Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “source selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

ULTRAVIOLET LUMINOSITY FUNCTIONS FROM 132 z {approx} 7 AND z {approx} 8 LYMAN-BREAK GALAXIES IN THE ULTRA-DEEP HUDF09 AND WIDE-AREA EARLY RELEASE SCIENCE WFC3/IR OBSERVATIONS

We identify 73 z {approx} 7 and 59 z {approx} 8 candidate galaxies in the reionization epoch, and use this large 26-29.4 AB mag sample of galaxies to derive very deep luminosity functions to < - 18 AB mag and the star formation rate (SFR) density at z {approx} 7 and z {approx} 8 (just 800 Myr and 650 Myr after recombination, respectively). The galaxy sample is derived using a sophisticated Lyman-break technique on the full two-year Wide Field Camera 3/infrared (WFC3/IR) and Advanced Camera for Surveys (ACS) data available over the HUDF09 ({approx}29.4 AB mag, 5{sigma}), two nearby HUDF09 fields ({approx}29 AB mag, 5{sigma}, 14 arcmin{sup 2}), and the wider area Early Release Science ({approx}27.5 AB mag, 5{sigma}, {approx}40 arcmin{sup 2}). The application of strict optical non-detection criteria ensures the contamination fraction is kept low (just {approx}7% in the HUDF). This very low value includes a full assessment of the contamination from lower redshift sources, photometric scatter, active galactic nuclei, spurious sources, low-mass stars, and transients (e.g., supernovae). From careful modeling of the selection volumes for each of our search fields, we derive luminosity functions for galaxies at z {approx} 7 and z {approx} 8 to < - 18 AB mag. The faint-end slopes {alpha} at z {approx} 7 and z {approx} 8 are uncertain but very steep at {alpha} = -2.01 {+-} 0.21 and {alpha} = -1.91 {+-} 0.32, respectively. Such steep slopes contrast to the local {alpha} {approx}> -1.4 and may even be steeper than that at z {approx} 4 where {alpha} = -1.73 {+-} 0.05. With such steep slopes ({alpha} {approx}< -1.7) lower luminosity galaxies dominate the galaxy luminosity density during the epoch of reionization. The SFR densities derived from these new z {approx} 7 and z {approx} 8 luminosity functions are consistent with the trends found at later times (lower redshifts). We find reasonable consistency with the SFR densities implied from reported stellar mass densities being only {approx}40% higher at z < 7. This suggests that (1) the stellar mass densities inferred from the Spitzer Infrared Array Camera (IRAC) photometry are reasonably accurate and (2) that the initial mass function at very high redshift may not be very different from that at later times.

79 ASTRONOMY AND ASTROPHYSICS↗

AVERAGE HEATING RATE OF HOT ATMOSPHERES IN DISTANT CLUSTERS BY RADIO ACTIVE GALACTIC NUCLEUS: EVIDENCE FOR CONTINUOUS ACTIVE GALACTIC NUCLEUS HEATING

We examine atmospheric heating by radio active galactic nuclei (AGNs) in distant X-ray clusters by cross correlating clusters selected from the 400 Square Degree (400SD) X-ray Cluster survey with radio sources in the NRAO VLA Sky Survey. Roughly 30% of the clusters show radio emission above a flux threshold of 3 mJy within a projected radius of 250 kpc. The radio emission is presumably associated with the brightest cluster galaxy. The mechanical jet power for each radio source was determined using scaling relations between radio power and cavity (mechanical) power determined for nearby clusters, groups, and galaxies with hot atmospheres containing X-ray cavities. The average jet power of central radio AGNs is approximately 2 x 10{sup 44} erg s{sup -1}. We find no significant correlation between radio power, and hence mechanical jet power, and the X-ray luminosities of clusters in the redshift range 0.1-0.6. This implies that the mechanical heating rate per particle is higher in lower mass, lower X-ray luminosity clusters. The jet power averaged over the sample corresponds to an atmospheric heating of approximately 0.2 keV per particle within R{sub 500}. Assuming the current AGN heating rate does not evolve but remains constant to redshifts of 2, the heating rate per particle would rise by a factor of two. We find that the energy injected from radio AGNs contribute substantially to the excess entropy in hot atmospheres needed to break self-similarity in cluster scaling relations. The detection frequency of radio AGNs is inconsistent with the presence of strong cooling flows in 400SD clusters, but does not exclude weak cooling flows. It is unclear whether central AGNs in 400SD clusters are maintained by feedback at the base of a cooling flow. Atmospheric heating by radio AGNs may retard the development of strong cooling flows at early epochs.

