Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sparse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

The effect of modeling dose uncertainty on low-boom community noise dose-response curves

In logistic dose-response modeling, failing to account for uncertainty in estimated doses can cause an artificial flattening or attenuation of the slope of the summary curve. In Lee et al. [J. Acoust. Soc. Am. 147(4), pp. 2222-2234 (2020)], data from two NASA low-amplitude sonic boom community noise survey tests were modeled using a Bayesian multilevel logistic regression (MLR) statistical model that assumed there was no uncertainty in the noise dose estimates. However, in these community tests, the noise dose uncertainty was estimated by Page et al. [NASA/CR-2014-218180 and NASA/CR-2020-220589/Volume I] using a leave-one-out method. In the current work, a term was added to extend the Bayesian MLR model to account for the estimated noise dose uncertainty quantified in the Page et al. analyses. This uncertainty term was included in two ways, either as classical or as Berkson uncertainty, and yield similar results. When the uncertainty is accounted for in the Bayesian MLR model, the dose-response curves become 5-10% steeper, but the difference in the noise dose that elicits a 5% highly annoyed response is small (less than 1 dB). This result is encouraging for future X-59 community tests whose survey area will be sparsely populated with noise monitors.

X-59↗
NASA NTRSDate not supplied

Assessing Land Cover Change Dynamics in the Peruvian Amazon to Map Outbreak Risk and Inform Public Health Interventions for Zoonotic Disease Prevention

Dengue fever and leishmaniasis are two tropical diseases prevalent in Madre de Dios Region of Peru and have been associated with urbanization and road construction. Rapid land use changes such as mining, timber harvesting, and hydroelectric dam development lead to denser human presence in previously sparsely-populated areas which increases the proximity of human settlements to zoonotic disease vectors. In partnership with the Peruvian Ministries of Health (MINSA), the Environment (MINAM), and other in-country collaborators, a NASA DEVELOP team examined Land Use Land Cover (LULC) changes and reported dengue and leishmaniasis incidence in the Madre de Dios region. This sought to help MINSA and MINAM understand the spatial relationship between land use change and zoonotic disease incidence. We created a LULC classification script using Google Earth Engine (GEE) with Landsat 5 Thematic Mapper (TM) and Landsat 8 Operational Land Imager (OLI) imagery to classify land cover in 2010, 2015, and 2020 and evaluate changes over this time period. The team then compared the quantified results of the LULC assessment in conjunction with reported disease cases to evaluate disease incidence and key land cover changes across Madre de Dios’s 11 districts. Follow on work will use these products to develop more detailed outbreak risk maps. These products will allow MINSA, MINAM, and other partners to understand hotspots of land cover change in Peru and the relationship with outbreaks to inform public health decision makers and environmental policy.

Nataly Chacon-Buitrago↗
NASA NTRS2021

Reconciling Assumptions in Bottom-up and Top-down Approaches for Estimating Aerosol Emission Rates from Wildland Fires using Observations from FIREX-AQ

Accurate fire emissions inventories are crucial to predict the impacts of wildland fires on air quality and atmospheric composition. Two traditional approaches are widely used to calculate fire emissions: a satellite-based top-down approach and a fuels-based bottom-up approach. However, these methods often considerably disagree on the amount of particulate mass emitted from fires. Previously available observational datasets tended to be sparse, and lacked the statistics needed to resolve these methodological discrepancies. Here, we leverage the extensive and comprehensive airborne in situ and remote sensing measurements of smoke plumes from the recent Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) campaign to statistically assess the skill of the two traditional approaches. We use detailed campaign observations to calculate and compare emission rates at an exceptionally high-resolution using three separate approaches: top-down, bottom-up, and a novel approach based entirely on integrated airborne in situ measurements. We then compute the daily average of these high-resolution estimates and compare with estimates from lower resolution, global top-down and bottom-up inventories. We uncover strong, linear relationships between all of the high-resolution emission rate estimates in aggregate, however no single approach is capable of capturing the emission characteristics of every fire. Global inventory emission rate estimates exhibited weaker correlations with the high-resolution approaches and displayed evidence of systematic bias. The disparity between the low resolution global inventories and the high-resolution approaches is likely caused by high levels of uncertainty in essential variables used in bottom-up inventories and imperfect assumptions in top-down inventories. Plain Language Summary Smoke emitted by wildland fires is dangerous to human health and contributes to climate change.To predict and evaluate the impacts of fires, we need to know how much smoke is emitted into the atmosphere. There are two state-of-the-art methods used to estimate the mass of smoke emitted by fires, but they often disagree. In this study, we use unusually detailed measurements collected using an aircraft that flew within wildland fire smoke plumes to calculate the amount ofsmoke emitted from fires in the Western United States. We compare emission rates derived from the exceptionally high spatial and temporal resolution approach to the two traditional, lower resolution approaches to understand why they sometimes diverge

