Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Abstract”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

{delta}-Phase to defect fluorite (order-disorder) transition in the R{sub 2}O{sub 3}-MO{sub 2} (R = Sc, Tm, Lu; M = Zr, Hf) systems

Graphical abstract: Effect of rapid and slow cooling on the bulk conductivity of Ln{sub 4}Zr{sub 3}O{sub 12} (Ln = Tm, Lu). Arrhenius plots of bulk conductivity for (1, 2, 4, and 5) Tm{sub 4}Zr{sub 3}O{sub 12} and (3 and 6) Lu{sub 4}Zr{sub 3}O{sub 12}: (1 and 3) coprecipitation, rapid cooling; (2) mechanical activation, rapid cooling; (4 and 6) coprecipitation, slow cooling; (5) mechanical activation, slow cooling. Research highlights: {yields} We studied the R{sub 4}M{sub 3}O{sub 12} (R = Sc, Tm, Lu; M = Zr, Hf) and Ln{sub 2}Hf{sub 2}O{sub 7} (Ln = Dy, Lu) compounds prepared by different procedures (heat treatment after (1) mechanical activation of oxides and (2) co-precipitation). {yields} We have studied the {delta}-phase to defect fluorite F* (order-disorder) transition in the R{sub 4}M{sub 3}O{sub 12} (R = Sc, Tm, Lu; M = Zr, Hf) compounds using different cooling rates. {yields} The results show in the first time that the structure of Tm{sub 4}Zr{sub 3}O{sub 12} depends on cooling rate: defect fluorite (F*) after rapid cooling and rhombohedral ({delta}-phase) after slow cooling. The temperature of the {delta}-phase to defect fluorite (order-disorder) transition in this compound is {approx}1600 {sup o}C. {yields} The high-temperature conductivity of the rhombohedral phases {delta}-R{sub 4}Zr{sub 3}O{sub 12} (R = Sc, Tm, Lu) is lower than that of the fluorite-like phases: most of our {delta}-R{sub 4}Zr{sub 3}O{sub 12} samples have 740 {sup o}C conductivity in the range 10{sup -6} to 10{sup -5} S/cm. {yields} The temperature dependence of conductivity for {delta}-Sc{sub 4}Zr{sub 3}O{sub 12} is found for the first time to have an anomaly, which suggests that this compound undergoes a phase transition at 650-700 {sup o}C. -- Abstract: We have studied the {delta}-phase to defect fluorite F* (order-disorder) transition in the R{sub 4}M{sub 3}O{sub 12} (R = Sc, Tm, Lu; M = Zr, Hf) compounds. The temperature of the {delta}-F* phase transition in Tm{sub 4}Zr{sub 3}O{sub 12} is {approx}1600 {sup o}C. The rate of this transition in R{sub 4}Zr{sub 3}O{sub 12} (R = Sc, Tm, Lu) decreases markedly with decreasing difference in ionic radius between the R{sup 3+} and Zr{sup 4+}, leading to stabilization of the {delta}-phases R{sub 4}Zr{sub 3}O{sub 12} with R = Sc and Lu at high temperatures ({approx}1600 {sup o}C). During slow cooling (5 {sup o}C/h), the high-temperature defect fluorites F*-R{sub 2}Hf{sub 2}O{sub 7} (R = Tm, Lu) decompose reversibly to form the {delta}-phases R{sub 4}Hf{sub 3}O{sub 12}. Some of the materials studied exhibit microdomains formation effects, typical of the fluorite-related oxide compounds in the R{sub 2}O{sub 3}-MO{sub 2} (M = Ti, Zr, Hf) systems of the heavy rare earths. The high-temperature defect fluorites F*-R{sub 4}M{sub 3}O{sub 12} (R = Tm, Lu; M = Zr, Hf) as a rule contain antiphase microdomains of {delta}-R{sub 4}Zr{sub 3}O{sub 12}. After slow cooling (5 {sup o}C/h), such microdomains are large enough for the {delta}-phase to be detected by X-ray diffraction. The conductivity data for R{sub 4}M{sub 3}O{sub 12} (R = Sc, Tm, Lu; M = Zr, Hf) and Ln{sub 2}Hf{sub 2}O{sub 7} (Ln = Dy, Lu) prepared by different procedures show that the rhombohedral phases {delta}-R{sub 4}M{sub 3}O{sub 12} (R = Sc, Tm, Lu; M = Zr, Hf) are poorer conductors than the defect fluorites, with 740 {sup o}C conductivity from 10{sup -6} to 10{sup -5} S/cm. The conductivity drops with decreasing rare-earth ionic radius and, judging from the E{sub a} values obtained (1.04-1.37 eV), is dominated by oxygen ion transport. The highest conductivity, {approx}6 x 10{sup -4} S/cm at 740 {sup o}C, is offered by the rapidly cooled F*-Dy{sub 2}Hf{sub 2}O{sub 7}. In the fluorite homologous series, oxygen ion conductivity decreases in the order defect pyrochlore > defect fluorite > {delta}-phase.

