Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Origins of Irreversibility in Layered NaNi x Fe y Mn z O 2 Cathode Materials for Sodium Ion Batteries

Layered NaNi x Fe y Mn z O 2 cathode (NFM) is of great interest in sodium ion batteries due to its high theoretical capacity and utilization of abundant, low-cost, environmentally-friendly raw materials. Nevertheless, there remains insufficient understanding on the concurrent local environment evolution in each transition metal (TM) that largely influences the reversibility of the cathode materials upon cycling. In this work, we investigate the reversibility of TM ions in layered NFMs with varying Fe contents and potential windows. Utilizing ex situ synchrotron X-ray absorption near edge spectroscopy (XANES) and extended X-ray absorption fine structure (EXAFS) of pre-cycled samples the valence and bonding evolution of the TMs are elucidated. It is found that Mn is electrochemically inactive as indicated by the insignificant change of Mn valence and Mn-O bonding distance. Fe is electrochemically inactive after the first five cycles. The Ni redox couple contributes most of the charge compensation for NFMs. Ni redox is quite reversible in the cathodes with less Fe contents. Furthermore, the Ni redox couple shows significant irreversibility with high Fe content of 0.8. The electrochemical reversibility of the NFM cathode becomes increasingly enhanced with the decrease of either Fe content or with lower upper charge cutoff potential.

25 ENERGY STORAGE↗
DOE OSTI2025

Interplay between multipolar order and multipole-induced superconductivity in PrTi 2 Al 20

Multipolar moments entail a new route to tackle frontier problems in superconductivity (SC). A key progress in the search for multipolar SC is the discovery of PrTr 2 Al 20 (Tr = Ti, V), which possesses quadrupolar and octupolar but no magnetic dipolar moments. The Kondo entanglement of these multipolar moments with conduction electrons leads to exotic SC within the multipolar ordered phase, though the precise nature of the SC remains unexplored. We experimentally investigate the SC gap structure of SC in PrTi 2 Al 20 and its La-doping evolution. Our results indicate deviations from a single s-wave gap, instead favoring nodal d-wave or multiple gaps. While the SC is robust against La dilution, the SC gap structure changes with minimal La doping, coinciding with a sharp change in the ferroquadrupolar (FQ) order. This suggests an intimate link between the quadrupolar order parameter and SC pairing, providing insight into the coexistence of SC with multipolar order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Doping-modulated strain control of bifunctional electrocatalysis for rechargeable zinc–air batteries

Changes in the local atomic arrangement in a crystal caused by lattice-mismatch-induced strain can efficiently regulate the performance of electrocatalysts for zinc–air batteries (ZABs) in many manners, mainly due to modulated electronic structure configurations that affect the adsorption energies for oxygen-intermediates formed during oxygen reduction and evolution reactions (ORR and OER). However, the application of strain engineering in electrocatalysis has been limited by the strain relaxation caused by structural instability such as dissolution and destruction, leading to insufficient durability towards the ORR/OER. In this work, we propose a doping strategy to modulate the phase transition and formation of self-supported cobalt fluoride–sulfide (CoFS) nanoporous films using a low amount of copper (Cu) as a dopant. This well-defined Cu–CoFS heterostructure overcomes the obstacle of structural instability. Our study of the proposed Cu–CoFS also helps establish the structure–property relationship of strained electrocatalysts by unraveling the role of local strain in regulating the electronic structure of the catalyst. As a proof-of-concept, the Cu–CoFS electrocatalyst with doping-modulated strain exhibited superior onset potentials of 0.91 V and 1.49 V for the ORR and OER, respectively, surpassing commercial Pt/C@RuO 2 and benchmarking non-platinum group metal (non-PGM) catalysts. ZABs with the Cu–CoFS catalyst delivered excellent charge/discharge cycling performance with an extremely low voltage gap of 0.5 V at a current density of 10 mA cm –2 and successively 0.93 V at a high current density of 100 mA cm –2 and afforded an outstanding peak power density of 255 mW cm –2 .