E B Wiggins↗
NASA NTRS2021

Assimilation of DAWN Doppler Wind Lidar Data During the 2017 Convective Processes Experiment (CPEX): Impact on Precipitation and Flow Structure

An improved representation of 3-D air motion and precipitation structure through forecast models and assimilation of observations is vital for improvements in weather forecasting capabilities. However, there are few independent data to properly validate a model forecast of precipitation structure when the underlying dynamics are evolving on short convective timescales. Using data from the JPL Ku/Ka-band Airborne Precipitation Radar (APR-2) and the 2 μmDoppler Aerosol Wind (DAWN) lidar collected during the2017 Convective Processes Experiment (CPEX), the NASA Unified Weather Research and Forecasting (WRF) Ensemble Data Assimilation System (EDAS) modeling system was used to quantify the impact of high-resolution sparsely sampled DAWN measurements on the analyzed variables and on the forecast when the DAWN winds were assimilated. Over-all, the assimilation of the DAWN wind profiles had a discernible impact on the wind field as well as the evolution and timing of the 3-D precipitation structure. Analysis of individual variables revealed that the assimilation of the DAWN winds resulted in important and coherent modifications of the environment. It led to an increase in the near-surface convergence, temperature, and water vapor, creating more favorable conditions for the development of convection exactly where it was observed (but not present in the control run). Comparison to APR-2 and observations by the Global Precipitation Measurement (GPM) satellite shows a much-improved forecast after the assimilation of the DAWN winds – development of precipitation where there was none, more organized precipitation where there was some, and a much more intense and organized cold pool, similar to the analysis of the dropsonde data. The onset of the vertical evolution of the precipitation showed similar radar-derived cloud-top heights, but delayed in time. While this investigation was limited to a single CPEX flight date, the investigation design is appropriate for further investigation of the impact of airborne Doppler wind lidar observations upon short-term convective precipitation forecasts

DAWN↗
NASA NTRSDate not supplied

Verb Sense Disambiguation for Densifying Knowledge Graphs in Earth Science

We begin with an ambitious goal: to create a knowledge graph that spans the entire discipline of Earth science. In order to achieve this, we need to apply Natural Language Processing (NLP) techniques on Earth science journal articles to extract their semantic components for the graph. When sentences from Earth science journal articles are broken down into their semantic components and loaded onto a graph, the relationships among these semantic components are represented by the verbs in the sentences. However, since there are multiple verbs in English that can be used to denote the same meaning, the knowledge graph can become sparse and so can the results when we query the graph. In order to ensure quality results, it would be desirable to consolidate similar verbs into a single "class". So, this is the problem at hand: how do we make sure that multiple verbs that mean the same thing are represented as a single class of verb in the knowledge graph? Or in other words, how do we distinguish which meaning a particular verb takes given a particular sentence? In this poster, we demonstrate a potential technique to solve this problem.