36 MATERIALS SCIENCE↗

Synthesis and characterization of porous ZnO nanoparticles by hydrothermal treatment of as pure aqueous precursor

Graphical abstract: ZnO nanocrystals are predominately prepared by soft chemical methods such as sol-gel and hydrothermal. Although hydrothermal approach is very simple, complexing agents or mineralizers such as alkali metal hydroxide are generally used. There is always a high probability that these cations will be incorporated within the nanocrystals. Such unintentional doping is detrimental to the intrinsic property of the material and will impede its effective application. Here we report a very simple and effective hydrothermal approach to synthesize ZnO nanocrystal without employing any mineralizers. Research highlights: The manuscript reports synthesis of ZnO nanoparticle by simple thermal treatment of aqueous precursor without using any assisting mineralizing agent. The highlights of the findings are as follows: {yields} Aqueous synthesis of ZnO nanoparticles is demonstrated without using any mineralizer. {yields} The method minimizes the risk of unintentional doping due to mineralizers. {yields} The synthesized ZnO nanoparticles had a non-uniform mesoporous structure. {yields} The porous ZnO nanoparticls exhibited size dependent optical absorption. -- Abstract: The presence of the complexing agents in the growth solution poses risk of the unintentional doping in the synthesized product and hence is likely to adversely affect the intrinsic properties. Herein we report the synthesis of ZnO nanoparticles with porous microstructure using pure aqueous precursor. Crystalline ZnO nanoparticles were synthesized by thermal treatment of aqueous solution of zinc acetate in an open bath. The size of the nanocrystals was controlled by changing the initial precursor concentration. The structural and optical properties of the synthesized nanocrystals were analyzed by X-ray diffraction, high resolution transmission electron microscopy, UV-vis absorption and room temperature photoluminescence measurement techniques. The TEM and UV-vis spectral signature analyses confirmed the formation of dispersed single crystalline ZnO nanoparticles. The nanopowders were found to have disordered mesoporous structure. The synthesized nanocrystals exhibited characteristic band edge emission as well as to surface defect related deep level visible luminescence.

36 MATERIALS SCIENCE↗

Structural and dielectric properties of A(Fe{sub 1/2}Ta{sub 1/2})O{sub 3} [A = Ba, Sr, Ca]

Graphical abstract: FTIR spectra of BFT, SFT and CFT at room temperature. Research highlights: {yields} The structural and dielectric properties of BaFe{sub 1/2}Ta{sub 1/2}O{sub 3}, SrFe{sub 1/2}Ta{sub 1/2}O{sub 3} and CaFe{sub 1/2}Ta{sub 1/2}O{sub 3}. {yields} Fourier transform infrared spectra show two primary phonon modes of the samples at around 450 cm{sup -1} and 620 cm{sup -1}. {yields} The compounds show significant frequency dispersion in its dielectric properties. {yields} The relaxation mechanism of the samples is modelled by Cole-Cole equation. -- Abstract: The complex perovskite oxide barium iron tantalate (BFT), BaFe{sub 1/2}Ta{sub 1/2}O{sub 3}, strontium iron tantalate (SFT), SrFe{sub 1/2}Ta{sub 1/2}O{sub 3} and calcium iron tantalate (CFT), CaFe{sub 1/2}Ta{sub 1/2}O{sub 3} are synthesized by a solid-state reaction technique. Rietveld refinement of the X-ray diffraction data of the samples shows that BFT and SFT crystallize in cubic structure, with lattice parameter a = 4.06 A for BFT and 3.959 A for SFT, whereas CFT crystallizes in orthorhombic structure having lattice parameters a = 5.443 A, b = 5.542 A and c = 7.757 A. Fourier transform infrared spectra show two primary phonon modes of the samples at around 450 cm{sup -1} and 620 cm{sup -1}. The compounds show significant frequency dispersion in its dielectric properties. The complex impedance plane plots of the samples show that the relaxation (conduction) mechanism in these materials is purely a bulk effect arising from the semiconductive grains. The relaxation mechanism of the samples is modelled by Cole-Cole equation. The frequency dependent conductivity spectra are found to follow the power law.

