity profiles and the boundary layer parameters agree relatively well with theoretical values with and without cross flow effects. The presence of the cross flow alters significantly the value of the profiles. Total temperature-velocity correlations deviate from the linear Crocco distribution. Heat transfer rates agree with theoretical values and values obtained by the flat plate reference enthalpy method. Cross flow influence on the heat transfer rates is of minor relevance.

Zakkay, V.↗
NASA NTRS1982

Computer program for solving laminar, transitional, or turbulent compressible boundary-layer equations for two-dimensional and axisymmetric flow

A numerical algorithm and computer program are presented for solving the laminar, transitional, or turbulent two dimensional or axisymmetric compressible boundary-layer equations for perfect-gas flows. The governing equations are solved by an iterative three-point implicit finite-difference procedure. The software, program VGBLP, is a modification of the approach presented in NASA TR R-368 and NASA TM X-2458, respectively. The major modifications are: (1) replacement of the fourth-order Runge-Kutta integration technique with a finite-difference procedure for numerically solving the equations required to initiate the parabolic marching procedure; (2) introduction of the Blottner variable-grid scheme; (3) implementation of an iteration scheme allowing the coupled system of equations to be converged to a specified accuracy level; and (4) inclusion of an iteration scheme for variable-entropy calculations. These modifications to the approach presented in NASA TR R-368 and NASA TM X-2458 yield a software package with high computational efficiency and flexibility. Turbulence-closure options include either two-layer eddy-viscosity or mixing-length models. Eddy conductivity is modeled as a function of eddy viscosity through a static turbulent Prandtl number formulation. Several options are provided for specifying the static turbulent Prandtl number. The transitional boundary layer is treated through a streamwise intermittency function which modifies the turbulence-closure model. This model is based on the probability distribution of turbulent spots and ranges from zero to unity for laminar and turbulent flow, respectively. Several test cases are presented as guides for potential users of the software.

Harris, J. E.↗
NASA NTRS2019

NASA Ames Unitary Plan Wind Tunnel: Infrared Flow Visualization

Infra-red thermography can visualize surface flow features including boundary layer transition, shock impingement, streamwise vortex impingement, flow separation, and buffet. The Infra-red thermography system at the NASA ARC Unitary Plan Wind Tunnel allows for continuous monitoring of wind tunnel models with up to four cameras simultaneously. For best results the models should be covered with a high emissivity coating, and the images processed to enhance contrast. However image processing algorithms allow some flow information to be recovered even from uncoated models.

Garbeff, Ted↗
NASA NTRS1993

Some practical turbulence modeling options for Reynolds-averaged full Navier-Stokes calculations of three-dimensional flows

New turbulence modeling options recently implemented for the 3-D version of Proteus, a Reynolds-averaged compressible Navier-Stokes code, are described. The implemented turbulence models include: the Baldwin-Lomax algebraic model, the Baldwin-Barth one-equation model, the Chien k-epsilon model, and the Launder-Sharma k-epsilon model. Features of this turbulence modeling package include: well documented and easy to use turbulence modeling options, uniform integration of turbulence models from different classes, automatic initialization of turbulence variables for calculations using one- or two-equation turbulence models, multiple solid boundaries treatment, and fully vectorized L-U solver for one- and two-equation models. Validation test cases include the incompressible and compressible flat plate turbulent boundary layers, turbulent developing S-duct flow, and glancing shock wave/turbulent boundary layer interaction. Good agreement is obtained between the computational results and experimental data. Sensitivity of the compressible turbulent solutions with the method of y(sup +) computation, the turbulent length scale correction, and some compressibility corrections are examined in detail. The test cases show that the highly optimized one-and two-equation turbulence models can be used in routine 3-D Navier-Stokes computations with no significant increase in CPU time as compared with the Baldwin-Lomax algebraic model.

Bui, Trong T.↗
NASA NTRS1939

Preliminary Report on Laminar-Flow Airfoils and New Methods Adopted for Airfoil and Boundary-Layer Investigations

Recent developments in airfoil-testing methods and fundamental air-flow investigations, as applied to airfoils, are discussed. Preliminary test results, obtained under conditions relatively free from stream turbulence and other disturbances, are presented. Suitable airfoils and airfoil-design principles were developed to take advantage of the unusually extensive laminar boundary layers that may be maintained under the improved testing conditions. The results are of interest mainly in range of below 6,000,000.

AIRFOILS - NACA 27-209-CHAR , A C , MOMENTS, C P &↗