Ashish Acharya↗
NASA NTRS2021

Improved Rainfall Data in the Philippines through Concurrent Use of GPM IMERG and Ground-Based Measurements

The availability of accurate and reliable rainfall data that are applicable to various phenomenological, climatological, and modeling studies is important, especially in the Philippines, which is considered to be highly vulnerable to natural hazards and a changing climate. The presented strategy involved constructing a dataset consisting of synoptic data, automatic rain gauge (ARG) measurements, and satellite data that are co-registered, consistent, and formatted in the same manner. Although sparse in number, the synoptic stations provide the most accurate rainfall information and were used as the baseline for creating the dataset. The ARGs that are within a distance of 1 km to the synoptic stations were used to determine the correction factors needed to make the synoptic and ARG data consistent. Subsequently, the corrected ARGs were used to make the satellite IMERG data consistent with both ARG and synoptic data. In case of the latter, only IMERG pixels with at least 10 ARGs within the relatively large footprint of the satellite sensor were used in estimating the required correction parameters derived from a combination of a power transform and linear regression correction techniques. The final results show good agreement of synoptic and corrected ARG data with correlation coefficients of 0.94 and 0.97 for the 10 day and monthly data, respectively, and improvement in the linear regression slope from 0.67 to 0.90 for 10 day data, and 0.70 to 0.94 for monthly data. In addition, the corrected ARG data agree well with the corrected IMERG data, with correlation coefficients of 0.88 and 0.93 for the 10 day and monthly data, respectively, and an improvement in slope from 0.66 to 0.87 for 10 day data, and 0.74 to 0.99 for monthly data. The merit of using a combined dataset is illustrated through comparative analyses of the IMERG data and spatially interpolated synoptic and ARG data. The results show general agreements in spatial patterns of rainfall across the datasets, especially in areas where in situ measurements are recorded. The observed discrepancy when ground data is limited emphasizes the need for satellite IMERG data to obtain the true spatial patterns of rainfall distribution.

rainfall↗
NASA NTRS2021

Measurements of Rainfall Rate, Drop Size Distribution, and Variability at Middle and Higher Latitudes: Application to the Combined DPR-GMI Algorithm

The Global Precipitation Measurement mission is a major U.S.–Japan joint mission to understand the physics of the Earth’s global precipitation as a key component of its weather, climate, and hydrological systems. The core satellite carries a dual-precipitation radar and an advanced microwave imager which provide measurements to retrieve the drop size distribution (DSD) and rain rates using a Combined Radar-Radiometer Algorithm (CORRA). Our objective is to validate key assumptions and parameterizations in CORRA and enable improved estimation of precipitation products, especially in the middle-to-higher latitudes in both hemispheres. The DSD parameters and statistical relationships between DSD parameters and radar measurements are a central part of the rainfall retrieval algorithm, which is complicated by regimes where DSD measurements are abysmally sparse (over the open ocean). In view of this, we have assembled optical disdrometer datasets gathered by research vessels, ground stations, and aircrafts to simulate radar observables and validate the scattering lookup tables used in CORRA. The joint use of all DSD datasets spans a large range of drop concentrations and characteristic drop diameters. The scaling normalization of DSDs defines an intercept parameter N(W), which normalizes the concentrations, and a scaling diameter D(m), which compresses or stretches the diameter coordinate axis. A major finding of this study is that a single relationship between N(W) and D(m), on average, unifies all datasets included, from stratocumulus to heavier rainfall regimes. A comparison with the N(W)–D(m) relation used as a constraint in versions 6 and 7 of CORRA highlights the scope for improvement of rainfall retrievals for small drops (D(m) < 1 mm) and large drops (D(m) > 2 mm). The normalized specific attenuation–reflectivity relationships used in the combined algorithm are also found to match well the equivalent relationships derived using DSDs from the three datasets, suggesting that the currently assumed lookup tables are not a major source of uncertainty in the combined algorithm rainfall estimates.

Viswanathan Bringi↗
NASA NTRS2022

Midwest Water Resources: Developing an Evapotranspiration Climatology to Analyze Spatiotemporal Water Budget Patterns for Agriculture and Natural Resources Managers in the Midwest