36 MATERIALS SCIENCE↗

Facile preparation of carbon coated magnetic Fe{sub 3}O{sub 4} particles by a combined reduction/CVD process

Graphical abstract: Magnetic carbon coated Fe{sub 3}O{sub 4} particles are prepared by a one step combined reduction of Fe{sub 2}O{sub 3} together with a CVD process of using methane. Analyses show that the Fe{sub 2}O{sub 3} is reduced by methane to produce mainly Fe{sub 3}O{sub 4} particles coated with amorphous carbon. These materials can be separated into two fractions by simple dispersion in water and can be used as adsorbents, catalyst supports and rapid coagulation systems. Research highlights: {yields} Magnetic Fe{sub 3}O{sub 4} particles coated with a very thin layer of amorphous carbon (4 wt%). {yields} Combined reduction of Fe{sub 2}O{sub 3} with a Chemical Vapor Deposition process using methane. {yields} Nanoparticles with an average size of 100-200 nm. {yields} Uses as adsorbent, catalyst support and rapid coagulation systems. -- Abstract: In this work, we report a simple method for the preparation of magnetic carbon coated Fe{sub 3}O{sub 4} particles by a single step combined reduction of Fe{sub 2}O{sub 3} together with a Chemical Vapor Deposition process using methane. The temperature programmed reaction monitored by Moessbauer, X-ray Diffraction and Raman analyses showed that Fe{sub 2}O{sub 3} is directly reduced by methane at temperatures between 600 and 900 {sup o}C to produce mainly Fe{sub 3}O{sub 4} particles coated with up to 4 wt% of amorphous carbon. These magnetic materials can be separated into two fractions by simple dispersion in water, i.e., a settled material composed of large magnetic particles and a suspended material composed of nanoparticles with an average size of 100-200 nm as revealed by Scanning Electron Microscopy and High-resolution Transmission Electron Microscopy. Different uses for these materials, e.g., adsorbents, catalyst supports, rapid coagulation systems, are proposed.

36 MATERIALS SCIENCE↗

Synthesis of boron suboxide from boron and boric acid under mild pressure and temperature conditions

Graphical abstract: Well-crystallized and icosahedral B{sub 6}O crystals were prepared by reacting boron and boric acid at milder reaction conditions (1 GPa and 1300 {sup o}C for 2 h) as compared to previous work.. Research highlights: {yields} Well-crystallized icosahedral B{sub 6}O was synthesized by reacting boric acid and boron. {yields} The synthesis conditions (1 GPa and 1300 {sup o}C for 2 h) are milder in comparison with previous work. {yields} The more practical synthesis method may make B{sub 6}O as a potential substitute for diamond in industry. -- Abstract: Boron suboxide (B{sub 6}O) was synthesized by reacting boron and boric acid (H{sub 3}BO{sub 3}) at pressures between 1 and 10 GPa, and at temperatures between 1300 and 1400 {sup o}C. The B{sub 6}O samples prepared were icosahedral with diameters ranging from 20 to 300 nm. Well-crystallized and icosahedral crystals with an average size of {approx}100 nm can be obtained at milder reaction conditions (1 GPa and 1300 {sup o}C for 2 h) as compared to previous work. The bulk B{sub 6}O sample was stable in air at 600 {sup o}C and then slowly oxidized up to 1000 {sup o}C. The relatively mild synthetic conditions developed in this study provide a more practical synthesis of B{sub 6}O, which may potentially be used as a substitute for diamond in industry as a new superhard material.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of hierarchical titanium silicalite-1 using single template

