Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Intracavity terahertz generation inside a high-energy ultrafast soliton fiber laser

Intracavity terahertz emission inside a high-energy ultrafast Yb-doped fiber laser is presented. The terahertz radiation is generated by a transient photocurrent induced at the surface of a saturable InGaAs multiquantum well grown by molecular beam epitaxy on top of a semiconductor Bragg reflector. This device simultaneously works as the saturable absorber mirror for initiating and managing the passive mode locking required for the ultrashort pulse operation of the laser system. The maximum terahertz average power achieved is 4.2 {mu}W, which reveals a net conversion efficiency of 3.1x10{sup -5}.

36 MATERIALS SCIENCE↗

Annealing of self-assembled InAs/GaAs quantum dots: A stabilizing effect of beryllium doping

We investigated the effects of postgrowth thermal annealing on optical properties of beryllium-doped InAs quantum dot (QD) heterostructures grown by molecular beam epitaxy. Thermal annealing induced a blueshift of up to 200 meV in light emission from an undoped sample, while a sample having GaAs layer heavily doped with beryllium on top of the QD region exhibited a much smaller blueshift. This phenomenon is interpreted as due to suppression of annealing-induced In/Ga interdiffusion.

36 MATERIALS SCIENCE↗

Room-temperature ferromagneticlike behavior in Mn-implanted and postannealed InAs layers deposited by molecular beam epitaxy

We report on the magnetic and structural properties of Ar- and Mn-implanted InAs epitaxial films grown on GaAs (100) by molecular beam epitaxy and the effect of rapid thermal annealing (RTA) for 30 s at 750 deg. C. Channeling particle induced x-ray emission (PIXE) experiments reveal that after Mn implantation almost all Mn atoms are substitutional in the In site of the InAs lattice, like in a diluted magnetic semiconductor. All of these samples show diamagnetic behavior. However, after RTA treatment the Mn-InAs films exhibit room-temperature magnetism. According to PIXE measurements the Mn atoms are no longer substitutional. When the same set of experiments was performed with Ar as implantation ion, all of the layers present diamagnetism without exception. This indicates that the appearance of room-temperature ferromagneticlike behavior in the Mn-InAs-RTA layer is not related to lattice disorder produced during implantation but to a Mn reaction produced after a short thermal treatment. X-ray diffraction patterns and Rutherford backscattering measurements evidence the segregation of an oxygen-deficient MnO{sub 2} phase (nominally MnO{sub 1.94}) in the Mn-InAs-RTA epitaxial layers which might be the origin of the room-temperature ferromagneticlike response observed.

36 MATERIALS SCIENCE↗

Intervalley separation in the conduction band of InGaAs measured by terahertz excitation spectroscopy

Spectral dependencies of terahertz radiation from the femtosecond laser-illuminated surfaces of Ga{sub x}In{sub 1-x}As (x=1, 0.8, and 0.47) have been investigated experimentally at high optical fluencies and laser wavelengths ranging from 600 to 800 nm. The terahertz pulse amplitude increased with the increasing laser photon energy due to larger excess energies of photoexcited electrons and more efficient spatial separation of electrons and holes at the illuminated surface. This increase was stopped with the onset of electron transitions to subsidiary conduction band valleys. Analysis of these experiments was used for evaluating the energy positions of the X and L conduction band valleys in Ga{sub x}In{sub 1-x}As alloys as a function of their composition.

36 MATERIALS SCIENCE↗

Studies on metal/n-GaAs Schottky barrier diodes: The effects of temperature and carrier concentrations