Evapotranspiration (ET) is a climatic variable critical to the hydrologic cycle and is used to evaluate spatiotemporal trends in drought conditions. Although in-situ observations provide accurate ET information, these records are spatially sparse. The United States Department of Agriculture (USDA) Midwest Climate Hub, National Integrated Drought Information System, Minnesota Department of Agriculture, Michigan State University, and the USDA Foreign Agricultural Service have partnered with DEVELOP to gain new insights on spatiotemporal patterns of ET with NASA satellite data. This project evaluates the feasibility of using remotely sensed ET data products to understand trends from 2001 through 2020. Actual ET (aET) data were sourced from NASA’s Terra Moderate Resolution Imaging Spectroradiometer (MODIS), and reference ET (refET) and precipitation data were sourced from the Gridded Surface Meteorological Dataset (gridMET). Spatial and temporal differences in the MODIS and gridMET data sets were resolved such that gridded data could be compared. These data sets were then used to produce monthly Normals maps of mm/8-day of precipitation, aET, and refET. Using precipitation and ET Normals maps, hydrologic state maps were produced by subtracting either refET or aET from precipitation. These hydrologic state maps provide a proxy water balance by summarizing the difference between water entering and leaving the ground surface. Additionally, the ET products were compared in timeseries plots. The ET products from this project provided partners with comparable datasets to assess potential drought and flooding conditions to support Midwest agricultural and natural resource managers in decision-making.

Emma Myrick↗
NASA NTRS2021

Air Pollution Scenario over Pakistan: Characterization and Ranking of Extremely Polluted Cities using Long-Term Concentrations of Aerosols and Trace Gases

Pakistan ranks third in the world in terms of mortality attributable to air pollution, with aerosol mass concentrations (PM2.5) consistently well above WHO (World Health Organization) air quality guidelines (AQG). However, regulation is dependent on a sparse network of air quality monitoring stations and insufficient ground data. This study utilizes long-term observations of aerosols and trace gases to characterize and rank the air pollution scenarios and pollution characteristics of 80 selected cities in Pakistan. Datasets used include (1) the Aqua and Terra (AquaTerra) MODIS (Moderate Resolution Imaging Spectroradiometer) Level 2 Collection 6.1 merged Dark Target and Deep Blue (DTB) aerosol optical depth (AOD) retrieval products; (2) the CAMS (Copernicus Atmosphere Monitoring Service) reanalysis PM1, PM2.5, and PM10 data; (3) the MERRA-2 (Modern-Era Retrospective analysis for Research and Applications, Version 2) reanalysis PM2.5 data, (4) the OMI (Ozone Monitoring Instrument) tropospheric vertical column density (TVCD) of nitrogen dioxide (NO2), and VCD of sulfur dioxide (SO2) in the Planetary Boundary Layer (PBL), (5) the VIIRS (Visible Infrared Imaging Radiometer Suite) Nighttime Lights data, (6) MODIS Collection 6 Version 2 global monthly fire location data (MCD14ML), (7) population density, (8) MODIS Level 3 Collection 6 land cover types, (9) AERONET (AErosol RObotic NETwork) Version 3 Level 2.0 data, and (10) ground-based PM2.5 concentrations from air quality monitoring stations. Potential Source Contribution Function (PSCF) analyses were performed by integrating with ground-based PM2.5 concentrations and the NOAA (National Oceanic and Atmospheric Administration) HYSPLIT (Hybrid Single-Particle Lagrangian Integrated Trajectory) air parcel back trajectories to identify potential pollution source areas which are responsible for extreme air pollution in Pakistan. Results show that the ranking of the top polluted cities depends on the type of pollutant considered and the metric used. For example, Jhang, Multan, and Vehari were characterized as the top three polluted cities in Pakistan when considering AquaTerra DTB AOD products; for PM1, PM2.5, and PM10 Lahore, Gujranwala, and Okara were the top three; for tropospheric NO2 VCD Lahore, Rawalpindi, and Islamabad and for PBL SO2 VCD Lahore, Mirpur, and Gujranwala. The results demonstrate that Pakistan’s entire population has been exposed to high PM2.5 concentrations for many years, with a mean annual value of 54.7 μg/cu. m, over all Pakistan from 2003 to 2020. This value exceeds Pakistan’s National Environmental Quality Standards (Pak-NEQS, i.e., <15 μg/cu. m annual mean) for ambient air defined by the Pakistan Environmental Protection Agency (Pak-EPA) as well as the WHO Interim Target-1 (i.e., mean annual PM2.5 <35 μg/cu. m). The spatial analyses of the concentrations of aerosols and trace gases in terms of population density, nighttime lights, land cover types, and fire location data, and the PSCF analysis indicate that Pakistan’s air quality is strongly affected by anthropogenic sources inside of Pakistan, with contributions from surrounding countries. Statistically significant positive (increasing) trends in PM1, PM2.5, PM10, tropospheric NO2 VCD, and SO2 VCD were observed in ~89%, ~67%, ~48%, 91%, and ~88% of the Pakistani cities (80 cities), respectively. This comprehensive analysis of aerosol and trace gas levels, their characteristics in spatio-temporal domains, and their trends over Pakistan, is the first of its kind. Results will be helpful to the Ministry of Climate Change (Government of Pakistan), Pak-EPA, SUPARCO (Pakistan Space and Upper Atmosphere Research Commission), policymakers, and the local research community to mitigate air pollution and its effects on human health.