79 ASTRONOMY AND ASTROPHYSICS↗

The Gemini NICI planet-finding campaign: The companion detection pipeline

We present high-contrast image processing techniques used by the Gemini NICI Planet-Finding Campaign to detect faint companions to bright stars. The Near-Infrared Coronographic Imager (NICI) is an adaptive optics instrument installed on the 8 m Gemini South telescope, capable of angular and spectral difference imaging and specifically designed to image exoplanets. The Campaign data pipeline achieves median contrasts of 12.6 mag at 0.''5 and 14.4 mag at 1'' separation, for a sample of 45 stars (V = 4.3-13.9 mag) from the early phase of the campaign. We also present a novel approach to calculating contrast curves for companion detection based on 95% completeness in the recovery of artificial companions injected into the raw data, while accounting for the false-positive rate. We use this technique to select the image processing algorithms that are more successful at recovering faint simulated point sources. We compare our pipeline to the performance of the Locally Optimized Combination of Images (LOCI) algorithm for NICI data and do not find significant improvement with LOCI.

79 ASTRONOMY AND ASTROPHYSICS↗

Monte Carlo simulations of time-of-flight PET with double-ended readout: calibration, coincidence resolving times and statistical lower bounds

Here, this paper demonstrates through Monte Carlo simulations that a practical positron emission tomograph with (1) deep scintillators for efficient detection, (2) double-ended readout for depth-of-interaction information, (3) fixed-level analog triggering, and (4) accurate calibration and timing data corrections can achieve a coincidence resolving time (CRT) that is not far above the statistical lower bound. One Monte Carlo algorithm simulates a calibration procedure that uses data from a positron point source. Annihilation events with an interaction near the entrance surface of one scintillator are selected, and data from the two photodetectors on the other scintillator provide depth-dependent timing corrections. Another Monte Carlo algorithm simulates normal operation using these corrections and determines the CRT. A third Monte Carlo algorithm determines the CRT statistical lower bound by generating a series of random interaction depths, and for each interaction a set of random photoelectron times for each of the two photodetectors. The most likely interaction times are determined by shifting the depth-dependent probability density function to maximize the joint likelihood for all the photoelectron times in each set. Example calculations are tabulated for different numbers of photoelectrons and photodetector time jitters for three 3 × 3 × 30 mm 3 scintillators: Lu 2 SiO 5 :Ce,Ca (LSO), LaBr 3 :Ce, and a hypothetical ultra-fast scintillator. To isolate the factors that depend on the scintillator length and the ability to estimate the DOI, CRT values are tabulated for perfect scintillator-photodetectors. For LSO with 4000 photoelectrons and single photoelectron time jitter of the photodetector J = 0.2 ns (FWHM), the CRT value using the statistically weighted average of corrected trigger times is 0.098 ns FWHM and the statistical lower bound is 0.091 ns FWHM. For LaBr 3 :Ce with 8000 photoelectrons and J = 0.2 ns FWHM, the CRT values are 0.070 and 0.063 ns FWHM, respectively. For the ultra-fast scintillator with 1 ns decay time, 4000 photoelectrons, and J = 0.2 ns FWHM, the CRT values are 0.021 and 0.017 ns FWHM, respectively. Lastly, the examples also show that calibration and correction for depth-dependent variations in pulse height and in annihilation and optical photon transit times are necessary to achieve these CRT values.

60 APPLIED LIFE SCIENCES↗

Using cyclotron radiation emission for ultra-high resolution x-ray spectroscopy

Abstract Cyclotron radiation emission spectroscopy (CRES) is an approach to measuring the energy of an electron trapped in an externally applied magnetic field. The bare electron can come from different interactions, including photoelectric absorption, Compton scatters, beta decay, and pair production. CRES relies on measuring the frequency of the electron’s cyclotron motion, and because the measurement times extend over 10 6 –10 7 cycles, the energy resolution is on the order of a single electronvolt. To date, CRES has only been performed on internal beta-emitting radioisotopes, but the technology can be applied to x-ray spectrometery through appropriate selection of a target gas and sufficient intensity of the distinct x-ray source. The applications of this technology range from high-precision measurements of atomic energy levels to calibrations of basic science experiments, to trace element identification. In this work we explore the use of CRES for x-ray spectroscopy within the rubric of measuring the energy levels of argon. Though the energy levels of argon are well established, we adopt this motivation as an example question around which a detector may be designed. The issues we explore include target material, density, electron trapping depth, noise levels, and overall efficiency. We also discuss spectral deconvolution and how the multiple peaks obtained from a single target/source pair can be used to enhance the robustness of the measurement.

