Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Accelerator experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Materials experiment carrier concepts definition study. Volume 1: Executive summary, part 2

The materials experiment carrier (MEC) is an optimized carrier for near term and advanced materials processing in space (MPS) research and commercial payloads. When coupled with the space platform (SP), the MEC can provide the extended duration, high power and low acceleration environment the MPS payload typically requires. The lowest cost, technically reasonable first step MEC that meets the MPS program missions objectives with minimum programmatic risks is defined. The effectiveness of the initial MEC/space platform idea for accommodating high priority, multidiscipline, R&D and commercial MPS payloads, and conducting MPS payload oprations at affordable funding and acceptable productivity levels is demonstrated.

Source record↗

Studies of the mechanisms of turbine fuel instability

The formation of insoluble deposits in a Jet A, a Diesel, and a model fuel (1/10 v/v tetralin/dodecane) was studied. Experiments were conducted using glass containers at 394 K with an air/fuel ratio of 14/1. The effects of addition of ppm levels of various compounds on deposit formation were evaluated. Nitrogen heterocycles were shown to produce a basicity dependent acceleration of deposition. Thiols and thiophene were shown to increase deposition while sulfides and disulfides act as inhibitors. Copper metal and its salts also promote deposition. Results of various instrumental analyses of deposits and development of a high performance liquid chromatographic method for monitoring deposit precursors are discussed.

Daniel, S. R.↗

Detector calibration of the Indian cosmic ray experiment (IONS) in Space-Shuttle Spacelab-13

In the Indian cosmic ray experiment (IONS) in Spacelab-3 the intention is to study nuclei up to iron in low energy cosmic rays, using CR-39 (DOP) detectors. CR-39 (DOP) was exposed to He4, C12, O16, Ne20, Si28, Ar40, Cr52 and Fe56 accelerated beams from various accelerator facilities available around the world. Different beam energies and exposure angles were used. From these exposures, the charge resolution and energy resolution for the detector in the region of interest were studied. The effect of pre-annealing and depth on the response of our detector was studied. For isotopic resolution, exposed the detector samples were exposed to Ne2O and Ne22 accelerated beams. Samples of CR-39 (DOP) exposed to different accelerated heavy ions were kept in the detector module to take into account the effect of ambient conditions on detector response during the flight.

Yadav, J. S.↗

Electrochemical corrosion studies in low conductivity propellants

The Jet Propulsion Laboratory is investigating the possibility of developing advanced electrochemical techniques as accelerated compatibility tests for metal/propellant systems which overcome the problems associated with the low conductivity of the liquid propellants (e.g., hydrazines, nitrogen tetroxide). Both DC techniques and AC electrochemical impedance spectroscopy are being evaluated. Progress has been made in experiments involving stainless steel with hydrazine and nitrogen tetroxide propellants.

Blue, G. D.↗

Characterization of a 5-eV neutral atomic oxygen beam facility

An experimental effort to characterize an existing 5-eV neutral atomic oxygen beam facility being developed at Princeton Plasma Physics Laboratory is described. This characterization effort includes atomic oxygen flux and flux distribution measurements using a catalytic probe, energy determination using a commercially designed quadrupole mass spectrometer (QMS), and the exposure of oxygen-sensitive materials in this beam facility. Also, comparisons were drawn between the reaction efficiencies of materials exposed in plasma ashers, and the reaction efficiencies previously estimated from space flight experiments. The results of this study show that the beam facility is capable of producing a directional beam of neutral atomic oxygen atoms with the needed flux and energy to simulate low Earth orbit (LEO) conditions for real time accelerated testing. The flux distribution in this facility is uniform to +/- 6 percent of the peak flux over a beam diameter of 6 cm.

Vaughn, J. A.↗

A strategy for residual acceleration data reduction and dissemination

A data reduction plan is being developed to efficiently process residual acceleration data from orbiting space laboratories. Implementation of the reduction plan will result in a useful, manageable accelerometer data base which can be readily employed by principal investigators during post-flight analysis of experimental results. The data reduction plan will also assist in the characterization of the acceleration environment of orbiters, which is important for the planning of future experimental missions. Prototype versions of the reduction plan are being tested using accelerometer data recorded during the Spacelab 3 (SL3) mission. Transient disturbances caused by shuttle and experiment operations and crew activities are being cataloged. The magnitudes of such disturbances can be as much as 0.01 g, but are rarely sustained for more than a fraction of a second and tend to vary greatly in orientation. It is found that the recorded frequency components of the SL3 disturbances do not exceed tolerance limits determined from modeling for a selected experiment set.