Muhammad Bilal↗
NASA NTRSDate not supplied

Understanding Olivine and Pyroxene in Chondritic IDPs

There is a widespread depletion of Cr from the FeO-rich olivine in Wild-2, relative to type IIA chondrules(Frank et al., 2014)-the degree of this depletion is akin to that in unequilibrated chondrites such as Krymka (LL3.2) or Rainbow (CO3.2).Since Cr is highly mobile under even mild thermal metamorphism(as low as 200ºC), it is a sensitive indicator of such an event, showing greater depletion in smaller grains (i.e., matrix vs. chondrules) (Grossman and Brearley, 2005). Grossman and Brearley (2005) found that the distribution of Cr in FeO-rich olivine systematically changes as metamorphism increases between type 3.0 and type 3.2. Thus, Wild-2 olivine appears to carry evidence of mild thermal metamorphism. It is critical to determine whether there is any evidence for this from samples of other comets. For this we can examine an hydrous chondritic IDPs. Unfortunately, the data for olivine and pyroxene in IDPs is sparse, mainly decades old and lacks useful information on minor elements. We have begun to collect new compositional data for olivine and pyroxene in chondritic interplanetary dust particles (filling a major gap in our knowledge, as approximately half of these grains derive from comets), to determine whether the results obtained for Wild-2 are typical for comets in general, or whether Wild-2 (or its accretion components) has experienced an atypical geological history. A determination that a comet, or its accretion components, had experienced significant thermal metamorphism would greatly alter models of early solar system history.

Michael Zolensky↗
NASA NTRS2021

FLUXNET-CH4: a global, multi-ecosystem dataset and analysis of methane seasonality from freshwater wetlands

Methane (CH4) emissions from natural landscapes constitute roughly half of global CH4 contributions to the atmosphere, yet large uncertainties remain in the absolute magnitude and the seasonality of emission quantities and drivers. Eddy covariance (EC) measurements of CH4 flux are ideal for constraining ecosystem-scale CH4 emissions due to quasi-continuous and high-temporal-resolution CH4 flux measurements, coincident carbon dioxide, water, and energy flux measurements, lack of ecosystem disturbance, and increased availability of datasets over the last decade. Here, we (1) describe the newly published dataset, FLUXNET-CH4 Version 1.0, the first open-source global dataset of CH4 EC measurements (available at https://fluxnet.org/data/fluxnet-ch4-community-product/, last access: 7 April 2021). FLUXNET-CH4 includes half-hourly and daily gap-filled and non-gap-filled aggregated CH4 fluxes and meteorological data from 79 sites globally: 42 freshwater wetlands, 6 brackish and saline wetlands, 7 formerly drained ecosystems, 7 rice paddy sites, 2 lakes, and 15 uplands. Then, we (2) evaluate FLUXNET-CH4 representativeness for freshwater wetland coverage globally because the majority of sites in FLUXNET-CH4 Version 1.0 are freshwater wetlands which are a substantial source of total atmospheric CH4 emissions; and (3) we provide the first global estimates of the seasonal variability and seasonality predictors of freshwater wetland CH4 fluxes. Our representativeness analysis suggests that the freshwater wetland sites in the dataset cover global wetland bioclimatic attributes (encompassing energy, moisture, and vegetation-related parameters) in arctic, boreal, and temperate regions but only sparsely cover humid tropical regions. Seasonality metrics of wetland CH4 emissions vary considerably across latitudinal bands. In freshwater wetlands (except those between 20°S to 20°N) the spring onset of elevated CH4 emissions starts 3 d earlier, and the CH4 emission season lasts 4 d longer, for each degree Celsius increase in mean annual air temperature. On average, the spring onset of increasing CH4 emissions lags behind soil warming by 1 month, with very few sites experiencing increased CH4 emissions prior to the onset of soil warming. In contrast, roughly half of these sites experience the spring onset of rising CH4 emissions prior to the spring increase in gross primary productivity (GPP). The timing of peak summer CH4 emissions does not correlate with the timing for either peak summer temperature or peak GPP. Our results provide seasonality parameters for CH4 modeling and highlight seasonality metrics that cannot be predicted by temperature or GPP (i.e., seasonality of CH4 peak). FLUXNET-CH4 is a powerful new resource for diagnosing and understanding the role of terrestrial ecosystems and climate drivers in the global CH4 cycle, and future additions of sites in tropical ecosystems and site years of data collection will provide added value to this database. All seasonality parameters are available at https://doi.org/10.5281/zenodo.4672601 (Delwiche et al., 2021). Additionally, raw FLUXNET-CH4 data used to extract seasonality parameters can be downloaded from https://fluxnet.org/data/fluxnet-ch4-community-product/ (last access: 7 April 2021), and a complete list of the 79 individual site data DOIs is provided in Table 2 of this paper.

