Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “switch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Evolution of complementary resistive switching characteristics using IrO{sub x}/GdO{sub x}/Al{sub 2}O{sub 3}/TiN structure

The complementary resistive switching (CRS) characteristics using an IrO{sub x}/GdO{sub x}/Al{sub 2}O{sub 3}/TiN single cell are observed whereas the bipolar resistive switching (BRS) characteristics are observed for the IrO{sub x}/GdO{sub x}/TiN structure. Transmission electron microscope and energy dispersive X-ray spectroscopy depth profile show crystalline GdO{sub x} film and the presence of higher amount of oxygen at both IrO{sub x}/GdO{sub x} interface and Al{sub 2}O{sub 3} layer. Inserting thin Al{sub 2}O{sub 3} layer, the BRS is changed to CRS. This CRS has hopping distance of 0.58 nm and Poole-Frenkel current conductions for the “0” and “1” states, respectively. A schematic model using oxygen vacancy filament formation/rupture at the TE/GdO{sub x} interface and Al{sub 2}O{sub 3} layer has been illustrated. This CRS device has good endurance of 1000 cycles with a pulse width of 1 μs, which is very useful for future crossbar architecture.

36 MATERIALS SCIENCE↗

Multifunctional BiFeO{sub 3}/TiO{sub 2} nano-heterostructure: Photo-ferroelectricity, rectifying transport, and nonvolatile resistive switching property

Multifunctional BiFeO{sub 3} nanostructure anchored TiO{sub 2} nanotubes are fabricated by coupling wet chemical and electrochemical routes. BiFeO{sub 3}/TiO{sub 2} nano-heterostructure exhibits white-light-induced ferroelectricity at room temperature. Studies reveal that the photogenerated electrons trapped at the domain/grain boundaries tune the ferroelectric polarization in BiFeO{sub 3} nanostructures. The photon controlled saturation and remnant polarization opens up the possibility to design ferroelectric devices based on BiFeO{sub 3.} The nano-heterostructure also exhibits substantial photovoltaic effect and rectifying characteristics. Photovoltaic property is found to be correlated with the ferroelectric polarization. Furthermore, the nonvolatile resistive switching in BiFeO{sub 3}/TiO{sub 2} nano-heterostructure has been studied, which demonstrates that the observed resistive switching is most likely caused by the electric-field-induced carrier injection/migration and trapping/detrapping process at the hetero-interfaces. Therefore, BiFeO{sub 3}/TiO{sub 2} nano-heterostructure coupled with logic, photovoltaics and memory characteristics holds promises for long-term technological applications in nanoelectronics devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of self-compliance behaviors and internal filament characteristics in intrinsic SiO{sub x}-based resistive switching memory

Self-compliance characteristics and reliability optimization are investigated in intrinsic unipolar silicon oxide (SiO{sub x})-based resistive switching (RS) memory using TiW/SiO{sub x}/TiW device structures. The program window (difference between SET voltage and RESET voltage) is dependent on external series resistance, demonstrating that the SET process is due to a voltage-triggered mechanism. The program window has been optimized for program/erase disturbance immunity and reliability for circuit-level applications. The SET and RESET transitions have also been characterized using a dynamic conductivity method, which distinguishes the self-compliance behavior due to an internal series resistance effect (filament) in SiO{sub x}-based RS memory. By using a conceptual “filament/resistive gap (GAP)” model of the conductive filament and a proton exchange model with appropriate assumptions, the internal filament resistance and GAP resistance can be estimated for high- and low-resistance states (HRS and LRS), and are found to be independent of external series resistance. Our experimental results not only provide insights into potential reliability issues but also help to clarify the switching mechanisms and device operating characteristics of SiO{sub x}-based RS memory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sub-10 nm low current resistive switching behavior in hafnium oxide stack

In this letter, a tip-induced cell relying on the conductive atomic force microscope is proposed. It is verified as a referable replica of an integrated resistive random access memory (RRAM) device. On the basis of this cell, the functionality of sub-10 nm resistive switching is confirmed in hafnium oxide stack. Moreover, the low current switching behavior in the sub-10 nm dimension is found to be more pronounced than that of a 50 × 50 nm{sup 2} device. It shows better ON/OFF ratio and low leakage current. The enhanced memory performance is ascribed to a change in the shape of the conductive filament as the device dimensions are reduced to sub-10 nm. Therefore, device downscaling provides a promising approach for the resistance optimization that benefits the RRAM array design.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resistive switching and voltage induced modulation of tunneling magnetoresistance in nanosized perpendicular organic spin valves

