Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “trajectory optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Operator-assisted planning and execution of proximity operations subject to operational constraints

Future multi-vehicle operations will involve multiple scenarios that will require a planning tool for the rapid, interactive creation of fuel-efficient trajectories. The planning process must deal with higher-order, non-linear processes involving dynamics that are often counter-intuitive. The optimization of resulting trajectories can be difficult to envision. An interaction proximity operations planning system is being developed to provide the operator with easily interpreted visual feedback of trajectories and constraints. This system is hosted on an IRIS 4D graphics platform and utilizes the Clohessy-Wiltshire equations. An inverse dynamics algorithm is used to remove non-linearities while the trajectory maneuvers are decoupled and separated in a geometric spreadsheet. The operator has direct control of the position and time of trajectory waypoints to achieve the desired end conditions. Graphics provide the operator with visualization of satisfying operational constraints such as structural clearance, plume impingement, approach velocity limits, and arrival or departure corridors. Primer vector theory is combined with graphical presentation to improve operator understanding of suggested automated system solutions and to allow the operator to review, edit, or provide corrective action to the trajectory plan.

Grunwald, Arthur J.↗
NASA NTRS1992

Vertical landing on an asteroid

This work is concerned with the final approach phase and vertical landing on an asteroid with a power-limited, electrically propelled spacecraft. With gravitational effects taken into account, a new solution to the fuel optimal vertical landing on an asteroid was obtained. In this solution, the spacecraft commanded acceleration is explicitly expressed as a function of vehicle velocity and time to go. Based on qualitative methods of analysis, the guidance strategy and the resulting trajectories were studied. It is shown that these fuel-optimal trajectories effectively assure a vertical soft landing on the asteroid. Results of numerical simulations for the vertical landing, starting from an elliptical orbit are presented.

Harel, D.↗
DOE OSTI2017

Prediction-Correction Algorithms for Time-Varying Constrained Optimization

This article develops online algorithms to track solutions of time-varying constrained optimization problems. Particularly, resembling workhorse Kalman filtering-based approaches for dynamical systems, the proposed methods involve prediction-correction steps to provably track the trajectory of the optimal solutions of time-varying convex problems. The merits of existing prediction-correction methods have been shown for unconstrained problems and for setups where computing the inverse of the Hessian of the cost function is computationally affordable. This paper addresses the limitations of existing methods by tackling constrained problems and by designing first-order prediction steps that rely on the Hessian of the cost function (and do not require the computation of its inverse). In addition, the proposed methods are shown to improve the convergence speed of existing prediction-correction methods when applied to unconstrained problems. Numerical simulations corroborate the analytical results and showcase performance and benefits of the proposed algorithms. A realistic application of the proposed method to real-time control of energy resources is presented.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2002

A survey of spacecraft formation flying guidance

This paper is the first comprehensive spacecraft formation flying guidance (FFG) survey. Here by the term guidance we mean both path planning (i. e., reference trajectory generation) and optimal, open loop control design. FFG naturally divides into two areas: Deep Space (DS), in which relative spacecraft dynamics reduce to double integrator form, and Planetary Orbital Environments (POE), in which they do not (e.9. libration point formations). Both areas consider optimal formation reconfigurations. In addition, DS FFG addresses optimal u, v-coverages for multiple spacecraft interferometers and rest-to-rest rotations. The main focus of the POE literature, however, is 'assive apertures.' These are periodic and fuel-eficient relative spacecraft trajectories that accomplish scientific objectives (e.9. synthesizing an aperture).

formation flying guidance optimal control path pla↗
DOE OSTI2021

Optimal toolpath design of additive manufactured composite cylindrical structures

Structural design optimization for additive manufacturing is primarily focused on planar layer-by-layer processes and design of composite cylindrical structures does not often accommodate manufacturing constraints. In this study, we propose to optimize the toolpath trajectory of additively manufactured composite cylinders comprised of multiple thin cylindrical annuli. Additionally, our printing process is based on direct ink writing in which short carbon fibers in a thermoset resin are extruded through a moving nozzle to build up a structure. Since the fibers are primarily aligned in the flow direction of the extrudate, the printing trajectory influences the material properties of the composite structure. To accommodate this, we define the toolpaths as contours of parameterized level-set functions. This parameterization allows us to optimize the material properties and impose manufacturing constraints such as no-overlap, no-sag, minimum radius of curvature, and continuity of the toolpaths. Several examples illustrate the optimization procedure.