Graphical abstract: . Hierarchical nano-crystalline TS-1 can be simply synthesized using tetrapropylammonium hydroxide as single template in presence of a 'seed' gel. Research highlights: {yields} Hierarchical nano-crystalline TS-1 can be directly synthesized using tetrapropylammonium hydroxide (TPAOH) as single template in presence of a 'seed' gel. The presence of seed favored the aggregation of TS-1 nanoparticles and thus lead to the interstitial voids that contributed to secondary mesoporosity. The presence of seed could accelerate the crystallization rate and reduce the amount of template, TPAOH. -- Abstract: Hierarchical nano-crystalline TS-1 can be directly synthesized using tetrapropylammonium hydroxide (TPAOH) as single template in the presence of a 'seed' gel. The hierarchical nano-crystalline TS-1 was characterized by scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, UV-Vis diffuse reflectance spectroscopy and nitrogen adsorption-desoprtion. Compared with the conventional TS-1, the hierarchical nano-crystalline TS-1 contained an additional porosity including supermicro/mesopores, which attributed to the interstitial voids existing between the nanocrystals. The secondary porosity in the TS-1 material provided an enhanced external surface area and high mesopore volume in favor of fast diffusion of both reactants and products, which resulted in an enhanced activity in the epoxidation of bulky molecules cyclohexene using aqueous H{sub 2}O{sub 2} solution as oxidant.

36 MATERIALS SCIENCE↗

Enhanced characteristics of Ba{sub 5}SmTi{sub 3}Nb{sub 7}O{sub 30} ferroelectric nanocrystalline ceramic prepared by mechanical activation process: A comparative study

Graphical abstract: In the present work, structural, dielectric, ferroelectric, piezoelectric and pyroelectric properties of tungsten-bronze structured Ba{sub 5}SmTi{sub 3}Nb{sub 7}O{sub 30} ceramics, synthesized by mechanical activation and conventional solid-state reaction processes, have been studied with an objective of comparing the properties of the specimens synthesized by the two processes. The specimen prepared using mechanical activation process exhibits improved structural and electrical properties. Research highlights: {yields} In this report Ba{sub 5}SmTi{sub 3}Nb{sub 7}O{sub 30} compounds have been synthesized. {yields} Synthesis was carried out by mechanical activation and solid-state reaction processes. {yields} The mechanical activation process yields nanocrystalline specimen. {yields} The synthesized specimens were characterized for their electrical properties. {yields} A comparative study reveals that nanocrystalline specimen possesses superior properties. -- Abstract: In the present work, structural, dielectric, ferroelectric, piezoelectric and pyroelectric properties of tungsten-bronze structured Ba{sub 5}SmTi{sub 3}Nb{sub 7}O{sub 30} ceramics, synthesized by mechanical activation and conventional solid-state reaction processes, have been studied with an objective of comparing the properties of the specimens synthesized by the two processes. X-ray diffraction analysis shows the formation of the compound in an orthorhombic structure by both the processes. Scanning electron microscopy reveals the formation of a fine granular microstructure in the specimen synthesized by mechanical activation process compared to the specimen synthesized by conventional solid-state method. The specimen prepared using mechanical activation process exhibits improved electrical properties with higher dielectric constant, lower dielectric loss and higher resistivity. The effective remanent polarization (P{sup -bar{sub r}}) value, d{sub 33} value and pyroelectric coefficients are also observed to be higher in the sample synthesized by the mechanical activation process.

36 MATERIALS SCIENCE↗

Microwave synthesis and electrochemical characterization of mesoporous carbon@Bi{sub 2}O{sub 3} composites

Graphical abstract: An efficient and quick microwave method has been employed to prepare worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites for the first time. The electrochemical measurement shows the worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites exhibits excellent capacitance performance and the maximum specific capacitance is up to 386 F g{sup -1}. Research highlights: {yields} An efficient and quick microwave method has been employed. {yields} A worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites have been successfully prepared. {yields} This composite exhibits excellent capacitance performance. {yields} This composite could be a potential electrode material for the supercapacitors. -- Abstract: An efficient and quick microwave method has been employed to prepare worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites for the first time. As-prepared products have been characterized by X-ray diffraction, N{sub 2} adsorption-desorption, scanning electron microscopy, transmission electron microscopy and inductive coupled plasma atomic emission spectroscopy. The electrochemical measurement shows the worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites exhibits excellent capacitance performance and the maximum specific capacitance reaches 386 F g{sup -1}, three times more than the pure worm-like mesoporous carbon.