25 ENERGY STORAGE↗
DOE OSTI2022

Comparison of PsbQ and Psb27 in photosystem II provides insight into their roles

Photosystem II (PSII) catalyzes the oxidation of water at its active site that harbors a high-valent inorganic Mn 4 CaO x cluster called the oxygen-evolving complex (OEC). Extrinsic subunits generally serve to protect the OEC from reductants and stabilize the structure, but diversity in the extrinsic subunits exists between phototrophs. Recent cryo-electron microscopy experiments have provided new molecular structures of PSII with varied extrinsic subunits. We focus on the extrinsic subunit PsbQ, that binds to the mature PSII complex, and on Psb27, an extrinsic subunit involved in PSII biogenesis. PsbQ and Psb27 share a similar binding site and have a four-helix bundle tertiary structure, suggesting they are related. Here, we use sequence alignments, structural analyses, and binding simulations to compare PsbQ and Psb27 from different organisms. We find no evidence that PsbQ and Psb27 are related despite their similar structures and binding sites. Evolutionary divergence within PsbQ homologs from different lineages is high, probably due to their interactions with other extrinsic subunits that themselves exhibit vast diversity between lineages. This may result in functional variation as exemplified by large differences in their calculated binding energies. Psb27 homologs generally exhibit less divergence, which may be due to stronger evolutionary selection for certain residues that maintain its function during PSII biogenesis which is consistent with their more similar calculated binding energies between organisms. Previous experimental inconsistencies, low confidence binding simulations, and recent structural data suggest that Psb27 is likely to exhibit flexibility that may be an important characteristic of its activity. Furthermore, the analysis provides insight into the functions and evolution of PsbQ and Psb27, and an unusual example of proteins with similar tertiary structures and binding sites that probably serve different roles.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

The Milky Way Stellar Halo Is Twisted and Doubly Broken: Insights from DESI DR2 Milky Way Survey Observation

Using K giants from the second data release (DR2) of the Dark Energy Spectroscopic Instrument (DESI) Milky Way Survey, we measure the shape, orientation, radial profile, and density anisotropies of the Milky Way (MW) stellar halo over 8 kpc < r GC < 200 kpc. We identify a triaxial stellar halo (axis ratio 10:8:7), 43° tilted from the disk, showing two break radii at ∼16 and ∼76 kpc, likely associated with Gaia-Sausage/Enceladus and the Large Magellanic Cloud (LMC), respectively. The inner stellar halo (<30 kpc) is oblate and aligned with the disk, whereas the outer stellar halo becomes prolate and perpendicular to the disk, consistent with the vast polar structure of MW satellites. The twisted halo may arise from the disk−halo angular momentum shift triggered by the infall of a massive satellite. The anisotropic density distribution of the stellar halo is also measured, with successful reidentification of the Hercules-Aquila Cloud North/South (HAC-N/S) overdensity and the Virgo overdensity (VOD). Break radii are found at 15 and 30 kpc for VOD and HAC-N/S, respectively. We identify the LMC transient density wake with a break radius at 60 kpc in the Pisces overdensity region. We also find new observational evidence of the LMC collective density wake, by showing a break radius at ∼100 kpc in the northern Galactic cap with a clear density peak at 90 kpc. In the end, we found that more metal-poor halo stars are more radially extended. Our results provide important clues to the assembly and evolution of the MW stellar halo under the standard cosmic structure formation framework.

Li, Songting [Shanghai Jiao Tong Univ. (China); DE↗
DOE OSTI2025

Isotope-dependent Tafel analysis probes proton transfer kinetics during electrocatalytic water splitting

Proton transfer plays an important role in both hydrogen and oxygen evolution reactions during electrocatalytic water splitting to produce green hydrogen. However, directly adapting the conventional proton/deuterium kinetic isotope effect to study proton transfer in heterogeneous electrocatalytic processes is challenging. Here we propose using the shift in the Tafel slope between protic and deuteric electrolytes, or the Tafel slope isotope effect, as an effective probe of proton transfer characteristics. Comparison of the Tafel slope isotope effect for diverse hydrogen and oxygen evolution reaction electrocatalysts in different pH environments reveals that proton transfer is both pH and structure dependent. Using ruthenium oxide as an example, we show that local structure modification can change the rate-determining step from an electrochemical, concerted proton–electron transfer step to a chemical step and improve the oxygen evolution activity in acid. The isotope-dependent Tafel analysis will facilitate a better understanding of the proton transfer behaviours during electrocatalytic processes and provide guidance for designing efficient electrocatalysts.

