Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Properties of Nb3Sn films fabricated by magnetron sputtering from a single target

Superconducting Nb3Sn films were fabricated on sapphire and fine grain Nb substrates by magnetron sputtering from a single stoichiometric Nb3Sn target. The structural, morphological and superconducting properties of the films annealed for 24 h at temperatures of 800-1000 {\deg}C were investigated. The effect of the annealing time at 1000 {\deg}C was examined for 1, 12, and 24 h. The film properties were characterized by X-ray diffraction, scanning electron microscopy, atomic force microscopy, energy dispersive X-ray spectroscopy, and Raman spectroscopy. The DC superconducting properties of the films were characterized by a four-point probe measurement down to cryogenic temperatures. The RF surface resistance of films was measured over a temperature range of 6-23 K using a 7.4 GHz sapphire-loaded Nb cavity. As-deposited Nb3Sn films on sapphire had a superconducting critical temperature of 17.21 K, which improved to 17.83 K when the film was annealed at 800 {\deg}C for 24 h. For the films annealed at 1000 {\deg}C, the surface Sn content was reduced to ~11.3 % for an annealing time of 12 h and to ~4.1 % for an annealing time of 24 h. The Raman spectra of the films confirmed the microstructural evolution after annealing. The RF superconducting critical temperature of the as-deposited Nb3Sn films on Nb was 16.02 K, which increased to 17.44 K when the film was annealed at 800 {\deg}C for 24 h.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Spontaneous Formation of Single-Crystalline Spherulites in a Chiral 2D Hybrid Perovskite

In two-dimensional (2D) chiral metal-halide perovskites (MHPs), chiral organic spacers induce structural chirality and chiroptical properties in the metal-halide sublattice. This structural chirality enables reversible crystalline-glass phase transitions in (S-NEA) 2 PbBr 4 , a prototypical chiral 2D MHP where NEA + represents 1-(1-naphthyl)ethylammonium. Here, in this study, we investigate two distinct spherulite states of (S-NEA) 2 PbBr 4 , exhibiting either radial-like or stripe-like banded patterns depending on the annealing conditions of the amorphous film. Despite similarities in optical absorption and photoluminescence, the stripe-like, banded spherulite exhibits higher crystallinity and improved optical transparency compared to those of radial-like spherulite. X-ray nanoprobe measurements reveal tilting-angle modulations in the octahedral plane of stripe-like spherulites, correlating with the film’s surface geometry. Transfer matrix calculations indicate that the optical contrast in stripe-like patterns, seen in bright-field optical microscopy, arises from optical interference effects, differing from the contrast mechanism observed in polymer spherulites. Ultrafast carrier dynamics experiments suggest that the stripe-like spherulites resemble single crystals more closely than radial-like spherulites, while electrical conductivity measurements show enhanced charge carrier transport in stripe-like spherulites. These findings offer insights into MHP spherulite states with a single composition but different morphologies, previously observed only in polymers, highlighting their potential for optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Chemical and morphological evolution of hybrid conversion coatings in low-Earth orbit space environment

Understanding how protective coatings respond to the harsh low-Earth orbit (LEO) environment is essential for ensuring the safety, longevity, and cost-effectiveness of spacecraft. In particular, identifying environmentally friendly, non-chromate alternatives that can maintain performance under such conditions has both technological and regulatory significance. This study investigates the environmental stability of zirconium-based hybrid conversion coatings with Cu additives (Cu10 and Cu20) applied to cold-rolled steel, tested in the Materials International Space Station Experiment (MISSE) outside the International Space Station (ISS). Chemical and morphological analyses were carried out using a combination of electron microscopy and X-ray spectroscopy techniques, including scanning electron microscopy (SEM), scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy (STEM-EDS), X-ray photoelectron spectroscopy (XPS), and X-ray absorption near-edge structure (XANES) spectroscopy. After exposure outside the ISS, all coatings remained structurally intact, with all exhibiting a uniform Zr-rich matrix and embedded Cu-rich clusters, while a thin Si-rich surface layer developed from interaction with space environments. Depth-resolved XPS showed a layered structure with CuO on the surface, Cu 2 O, and partial Zr(IV) reduction near Cu-rich sites, evidence of Atomic Oxygen (AO)-driven surface oxidation. These results demonstrate that Cu–Zr coatings maintain their chemical integrity and microstructure in harsh space environments, offering a non-chromate alternative for long-term aerospace protection. These insights provide valuable guidance for developing next-generation protective coatings that combine environmental sustainability with the reliability required for future aerospace and orbital applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Resonant Soft X-ray Scattering Reveals Hierarchical Structure in a Multicomponent Vapor-Deposited Glass