Metal/Semiconductor Schottky diodes were fabricated to study the effect of temperature and carrier concentrations on diode parameters, such as ideality factor and barrier heights. The diodes were formed on the epitaxial layers of metal organic chemical vapor deposition (MOCVD) grown n-GaAs with metals such as Al, Pd, and Zn-Pd deposited onto n-GaAs by thermal evaporation technique. Trimethyl gallium and AsH{sub 3} were used as Ga and As precursors, respectively, to grow GaAs on semi-insulating GaAs substrates at 600 deg. C and H{sub 2}S was used for n-type doping in a horizontal reactor atmospheric pressure MOCVD system. The Schottky diodes were characterized by forward bias current-voltage measurements in the temperature range 130-300 K and capacitance-voltage measurement at room temperature and diode parameters such as ideality factor and barrier height have been evaluated. It is found that the Schottky barrier height decreases with decrease in temperature while the ideality factor increases. It is also observed that the barrier height increases linearly with the applied forward bias voltage and the rate of change of barrier height with voltage increases for higher carrier concentration of the semiconductor. The carrier concentration of n-GaAs was chosen in the regime 1x10{sup 16}-8.2x10{sup 16} cm{sup -3} so that the depletion region extends inside the semiconductor and the diode can be used as a III-V photovoltaic device.

36 MATERIALS SCIENCE↗

Quantitative compositional analysis and strain study of InAs quantum wires with InGaAlAs barrier layers

Quantitative compositional analysis of InAs quantum wires deposited between In{sub 0.53}Ga{sub 0.37}Al{sub 0.1}As barrier layers grown on InP substrates was performed by electron energy loss spectrometry and energy dispersive x-ray spectrometry. An indium-rich region in the center of the wire, with decreasing indium concentration toward the interface with the barrier layers, was observed from indium concentration maps for individual quantum wires. 'Stripelike' contrast modulation was observed in diffraction contrast transmission electron microscope images of the In{sub 0.53}Ga{sub 0.37}Al{sub 0.1}As barrier layer immediately above the quantum wires. The contrast originated from indium compositional modulations in the upper barrier layer as confirmed by electron energy loss spectrometry and the modulation is attributed to the presence of an inhomogeneous elastic strain field generated by the buried quantum wires. These results suggest that quantitative analysis of the composition and strain distributions at very high spatial resolution provides insights necessary to further model the physical properties and to understand the growth of these nanostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure and texture developments in multiple pulses excimer laser crystallization of GaAs thin films

In this paper, we observed and characterized changes in the microstructure and texture during recrystallization and grain growth in polycrystalline GaAs thin films using multiple pulses crystallization by a KrF excimer laser. Films of various thicknesses were studied to assess film thickness and laser energy density effects. In the low temperature domain corresponding to the partial melting regime, normal grain growth was observed. In the superlateral grain growth regime the increase in grain size was notable with grain sizes much greater than the film thickness. A bimodal grain size distribution emerged implying the onset of secondary grain growth. The change in grain size distribution, texture, and grain boundary texture were analyzed using scanning electron microscopy and electron backscatter diffraction. It was found that grain growth is accompanied by a strengthening in (001) texture, indicating that the grain growth phenomenon is strain energy driven. The experimental results are explained with theory of secondary grain growth in thin films.

36 MATERIALS SCIENCE↗

Highly uniform and strain-free GaAs quantum dots fabricated by filling of self-assembled nanoholes

We demonstrate the self-assembled creation of a novel type of strain-free semiconductor quantum dot (QD) by local droplet etching (LDE) with Al to form nanoholes in AlGaAs or AlAs surfaces and subsequent filling with GaAs. Since the holes are filled with a precisely defined filling level, we achieve ultrauniform LDE QD ensembles with extremely narrow photoluminescence (PL) linewidth of less than 10 meV. The PL peaks agree with a slightly anisotropic parabolic potential. Small QDs reveal indications for transitions between electron and hole states with different quantization numbers. For large QDs, a very small fine-structure splitting is observed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic noise in high electron-mobility transistors under photo-excitation conditions

The hydrodynamic approach based on the carrier concentration and velocity conservation equations is used to investigate the influence of photo-excitation of plasma waves at the beating frequency of two lasers on the intrinsic extra noise in InGaAs HEMTs caused by thermally-induced plasma oscillations. It is found that, by increasing the amplitude of the photo-excitation, a significant supression of the intrinsic excess noise is observed at the beating frequency as well as at all the frequencies where plasma waves can be excited.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Extraction and Analysis of Noise Parameters of On Wafer HEMTs up to 26.5 GHz