Nanoscale multifunctional perpendicular organic spin valves have been fabricated. The devices based on an La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/Alq3/Co trilayer show resistive switching of up to 4-5 orders of magnitude and magnetoresistance as high as -70% the latter even changing sign when voltage pulses are applied. This combination of phenomena is typically observed in multiferroic tunnel junctions where it is attributed to magnetoelectric coupling between a ferromagnet and a ferroelectric material. Modeling indicates that here the switching originates from a modification of the La{sub 0.7}Sr{sub 0.3}MnO{sub 3} surface. This modification influences the tunneling of charge carriers and thus both the electrical resistance and the tunneling magnetoresistance which occurs at pinholes in the organic layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A high performance transparent resistive switching memory made from ZrO{sub 2}/AlON bilayer structure

In this study, the switching properties of an indium tin oxide (ITO)/zirconium oxide (ZrO{sub 2})/ITO single layer device and those of a device with an aluminum oxynitride (AlON) layer were investigated. The devices with highly transparent characteristics were fabricated. Compared with the ITO/ZrO{sub 2}/ITO single layer device, the ITO/ZrO{sub 2}/AlON/ITO bilayer device exhibited a larger ON/OFF ratio, higher endurance performance, and superior retention properties by using a simple two-step forming process. These substantial improvements in the resistive switching properties were attributed to the minimized influence of oxygen migration through the ITO top electrode (TE), which can be realized by forming an asymmetrical conductive filament with the weakest part at the ZrO{sub 2}/AlON interface. Therefore, in the ITO/ZrO{sub 2}/AlON/ITO bilayer device, the regions where conductive filament formation and rupture occur can be effectively moved from the TE interface to the interior of the device.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resistive memory switching in ultrathin TiO{sub 2} films grown by atomic layer deposition

Electric field controlled forming free and unipolar resistive memory switching was observed in Au/TiO{sub 2}/Pt devices containing ultrathin TiO{sub 2} films of thickness ~ 4 nm grown by atomic layer deposition. These devices showed a large resistance ratio of ~ 10{sup 3} between high and low resistance states along with appreciable time retention for ~ 10{sup 4} seconds and endurance. The spread of reset and set voltages was from ~ 0.4-0.6 V and 1.1-1.5 V respectively with a clear window between them. The resistive switching mechanism was explained based on conductive filamentary model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Localised polymer networks in chiral nematic liquid crystals for high speed photonic switching

Self-assembled periodic structures based upon chiral liquid crystalline materials have significant potential in the field of photonics ranging from fast-switching optoelectronic devices to low-threshold lasers. The flexoelectro-optic effect, which is observed in chiral nematic liquid crystals (LCs) when an electric field is applied perpendicular to the helical axis, has significant potential as it exhibits analogue switching in 10–100 μs. However, the major technological barrier that prohibits the commercial realisation of this electro-optic effect is the requirement of a uniform, in-plane alignment of the helix axis between glass substrates. Here, it is shown that periodic polymer structures engineered in the nematic phase of a chiral nematic LC device using direct laser writing can result in the spontaneous formation of the necessary uniform lying helix (ULH) state. Specifically, two-photon polymerization is used in conjunction with a spatial light modulator so as to correct for aberrations introduced by the bounding glass substrates enabling the polymer structures to be fabricated directly into the device. The ULH state appears to be stable in the absence of an externally applied electric field, and the optimum contrast between the bright and dark states is obtained using polymer structures that have periodicities of the order of the device thickness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PHz current switching in calcium fluoride single crystal

We demonstrate that a current can be induced and switched in a sub-femtosecond time-scale in an insulating calcium fluoride single crystal by an intense optical field. This measurement indicates that a sizable current can be generated and also controlled by an optical field in a dielectric medium, implying the capability of rapid current switching at a rate of optical frequency, PHz (10{sup 15} Hz), which is a couple of orders of magnitude higher than that of contemporary electronic signal processing. This demonstration may serve to facilitate the development of ultrafast devices in PHz frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Contactless analysis of electric dipoles at high-k/SiO{sub 2} interfaces by surface-charge-switched electron spectroscopy