Multiphase vapor-deposited glasses are an important class of materials for organic electronics, particularly organic photovoltaics and thermoelectrics. These blends are frequently regarded as molecular alloys and there have been few studies of their structure at nanometer scales. Here, in this work, we show that a codeposited system of TPD (N,N'-bis(3-methylphenyl)-N,N'-diphenylbenzidine) and DO37 (disperse orange 37), two small molecule glass-formers, separates into amorphous, compositionally distinct phases with a domain size and spacing ca. 10s of nanometers that depends on substrate temperature during deposition. Domains rich in one of the two components become larger and more pure at higher deposition temperatures. We use resonant soft X-ray scattering (RSoXS) complemented with atomic force microscopy (AFM) and photoinduced force microscopy to measure the phase separation, topography, and purity of the deposited films. A forward-simulation approach to RSoXS analysis, the National Institute of Standards and Technology RSoXS Simulation Suite (NIST RSoXS simulation suite), is used with models developed from AFM images to evaluate the energy dependence of scattering across multiple length scales and interpret the RSoXS with respect to structure within the films. We find that the RSoXS is sensitive to a length scale of phase separation buried within the film that is consistent with the surface composition profile, and correlates to the topography to an extent that depends on substrate temperature. We demonstrate that vacuum scattering, which is often ignored in RSoXS analysis, contributes significantly to the features and energy dependence of the RSoXS pattern, and then illustrate how to properly account for vacuum scattering to analyze films with significant roughness. We then use this analysis framework to understand structure development mechanisms that occur during vapor deposition of a TPD-DO37 codeposited glass with results that outline paths to tune morphology in multicomponent materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Bottlebrush Block Copolymer Thin Films

The self-assembly of block copolymers (BCPs) in thin films is governed by interfacial interactions (enthalpy) between the blocks and interfaces (at both the substrate and the surface). Advantage can also be taken of entropy to control the polymer orientation. Here, we synthesized a series of bottlebrush block copolymers (BBCPs), with deuterated polystyrene (DPS) as the core block and poly­(solketal acrylate) (PSA) as the corona block, where the backbone length (N BB) and grafting densities (GDs) were varied. The hydrophobic PSA block was converted to a hydrophilic poly­(glyceryl acrylate) (PGA) block by solid-state hydrolysis, bringing the BBCP from a disordered state into an ordered state with a lamellar microdomain morphology. The orientation of the morphology as a function of distance from the interfaces was systematically investigated by atomic force microscopy (AFM), interference microscopy, grazing-incidence small-angle X-ray scattering (GISAXS), and grazing-incidence small angle neutron scattering (GISANS). For N BB = 1 (diblock BCP), a mixed lamellar orientation was found. For N BB = 5 (star-like BBCP), a vertical orientation of the lamellar microdomains was found dominantly at the interfaces that propagated into the bulk of the film due to the entropic penalty associated with constraints on the junction points. Increasing the N BB to 50 (rod-like BBCP) and 100 (worm-like BBCP) yielded a random orientation, as the side chains became overcrowded when aligned in the same direction. By reducing the grafting density (GD) of a N BB = 50 BBCP from 100% to 75% and 50% by the incorporation of spacers into the backbone, the steric hindrance of side chains is reduced markedly, facilitating a vertical orientation of the lamellar microdomains. However, the vertical orientation becomes more random within the bulk of the thin film for different BBCP architectures. By modifying the substrate with a layer of PS, the preferential interactions between the core block of the BBCP and the interfaces induce a reconfiguration of the BBCP, drawing the core block out to contact substrate directly driven by enthalpy. Under these conditions, N BB = 5 showed a predominantly parallel orientation of the lamellar microdomains with the corona block minimizing contact with the substrate. Higher N BB values of 50 and 100 showed a more random orientation of the lamellar microdomains at different depths on the PS-modified substrate. Overall, thin-film morphology was regulated by tuning the configuration of the BBCP, varying the entropic contribution to the microdomain orientation.