36 MATERIALS SCIENCE↗

Dielectric properties of Ba{sub 3-x}K{sub x}CaNb{sub 2}O{sub 9-{delta}} (0.5 < x < 1.25) (KBCN) double perovskites

Graphical abstract: Electrical conductivity, dielectric constant and dielectric loss of Ba{sub 1.75}K{sub 1.25}CaNb{sub 2}O{sub 9-{delta}} in air at 400-700 {sup o}C. Research highlights: {yields} We show the effectiveness of AC impedance spectroscopy to screen dielectric materials and to understand contributing effects on the dielectric properties of polycrystalline metal oxides. {yields} Unlike Ba{sub 3}CaNb{sub 2}O{sub 9}, Ba{sub 3-x}K{sub x}CaNb{sub 2}O{sub 9-{delta}} exhibits negligible grain-boundary and electrode effects to the total electrical properties and is consistent with perovskite-type K-doped BaZrO{sub 3}. {yields} Among the samples investigated, Ba{sub 1.75}K{sub 1.25}CaNb{sub 2}O{sub 9-{delta}} sintered at 1100 {sup o}C showed the highest dielectric constant of 65 at 10{sup 6} Hz and dielectric loss of 0.14 at 400 {sup o}C in air. -- Abstract: We report synthesis, structure and dielectric properties of double perovskite-type Ba{sub 3-x}K{sub x}CaNb{sub 2}O{sub 9-{delta}} (x = 0.5, 0.75, 1, 1.25) (KBCN). Powder X-ray diffraction (XRD) confirmed the formation of double perovskite-type structure and lattice constant decreases with increasing K in KBCN. AC impedance study showed a single semicircle over the investigated temperatures and frequencies in dry H{sub 2}, H{sub 2} + 3% H{sub 2}O, 3% H{sub 2}O + N{sub 2}, while two semicircles were observed at low temperatures in air, which could be attributed to bulk and grain-boundary contributions. Unlike un-doped BCN, KBCN exhibits negligible grain-boundary and electrode effects to the total electrical properties and is consistent with perovskite-type K-doped BaZrO{sub 3}. The bulk dielectric constant and dielectric loss were found to increase with increasing K content in KBCN and also found to change with sintering temperature. Among the samples investigated, Ba{sub 1.75}K{sub 1.25}CaNb{sub 2}O{sub 9-{delta}} sintered at 1100 {sup o}C showed the highest dielectric constant of 65 at 10{sup 6} Hz and dielectric loss of 0.14 at 400 {sup o}C in air. Isothermal dielectric constant and electrical conductivity at 1 MHz were found to be independent at elevated temperatures, while vary at low-frequency and low temperatures. Below 700 {sup o}C, dielectric constant and dielectric loss decreases with increasing frequency, whereas an opposite trend was observed for the electrical conductivity.

36 MATERIALS SCIENCE↗

Formation of novel morphologies of aragonite induced by inorganic template

Graphical abstract: Glass-slices were used as a template to induce formation and assembly of aragonite. Different morphologies, such as hemisphere, twinborn hemisphere and flower-shaped particles, were produced by direction of the glass-slices. Highlights: {yields} Glass-slices were used as a template to induce formation and assembly of aragonite. {yields} Hemisphere, twinborn hemisphere and flower-shaped particles were produced by direction of the glass-slices. {yields} Planes were always appeared in these as-synthesized samples. {yields} Thermodynamic theory was applied to explain the production of the aragonite. -- Abstract: A glass-slice was used as a template to induce formation and assembly of aragonite. Thermodynamic theory was applied to explain the production of the aragonite. Transformation of three-dimensional nucleation to template-based two-dimensional surface nucleation caused the production of aragonite. Hemisphere, twinborn hemisphere and flower-shaped particles were produced by direction of the glass-slices. Planes were always appeared in these as-synthesized samples because the nucleation and the growth of these samples were adsorbed at the surfaces of the glass-slices. The formation mechanism of the as-formed sample was proposed. Compared with organic template, the present study provides a facile method to apply inorganic template to prepare functional materials.