This paper presents a procedure for extracting the four noise parameters of on wafer scaled HEMTs based on AlGaAs/GaAs heterostructure. This procedure relies on 50-{omega} noise figure measurements up to 26.5 GHz by determining the equivalent temperatures associated to the intrinsic resistances of the small signal equivalent circuit. The non-quasi-static effect associated to the gate-drain resistance R{sub gd} is accounted for by the noise model. A good agreement between measured and simulated noise figure is obtained and scaling of the noise parameters is reported.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lasing and polariton condensation: Two distinct transitions in GaAs microcavities with stress traps

We have used stress to create a harmonic potential for polaritons in GaAs microcavities and have previously reported that the polaritons undergo spontaneous coherence in the trap. In this paper we present results for both trapped conditions and resonant, nontrapped conditions in the same sample. We find that the results are qualitatively different with two distinct types of transitions. At low density in the trap, the polaritons remain in the strong coupling regime while going through the threshold for onset of coherence; at higher density, there is a different threshold behavior, which occurs with weak coupling and can be identified with lasing; this transition occurs both with and without a trap. The transition at lower density can therefore be identified as a type of nonequilibrium Bose-Einstein condensation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial, electrical, and spin-injection properties of epitaxial Co{sub 2}MnGa grown on GaAs(100)

The interfacial, electrical, and magnetic properties of the Heusler alloy Co{sub 2}MnGa grown epitaxially on GaAs(100) are presented with an emphasis on the use of this metal-semiconductor combination for a device that operates on the principles of spin-injection between the two materials. Through systematic growth optimization the stoichiometry in the bulk Co{sub 2}MnGa can be controlled to better than +-2%, although the interface is disordered and limits the spin-injection efficiency in a practical spintronic device irrespective of the half-metallic nature of the bulk metal. Molecular beam epitaxial growth was monitored in situ by reflection high energy electron diffraction and the bulk composition was measured ex situ with inductively coupled plasma optical emission spectroscopy. The Co{sub 2}MnGa L2{sub 1} cubic structure is strained below a thickness of 20 nm on GaAs(100) but relaxed in films thicker than 20 nm. Electrical measurements on the Co{sub 2}MnGa reveal general characteristics of a disordered electron system with insulating behavior for layer thicknesses <4 nm. Thicker layers show a negative magnetoresistance with extraordinary Hall effect constants up to 30 OMEGA T{sup -1}. Spin polarization transfer across the interface between Co{sub 2}MnGa and GaAs is approximately 6.4% at 5 K in the current of a GaAs p-i-n diode even with compositional disorder at the interface.

36 MATERIALS SCIENCE↗

Strong enhancement of terahertz emission from GaAs in InAs/GaAs quantum dot structures

We report on the intense terahertz emission from InAs/GaAs quantum dot (QD) structures grown by molecular beam epitaxy. Results reveal that the QD sample emission was as high as 70% of that of a p-type InAs wafer, the most intense semiconductor emitter to date. Excitation wavelength studies showed that the emission was due to absorption in strained undoped GaAs, and corresponds to a two order-of-magnitude enhancement. Moreover, it was found that multilayer QDs emit more strongly compared with a single layer QD sample. At present, we ascribe the intense radiation to huge strain fields at the InAs/GaAs interface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Proximity detector circuits: an attractive alternative to tunnel diode oscillators for contactless measurements in pulsed magnetic fields

A new radio frequency oscillator circuit based on a proximity detector integrated circuit is described as an alternative for the traditional tunnel diode oscillator used for pulsed magnetic field measurements at low temperatures. The new circuit has been successfully applied to measure the superconducting upper critical field in Ba{sub 0.55}K{sub 0.45}Fe{sub 2}As{sub 2} single crystfl.ls up to 60 T. The new circuit design avoids many of the problems associated with tunnel diode circuits while keeping the advantages of contact less measurements in pulsed magnets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural, magnetic, and transport properties of laser-annealed GaAs:Mn-H