The continuous development of silicon devices has been supported by fundamental understanding of the two interfaces that predict the device properties: high-dielectric oxide (high-k)/SiO{sub 2} and SiO{sub 2}/Si. In the absence of metal electrode fabrication, it is challenging to use spectroscopic approaches to deduce the electric dipoles in these interfaces for the prediction of electrical characteristics such as the leakage current and threshold voltage. Here, we propose a method to analyze the permanent dipole at the high-k/SiO{sub 2} interface by surface-charge-switched electron spectroscopy (SuCSES). An electron flood gun was used to switch the electrical polarity at the insulating surface to extract the interface-dipole contribution from the macroscopic dielectric polarization in the high-k/SiO{sub 2}/Si stack structure. TaO{sub 3}{sup −} nanosheet (TaNS) crystallites, which are a family of high-k tantalate materials deposited on the SiO{sub 2}/Si substrates, were annealed to prepare a nanoscale model interface. The properties of this interface were examined as a function of annealing temperature across the crystalline-to-amorphous transition. Macroscopic dielectric polarization of the TaNS/SiO{sub 2}/Si gate stack was found to exhibit a gradual decay that depended upon the quantum tunneling processes of induced carriers at the SiO{sub 2}/Si interface. Additionally, the dipole at the high-k/thin-SiO{sub 2} interface abruptly changed by ∼0.4 eV before and after annealing at 400 °C, which may be the result of a decrease in conduction-band offsets at the high-k/Si interface. Thus, SuCSES can aid in determining the inherent valence-band offsets in dielectric interfaces by using X-ray photoelectron spectroscopy with high accuracy and precision. Furthermore, SuCSES can determine whether dielectric polarization, including the interfacial dipole, affects the experimental value of the band offsets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetostrictive Fe{sub 73}Ga{sub 27} nanocontacts for low-field conductance switching

The electrical conductance G of magnetostrictive nanocontacts made from Galfenol (Fe{sub 73}Ga{sub 27}) can be reproducibly switched between “on” and “off” states in a low magnetic field of ∼20–30 mT at 10 K. The switching behavior is in agreement with the magnetic field dependence of the magnetostriction inferred from the magnetization behavior, causing a positive magnetostrictive strain along the magnetic field. The repeated magnetic-field cycling leads to a stable contact geometry and to a robust contact configuration with a very low hysteresis of ∼1 mT between opening and closing the contact due to a training effect. Non-integral multiples of the conductance quantum G{sub 0} observed for G > G{sub 0} are attributed to electron backscattering at defect sites in the electrodes near the contact interface. When the contact is closed either mechanically or by magnetic field, the conductance shows an exponential behavior below G{sub 0} due to electron tunneling. This allows to estimate the magnetostriction λ = 4 × 10{sup −5} at 10 K. The results demonstrate that such magnetostrictive devices are suitable for the remote control of the conductance by low magnetic fields in future nanotechnology applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the origin of resistive switching volatility in Ni/TiO{sub 2}/Ni stacks

Resistive switching and resistive random access memories have attracted huge interest for next generation nonvolatile memory applications, also thought to be able to overcome flash memories limitations when arranged in crossbar arrays. A cornerstone of their potential success is that the toggling between two distinct resistance states, usually a High Resistive State (HRS) and a Low Resistive State (LRS), is an intrinsic non-volatile phenomenon with the two states being thermodynamically stable. TiO{sub 2} is one of the most common materials known to support non-volatile RS. In this paper, we report a volatile resistive switching in a titanium dioxide thin film sandwiched by two nickel electrodes. The aim of this work is to understand the underlying physical mechanism that triggers the volatile effect, which is ascribed to the presence of a NiO layer at the bottom interface. The NiO layer alters the equilibrium between electric field driven filament formation and thermal enhanced ion diffusion, resulting in the volatile behaviour. Although the volatility is not ideal for non-volatile memory applications, it shows merit for access devices in crossbar arrays due to its high LRS/HRS ratio, which are also briefly discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

V{sub 3}O{sub 5}: Insulator-metal transition and electric-field-induced resistive-switching

V{sub 3}O{sub 5} is one of the two vanadium oxides that exhibit insulator to metal transitions above room temperature. We report on the DC I–V characteristics of polycrystalline samples and single-crystals of V{sub 3}O{sub 5} over a wide range of currents. For all samples self-heating induced hysteretic nonlinear conductivity followed at higher currents by onset of negative differential resistivity regime, and finally, at highest currents, by switching to the metallic state. Slow switching towards a partially transformed state with a prolonged memory is typical of polycrystalline samples. High currents applied in the metallic state of one of the single crystals affected the oxygen content of the material and even caused appearance and disappearance of a VO{sub 2} inclusion. Simple and reproducible I–V plots were obtained for a single crystal with the currents that barely induced the metallic state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Switching Purcell effect with nonlinear epsilon-near-zero media