Chen, Zhan↗
DOE OSTI2022

Understanding the Impacts of Support–Polymer Interactions on the Dynamics of Poly(ethyleneimine) Confined in Mesoporous SBA-15

Supported amines are a promising class of CO 2 sorbents offering large uptake capacities and fast uptake rates. Additionally, among supported amines, poly(ethyleneimine) (PEI) physically impregnated in the mesopores of SBA-15 silica is widely used. Within these composite materials, the chain dynamics and morphologies of PEI strongly influence the CO 2 capture performance, yet little is known about chain and macromolecule mobility in confined pores. Here, we probe the impact of the support–PEI interactions on the dynamics and structures of PEI at the support interface and the corresponding impact on CO 2 uptake performance, which yields critical structure–property relationships. The pore walls of the support are grafted with organosilanes with different chemical end groups to differentiate interaction modes (spanning from strong attraction to repulsion) between the pore surface and PEI. Combinations of techniques, such as quasi-elastic neutron scattering (QENS), 1 H T 1 –T 2 relaxation correlation solid-state NMR, and molecular dynamics (MD) simulations, are used to comprehensively assess the physical properties of confined PEI. We hypothesized that PEI would have faster dynamics when subjected to less attractive or repulsive interactions. However, we discover that complex interfacial interactions resulted in complex structure–property relationships. Indeed, both the chain conformation of the surface-grafted chains and of the PEI around the surface influenced the chain mobility and CO 2 uptake performance. By coupling knowledge of the dynamics and distributions of PEI with CO 2 sorption performance and other characteristics, we determine that the macroscopic structures of the hybrid materials dictate the first rapid CO 2 uptake, and the rate of CO 2 sorption during the subsequent gradual uptake stage is determined by PEI chain motions that promote diffusive jumps of CO 2 through PEI-packed domains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Excitonic Spin-Coherence Lifetimes in CdSe Nanoplatelets Increase Significantly with Core/Shell Morphology

Here, we report spin-polarized transient absorption for colloidal CdSe nanoplatelets as functions of thickness (2–6 monolayer thickness) and core/shell motif. Using electro-optical modulation of co- and cross-polarization pump–probe combinations, we sensitively observe spin-polarized transitions. Core-only nanoplatelets exhibit few-picosecond spin lifetimes that weakly increase with layer thickness. The spectral content of differenced spin-polarized signals indicate biexciton binding energies that decrease with increasing thickness and smaller values than previously reported. Shell growth of CdS with controlled thicknesses, which partially delocalize the electron from the hole, significantly increases the spin lifetime to ~49 ps at room temperature. Implementation of ZnS shells, which do not alter delocalization but do alter surface termination, increased spin lifetimes up to ~100 ps, bolstering the interpretation that surface termination heavily influences spin coherence, likely due to passivation of dangling bonds. Spin precession in magnetic fields both confirms long coherence lifetime at room temperature and yields the excitonic g factor.

2D semiconductor↗
DOE OSTI2021

Li2O-Based Cathode Additives Enabling Prelithiation of Si Anodes

Low first-cycle Coulombic efficiency is especially poor for silicon (Si)-based anodes due to the high surface area of the Si-active material and extensive electrolyte decomposition during the initial cycles forming the solid electrolyte interphase (SEI). Therefore, developing successful prelithiation methods will greatly benefit the development of lithium-ion batteries (LiBs) utilizing Si anodes. In pursuit of this goal, in this study, lithium oxide (Li2O) was added to a LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode using a scalable ball-milling approach to compensate for the initial Li loss at the anode. Different milling conditions were tested to evaluate the impact of particle morphology on the additive performance. In addition, Co3O4, a well-known oxygen evolution reaction catalyst, was introduced to facilitate the activation of Li2O. The Li2O + Co3O4 additives successfully delivered an additional capacity of 1116 mAh/gLi2O when charged up to 4.3 V in half cells and 1035 mAh/gLi2O when charged up to 4.1 V in full cells using Si anodes.