36 MATERIALS SCIENCE↗

Novel solar light driven photocatalyst, zinc indium vanadate for photodegradation of aqueous phenol

Graphical abstract: Novel photocatalyst, zinc indium vanadate (ZnIn{sub 2}V{sub 2}O{sub 9}) demonstrated and showed an excellent photocatalytic activity for phenol degradation under visible light. Research highlights: {yields} Designing and identification of a photocatalyst having prospective potential application to be used in visible light (400-800 nm). {yields} Successful synthesis of novel ZnIn{sub 2}V{sub 2}O{sub 9} by solid state route. {yields} Confirmation of the designed product using characterization techniques. {yields} Application study comprising photodegradation of aqueous phenol at visible light despite of UV radiations. -- Abstract: In the present investigation, we have demonstrated the synthesis of novel photocatalyst, zinc indium vanadate (ZIV) by solid-solid state route using respective oxides of zinc, indium and vanadium. This novel photocatalyst was characterized using XRD, FESEM, UV-DRS and FTIR in order to investigate its structural, morphological and optical properties. XRD clearly shows the formation of phase pure ZIV of triclinic crystal structure with good crystallinity. FESEM micrographs showed the clustered morphology having particle size between 0.5 and 1 {mu}m. Since, optical study showed the band gap around 2.8 eV, i.e. in visible region, we have performed the photocatalytic activity of phenol degradation under visible light irradiation. The photodecomposition of phenol by ZIV is studied for the first time and an excellent photocatalytic activity was obtained using this novel photocatalyst. Considering the band gap of zinc indium vanadate in visible region, it will also be the potential candidate for water splitting.

36 MATERIALS SCIENCE↗

Synthesis of acid-base bifunctional mesoporous materials by oxidation and thermolysis

Graphical abstract: A novel and efficient method has been developed for the synthesis of acid-base bifunctional catalyst. The obtained sample of SO{sub 3}H-MCM-41-NH{sub 2} containing amine and sulfonic acids exhibits excellent catalytic activity in aldol condensation reaction. Research highlights: {yields} Synthesize acid-base bifunctional mesoporous materials SO{sub 3}H-MCM-41-NH{sub 2}. {yields} Oxidation and then thermolysis to generate acidic site and basic site. {yields} Exhibit good catalytic performance in aldol condensation reaction between acetone and various aldehydes. -- Abstract: A novel and efficient method has been developed for the synthesis of acid-base bifunctional catalyst SO{sub 3}H-MCM-41-NH{sub 2}. This method was achieved by co-condensation of tetraethylorthosilicate (TEOS), 3-mercaptopropyltrimethoxysilane (MPTMS) and (3-triethoxysilylpropyl) carbamicacid-1-methylcyclohexylester (3TAME) in the presence of cetyltrimethylammonium bromide (CTAB), followed by oxidation and then thermolysis to generate acidic site and basic site. X-ray diffraction (XRD) and transmission electron micrographs (TEM) show that the resultant materials keep mesoporous structure. Thermogravimetric analysis (TGA), X-ray photoelectron spectra (XPS), back titration, solid-state {sup 13}C CP/MAS NMR and solid-state {sup 29}Si MAS NMR confirm that the organosiloxanes were condensed as a part of the silica framework. The bifunctional sample (SO{sub 3}H-MCM-41-NH{sub 2}) containing amine and sulfonic acids exhibits excellent acid-basic properties, which make it possess high activity in aldol condensation reaction between acetone and various aldehydes.

36 MATERIALS SCIENCE↗

Effect of synthesis conditions on the nanopowder properties of Ce{sub 0.9}Zr{sub 0.1}O{sub 2}

Graphical abstract: . The synthesis of nanocrystalline Ce{sub 0.9}Zr{sub 0.1}O{sub 2} powders via the gel-combustion method, using different fuels, and following either stoichiometric or non-stoichiometric pH-controlled routes is investigated. Research highlights: {yields} All samples exhibited the fluorite-type crystal structure, nanometric average crystallite size and negligible carbon content. {yields} Synthesis conditions strongly affect the average crystallite size, the degree of agglomeration, the specific surface area and the pore volume. {yields} Our results indicate that, by controlling the synthesis conditions it is possible to obtain solids with custom-made morphological properties. -- Abstract: In this work, the synthesis of nanocrystalline Ce{sub 0.9}Zr{sub 0.1}O{sub 2} powders via the gel-combustion method, using different fuels, and following either stoichiometric or non-stoichiometric pH-controlled routes is investigated. The objective is to evaluate the effect of synthesis conditions on the textural and morphological properties, and the crystal structure of the synthesized materials. The solids were characterized by nitrogen physisorption, Scanning Electron Microscopy (SEM), X-ray powder diffraction (XPD), and Carbon-Hydrogen-Nitrogen Elemental Analysis (CHN). All the powders exhibited nanometric crystallite size, fluorite-type structure and negligible carbon content. Synthesis conditions strongly affect the average crystallite size, the degree of agglomeration, the specific surface area and the pore volume. Our results indicate that, by controlling the synthesis conditions it is possible to obtain solids with custom-made morphological properties.