An optical topological transition is defined as the change in the photonic iso-frequency surface around epsilon-near-zero (ENZ) frequencies which can considerably change the spontaneous emission of a quantum emitter placed near a metamaterial slab. In this work, we show that due to the strong Kerr nonlinearity at ENZ frequencies, a high-power pulse can induce a sudden transition in the topology of the iso-frequency dispersion curve, leading to a significant change in the transmission of propagating as well as evanescent waves through the metamaterial slab. This evanescent wave switch effect allows for the control of spontaneous emission through modulation of the Purcell effect. We determine a theory of the enhanced nonlinear response of ENZ media to s and p polarized inputs and show that this nonlinear effect is stronger for p polarization and is almost independent of the incident angle. We perform finite-difference time-domain simulations to demonstrate the transient response of the metamaterial slab to an ultrafast pulse and fast switching of the Purcell effect at the sub-picosecond scale. The Purcell factor changes at ENZ by almost a factor of three which is an order of magnitude stronger than that away from ENZ. We additionally demonstrate that due to the inhomogeneous spatial field distribution inside the multilayer metal-dielectric super-lattice, a unique spatial topological transition metamaterial can be achieved by the control pulse induced nonlinearity. This work can lead to ultra-fast control of quantum phenomena in ENZ metamaterials.

42 ENGINEERING↗

Unveiling the structure and electronic characteristics of amorphous GeS for high performance threshold switching

Ovonic threshold switching selectors are widely studied owing to the essential application in high density phase-change memory. Amorphous GeS is proposed as a potential candidate for the excellent performance. However, the knowledge of amorphous GeS is still insufficient up to date. Here, we have studied the structure and electronic characteristics of GeS in the amorphization process, by using ab initio molecular dynamics simulations. The results indicate that the amorphous GeS is mainly made up of Ge–S bonds. The Ge- and S-centered clusters are dominantly in the form of octahedral structures in liquid GeS. Furthermore, during the amorphization process, most of Ge-centered clusters become highly coordinated octahedrons while a small number of Ge-centered clusters change to tetrahedrons, and the S-centered clusters deviate from the octahedral structure gradually. In addition, the large bandgap and the relatively small mid-gap states in amorphous GeS lead to a high switching voltage.

42 ENGINEERING↗

Stimulated-emission wavelength switching in optically pumped InGaAs/AlGaInAs laser heterostructures

We report stimulated near-IR emission in optically pumped InGaAs/AlGaInAs heterostructures and stimulated- emission wavelength switching from 1.9 to 1.5 and then to 1.2 {mu}m with increasing optical pump intensity. The wavelength switching behaviour of the heterostructures depends on their geometry (band-gap profile) and the competition between stimulated emissions at different frequencies in different parts of the system. (control of laser radiation parameters)

36 MATERIALS SCIENCE↗

Switching waves and dissipative structures in a chain of spasers

We have considered the physical mechanism of optical bistability in a spaser in the field of an external optical wave. We have studied the effect of this phenomenon on the dynamics of a 1D chain of coupled spasers. It is shown that such a chain demonstrates the behaviour typical of open nonlinear systems. In particular, for high Joule losses in a spaser, a nonlinear switching autowave propagates in the chain, thereby evolving the spasers' state from a low population inversion state into a high population inversion state or vice versa. The control parameter that determines the type of switching is the amplitude of the external optical wave. For low Joule losses there emerge quasi-periodic dissipative structures whose formation dynamics is of 'self-assembly' nature. (optical fibres, lasers and amplifiers. properties and applications)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Switching of electrochemical selectivity due to plasmonic field-induced dissociation

Electrochemical reactivity is known to be dictated by the structure and composition of the electrocatalyst–electrolyte interface. Here, we show that optically generated electric fields at this interface can influence electrochemical reactivity insofar as to completely switch reaction selectivity. We study an electrocatalyst composed of gold–copper alloy nanoparticles known to be active toward the reduction of CO 2 to CO. However, under the action of highly localized electric fields generated by plasmonic excitation of the gold–copper alloy nanoparticles, water splitting becomes favored at the expense of CO 2 reduction. Real-time time-dependent density functional tight binding calculations indicate that optically generated electric fields promote transient-hole-transfer-driven dissociation of the O─H bond of water preferentially over transient-electron-driven dissociation of the C─O bond of CO 2 . These results highlight the potential of optically generated electric fields for modulating pathways, switching reactivity on/off, and even directing outcomes.

Alcorn, Francis M.↗