25 ENERGY STORAGE↗
DOE OSTI2022

Carrier properties of Bi(111) grown on mica and Si(111)

A comparison is presented between properties of Bi(111) films grown by Stranski-Krastanov epitaxy on Si(111) 7 × 7 and by van der Waals epitaxy on mica substrates. Thin film morphologies and electronic transport properties of Bi(111) films of variable thickness are investigated for each growth method. Atomic force micrographs for Bi(111) films on mica reveal clearly defined triangular regions consisting of layered steps with height 0.4 nm, corresponding to the Bi(111) bilayer height. Variable-temperature electronic transport measurements show the existence of a quantum confinement-induced energy gap in the film interiors, resulting in a semimetal-to-semiconductor transition. Magnetotransport analysis in a three-carrier model including metallic electrons in surface states and electrons and holes in the films' interiors provides a detailed study of densities, mobilities, and mean-free paths of the three carrier types. Further, improved electronic transport properties are found in Bi(111) films of higher thickness on mica compared to on Si(111), a likely result of the largely strain-free van der Waals epitaxial growth.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Sulfur Poisoning and Performance Recovery of SOFC Air Electrodes

The sulfur poisoning and performance recovery of the state-of-the-art SOFC cathodes (La 0 . 80 Sr 0 . 20 ) 0 . 95 MnO 3 ± δ (LSM) and (La 0 . 60 Sr 0 . 40 ) 0 . 95 Co 0 . 20 Fe 0 . 80 O 3 – δ (LSCF), have been studied. Electrochemical impedance spectroscopy measurements of LSCF|GDC and LSM|YSZ half-cells are carried out in alternating atmospheres of air and SO 2 –air at 700°C for hundreds of hours. In the presence of SO 2 , the electrochemical performance of both the cells decays with ohmic and non-ohmic losses, owing to the absorption and chemical interaction of SO 2 with the electrodes. In LSCF, the SrO segregated on the surface tends to absorb and react with SO 2 , forming SrSO 4 followed by the exsolution of Co-Fe. As for LSM, SO 2 is absorbed onto the Sr-rich areas of LSM, including the active reaction sites near the TPBs, leading to Sr exsolution and SrSO 4 formation, leaving a Sr-deficient LSM. During the subsequent exposure to air, the performance of the sulfur-contaminated LSM is almost restored. The LSM particles, exposed to alternating atmospheres of air and SO 2 -air during the electrochemical tests, show a relatively clean surface with sparsely distributed SrSO 4 particles, indicating a high stability against sulfur poisoning. It is suggested that the loosely adsorbed SO 2 at the TPBs is readily swept away by the SO 2 -free air flow, recovering its ORR activity, whereas the Sr-deficient LSM due to Sr-exsolution stays modified, contributing to the incomplete performance restoration. Unlike the case of LSM, the performance of the sulfur-poisoned LSCF partially recovers during the subsequent exposure to air. Correspondingly, the LSCF particles have a modified morphology covered with numerous nanoparticles, mostly SrSO 4 , showing the irreversible aspect of the sulfur poisoning. The morphology modification is not concentrated near the electrode/electrolyte interface but over the entire cathode, indicating that the degree of recovery from sulfur poisoning is closely related to the presence of SrO and chemical activity of Sr in the electrodes at the solid-gas interface. These results also show the potential application of LSM for a sulfur sensor available in high-temperature harsh conditions.