07 ISOTOPE AND RADIATION SOURCES↗

EC-Bench: A Benchmark for Enzyme Commission Number Prediction

Enzymes are proteins that catalyze specific biochemical reactions in cells. Enzyme Commission (EC) numbers are used to annotate enzymes in a four-level hierarchy that classifies enzymes based on the specific chemical reactions they catalyze. Accurate EC number prediction is essential for understanding enzyme functions. Despite the availability of numerous methods for predicting EC numbers from protein sequences, there is no unified framework for evaluating and studying such methods systematically. This gap limits the ability of the community to identify the most effective approaches for enzyme annotation. We introduce EC-Bench, a benchmark for EC number prediction, consisting of 1) an initial representative set of existing methods (including homology-based, deep learning, contrastive learning, and language model methods), 2) existing and novel accuracy and efficiency performance metrics, and 3) selected datasets to allow for comprehensive comparative study. EC-Bench is open-source and provides a framework for researchers to not only compare among existing methods objectively under uniform conditions, but also to introduce and effectively evaluate performance of new methods in a comparative framework. To demonstrate the utility of EC-Bench, we perform extensive experimentation to compare the existing EC number prediction methods and establish their advantages and disadvantages in a variety of prediction tasks, namely “exact EC number prediction”, “EC number completion” and (partial or additional) “EC number recommendation”. We find wide variation in the performance of different methods, but also subtle but potentially useful differences in the performance of different methods across tasks and for different parts of the EC hierarchy.

59 BASIC BIOLOGICAL SCIENCES↗

The completed SDSS-IV extended Baryon Oscillation Spectroscopic Survey: measurement of the growth rate of structure from the small-scale clustering of the luminous red galaxy sample

ABSTRACT We measure the small-scale clustering of the Data Release 16 extended Baryon Oscillation Spectroscopic Survey Luminous Red Galaxy sample, corrected for fibre-collisions using Pairwise Inverse Probability weights, which give unbiased clustering measurements on all scales. We fit to the monopole and quadrupole moments and to the projected correlation function over the separation range $7-60\, h^{-1}{\rm Mpc}$ with a model based on the aemulus cosmological emulator to measure the growth rate of cosmic structure, parametrized by fσ8. We obtain a measurement of fσ8(z = 0.737) = 0.408 ± 0.038, which is 1.4σ lower than the value expected from 2018 Planck data for a flat ΛCDM model, and is more consistent with recent weak-lensing measurements. The level of precision achieved is 1.7 times better than more standard measurements made using only the large-scale modes of the same sample. We also fit to the data using the full range of scales $0.1\text{--}60\, h^{-1}{\rm Mpc}$ modelled by the aemulus cosmological emulator and find a 4.5σ tension in the amplitude of the halo velocity field with the Planck + ΛCDM model, driven by a mismatch on the non-linear scales. This may not be cosmological in origin, and could be due to a breakdown in the Halo Occupation Distribution model used in the emulator. Finally, we perform a robust analysis of possible sources of systematics, including the effects of redshift uncertainty and incompleteness due to target selection that were not included in previous analyses fitting to clustering measurements on small scales.

79 ASTRONOMY AND ASTROPHYSICS↗

Collision geometry and flow in uranium + uranium collisions

Using event-by-event viscous fluid dynamics to evolve fluctuating initial density profiles from the Monte Carlo–Glauber model for U+U collisions, we study the predicted “knee”-like structure in the elliptic flow as a function of collision centrality. The knee arises in the two-component Monte Carlo–Glauber model when the initial source ellipticity is plotted as a function of centrality. It results from the preferential selection of tip-on-tip collision geometries by a high-multiplicity trigger. We find that the knee survives hydrodynamic evolution, and that it is located around the 0.5% most central collisions as measured by the final charged multiplicity. Such a knee structure is not seen in the STAR data. This rules out the two-component MC-Glauber model for initial energy and entropy production. Thus, an enrichment of tip-tip configurations by triggering solely on high-multiplicity in the U+U collisions does not work. Yet, by using zero degree calorimeters (ZDCs) coupled with event-shape engineering such a selection is possible. We identify the selection purity of body-body and tip-tip events in full-overlap U+U collisions. By additionally constraining the asymmetry of the ZDC signals we can further increase the probability of selecting tip-tip events in U+U collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Domain-Adapted Convolutional Networks for Satellite Image Classification: A Large-Scale Interactive Learning Workflow