FLUXNET-CH4↗
NASA NTRS2021

Mangrove Carbon Stocks in Pongara National Park, Gabon

Mangroves are recognized for their valued ecosystem services to coastal areas, and the functional linkages between those services and ecosystem carbon stocks have been established. However, spatially explicit inventories are necessary to facilitate management and protection of mangroves, as well as providing a foundation for payment for ecosystem service programs such as REDD+. We conducted an inventory of carbon stocks in mangroves within Pongara National Park (PNP), Gabon using a stratified random sampling design based on forest canopy height derived from TanDEM-X remote sensing data. Ecosystem carbon pools, including aboveground and belowground biomass and necromass, and soil carbon to a depth of 2 m were assessed using measurements and samples from plots distributed among three canopy height classes within the park. There were two mangrove species within the inventory area in PNP, Rhizophora racemosa and R. harrisonii. R. harrisonii was predominant in the sparse, low-stature stands that dominated the west side of the park. In the east side of the park, both species occurred in tall-stature stands, with tree height often exceeding 30 m. Canopy height was an effective means to stratify the inventory area, as biomass was significantly different among the height classes. Despite those differences in aboveground biomass, the soil carbon density was not significantly different among height classes. Soils were the main component of the ecosystem carbon stock, accounting for over 84% of the total. The ecosystem carbon density ranged from 644 to 943 Mg C ha−1 among the three height classes. The ecosystem carbon stock within PNP is estimated to be 40,588 Gg C. The combination of pre-inventory information about stand conditions and their spatial distribution within the assessment area obtained from remote sensing data and a spatial decision support system were fundamental to implementing this relatively large-scale field inventory. This work exemplifies how mangrove carbon stocks can be quantified to augment national C reporting statistics, provide a baseline for projects involving monitoring, reporting and verification (i.e., MRV), and provide data on the forest composition and structure for sustainable management and conservation practices.

Carl C Trettin↗
NASA NTRSDate not supplied

Storm Chasing from Space: Detecting severe weather phenomena from satellite platforms

Severe weather is an awe-inspiring phenomenon that affects the entire globe. Lightning, hail, damaging wind and tornadoes pose threats to society and challenges to the scientific community. Severe weather is annually responsible for tens of billions of dollars in insured losses to property, infrastructure, and agriculture. Satellite platforms offer a globally uniform approach to observing weather phenomena in remote or data-sparse regions and over the oceans. Severe convection exhibits distinct signatures in spaceborne datasets that we use to analyze severe storms. We leverage these signatures create climatologies, improve prediction, and provide a method of detection around the globe where traditional ground-based data (such as ground-based radar or human-spotter reports) are inconsistent or unavailable. Satellites in low-earth, sun-synchronous, and geostationary orbit provide a consistent, global view of severe weather from which we can examine the current global distribution, frequency, and severity of severe storms and establish a baseline to assess their future trend in a changing Earth system.