25 ENERGY STORAGE↗
DOE OSTI2021

Nanoscale properties of lead halide perovskites by scanning tunneling microscopy

Since the introduction of lead halide perovskites, tremendous progress has been made regarding their stability, reproducibility and durability. However, one of the issues that remains is related to the interfacial atomic structure arrangement and structure-property relationship under optical and electrical stimuli. In this critical review, we highlight the recent progress using scanning tunneling microscopy (STM) to understand the nanoscale properties and dynamic processes occurring in these halide perovskite materials. STM is known to be a very challenging technique, which is reflected by the low number of relevant publications in the last years. These initial reports mirror the unique potential of STM to give Ångstrom-scale insight into the (opto)-electronic properties, morphology and underlying electronic structure and provide a path toward harnessing the full potential of these materials. However, care must be taken to understand the effects of the perturbations caused by STM and tailor the measurement conditions accordingly.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Water mediated growth of oriented single crystalline SrCO3 nanorod arrays on strontium compounds

Abstract Morphology-controlled strontianite nanostructures have attracted interest in various fields, such as electrocatalyst and photocatalysts. Basic additives in aqueous strontium solutions is commonly used in controlling strontianite nanostructures. Here, we show that trace water also serves an important role in forming and structuring vertically oriented strontianite nanorod arrays on strontium compounds. Using in situ Raman spectroscopy, we monitored the structural evolution from hydrated strontium to strontianite nanorods, demonstrating the epitaxial growth by vapor–liquid–solid mechanism. Water molecules cause not only the exsolution of Sr liquid droplets on the surface but also the uptake of airborne CO 2 followed by its ionization to CO 3 2− . The existence of intermediate SrHO + –OCO 2 2− phase indicates the interaction of CO 3 2− with SrOH + in Sr(OH) x (H 2 O) y cluster to orient strontianite crystals. X-ray diffraction simulation and transmission electron microscopy identify the preferred-orientation plane of the 1D nanostructures as the (002) plane, i.e., the growth along the c-axis. The anisotropic growth habit is found to be affected by the kinetics of carbonation. This study paves the way for designing and developing 1D architecture of alkaline earth metal carbonates by a simple method without external additives at room temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Experimental Testing of Particle Erosion and Attrition in CSP Systems

In CSP systems using solid particles for heat transfer, erosion from the falling particles can damage the system components upon impact, and from sliding against the component walls. Furthermore, the resulting attrition of particles can change the thermal performance due to alterations in particle morphology. The research on these issues has been limited to industrial applications, and don’t necessarily coincide with the operating conditions in CSP systems. In this work, we investigated the durability of the particles selected as the heat transfer media, as well as special substrate materials that are of interest as lining materials to the particle storage tanks and hoppers. Three different erosion phenomena were studied: impact, abrasion, and attrition erosion. The low-temperature experiments revealed negligible losses from attrition and abrasion erosion. Although the substrates indicated visible surface damage from impact erosion, the actual material mass loss was small even after a throughput of 500kg of particles 63 days of 1MW CSP plant operation assuming 14 hours per day of operation. Erosion is typically classified as impact, abrasion, or attrition erosion. For example, the CSP systems utilizing solid particles as heat transfer media will likely experience impact erosion on the receiver hopper and heat exchanger walls as the solid particles fall from the reservoir. Additionally, there will be sliding erosion along the receiver walls as particles move through the hopper, and lastly, there will also be attrition erosion as the particles rub against each other. The extent of erosion depends on many factors including but not limited to particle shape and size, material hardness/brittleness and ductility, and particle impact speed and angle. Mechanistic erosion equations that are available in the literature are mostly derived from data pertaining to specific experiments and therefore can’t be applied to all applications without suitable adjustments. Survey of the literature relating to particle-based receivers revealed that the most prevalent approach has been to choose low velocities to limit erosion, but to our knowledge, little effort has been put in to fully characterize erosion at the expected operating conditions. A relatively recent work investigated the erosion of wire mesh proposed for use in a particle receiver, where the results actually showed an increase in mass as oxidation occurred on the mesh surface but the work did not investigate the particle attrition rate, and the erosion rate of a solid substrate. The end goal of this work is to develop a comprehensive particle and substrate durability model that will allow a comprehensive understanding of particle-based CSP operating conditions on component durability.