Chemistry↗
DOE OSTI2025

Differential equations for cosmological correlators

Cosmological fluctuations retain a memory of the physics that generated them in their spatial correlations. The strength of correlations varies smoothly as a function of external kinematics, which is encoded in differential equations satisfied by cosmological correlation functions. In this work, we provide a broader perspective on the origin and structure of these differential equations. As a concrete example, we study conformally coupled scalar fields in a power-law cosmology. The wavefunction coefficients in this model have integral representations, with the integrands being the product of the corresponding flat-space results and “twist factors” that depend on the cosmological evolution. Similar twisted integrals arise for loop amplitudes in dimensional regularization, and their recent study has led to the discovery of rich mathematical structures and powerful new tools for computing multi-loop Feynman integrals in quantum field theory. The integrals of interest in cosmology are also part of a finite-dimensional basis of master integrals, which satisfy a system of first-order differential equations. We develop a formalism to derive these differential equations for arbitrary tree graphs. The results can be represented in graphical form by associating the singularities of the differential equations with a set of graph tubings. Upon differentiation, these tubings grow in a local and predictive fashion. In fact, a few remarkably simple rules allow us to predict — by hand — the equations for all tree graphs. While the rules of this “kinematic flow” are defined purely in terms of data on the boundary of the spacetime, they reflect the physics of bulk time evolution. We also study the analogous structures in tr ϕ 3 theory, and see some glimpses of hidden structure in the sum over planar graphs. This suggests that there is an autonomous combinatorial or geometric construction from which cosmological correlations, and the associated spacetime, emerge.

Cosmological models↗
DOE OSTI2022

Successive neutron alignments in the yrast, negative-parity band of oblate-deformed Tl 199

The negative-parity band structure built on the proton h 9/2 state in 199 Tl has been established up to an excitation energy of 7 MeV and spin of (51/2) ℏ. The level scheme has been extended with the inclusion of fourteen new transitions de-exciting levels at high spin. The ΔI = 1 γ rays are found to be more prominently visible in the spectra when comparing to Δ I = 2 transitions. Rotation alignments are evident at frequencies of 0.22 and 0.30 MeV with both being attributed to the breaking of pairs of neutrons in the i 13/2 subshell. Since 199 Tl is expected to have weak oblate deformation, and lies in a transitional region where competing contributions to the spin are expected from collective rotation and the angular momentum of high-j nucleons, calculations using both the principal axis cranking (PAC) and tilted axis cranking (TAC) formalisms have been performed to understand its structure. Both the PAC and TAC calculations are found to provide a satisfactory description of the evolution of excitation energies with spin. The PAC calculations give a good account of the experimental crossing frequencies and associated spins. Furthermore, the structure of the yrast, negative-parity band in 199 Tl may be primarily understood in terms of the collective rotation of a moderately deformed oblate nucleus, along with contributions to the angular momentum from two pairs of rotation-aligned i 13/2 neutrons.

190 ≤ A ≤ 219↗
DOE OSTI2026

ODIN: Confirmation and 3D Reconstruction of Six Massive Protoclusters at Cosmic Noon

Protoclusters represent sites of accelerated galaxy formation and extreme astrophysical activity characteristic of dense environments. Identifying massive protoclusters and mapping their spatial structures are therefore crucial for understanding how large-scale environment influences galaxy evolution. We combine wide-field Lyα imaging from the One-hundred-deg$^{2}$ DECam Imaging in Narrowbands survey with extensive Dark Energy Spectroscopic Instrument and ancillary spectroscopy across the extended COSMOS and XMM Large Scale Structure (LSS) fields (≈14 deg$^{2}$) to search for massive protoclusters. We confirm six systems at z ≈ 2.4 and ≈ 3.1, including three newly identified structures and three which overlap with previously known structures and/or systems detected using other tracers. We reconstruct their three-dimensional structures, estimate descendant halo masses, and for one structure at z ≈ 3.12, demonstrate that overlapping narrowband filters (NB497 and N501) provide accurate redshift tomography for emission-line galaxies. One protocluster at z ≈ 2.45 overlaps with one of the LATIS tomographic fields, enabling direct comparison between galaxy and H i overdensities traced by Lyα forest absorption. Another at z ≈ 3.12 hosts a massive quiescent galaxy (M$_{*}$ ≈ 1.2 × 10$^{11}$M$_{⊙}$), suggesting that overdense environments may play a role in accelerating galaxy assembly and quenching. Comparing Lyα emission properties across environments, we find that protocluster galaxies exhibit higher median line fluxes and a deficit of faint emitters relative to the field. The effect is strongest when combining 2D and 3D density information, indicating that galaxies in the densest protocluster cores are most affected by environmental processes. This effect is stronger at z ≈ 3.1 than at z ≈ 2.4, suggesting possible redshift evolution.

