Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “scaled testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Experimental investigation of the short-term creep recovery of hardened cement paste at micrometre length scale

This paper presents an experimental investigation on the short-term creep recovery of cement paste at micrometre length scale. Micro-cantilever beams were fabricated and tested with 8 different loading series using the nanoindenter. It is found that cement pastes show high recovery ratios (>80%) even subjected to very high stress levels. Relatively lower recovery ratios and non-linear creep were also observed for w/c 0.4 samples under high stress levels. A good agreement is found between the results predicted using the linear superposition principle and the experimental results except for the measured non-linear creep in w/c 0.4 samples. It is suggested that the short-term creep recovery may be associated with the microscale stress redistribution or the reversible internal water movement. The observed non-linear creep under the highest stress level may be due to the higher density of microcracks generated during the loading stage, which may further promote the water transfer.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A comprehensive modeling method for proton exchange membrane electrolyzer development

Hydrogen attracts significant interests as an effective energy carrier that can be derived from renewable sources. Hydrogen production using a proton-exchange membrane (PEM) electrolyzer can efficiently convert renewable power via water splitting in wide scales—from large, centralized generation to on-site production. Mathematical models with multiple scales and fidelities facilitate the continuing improvements of PEM electrolyzer development to improve performance, cost, and reliability. The model scopes and methods are presented in this paper, which also introduces a comprehensive PEM electrolysis modeling tool based on computational fluid dynamics (CFD) software, ANSYS/Fluent. The modeling tool incorporates electrochemical model of a PEM electrolysis cell to simulate the performance of coupled thermal-fluid, species transport, and electrochemical processes in a product-scale cell or stack by leveraging the powerful meshing generation and CFD solver of ANSYS/Fluent. The thermal-fluid modeling includes liquid water/gas two-phase flow and simulates a PEM electrolysis cell by using Fluent user-defined functions as add-on modules accounting for PEM-specific species transport and electrochemical processes. The modeling outcomes expediate PEM electrolyzer scaling up from basic material development and laboratory testing.

08 HYDROGEN↗
DOE OSTI2020

A pseudo-kinetic model to simulate phase changes in gas hydrate bearing sediments

Herein, modeling of the phase transitions anticipated in gas hydrate bearing sediments (GHBS) is critical for a proper understanding of time-dependent changes in states and volumes (e.g. the production of methane from this type of soils). We propose a new pseudo-kinetic approach to simulate the typical phase changes anticipated in GHBS, using published experimental results involving gas hydrate dissociation that are the basis of a widely used kinetic model. The proposed pseudo-kinetic model is formulated in the pressure-temperature (P-T) plane and assumes a rate of gas hydrate dissociation (or formation) proportional to the distance between the current state and the phase boundary. The model consists of only one parameter and is simple to implement in numerical simulators. A similar concept is used to model ice formation/thawing phenomena, but based on the ice/liquid-water phase boundary. We implemented the pseudo-kinetic model in a fully coupled thermo-hydro-chemo-mechanical (THCM) finite element code and validated it against experimental results performed on the dissociation of synthetic gas hydrate. We also evaluated the pseudo-kinetic model using synthetic cases covering several scenarios associated with gas hydrate formation/dissociation and ice formation/thawing. The model successfully reproduced the gas production test from a natural GHBS core from Korea (scaled gas venting experiment over 14 h), and also the formation of gas hydrate and ice in permafrost in Alaska (over 2 × 10 6 years). -The analyses show the versatility of the proposed pseudo-kinetic approach by applying it to model the different types of phase transitions typically encounter in GHBS. The simple formulation, easy implementation in numerical simulator, and reduced number of parameters (only one per phase change) make this model an attractive option for simulating phase transformations in problems involving GHBS.

58 GEOSCIENCES↗
DOE OSTI2025

Proton Exchange Membrane (PEM) Water Electrolysis: Cell-Level Considerations for Gigawatt-Scale Deployment

Hydrogen produced with no greenhouse gas emissions is termed “green hydrogen” and will be essential to reaching decarbonization targets set forth by nearly every country as per the Paris Agreement. Proton exchange membrane water electrolyzers (PEMWEs) are expected to contribute substantially to the green hydrogen market. However, PEMWE market penetration is insignificant, accounting for less than a gigawatt of global capacity. Achieving substantive decarbonization via green hydrogen will require PEMWEs to reach capacities of hundreds of gigawatts by 2030. This paper serves as an overarching roadmap for cell-level improvements necessary for gigawatt-scale PEMWE deployment, with insights from three well-established hydrogen technology companies included. Analyses will be presented for economies of scale, renewable energy prices, government policies, accelerated stress tests, and component-specific improvements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Simplified Green-Ampt Model, Imbibition-Based Estimates of Permeability, and Implications for Leak-off in Hydraulic Fracturing

Predicting water imbibition into porous materials is important in a wide variety of fields, and hydraulic fracturing of low permeability hydrocarbon reservoirs has emerged as an application that is imposing a large water footprint. Furthermore, reliable predictions of imbibition are needed to better manage water use, yet are challenging because of uncertainties in both the permeability and capillary pressure driving force. Here, this uncertainty is reduced through evaluating correlations between the permeability and the effective capillary pressure associated with the wetting front, P c,f . These correlations allow elimination of P c,f from the Green and Ampt equation and concentrate all uncertainties in fluxes on the effective permeability k . Over a wide range of k and porosities n , imbibition scales approximately with k 1/3 . Although Leverett k 1/4 scaling for predicting P c,f is shown to be inferior when tested with data spanning a wide range of n , it nevertheless predicted imbibition fairly well. From simple imbibition measurements, both the empirical and Leverett scaling approaches allow estimates of k that have root-mean-square deviations of about one order of magnitude relative to measurements that ranged over 10 orders of magnitude in k .