14 SOLAR ENERGY↗
DOE OSTI2023

1-D coupled surface flow and transport equations revisited via the physics-informed neural network approach

The de Saint-Venant equation (SVE) and advection–diffusion equation (ADE) are commonly employed to solve solute transport problems in surface water. In this work, we propose a mesh-free method based on the physics-informed neural network (PINN) to solve the one dimensional (1-D) SVE, ADE, and the coupled SVE and ADE (SVE-ADE) under various initial and boundary conditions. The PINN model extends the architecture of deep neural networks (DNNs) with implementation of loss function, which are additionally subject to constraints imposed by the physical laws of SVE and ADE, along with their initial and boundary conditions. In such a manner, PINNs can be quickly steered to the true solution while obeying the physical laws. The results of PINN model are compared with the analytical and/or numerical solutions under various conditions to investigate its accuracy and efficiency in solving the SVE, ADE, and SVE-ADE. Our results indicate PINN can accurately simulate the shock wave morphology and avoid numerical dissipation in unsteady flow condition. The PINN method outweighed traditional numerical methods in several aspects, including its ability to function with small amounts of data, no grid discretization, and random selection of sampling points, etc. Additionally, the PINN method is also suitable for solving inverse problems with sparse and noisy data. With 1% noise and 2000 initial and boundary condition points (N u ), the errors of the estimated flow rate (v) and diffusion coefficient (D) are 0.003% and 0.105%, respectively, which indicate the accuracy and robustness of the proposed method. Finally, our results indicate the capability and robustness of the proposed PINN methodology for solving multi-physics problems, irrespective of the presence of sparse and noisy data in the training dataset.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Impact of Dilute DIO Additive on Local Microstructure of Fluorinated, pNDI‐Based Polymer Solar Cells

The performance of all‐polymer solar cells is often enhanced by incorporating solvent additives during solution processing. Here, in particular, blends based on the model all‐polymer system PBDBT:N2200 have been shown to have increased short‐circuit current and fill factor when processed with dilute diiodooctane (DIO). However, the morphological mechanism that drives the increase in performance is often not well understood due to limitations in common characterization techniques. In this study, it is shown that a combination of X‐ray techniques with cryogenic high‐resolution transmission electron microscopy (HRTEM) analysis can provide a quantitative and spatially resolved picture of polymer chain orientation and alignment in all‐polymer blends. It is found that DIO induces vertical phase separation in PBDBT‐2F:F‐N2200 and increases donor crystallite thickness in the pi‐stacking direction leading to an acceptor‐rich film surface. However, it is also shown that DIO does not disrupt the formation of face‐on donor–acceptor interfaces. These findings suggest that dilute DIO primarily affects crystalline domain formation in single component regions as opposed to mixed regions; thus, dilute DIO can impact vertical charge transport pathways without sacrificing donor–acceptor interfacial connectivity.

Cheng, Christina↗
DOE OSTI2020

An outbreak of Septoria canker caused by Sphaerulina musiva on Populus trichocarpa in eastern Oregon

Branch and stem cankers were observed in a Populus trichocarpa L. plantation in late summer of 2018 near Boardman, Oregon USA. Stem cankers were flat faced with swollen margins and the bark in the center of the cankers was black and depressed (Figure 1). 254 out of 1054 trees (25%) observed had cankers. Symptomatic stems and branches from several trees were brought to Oregon State University for identification. Cankers were surface-disinfested in a 5% NaOCl for 2 min and rinsed twice in deionized H 2 O for 2 min. Bark was removed from cankers and pieces of wood at the margin between healthy and necrotic tissue were plated on KV8 medium amended with streptomycin sulfate at 100 mg liter–1 and chloramphenicol (Amresco) at 240 mg liter–1 (Dunnell and LeBoldus 2017). Eight sporulating colonies typical of Sphaerulina musiva (Peck) Quaedvlieg, Verkley, and Crous (Syn. = Septoria musiva Peck) developed within 7 days of plating. S. musiva was identified by morphological characteristics (conidium size = 28–54 × 3.5–4 µm) and confirmed by comparing the sequence of the ITS region (accession numbers: MN275180-MN275187) to JX901814 with 99% identity. We tested 13 additional cankers collected from the plantation using S. musiva specific primers (Abraham et al. 2018). Eight of the 13 samples were positive for S. musiva DNA. Dormant cuttings from three genotypes of P. trichocarpa (BESC-184; BESC-259; BESC-388) were collected in a field planting near Oregon State University (OSU). These were planted in cone-tainers in the greenhouse at OSU and grown to approximately 30 cm in height. Four replicates of each of the three genotypes were inoculated in the greenhouse with one Oregon isolate using a suspension of 1x10 6 conidia ml-1. The entire tree was sprayed until runoff using a spray bottle (LeBoldus et al. 2010). The experimental design was a completely randomized design with four replicates of each genotype. Sterile deionized H 2 O was sprayed on one control tree of each genotype. The mean number of resulting cankers were BESC-184 = 11, BESC-259 = 1, and BESC-388 = 13.75. The controls did not develop any cankers. The pathogen was successfully reisolated from one canker from each genotype. Sphaerulina musiva can cause severely damaging leaf spot and stem canker diseases in the eastern and central USA and Canada (Bier 1939; Herath et al. 2016). Susceptible Populus species and hybrids develop cankers which can girdle and weaken stems, leading to breakage or tree death (Bier 1939). A previous survey of the region did not detect S. musiva (Newcombe et al. 1995). This outbreak of Septoria canker underscores the potential threat of this pathogen to P. trichocarpa in the Pacific Northwest where it is a keystone species in riparian ecosystems.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Arabidopsis thaliana EARLY RESPONSIVE TO DEHYDRATION 7 Localizes to Lipid Droplets via Its Senescence Domain