Satellite imagery often exhibits large spatial extent areas that encompass object classes with considerable variability. This often limits large-scale model generalization with machine learning algorithms. Notably, acquisition conditions, including dates, sensor position, lighting condition, and sensor types, often translate into class distribution shifts introducing complex nonlinear factors and hamper the potential impact of machine learning classifiers. Here, this article investigates the challenge of exploiting satellite images using convolutional neural networks (CNN) for settlement classification where the class distribution shifts are significant. We present a large-scale human settlement mapping workflow based-off multiple modules to adapt a pretrained CNN to address the negative impact of distribution shift on classification performance. To extend a locally trained classifier onto large spatial extents areas we introduce several submodules: First, a human-in-the-loop element for relabeling of misclassified target domain samples to generate representative examples for model adaptation; second, an efficient hashing module to minimize redundancy and noisy samples from the mass-selected examples; and third, a novel relevance ranking module to minimize the dominance of source example on the target domain. The workflow presents a novel and practical approach to achieve large-scale domain adaptation with binary classifiers that are based-off CNN features. Experimental evaluations are conducted on areas of interest that encompass various image characteristics, including multisensors, multitemporal, and multiangular conditions. Domain adaptation is assessed on source–target pairs through the transfer loss and transfer ratio metrics to illustrate the utility of the workflow.

47 OTHER INSTRUMENTATION↗

Application of the diagnostic radiological index of protection to protective garments

Purpose: Previously, the diagnostic radiological index of protection (DRIP) was proposed as a metric for quantifying the protective value of radioprotective garments. The DRIP is a weighted sum of the percent transmissions of different radiation beams through a garment. Ideally, the beams would represent the anticipated stray radiation encountered during clinical use. However, it is impractical to expect a medical physicist to possess the equipment necessary to accurately measure transmission of scattered radiation. Therefore, as a proof of concept, the authors tested a method that applied the DRIP to clinical practice. Methods: Primary beam qualities used in interventional cardiology and radiology were observed and catalogued. Based on the observed range of beam qualities, five representative clinical primary beam qualities, specified by kV and added filtration, were selected for this evaluation. Monte Carlo simulations were performed using these primary beams as source definitions to generate scattered spectra from the clinical primary beams. Using numerical optimization, ideal scatter mimicking primary beams, specified by kV and added aluminum filtration, were matched to the scattered spectra according to half- and quarter-value layers and spectral shape. To within reasonable approximation, these theoretical scatter-mimicking primary beams were reproduced experimentally in laboratory x ray beams and used to measure transmission through pure lead and protective garments. For this proof of concept, the DRIP for pure lead and the garments was calculated by assigning equal weighting to percent transmission measurements for each of the five beams. Finally, the areal density of lead and garments was measured for consideration alongside the DRIP to assess the protective value of each material for a given weight. Results: The authors identified ideal scatter mimicking primary beams that matched scattered spectra to within 0.01 mm for half- and quarter-value layers in copper and within 5% for the shape function. The corresponding experimental scatter-mimicking primary beams matched the Monte Carlo generated scattered spectra with maximum deviations of 6.8% and 6.6% for half- and quarter-value layers. The measured DRIP for 0.50 mm lead sheet was 2.0, indicating that it transmitted, on average, 2% of incident radiation. The measured DRIP for a lead garment and one lead-alternative garment closely matched that for pure lead of 0.50 mm thickness. The DRIP for other garments was substantially higher than 0.50 mm lead (3.9–5.4), indicating they transmitted about twice as much radiation. When the DRIP was plotted versus areal density, it was clear that, of the garments tested, none were better than lead on a weight-by-weight basis. Conclusions: A method for measuring the DRIP for protective garments using scatter-mimicking primary beams was developed. There was little discernable advantage in protective value per unit weight for lead-alternative versus lead-only garments. Careful consideration must be given to the balance of protection and weight when choosing a lead-alternative protective garment with a lower specified “lead equivalence,” e.g., 0.35 mm. The DRIP has the potential to resolve this dilemma. Reporting the DRIP relative to areal density is an ideal metric for objective comparisons of protective garment performance, considering both protective value in terms of transmission of radiation and garment weight.