We have investigated the effect of laser annealing on the structural, magnetic, and transport properties of hydrogenated Ga{sub 0.96}Mn{sub 0.04}As films. Irradiation with nanosecond laser pulses leads to significant recovery of hole-mediated ferromagnetism in these films. By tuning processing parameters such as laser fluence and number of pulses, one can control the electrical and magnetic properties--namely, resistivity, magnetic coercivity, and remnant magnetization--in the laser-activated region. Ion-beam analysis indicates that the structural integrity of the film is maintained upon hydrogenation and laser annealing with evidence for displacement of substitutional Mn ions toward interstitial sites due to hydrogen-complex formation. Laser annealing results in the relaxation of up to 50% of Mn atoms back to substitutional sites while the Curie temperature recovers to approx60% of the T{sub C} prior to hydrogenation. Subsequent thermal annealing results in full relocation of Mn atoms to substitutional sites, yet the T{sub C} remains pinned at approx60% of its original value, suggesting the formation of a defect complex involving substitutional Mn. Our numerical simulations elucidate the strong interplay between laser processing parameters and Mn-H dissociation.

36 MATERIALS SCIENCE↗

Strain and magnetic anisotropy of as-grown and annealed Fe films on c(4x4) reconstructed GaAs (001) surface

Fe films with the different thicknesses were grown on c(4x4) reconstructed GaAs (001) surfaces at low temperature by molecular-beam epitaxy. Well-ordered bcc structural Fe epitaxial films are confirmed by x-ray diffraction patterns and high-resolution cross-sectional transmission electron microscopy images. A large lattice expansion perpendicular to the surface in Fe film is observed. In-plane uniaxial magnetic anisotropy is determined by the difference between magnetizing energy along [110] and [110] directions, and the constant of interfacial uniaxial magnetic anisotropy is calculated to be 1.02x10{sup -4} J m{sup -2}. We also find that magnetic anisotropy is not obviously influenced after in situ annealing, but in-plane strain is completely changed.

36 MATERIALS SCIENCE↗

Nanophotonic technologies for innovative all- optical signal processor using photonic crystals and quantum dots

GaAs-based two-dimensional photonic crystal (2DPC) slab waveguides (WGs) and InAs quantum dots (QDs) were developed for key photonic device structures in the future. An ultrasmall and ultrafast symmetrical Mach-Zehnder (SMZ)-type all-optical switch (PC-SMZ) and an optical flip-flop device (PC-FF) have been developed based on these nanophotonic structures for an ultrafast digital photonic network. To realize these devices, two important techniques were developed. One is a new simulation method, i.e., topology optimization method of 2DPC WGs with wide/flat bandwidth, high transmittance and low reflectivity. Another is a new selective-area-growth method, i.e., metal-mask molecular beam epitaxy method of InAs QDs. This technique contributes to achieving high-density and highly uniform InAs QDs in a desired area such as an optical nonlinearity-induced phase shift arm in the PC-FF. Furthermore, as a unique site-controlled QD technique, a nano-jet probe method is also developed for positioning QDs at the centre of the optical nonlinearity-induced phase shift arm.

36 MATERIALS SCIENCE↗

Midinfrared intersubband absorption in InGaAs/GaAsSb multiple quantum wells

We report on the observation of midinfrared intersubband (ISB) absorption in InGaAs/GaAsSb multiple quantum wells grown lattice-matched to InP substrates by molecular beam epitaxy. ISB absorption in a broad wavelength region (5.8-11.6 {mu}m) is observed in quantum wells with well widths ranging between 4.5 and 12 nm. The conduction band offset at the InGaAs/GaAsSb heterointerface is measured to be 360 meV, giving an excellent agreement between the theoretically calculated ISB transition energies and the Fourier-transform infrared spectroscopy measurements over the whole range of well widths under investigation.

36 MATERIALS SCIENCE↗