42 ENGINEERING↗
NASA NTRS1992

An analytic model for footprint dispersions and its application to mission design

This is the final report on our recent research activities that are complementary to those conducted by our colleagues, Professor Farrokh Mistree and students, in the context of the Taguchi method. We have studied the mathematical model that forms the basis of the Simulation and Optimization of Rocket Trajectories (SORT) program and developed an analytic method for determining mission reliability with a reduced number of flight simulations. This method can be incorporated in a design algorithm to mathematically optimize different performance measures of a mission, thus leading to a robust and easy-to-use methodology for mission planning and design.

Rao, J. R. Jagannatha↗
NASA NTRS1985

Single step optimization of feedback-decoupled spacecraft attitude maneuvers

A next-state optimization technique for monitoring spacecraft maneuvers is examined. The optimization technique permits simultaneous trajectory planning and tracking, incorporates actuator saturation and attitude constraints, and prevents overshoot and undershoot. The global linearization of the dynamics and kinematics for a spacecraft driven by reaction wheels is considered. The equations utilized to derive the spacecraft trajectories are presented. The applications of the next-state optimization procedure to a spacecraft maneuvered by momentum transfer devices and the tracking of the nominal trajectory of a critically damped harmonic oscillator response are described.

Dwyer, T. A. W., III↗
NASA NTRS1981

Automation of On-Board Flightpath Management

The status of concepts and techniques for the design of onboard flight path management systems is reviewed. Such systems are designed to increase flight efficiency and safety by automating the optimization of flight procedures onboard aircraft. After a brief review of the origins and functions of such systems, two complementary methods are described for attacking the key design problem, namely, the synthesis of efficient trajectories. One method optimizes en route, the other optimizes terminal area flight; both methods are rooted in optimal control theory. Simulation and flight test results are reviewed to illustrate the potential of these systems for fuel and cost savings.

Erzberger, H.↗
NASA NTRS1992

Air-breathing hypersonic vehicle guidance and control studies: An integrated trajectory/control analysis methodology, phase 2

An integrated trajectory/control analysis algorithm has been used to generate trajectories and desired control strategies for two different hypersonic air-breathing vehicle models and orbit targets. Both models used cubic spline curve fit tabulated winged-cone accelerator vehicle representations. Near-fuel-optimal, horizontal takeoff trajectories, imposing a dynamic pressure limit of 1000 psf, were developed. The first model analysis case involved a polar orbit and included the dynamic effects of using elevons to maintain longitudinal trim. Analysis results indicated problems with the adequacy of the propulsion model and highlighted dynamic pressure/altitude instabilities when using vehicle angle of attack as a control variable. Also, the magnitude of computed elevon deflections to maintain trim suggested a need for alternative pitch moment management strategies. The second analysis case was reformulated to use vehicle pitch attitude relative to the local vertical as the control variable. A new, more realistic, air-breathing propulsion model was incorporated. Pitch trim calculations were dropped and an equatorial orbit was specified. Changes in flight characteristics due to the new propulsion model have been identified. Flight regimes demanding rapid attitude changes have been noted. Also, some issues that would affect design of closed-loop controllers were ascertained.

Hattis, Philip D.↗
NASA NTRSDate not supplied

Analytical Partial Derivatives of the Q-Law Guidance Algorithm

One method of producing low-thrust trajectories is the closed-loop Q-Law guidance algorithm. This work wraps Q-Law inside a nonlinear programming problem to search for locally optimal gain combinations and enforce nonlinear constraints on the initial state. Gradient-based trajectory optimization has been shown to benefit greatly when analytical partial derivatives are supplied to the optimizer. This paper presents the Q-Law optimization problem setup and derives the Q-Law thrust vector partial derivatives for the State Transition Matrix required by standard nonlinear optimization software.