36 MATERIALS SCIENCE↗

Preparation and crystal structure of a new bismuth vanadate, Bi{sub 3.33}(VO{sub 4}){sub 2}O{sub 2}

Graphical abstract: Crystal structure of Bi{sub 3.33}(VO{sub 4}){sub 2}O{sub 2}. Solid lines indicate the unit cell. Highlights: {yields} We can prepare a new bismuth vanadate, Bi{sub 3.33}(VO{sub 4}){sub 2}O{sub 2} by hydrothermal reaction using a hydrated sodium bismuthate. {yields} We clarify that the crystal structure is composed by four bismuth atoms with the coordination number of 6 or 8 and two VO{sub 4} tetrahedra. {yields} This compound exhibited photocatalytic behavior for decomposition of phenol under visible light irradiation. -- Abstract: Single crystals of a new bismuth vanadate, Bi{sub 3.33}(VO{sub 4}){sub 2}O{sub 2} was prepared by hydrothermal reaction using a hydrated sodium bismuthate, NaBiO{sub 3}.nH{sub 2}O as one of the starting compounds. The crystal structure was determined by using single crystal X-ray diffraction data. This compound crystallizes in the triclinic space group P1{sup -bar} (no. 2) with a = 7.114(1), b = 7.844(2), c = 9.372(2) A, {alpha} = 106.090(7), {beta} = 94.468(7) and {gamma} = 112.506(8){sup o}, Z = 2 and the final R factors are R1 = 0.052 and wR2 = 0.14 for 2085 unique reflections. The crystal structure is composed by four bismuth atoms with the coordination number of 6 or 8 and two VO{sub 4} tetrahedra, and one of four bismuth atoms is statistically distributed in the splitting sites with the distance of 0.83 A. This compound exhibited photocatalytic behavior for decomposition of phenol under visible light irradiation and its activity was less than that of monoclinic BiVO{sub 4}.

36 MATERIALS SCIENCE↗

Studies on the growth and physical properties of nonlinear optical crystal: 2-Amino-5-nitropyridinium-toluenesulfonate

Graphical abstract: 2-Amino-5-nitropyridinium-toluenesulfonate is identified as potential candidate for efficient frequency conversion. Research highlights: {yields} Single crystals of 2A5NPT have been grown from saturated solution. {yields} Powder test with Nd:YAG laser radiation shows a high second harmonic generation. {yields} Single shot and multiple shot surface laser damage thresholds are determined. {yields} The thermal parameters of 2A5NPT were measured by an improved photopyroelectric technique. {yields} The high value of damage threshold is related to the specific heat of the crystal which is reasonably high. -- Abstract: Single crystals of 2-amino-5-nitropyridinium-toluenesulfonate (2A5NPT) were grown by the slow cooling method. The unit cell dimensions were determined from single crystal X-ray diffraction studies. The thermal parameters - thermal diffusivity ({alpha}), thermal effusivity (e), thermal conductivity (K) and heat capacity (C{sub p}) of 2A5NPT were measured by an improved photopyroelectric technique at room temperature. Single and multiple shot experiments performed on the grown crystals for the second harmonic of pulsed Nd:YAG laser (532 nm) show that it exhibits a high laser damage threshold which is a favorable property for nonlinear optical applications. Dielectric constant and dielectric loss of the grown crystal were evaluated for the frequency range 1 kHz-1 MHz in the temperature region 40-130 {sup o}C. Hardness values were measured using Vickers hardness measurement.