Ortiz, Ashley [Purdue U.] (ORCID:000900083184304X)↗
DOE OSTI2019

Active site plasticity and possible modes of chemical inhibition of the human DNA deaminase APOBEC3B

The single-stranded DNA cytosine deaminase APOBEC3B (A3B) functions in innate immunity against viruses, but it is also strongly implicated in eliciting mutations in cancer genomes. Because of the critical role of A3B in promoting virus and tumor evolution, small molecule inhibitors are desirable. However, there is no reported structure for any of the APOBEC3-family enzymes in complex with a small molecule bound in the active site, which hampers the development of small molecules targeting A3B. Here we report high-resolution structures of an active A3B catalytic domain chimera with loop 7 residues exchanged with those from the corresponding region of APOBEC3G (A3G). The structures reveal novel open conformations lacking the catalytically essential zinc ion, with the highly conserved active site residues extensively rearranged. These inactive conformations are stabilized by 2-pyrimidone or an iodide ion bound in the active site. Molecular dynamics simulations corroborate the remarkable plasticity of the engineered active site and identify key interactions that stabilize the native A3B active site. These data provide insights into A3B active site dynamics and suggest possible modes of its inhibition by small molecules, which would aid in rational design of selective A3B inhibitors for constraining virus and tumor evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The evolution of dam induced river fragmentation in the United States

It is established that dams decrease river connectivity; however, previous global scale studies of river fragmentation focused on a small subset of the largest dams. In the United States, mid-sized dams, which are too small for global databases, account for 96% of major anthropogenic structures and 48% of reservoir storage. We conduct a national evaluation of the evolution of anthropogenic river bifurcation over time that includes more than 50,000 nationally inventoried dams. Mid-sized dams account for 73% of anthropogenically created stream fragments nationally. They also contribute disproportionately to short fragments (less than 10 km), which is particularly troubling for aquatic habitats. Here we show that dam construction has essentially reversed natural fragmentation patterns in the United States. Prior to human development, smaller river fragments and less connected networks occurred in arid basins while today we show that humid basins are the most fragmented due to human structures.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Instability and evolution of the magnetic ground state in metallic perovskites GdRh 3 C 1-x B x

In this paper, we report investigations of the structural, magnetic, electrical transport and thermal properties of five compositions of the metallic perovskite GdRh 3 C 1–x B x (0.00 ≤ x ≤ 1.00). Our results show that all the five compositions undergo magnetic ordering at low temperatures, but the nature of the ordered state is significantly different in the carbon- and the boron-rich compositions, where the former shows signatures of an amplitude-modulated magnetic structure and the latter exhibits evidences of an equal-moment incommensurate antiferromagnetic ordering. We also observe a remarkable field-dependent evolution of conduction carrier polarization in the compositionally disordered compounds. The outcomes indicate that this system is energetically situated in proximity to a magnetic instability where small variations in the control parameter(s), such as lattice constant and/or electron density, lead to considerably different ground states.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Role of quadrupole deformation and continuum effects in the “island of inversion” nuclei 28,29,31 F