60 APPLIED LIFE SCIENCES↗

DCIF (Directional Cooling-Induced Fracturing) Westerly Granite AE Borehole Damage Effect Test (Task 3-0)

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on three rectangular Westerly granite blocks (width=depth=4.0", height=2.0") which were preheated to 200, 400, and 600 degree C to induce damage (microcracks) with varying degrees. Liquid nitrogen was poured in a small, 1"-diameter copper cup attached to the top of the sample, and the resulting acoustic emissions (AEs) and temperature changes on the surface of the sample were monitored. The experiments were conducted under one selected biaxial stress (5.8MPa). The obtained AEs were used to determine the microcracking source locations and amplitude, and the associated moment tensors. The onset time of the AEs was correlated with the cooling temperature, which was used to show that the temperature at the onset of microcracking is not affected significantly by the preexisting damage, compared to the impact of the stress in the sample. Included in this submission are the animations of the AE locations and graphics displaying the measured temperature-AE activity changes for samples with different degrees of microcrack damage.

15 GEOTHERMAL ENERGY↗

Co-Development of Oscillating Water Column (OWC) and Offshore Power Station

The project proposed an Oscillating Water Column (OWC) at a low power rating (1-5kW); to build a prototype and perform field testing within 1–3 years and achieving a commercial version of the OWC 3–5 years. We selected the OWC off-the-shelf components to secure the supply-chain sources and to warrant stable and minimum pricing. We want to curtail the capital cost by reducing the weight and volume of the overall system structure at the design level by designing a high-speed turbine generator and optimizing the airspeed amplification. We want to minimize the operational and maintenance (O&M) costs through simplified architecture, minimal parts, modular/plug-and-play, and easy access designs.

16 TIDAL AND WAVE POWER↗

SoK: A Framework for and Analysis of Software Bill of Materials Tools

Modern software development has gradually become more complex, leveraging available open-source software and third party components. This practice has raised questions about the provenance, licensing, versioning and compliance of reused code and its dependencies. Furthermore, it is par ticularly important to review such code fragments and third party components for known-vulnerabilities before they are included in a software product. A Software Bill of Materials (SBoM) is a mechanism to achieve such an analysis, provid ing transparency and visibility into a software product to both the software developer and its respective consumer. An SBoM lists information and details about all the elements constituting a piece of software and can, therefore, be used to evaluate associated security risk. While the concept of SBoMs is growing in popularity, it is still fairly new to many organizations, causing them to potentially struggle with pro ducing and processing SBoMs and limiting their widespread adoption. In this work, we delve into the area of SBoMs and present the state-of-the-art SBoM tools, creating a framework for analysis and categorizing them based on a diverse set of features and functionalities. We are the first to provide a detailed analysis of 83 open-source SBoM tools along with a perspective on how a potential SBoM user can select a tool based on their specific requirements. Our work aims to help promote understanding of this domain, thereby encouraging and furthering its overall adoption. We additionally seek to pave a path for future work in this area by providing recommendations to tool developers and users, researchers, and standardizing organizations.

99 GENERAL AND MISCELLANEOUS↗

Understanding the Structure of Pd/ZnO Methanol Steaming Reforming Catalysts for Hydrogen Production

Alcohols, due to their easy storage and transport, have been proposed as possible sources of hydrogen. To convert alcohols to hydrogen via onboard reforming requires highly active, selective and stable catalysts. Pd supported on ZnO has shown promising properties as a catalyst for onboard steam reforming of methanol to produce hydrogen [1]. The formation of PdZn alloy nanoparticles has been considered to be responsible for the improved catalytic performance of Pd/ZnO catalysts [1]. The alloy formation processes and detailed surface atomic structures of the PdZn nanoparticles, however, are not well understood [2-3]. We have recently developed a unique model nanocatalyst by preparing precursor materials consisting of Pd dispersed onto well-defined surfaces of ZnO nanobelts. In situ study of the reduction processes of the Pd/ZnO precursor materials, using an electron microscope with sub- ngstr m image resolution, has provided deep insights into the PdZn alloy formation processes, their structural evolution and the nature of the final Pd/ZnO catalysts.

aberration-corrected↗

Vanadium metal-organic framework for selective adsorption

A permanently porous vanadium(II)-containing metal-organic framework (MOF) with vanadium(II) centers and methods for synthesis of such MOF frameworks are provided. Methods for using such compounds to selectively react with N2 over CH4 are provided. In the synthetic methods, a vanadium source, such as VY2(tmeda)2, where Y is a halogen and tmeda is N,N,N′,N′-tetramethylethane-1,2-diamine and a H2(ligand) are reacted in the presence of acid in a solvent at between 110° C. and 130° C. to form an intermediate product. The intermediate product is collected and washed with a washing agent, such as DMF and acetonitrile, and the vanadium(II) based MOF is activated by heating the washed intermediate product to at least 160° C. under dynamic vacuum.