Sarah D. Bang↗
NASA NTRS2021

Classifying Forest Type in the National Forest Inventory Context with Airborne Hyperspectral and Lidar Data

Forest structure and composition regulate a range of ecosystem services, including biodiversity, water and nutrient cycling, and wood volume for resource extraction. Forest type is an important metric measured in the US Forest Service Forest Inventory and Analysis (FIA) program, the national forest inventory of the USA. Forest type information can be used to quantify carbon and other forest resources within specific domains to support ecological analysis and forest management decisions, such as managing for disease and pests. In this study, we developed a methodology that uses a combination of airborne hyperspectral and lidar data to map FIA-defined forest type between sparsely sampled FIA plot data collected in interior Alaska. To determine the best classification algorithm and remote sensing data for this task, five classification algorithms were tested with six different combinations of raw hyperspectral data, hyperspectral vegetation indices, and lidar-derived canopy and topography metrics. Models were trained using forest type information from 632 FIA subplots collected in interior Alaska. Of the thirty model and input combinations tested, the random forest classification algorithm with hyperspectral vegetation indices and lidar-derived topography and canopy height metrics had the highest accuracy (78% overall accuracy). This study supports random forest as a powerful classifier for natural resource data. It also demonstrates the benefits from combining both structural (lidar) and spectral (imagery) data for forest type classification.

random forest↗
NASA NTRS2021

Discrete anisotropic radiative transfer modelling of solar-induced chlorophyll fluorescence: Structural impacts in geometrically explicit vegetation canopies

Solar-induced fluorescence (SIF) is a subtle but informative optical signal of vegetation photosynthesis. Remotely sensed SIF integrates environmental, physiological and structural changes that alter photosynthesis at leaf, plant and canopy scales. Radiative transfer models are ideally suited to investigate the complex sources of variability in the SIF signal to guide the interpretation of SIF retrievals from airborne and space-borne platforms. Here, we coupled the Fluspect-Cx model of leaf optical properties and chlorophyll-a fluorescence with the Discrete Anisotropic Radiative Transfer (DART) model to upscale SIF from individual leaves to three-dimensional (3D) structurally explicit canopies. For one-dimensional homogeneous (turbid-like) canopies, DART-SIF was nearly identical to SIF simulated in two existing models, SCOPE and mSCOPE (RMSE <0.221 W./sq.m.μm.sr). DART simulations in geometrically explicit 3D canopies offered four important insights regarding the influence of vegetation structure on the multi-angular top-of-canopy SIF signal. First, changes in the 3D canopy architecture of maize crops, represented by leaf density (leaf area index), and plant clumping (canopy closure) had a larger impact on SIF than the modelled photosynthetic efficiency distinction between sun-adapted and shade-adapted foliage. Second, clumping of leaves at the crop and stand levels was identified as one of the key driving factors of multi-angular anisotropy of red and far-red SIF (686 and 740 nm) for both maize and eucalyptus canopies. Third, non-photosynthetic woody material had a significant impact on top-of-canopy SIF in modelled 3D forest stands. Wood shadowing decreased the photosynthetically active radiation absorbed by green leaves, and consequently the SIF emissions, by 10% in sparse and 17% in dense eucalyptus stands. The wood obstruction (blocking) effect, quantified as a relative difference of SIF escape probabilities from canopies with and without wood in the nadir viewing direction, decreased far-red SIF by 4–6% but it had a smaller and sometimes positive influence (by less than 2%) on red SIF. Fourth, DART 3D radiative budget profiles revealed that the majority of the SIF signal from a dense eucalyptus stand originated from the top 25% of the simulated canopy. Interestingly, the introduction of bark-covered woody elements did not alter the simulated balance and omnidirectional escape factor of red SIF in this upper canopy part but did raise significantly both of them in case of far-red SIF. These results demonstrate the importance of 3D radiative transfer and radiative budget simulations for investigating SIF interactions in structurally complex plant canopies and for a better understanding of spatiotemporal and multi-angular remote sensing SIF observations.