Rogers, Melissa J. B.↗

Concept definition study for an extremely large aerophysics range facility

The development of a large aerophysical ballistic range facility is considered to study large-scale hypersonic flows at high Reynolds numbers for complex shapes. A two-stage light gas gun is considered for the hypervelocity launcher, and the extensive range tankage is discussed with respect to blast suppression, model disposition, and the sabot impact tank. A layout is given for the large aerophysics facility, and illustrations are provided for key elements such as the guide rail. The paper shows that such a facility could be used to launch models with diameters approaching 250 mm at velocities of 6.5 km/s with peak achievable accelerations of not more than 85.0 kgs. The envisioned range would provide gas-flow facilities capable of controlling the modeled quiescent atmospheric conditions. The facility is argued to be a feasible and important step in the investigation and experiment of such hypersonic vehicles as the National Aerospace Plane.

Swift, H.↗

EVA results of Shuttle Mission STS-37

The paper summarizes EVA results of the STS-37 mission that flew in April 1991, with emphasis on the unscheduled EVA to free the Compton GRO antenna. The EVA Development Flight Experiment (EDFE) objectives and equipment description are also presented. The EDFE consisted of three experiments conducted during STS-37 to evaluate both designs of crew translation equipment and loads imparted by crew members while performing typical EVA work site tasks for Space Station Freedom. The experiments were used to evaluate static and dynamic loads and ease of operation of four separate translation systems operating on a fixed track. Various measures of performance of the crew equipment and translation aids are discussed. The rates and accelerations experienced during translation aided by the manipulator foot restraint and remote manipulator system were found to be comfortable.

Whitsett, C. E.↗

Genetic and molecular dosimetry of HZE radiation (US-1 RADIAT)

In order to estimate radiation exposure in space, experiments were conducted during the 1st International Microgravity Laboratory (IML-1) mission in order to isolate genetic changes in animal cells caused by cosmic rays. The space measurements were evaluated against results from synthetic cosmic rays produced by particle accelerators on the ground. The biological material used was the tiny soil nematode, Caenorhabditis elegans. The measurements were made by thermoluminescent detectors and plastic nuclear track detectors. The development and the chromosome mechanics in microgravity were studied, and the mutagenesis induced by radiation exposure was analyzed. The results showed that there are no obvious differences in the development, behavior and chromosome mechanics, as a function of gravity unloading (reproduction, self-fertilization and mating of males with hermaphrodites, gross anatomy, symmetry and gametogenesis, pairing, disjoining and recombination of chromosomes). A variety of mutants were isolated, and it was noted that mutants isolated from regions of identified high particles were more severely affected than those isolated by random screening. Linear energy transfer particles seem to favor large scale genetic lesions.

Nelson, Gregory A.↗

Plans for Extreme Energy Cosmic Ray Observations from Space

Cosmic rays have been detected at energies beyond 10(exp 20) eV, where Universe is predicted to become opaque to protons. The acceleration of cosmic rays to such extreme energies in known astrophysical objects has also proven difficult to understand, leading to many suggestions that new physics may be required to explain their existence. This has prompted the construction of new experiments designed to detect cosmic rays with fluxes below 1 particle/km/century and follow their spectrum to even higher energies. To detect large numbers of these particles, the next generation of these experiments must be performed on space-based platforms that look on very large detection volumes in the Earth's atmosphere. The talk will review the experimental and theoretical investigations of extreme energy cosmic rays and discuss the present and planned experiments to extend measurements beyond 10(exp 21) eV.

Adams, James H., Jr.↗

Extracellular mass transport considerations for space flight research concerning suspended and adherent in vitro cell cultures

Conducting biological research in space requires consideration be given to isolating appropriate control parameters. For in vitro cell cultures, numerous environmental factors can adversely affect data interpretation. A biological response attributed to microgravity can, in theory, be explicitly correlated to a specific lack of weight or gravity-driven motion occurring to, within or around a cell. Weight can be broken down to include the formation of hydrostatic gradients, structural load (stress) or physical deformation (strain). Gravitationally induced motion within or near individual cells in a fluid includes sedimentation (or buoyancy) of the cell and associated shear forces, displacement of cytoskeleton or organelles, and factors associated with intra- or extracellular mass transport. Finally, and of particular importance for cell culture experiments, the collective effects of gravity must be considered for the overall system consisting of the cells, their environment and the device in which they are contained. This does not, however, rule out other confounding variables such as launch acceleration, on orbit vibration, transient acceleration impulses or radiation, which can be isolated using onboard centrifuges or vibration isolation techniques. A framework is offered for characterizing specific cause-and-effect relationships for gravity-dependent responses as a function of the above parameters.