Long, Jeffrey R.↗

Integrated Methodology for the Impact Assessment of an Uranium Mill Contaminated Site - 19031

This work describes the development of mathematical models for radionuclides distribution and transport in the environment. The applicability of the models involves an integrated approach to assess the quantitative dispersion of the radionuclides in different environmental compartments when released from uranium tailings or from other low-activity mining wastes storages. For every compartment the important pathways of contamination and the radionuclides of major concern are identified and selected, based on their chemical, physical, radiological and toxic properties. Each compartment represents an environmental media: air, soil, water, vegetation and biota. Depending on the characteristics of the sources different types of possible releases are evaluated using phenomenological models. Models of environmental release, dispersion, transport and fate within each environmental compartment, as well as models of transfer between them, are applied to a specific site. The model outputs are the radionuclides activities for each one of the environmental compartments, where relevant exposure end-points are previously identified. The methodology was applied to a specific Uranium Mill Site, referred here as the 'Mill'. The site comprises approximately 3.2 km and includes two inactive mills, former ore stockpiles areas, a partially reclaimed tailings pond disposal area and a current tailings pond disposal area. The Mill site began operations in the late 1950's extracting uranium ore by alkaline leaching. Later on, a new facility using acid leaching for extracting uranium begun to operate in 1980. The mill operated first continuously and after intermittently until its closure, in March 2006. The data required for the model input was acquired from different sources: direct measurements from this particular site and available from multiple site investigation reports (in particular, environmental data for groundwater, soil, surface water, sediments and biota); other, were selected from published data. For the unknown data, assumptions were made. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Simplified Approach for Scoping Assessment of Non-LWR Source Terms

This report describes a structure to aid in evaluation of release mitigation strategies across a range of reactor technologies. The assessment performed for example reactor concepts utilizes previous studies of postulated accident sequences for each reactor concept. This simplified approach classifies release mitigation strategies based on a range of barriers, physical attenuation processes, and system performance. It is not, however, intended to develop quantitative estimates of radiological release magnitudes and compositions to the environment. Rather, this approach is intended to identify the characteristics of a reactor design concepts release mitigation strategies that are most important to different classes of accident scenarios. It uses a scoping methodology to provide an approximate, order-of-magnitude, estimate of the radiological release to the environment and associated off-site consequences. This scoping method is applied to different reactor concepts, considering the performance of barriers to fission product release for these concepts under sample accident scenarios. The accident scenarios and sensitivity evaluations are selected in this report to evaluate the role of different fission product barriers in ameliorating the source term to the environment and associated off-site consequences. This report applies this structure to characterize how release mitigation measures are integrated to define overall release mitigation strategies for High Temperature Gas Reactors (HTGRs), Sodium Fast Reactors (SFRs), and liquid fueled Molten Salt Reactors (MSRs). To support this evaluation framework, factors defining a chain of release attenuation stages, and thus an overall mitigation strategy, must be established through mechanistic source term calculations. This has typically required the application of an integral plant analysis code such as MELCOR. At present, there is insufficient evidence to support a priori evaluation of the effectiveness of a release mitigation strategy for advanced reactor concepts across the spectrum of events that could challenge the radiological containment function. While it is clear that these designs have significant margin to radiological release to the environment for the scenarios comprising the design basis, detailed studies have not yet been performed to assess the risk profile for these plants. Such studies would require extensive evaluation across a reasonably complete spectrum of accident scenarios that could lead to radiological release to the environment.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

System and method for grain refinement and general control of grain morphology in laser additive manufacturing

The present disclosure relates to a system for forming a material layer that may make use of an optical light source for generating an optical beam, and a beam shaping subsystem configured to shape the optical beam to generate a complex beam intensity profile. The complex shaped beam may be used to selectively melt at least portions of a bed of powder particles residing on a substrate during formation of the material layer, as the optical light source is moved. A computer may be used to control the optical light source. The complex beam intensity profile enables control over the microstructure of grains formed during melting of the powder particles as the material layer is formed.

Roehling, Tien↗