Jackson L Shannon↗
NASA NTRS1988

Minimax optimal control for atmospheric fly-through trajectories

Necessary conditions for minimax problems with isolated or flat maxima are presented. Some relevant properties concerning the peak heating rate and the peak deceleration during atmospheric entry are discussed. As application of the theory, the problem of minimizing the peak heating rate of a skip trajectory is solved with special emphasis on the discussion of the continuity of the lift control at the point where the maximum occurs along the trajectory.

Lu, P.↗
NASA NTRS1992

Near-optimal energy transitions for energy-state trajectories of hypersonic aircraft

A problem of the instantaneous energy transition that occurs in energy-state approximation is considered. The transitions are modeled as a sequence of two load-factor bounded paths (either climb-dive or dive-climb). The boundary-layer equations associated with the energy-state dynamic model are analyzed to determine the precise location of the transition.

Ardema, M. D.↗
NASA NTRSDate not supplied

Battery Pack Shape Optimization using Transient Heat Conduction Coupled with Cell-Discharge Analysis

Battery electric systems exhibit significant time-dependence, especially when evaluated in the context of an aircraft mission profile with continually changing power demands. Additionally, when evaluating battery-powered aircraft concepts, it is important to accurately compute the temperature of the batteries and properly characterize the thermal response of the system. The temperature of the batteries has a significant impact on cell performance, in addition to safety considerations of maintaining battery temperatures below their operating limit. Because of these considerations, battery models for preliminary design and optimization of aircraft should include the capability to accurately compute the temperature distribution within the battery pack. Furthermore, battery pack designs should be as light-weight as possible to maximize the pack energy density, while also considering battery temperature limits. Here, we demonstrate a simultaneous trajectory and shape optimization of a battery pack concept, using a transient heat transfer finite element model coupled with a time-varying cell-discharge battery model to provide this capability. Including the transient finite element problem in the loop enables accurate temperatures that can be passed back to the cell discharge model, while the cell discharge model can supply the finite element model with time-varying heat boundary conditions to the finite element problem, further benefiting the fidelity of the thermal response of the batteries. We first demonstrate the coupling capability between the battery cell-discharge model and the transient finite-element heat transfer through an optimization which computes the optimal current profile for the battery pack while ensuring the battery temperatures remain below their operational limit. We then build on this optimization by adding shape optimization to the problem, which allows us to consider a composite objective function which also minimizes the mass of the battery pack, while also producing an optimal current discharge profile.

Optimization↗
NASA NTRSDate not supplied

Battery Pack Shape Optimization using Transient Heat Conduction Coupled with Cell-Discharge Analysis

Battery electric systems exhibit significant time-dependence, especially when evaluated in the context of an aircraft mission profile with continually changing power demands. Additionally, when evaluating battery-powered aircraft concepts, it is important to accurately compute the temperature of the batteries and properly characterize the thermal response of the system. The temperature of the batteries has a significant impact on cell performance, in addition to safety considerations of maintaining battery temperatures below their operating limit. Because of these considerations, battery models for preliminary design and optimization of aircraft should include the capability to accurately compute the temperature distribution within the battery pack. Furthermore, battery pack designs should be as light-weight as possible to maximize the pack energy density, while also considering battery temperature limits. Here, we demonstrate a simultaneous trajectory and shape optimization of a battery pack concept, using a transient heat transfer finite element model coupled with a time-varying cell-discharge battery model to provide this capability. The transient finite-element analysis is done using TACS, and the cell-discharge battery model uses OpenMDAO and dymos. Including the transient finite element problem in the loop enables accurate temperatures that can be passed back to the cell discharge model, while the cell discharge model can supply the finite element model with time-varying heat boundary conditions, further benefiting the fidelity of the thermal response of the batteries. We first demonstrate the coupling capability between the battery cell-discharge model and the transient finite-element heat transfer through an optimization which computes the optimal current profile for the battery pack while ensuring the battery temperatures remain below their operational limit. We then build on this optimization by adding shape optimization to the problem, which allows us to consider a composite objective function which also minimizes the mass of the battery pack, while also producing an optimal current discharge profile.

Optimization↗