Non-NASA Center↗

Spinoff 1977

The National Aeronautics & Space Administration has many missions but they can all be reduced to a common denominator: to explore Earth and its surroundings, conduct aeronautical research, and put the results to work for the benefit of mankind. At times the benefit may be dimly perceived. Take, for instance, last year's monumental triumph of exploration, the landing of robot spacecraft on Mars. How, some ask, does probing a neighbor planet improve the lot of Earth's people? In two ways: scientific gain and technological advancement. Though perhaps little understood, they are concrete benefits, assets as tangible as sunshine, more valuable than gold. Technological advancement, on the other hand, offers equally important but more immediate returns. Technology is science applied. It is the ability of a society to make things that improve the quality of human existence. It is compounded of intellect and skill, which draw upon the scientific base to bring forth new ideas, inventions, materials and processes. It is, in a word, knowledge. It builds like an inverted pyramid, each level broader than the one . before as successive generations contribute to the cumulative lore. Knowledge is readily transferable. If you build a better mousetrap, you may acquire experience in the course of the project that can be applied to a need totally unrelated to mouse-traping. This transfer process has been going on since the dawn of technology. In the last two decades it has accelerated enormously, spurred by the immense flow of aerospace-stimulated technology. There have been literally thousands of spinoffs, new products and processes that owe their origins to aerospace research. Collectively, they add up to significant gain in terms of personal convenience, human welfare, industrial efficiency, and economic value.

Haggerty, James J.↗

Exploring the Extreme Universe with the Fermi Gamma-Ray Space Telescope

In ways similar to experiments in nuclear and particle physics, high-energy astrophysics usesgamma rays and energetic charged particles toprobe processes that involve large energy transfers.Since its launch in 2008, the international Fermi Gamma-Ray Space Telescope has been exploringnatural particle accelerators and the interactionsof high-energy particles in the universe. Withsources ranging from thunderstorms on Earth to galaxies and exploding stars in distant parts of the cosmos, the telescopes subjects of study are almostas diverse as were those of the scientist whose name it bears.

extreme↗

CODA: Coordinated Observations of Dynamics in Aurora

The grant funds were provided to carry out chemical tracer wind and turbulence measurements in the mesosphere and lower thermosphere as part of the Coordinated Observations of Dynamics in Aurora (CODA) experiment for which Dr. Andy Christensen of the Aerospace Corp. was the Principal Investigator. Clemson University was a co-investigator institution on the project and was tasked with designing, building, and testing a total of four chemical tracer release payloads which were used to release trimethyl aluminum (TMA) to measure the winds and turbulent diffusion. All four payloads were flown from the rocket range at Poker Flat, Alaska, in support of instrumented payloads flown from the same location. The CODA experiment was designed to investigate the changes in the chemical composition in the lower thermosphere during an auroral substorm event. In particular, the objective was to determine the relative importance of two competing mechanisms. The first mechanism is associated with the advection of air from the polar cap into the auroral oval. A flow in that direction is typical in the postmidnight sector of the oval. As the air moves from the region of negligible forcing in the polar cap to the region of strong forcing and heating in the oval, changes in the composition are expected to occur. Alternatively, enhanced local mixing will also cause such changes. Since the auroral forcing accelerates the neutral winds in the lower E region, but not at lower altitudes, the forcing results in large shears that can be large enough to be unstable in the Richardson number sense. The unstable shears are expected to generate turbulence and therefore enhanced mixing. Such mixing will also create composition changes similar to what is observed. In the CODA experiment an instrumented payload designed and built by the Aerospace Corporation was used to measure the composition and plasma parameters needed to define the auroral forcing. In addition, three chemical tracer payloads were to be flown along three trajectories widely separated in azimuth to map out the winds and wind gradients. The measurements would thus provide information about the local composition changes above the launch site as well as detailed information about the advection and location of stable or unstable shears both locally and over a broader area in the vicinity of the launch site.