Zbyněk Malenovský↗
NASA NTRS2022

The Joint Assimilation of Remotely Sensed Leaf Area Index and Surface Soil Moisture into a Land Surface Model

This work tests the hypothesis that jointly assimilating satellite observations of leaf area index and surface soil moisture into a land surface model improves the estimation of land vegetation and water variables. An Ensemble Kalman Filter is used to test such hypothesis across the Contiguous United States during April 2015 – December 2018. The performance of the proposed methodology is assessed for several modeled vegetation and water variables (evapotranspiration, net ecosystem exchange, and soil moisture) in terms of random errors and anomaly correlation coefficients against a set of independent validation datasets (i.e., Global Land Evaporation Amsterdam Model, FLUXCOM, and International Soil Moisture Network). Results show that the assimilation of leaf area index mostly improves the estimation of evapotranspiration and net ecosystem exchange, whereas the assimilation of surface soil moisture alone improves surface soil moisture content, especially in the western US, in terms of both root mean squared error and anomaly correlation coefficient. The joint assimilation of vegetation and soil moisture information combines the results of individual vegetation and soil moisture assimilations and reduces errors (and increases correlations with the reference datasets) in evapotranspiration, net ecosystem exchange, and surface soil moisture simulated by the land surface model. However, because soil moisture satellite observations only provide information on the water content in the top 5 cm of the soil column, the impact of the proposed data assimilation technique on root zone soil moisture is limited. This work moves one step forward in the direction of improving our estimation and understanding of land surface interactions using a multi-variate data assimilation approach, which can be particularly useful in regions of the world where ground observations are sparse or missing altogether.

Data assimilation↗
NASA NTRS2020

Mapping tree canopy cover and canopy height with L-band SAR using LiDAR data and Random Forests

Light detection and ranging (LiDAR) data can provide direct measurements of vegetation structures but are limited by the sparse spatial coverage. Polarimetric synthetic aperture radar (SAR) can perform large-scale high-resolution mapping without weather constraints but the information about vegetation and ground subsurface are mixed in the backscatter data. In this paper, we adopted the Random Forests algorithm to train an upscaling function using tree canopy cover (TCC) and canopy height model (CHM) derived from Goddard’s LiDAR, Hyperspectral and Thermal Imager (G-LiHT) data. The regression model is then applied to the L-band Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) data acquired during the 2017 Arctic-Boreal Vulnerability Experiment (ABoVE) airborne campaign to map the TCC and CHM over the Delta Junction area in interior Alaska.

Moghaddam, Mahta↗
NASA NTRS2020

CyberGAN: Generating High-fidelity Cybersecurity Data With Generative Adversarial Networks

Machine learning for cyber defense offers the promise of detecting adversarial activity against the ground data systems managing critical space assets. A fundamental challenge facing machine learning research in cybersecurity is the lack of high-fidelity, shareable datasets for robust evaluation and testing of machine learning-based solutions. High-fidelity, real-world datasets are necessary for reliable benchmarking of nominal system behavior and malicious activity. Unfortunately, such realistic datasets of both nominal and adversarial activity are rarely shared publicly by data owners due to security and privacy concerns. Besides, the available adversarial data is sparse, which makes training models on malicious activity much harder. This situation has impeded and continues to impede the research and successful adoption of machine learning methods for cyber defense. Researchers have dealt with this problem by generating data within a low-fidelity lab environment, using classified and thus unshareable datasets, or downloading low-fidelity public datasets made available by others. We propose an innovative solution to the problem by employing machine learning methods to generate high-fidelity data. Specifically, we propose the use of Generative Adversarial Networks (GANs) to generate high-fidelity data for cybersecurity purposes. GANs have found successful image processing and natural language applications, but have not yet been investigated for cyber data generation. Our proposed approach first involves training the `discriminator' network of the GAN with a sample of real-world data consisting of malicious and nominal samples. We then use the `generator' network to generate new high-fidelity data samples consisting of an appropriate mix of malicious and nominal activity. We demonstrate applications of our architecture by generating high-fidelity cybersecurity data containing both malicious and nominal samples. We thoroughly evaluate the fidelity of our generated data using heuristics and evaluate its usefulness for machine learning applications using three different datasets. Overall, our approach results in high-fidelity, shareable datasets.

Zhang, Yuening↗