The peculiar properties of nuclei in the so-called “island of inversion” around Z = 10 and N = 20 are the focus of current nuclear physics research. Recent studies showed that 28 F has a negative-parity ground state and thus lies within the southern shore of the island of inversion, and 29 F presents a halo structure in its ground state, but it is unclear which effects, such as deformation, shell evolution due to tensor forces, or couplings to the continuum, lead to this situation. Here, we investigate the role of quadrupole deformation and continuum effects on the single-particle structure of 28,29,31 F from a relativistic mean-field approach and show how both phenomena can lead to a negative-parity ground state in 28 F and halo structures in 29,31 F. We solve the Dirac equation in the complex-momentum (Berggren) representation for a potential with quadrupole deformation at the first order obtained from relativistic mean-field calculations using the NL3 interaction and calculate the continuum level densities using the Green’s function method. We extract single-particle energies and widths from the continuum level densities to construct the Nilsson diagrams of 28,29,31 F in the continuum and analyze the evolution of both the widths and occupation probabilities of relevant Nilsson orbitals in 28 F and find that some amount of prolate deformation must be present. In addition, we calculate the density distributions for bound Nilsson orbitals near the Fermi surface in 29,31 F and reveal that, for a quadrupole deformation 0.3 ≤ β 2 ≤ 0.45 (prolate), characteristic halo tails appear at large distances. Using the relativistic mean-field approach in the complex-momentum representation with the Green’s function method, we demonstrate that in neutron-rich fluorine isotopes, while in the spherical case the pf shells are already inverted and close to the neutron emission threshold, a small amount of quadrupole deformation can dramatically reduce the gap between positive- and negative-parity states and increase the role of continuum states, ultimately leading to the negative parity in the ground state of 28 F and the halo structures in 29,31 F.

20 ≤ A ≤ 38↗
DOE OSTI2023

Evolution of microstructure and strength of a high entropy alloy undergoing the strain-induced martensitic transformation

In a recent work, we have reported outstanding strength and work hardening exhibited by a metastable high entropy alloy (HEA), Fe 42 Mn 28 Co 10 Cr 15 Si 5 (in at. %), undergoing the strain-induced martensitic transformation from metastable gamma austenite (γ) to stable epsilon martensite (ε). However, the alloy exhibited poor ductility, which was attributed to the presence of the brittle sigma (σ) phase in its microstructure. The present work reports the evolution of microstructure, strength, and ductility of a similar HEA, Fe 38.5 Mn 20 Co 20 Cr 15 Si 5 Cu 1.5 (in at. %), designed to suppress the formation of σ phase. A cast and then rolled plate of the alloy was processed into four conditions by annealing for 10 and 30 min at 1100 °C and by friction stir processing (FSP) at tool rotation rates of 150 and 400 revolutions per minute (RPM) to facilitate detailed examinations of variable initial grain structures. Neutron diffraction and electron microscopy were employed to characterize the microstructure and texture evolution. The initial materials had variable grain size but nearly 100% γ structure. Diffusionless strain induced γ→ε phase transformation took place under compression with higher rate initially and slower rate at the later stages of deformation, independent on the initial grain size. The transformation facilitated part of plastic strain accommodation and rapid strain hardening owing to a transformation-induced dynamic Hall-Petch-type barrier effect, increase in dislocation density, and texture. Here, the peak strength of nearly 2 GPa was achieved under compression using the structure created by double pass FSP (150 RPM followed by 150 RPM). Remarkably, the tensile elongation exhibited by the alloy was nearly 20% with fracture surfaces featuring a combination of ductile dimples and cleavage.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electronic Structure, Chemical Bonding and Electrocatalytic Activity of Novel Ba(Fe0.7Ta0.3)O3-d Compounds

Ba(Fe0.7Ta0.3)O3-d (BFTO) compounds were synthesized using conventional, high-temperature solid-state ceramic reaction method by varying the sintering temperature (Ts=1200-1350 °C). The crystal structure, electronic structure and electrocatalytic activity of BFTO compounds were evaluated. Processing temperature induced phase transformations and structural quality influences the electronic structure and electrocatalytic activity of BFTO compounds. At Ts=1200 oC, Ba(Fe0.7Ta0.3)O3-d stabilizes in mixed phase of orthorhombic + rhombohedral phase (Amm2 + R3m). With increasing Ts (=1250 oC), Ba(Fe0.7Ta0.3)O3-d ceramics stabilize in tetragonal + rhombohedral [P4mm + R3m] mixed phase with a variation in the quantity of respective phases. High-resolution X-ray photoelectron spectroscopy of constituent elements, namely, Ba 3d, Fe2p, Ta 4f and O 1s reveal the electronic structure changes due to changes in chemical environment resulted from structural transformation. The electrocatalytic activity of BFTO was evaluated towards hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). Though all the samples demonstrated appreciable electrocatalytic properties, the best electrochemical catalytic activity was shown by BFTO samples sintered at 1350 °C. BFTO-1350 oC showed an onset potential of -0.690 V vs. RHE for HER and an onset potential of 0.73 V vs. RHE for ORR indicating its significant electrocatalytic performance. A general increase in activity with sintering temperature is potentially due to the improved structural quality of the BFTO ceramics. In addition to offering the fundamental insights into solid state materials based on doped BaTiO3 for electrocatalysis, the present work may contribute to the design and development of materials for high-temperature electrocatalytic converters.