Lipid droplets (LDs) are neutral-lipid-containing organelles found in all kingdoms of life and are coated with proteins that carry out a vast array of functions. Compared to mammals and yeast, relatively few LD proteins have been identified in plants, particularly those associated with LDs in vegetative (non-seed) cell types. Thus, to better understand the cellular roles of LDs in plants, a more comprehensive inventory and characterization of LD proteins is required. Here, we performed a proteomics analysis of LDs isolated from drought-stressed Arabidopsis leaves and identified EARLY RESPONSIVE TO DEHYDRATION 7 (ERD7) as a putative LD protein. mCherry-tagged ERD7 localized to both LDs and the cytosol when ectopically expressed in plant cells, and the protein’s C-terminal senescence domain (SD) was both necessary and sufficient for LD targeting. Phylogenetic analysis revealed that ERD7 belongs to a six-member family in Arabidopsis that, along with homologs in other plant species, is separated into two distinct subfamilies. Notably, the SDs of proteins from each subfamily conferred targeting to either LDs or mitochondria. Further, the SD from the ERD7 homolog in humans, spartin, localized to LDs in plant cells, similar to its localization in mammals; although, in mammalian cells, spartin also conditionally localizes to other subcellular compartments, including mitochondria. Disruption of ERD7 gene expression in Arabidopsis revealed no obvious changes in LD numbers or morphology under normal growth conditions, although this does not preclude a role for ERD7 in stress-induced LD dynamics. Consistent with this possibility, a yeast two-hybrid screen using ERD7 as bait identified numerous proteins involved in stress responses, including some that have been identified in other LD proteomes. Collectively, these observations provide new insight to ERD7 and the SD-containing family of proteins in plants and suggest that ERD7 may be involved in functional aspects of plant stress response that also include localization to the LD surface.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

In Situ and Post-Mortem Characterizations of Ultrasonic Spot Welded AZ31B and Coated Dual Phase 590 Steel Joints

Ultrasonic spot welding using different welding conditions was applied to join dissimilar metals of galvanized DP590 steel and AZ31B magnesium sheets. In situ high-speed imaging, digital image correlation, and infrared thermography were utilized to quantitatively study the interfacial relative motion, surface indentation, and heat generation across the joint faying interface and the sheet/sonotrode interfaces under the welding condition of moderate welding power and short welding time. For welds made with high power and long welding time, lap shear tensile tests as well as fatigue tests were carried out. Different fracture modes were observed after the lap shear tensile tests and fatigue tests performed under different peak loads. Post-weld cross-sectional analysis with scanning electron microscopy coupled with energy dispersive X-Ray spectroscopy revealed the variation of morphology and chemical composition at the joint interface for welds made with different welding conditions.

36 MATERIALS SCIENCE↗