36 MATERIALS SCIENCE↗

{alpha}-Fe{sub 2}O{sub 3} as an anode material with capacity rise and high rate capability for lithium-ion batteries

Graphical abstract: Nanosized porous {alpha}-Fe{sub 2}O{sub 3} powder was successfully synthesized via the molten salt method. Electrochemical measurement results demonstrated that the electrode properties of the {alpha}-Fe{sub 2}O{sub 3} could offers excellent cycling performance and high rate capability. The capacity of the product shows two different trends during cycling which are rarely reported in the literature, a decrease in capacity in the first 100 cycles and an increase afterwards up to 600 cycles, with the lowest and highest capacity around 970 and 1972 mAh/g, respectively. Research highlights: {yields} Nanosized {alpha}-Fe{sub 2}O{sub 3} as an anode material for lithium-ion battery. {yields} The nanosized {alpha}-Fe{sub 2}O{sub 3} shows excellent electrochemical performance and exhibits the feature of capacity increase upon cycling. {yields} The porous rhombohedral structures of {alpha}-Fe{sub 2}O{sub 3} could provides the short Li{sup +} diffusion length, decreases the traverse time for electrons and Li{sup +} ions, and reduces the volume expansion to some extent. {yields} The cubic structure of {alpha}-Fe{sub 2}O{sub 3} has been modified to a needle-like structure after prolonged cycling. -- Abstract: We report a simple molten salt method to prepare nanosize {alpha}-Fe{sub 2}O{sub 3}, as well as its electrochemical performance as anode material for lithium ion batteries. The structure and morphology were confirmed by Raman spectroscopy, X-ray diffraction, and transmission electron microscopy. The as-prepared {alpha}-Fe{sub 2}O{sub 3} is a rhombohedral phase of hematite with crystal size in the range of 20-40 nm. The electrochemical measurements were performed using the as-prepared powders as the active material for a lithium-ion cell. The nanosized {alpha}-Fe{sub 2}O{sub 3} shows excellent cycling performance and rate capability. It also exhibits the feature of capacity increase upon cycling. The outstanding electrochemical performance of the {alpha}-Fe{sub 2}O{sub 3} can be related to several factors, namely, the short Li{sup +} diffusion length along the porous rhombohedral structures and the nanosized nature of the materials, which decreases the traverse time for electrons and Li{sup +} ions, and reduces the volume expansion to some extent during charge/discharge reactions.

36 MATERIALS SCIENCE↗

Electron beam induced structural evolution in Fe{sub 3}O{sub 4}/SiO{sub 2} particles: A new route to obtain movable core structures

Graphical abstract: SiO{sub 2} hollow spheres with movable Fe{sub 3}O{sub 4} cores were obtained by exposing the Fe{sub 3}O{sub 4}/SiO{sub 2} particles to the electron beam of TEM. It is a new route to obtain movable core nanostructures. Research highlights: {yields} SiO{sub 2} hollow particles with movable Fe{sub 3}O{sub 4} cores were obtained. {yields} Irradiation of electron beam induced the structural evolution. {yields} A new route to obtain hollow particles with movable core. -- Abstract: SiO{sub 2} hollow spheres with movable Fe{sub 3}O{sub 4} core were obtained by exposing the pre-synthesized Fe{sub 3}O{sub 4}/SiO{sub 2} particles (with an adsorption interlayer of ethylene glycol) under the irradiation of electron beam inside transmission electron micrograph (TEM). In the formation process, the evaporation of adsorbed ethylene glycol and the evolution of amorphous SiO{sub 2} layer played important roles, and that should be attributed to the high temperature and trapped charges induced by the irradiation of electron beam. This work provided a new route to obtain particles with movable core structure and extended the applications of electron beam.

36 MATERIALS SCIENCE↗

Turning “on” and “off” nucleation and growth: Microwave assisted synthesis of CdS clusters and nanoparticles

Graphical abstract: Display Omitted Highlights: ► Cadmium acetate and DMSO were employed as ion precursors. ► New approach to controlled CdS nanoparticle synthesis. ► CdS clusters and nanoparticles synthesis achieved using microwave irradiation. ► Microwave irradiation turns on and off nanoparticle growth. ► The formation of clusters, embryos and nanoparticles studied with optical spectroscopy. -- Abstract: We report here on the formation of CdS NP from the microwave assisted reaction of Cd(CH{sub 3}CO{sub 2}){sub 2} with dimethylsulfoxide (DMSO). DMSO serves as the solvent and a controlled source of sulfide ions to form (CdS){sub 1≤n≤5} clusters at the early stages of the process. The clusters grow into CdS nanoparticles, with diameters that range from 1.6 nm up to over 250 nm, with microwave heating. The time dependence of the onset of light absorption and absorbance are consistent with a concurrent nucleation and growth processes. The formation of clusters and nuclei and their subsequent reactions is controlled by turning on and off the energy supply consistent with an energy barrier to the formation of CdS nanostructures.

36 MATERIALS SCIENCE↗