Ba(Fe0.7Ta0.3)O3-d, Phase Transformation↗
DOE OSTI2021

Materials Challenges and Opportunities for Energy Generation, Conversion, Delivery, and Storage (Applied Energy Tri-Laboratory Consortium Workshop Report)

This report documents the outcomes of the Tri-Laboratory Materials Workshop that was held July 31 and August 1, 2019 to begin addressing the needs, opportunities, and challenges associated with the development, fabrication, and testing of the needed materials and components for integrated hybrid energy systems (i.e., incorporating nuclear, fossil, and renewables for electric and thermal applications). This was accomplished by assembling the research program leads and principal investigators at Idaho National Laboratory (INL), National Energy Technology Laboratory (NETL), and National Renewable Energy Laboratory (NREL), who support the research and development of new technology and system integration. The team then identified and prioritized key materials development needs. This effort was intended to enhance communications and synergy among the Tri-Lab partners. Advanced functional and structural materials are central to transformative energy technologies for energy generation, conversion, delivery, and storage. With that in mind, the workshop focused on identifying and assessing the foundational materials research needs at both the basic and applied levels. Materials challenges include the ability to withstand harsh environments, such as high temperatures and pressures, corrosion, oxidation, or irradiation while maintaining flexible mission profiles and long service lifespans. Advanced energy system material challenges and needs range from materials for the capture, upgrading/concentration, storage, and delivery of low-grade heat to materials for high temperature environments that involve liquid metals, molten salt, and very high temperature gas heat delivery and storage systems. Material improvements are needed for hybrid energy systems due to accelerated corrosion and stress-fatigue failure of materials and equipment, which results from increased frequency and amplitude of thermal, mechanical, and electrical cycling of systems components. Multifunctional materials are needed for high temperature solid-oxide fuel cells, advanced electrochemical reactors, and in-process separation. Relative to materials manufacturing, application of advanced additive and subtractive methods need to be understood to develop both thin-layer homogenous materials and materials of graded composition. Materials modeling and machine learning will be critical to accelerate the design and production of power electronics, and nuclear reactor materials and fuel, as well as to gain an understanding of beneficial materials phenomena or deleterious microstructure evolution. There is also a need for standardized models, computational structures, data reporting protocols and modeling tools across the three laboratories. This would allow consistent results, analysis, and data sharing. Combining computational capabilities between the three laboratories (e.g., hardware, software) would greatly increase computational capabilities and throughput. The workshop identified the need for laboratories to anticipate and address problems that will occur during scale-up. Laboratory work must connect with industry to ensure that research focuses on processes that are scalable and marketable. Industry input and perspective are essential to guide laboratory research to meet these requirements and deploy new technology in industrial demonstrations. Another aspect of scale-up is the integration of multiple systems since new challenges often arise at the subsystem interfaces. Establishing a scale-up manufacturing demonstration/pilot plant, potentially as an industrial user facility, would be beneficial to the laboratories and industry. That modular scale-up manufacturing demonstration/pilot plant would allow researchers to find and resolve interface problems that cannot be identified by focusing only on individual parts. Communication exchanges among the organizers, attendees, and workshop survey responses indicate that the workshop was successful in achieving its goal to identify key technology gaps and research needs. Strong positive feedback was received on the sharing of ideas, capabilities, talent, and passion to move forward on the materials-related action items.

36 MATERIALS SCIENCE↗