Larsen, M. F.↗

Large-Scale Mini-Magnetosphere Plasma Propulsion (M2P2) Experiments

Mini-Magnetosphere Plasma Propulsion (M2P2) is an innovative plasma propulsion system that has the potential to propel spacecraft at unprecedented speeds of 50 to 80 km per second with a low-power requirement of approx. 1 kW per 100 kg of payload and approx. 1 kg of neutral gas [fuel] consumption per day of acceleration. Acceleration periods from several days to a few months are envisioned. High specific impulse and efficiency are achieved through coupling of the spacecraft to the 400 km per second solar wind through an artificial magnetosphere. The mini-magnetosphere or inflated magnetic bubble is produced by the injection of cold dense plasma into a spacecraft-generated magnetic field envelope. Magnetic bubble inflation is driven by electromagnetic processes thereby avoiding the material and deployment problems faced by mechanical solar sail designs, Here, we present the theoretical design of M2P2 as well as initial results from experimental testing of an M2P2 prototype demonstrating: 1) inflation of the dipole magnetic field geometry through the internal injection of cold plasma; and 2) deflection of and artificial solar wind by the prototype M2P2 system. In addition, we present plans for direct laboratory measurement of thrust imparted to a prototype M2P2 by an artificial solar wind during the summer of 2001.

Winglee, R. M.↗

Using Existing NASA Satellites as Orbiting Testbeds to Accelerate Technology Infusion into Future Missions

One of the shared problems for new space mission developers is that it is extremely difficult to infuse new technology into new missions unless that technology has been flight validated. Therefore, the issue is that new technology is required to fly on a successful mission for flight validation. We have been experimenting with new technology on existing satellites by retrofitting primarily the flight software while the missions are on-orbit to experiment with new operations concepts. Experiments have been using Earth Observing 1 (EO-1), which is part of the New Millennium Program at NASA. EO-1 finished its prime mission one year after its launch on November 21,2000. From November 21,2001 until the present, EO-1 has been used in parallel with additional science data gathering to test out various sensor web concepts. Similarly, the Cosmic Hot Interstellar Plasma Spectrometer (CHIPS) satellite was also a one year mission flown by the University of Berkeley, sponsored by NASA and whose prime mission ended August 30,2005. Presently, CHIPS is being used to experiment with a seamless space to ground interface by installing Core Flight System (cFS), a "plug-and-play" architecture developed by the Flight Software Branch at NASA/GSFC on top of the existing space-to-ground Internet Protocol (IP) interface that CHIPS implemented. For example, one targeted experiment is to connect CHIPS to a rover via this interface and the Internet, and trigger autonomous actions on CHIPS, the rover or both. Thus far, having satellites to experiment with new concepts has turned out to be an inexpensive way to infuse new technology for future missions. Relevant experiences thus far and future plans will be discussed in this presentation.

Mandl, Daniel↗

Gravimetric geodesy and sea surface topography studies by means of satellite-to-satellite tracking and satellite altimetry

A satellite-to-satellite tracking experiment is planned between ATS-F and GEOS-C with a range accuracy of 2-meters and a range rate accuracy of 0.035 centimeters per second for a 10-second integration time. This experiment is planned for 1974. It is anticipated that it will improve the spatial resolution of the satellite geoid by half an order of magnitude to about 6 degrees. Longer integration times should also permit a modest increase in the acceleration resolution. Satellite altimeter data will also be obtained by means of GEOS-C. An overall accuracy of 5-meters in altitude is the goal. The altimeter, per se, is expected to have an instrumental precision of about 2 meters, and an additional capability to observe with a precision of about 0.2 meters for limited periods.

Siry, J. W.↗

The composition of ultra-heavy cosmic rays

Preliminary results on the composition of ultraheavy nuclei in the cosmic rays are now available from experiments on HEAO-3 and Ariel-VI satellites. These results are compared with the composition predicted for reasonable propagation models using source abundances similar to those of solar system material. The effects of varying model parameters and of preferential acceleration are discussed. Discrepancies between predicted and observed abundances are larger than can be accounted for solely by first ionization potential effects and are interpreted in terms of a nucleosynthesis process.

Protheroe, R. J.↗