58 GEOSCIENCES↗
DOE OSTI2023

Does Magnetic Reconnection Occur in the Near Lunar Surface Environment?

The near lunar surface contains small-scale magnetic field structures that provide a natural test bed for observing plasmas with a non-zero Hall electric field, as well as potentially facilitating electron-only reconnection. This study presents observational evidence of magnetized electrons as well as demagnetized ions when THEMIS-ARTEMIS probe B reached an altitude of ~15 km above the lunar surface. Additionally, observations suggest the presence of a field line topology change and traversal of a closed magnetic field structure containing solar wind electrons, suggestive of magnetic reconnection having occurred at some point between the solar wind interplanetary magnetic field and a lunar crustal magnetic field. Thus, the observations presented here are consistent with previous studies that predict prominent Hall electric fields near lunar crustal magnetic fields and further suggest that the solar wind interplanetary magnetic field may reconnect with lunar crustal magnetic fields, most likely via electron-only reconnection.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Hole-transport layer-dependent degradation mechanisms in perovskite solar modules

It is imperative to understand how the design of perovskite solar modules (PSMs) affects their degradation mechanisms and byproducts under environmental stressors to enable their long-term reliability. This work reports on the impact of the hole-transport layer (HTL) on thermal cyclability and degradation mechanisms of p–i–n PSMs by comparing 3 HTLs: NiO x , MeO-2PACz (a self-assembled monolayer), and a bilayer HTL of MeO-2PACz on NiO x . We observe surprising thermal cyclability from a performance standpoint despite generating clear degradation products. We find that without a fully dense HTL, seemingly insignificant moisture/oxygen ingress through the edge of the PSMs can lead to rapid destabilization of the metal halide perovskite (MHP) layer due to reactions between MHP degradation byproducts and the indium-tin oxide layer. We also show that illumination-induced cation phase segregation is dependent on the illumination of an inactive area (regions of the substrate uncovered by the rear electrode). As such, we find that a dense interface between the MHP and ITO is necessary for chemically robust PSMs and highlight criteria for testing field-relevant configurations in lab-scale architectures.

14 SOLAR ENERGY↗
DOE OSTI2022

A finite-volume scheme for modeling compressible magnetohydrodynamic flows at low Mach numbers in stellar interiors

Fully compressible magnetohydrodynamic (MHD) simulations are a fundamental tool for investigating the role of dynamo amplification in the generation of magnetic fields in deep convective layers of stars. The flows that arise in such environments are characterized by low (sonic) Mach numbers ($\mathscr{M}$ son ≲ 10 –2 ). In these regimes, conventional MHD codes typically show excessive dissipation and tend to be inefficient as the Courant–Friedrichs–Lewy (CFL) constraint on the time step becomes too strict. In this work we present a new method for efficiently simulating MHD flows at low Mach numbers in a space-dependent gravitational potential while still retaining all effects of compressibility. The proposed scheme is implemented in the finite-volume SEVEN-LEAGUE HYDRO (SLH) code, and it makes use of a low-Mach version of the five-wave Harten–Lax–van Leer discontinuities (HLLD) solver to reduce numerical dissipation, an implicit–explicit time discretization technique based on Strang splitting to overcome the overly strict CFL constraint, and a well-balancing method that dramatically reduces the magnitude of spatial discretization errors in strongly stratified setups. The solenoidal constraint on the magnetic field is enforced by using a constrained transport method on a staggered grid. We carry out five verification tests, including the simulation of a small-scale dynamo in a star-like environment at $\mathscr{M}$ son ~ 10 –3 . We demonstrate that the proposed scheme can be used to accurately simulate compressible MHD flows in regimes of low Mach numbers and strongly stratified setups even with moderately coarse grids.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Effect of relative humidity on the nonlinear elastic response of granular media

We study the influence of relative humidity (RH) on the nonlinear elastic response of granular media. Previous work has shown that the nonlinear elastic response of consolidated granular media like rocks likely arises from two distinct mechanisms; however, we do not have a clear understanding of their physical origins at the microscopic scale. Here, we conduct dynamic acousto-elastic testing (DAET) on samples of glass beads under dry (~10%), ambient (~60%), and humid (~100%) conditions at room temperature and a constant static stress of 4 MPa. DAET allows us to retrieve the full nonlinear elastic response, including transient softening and hysteretic effects. We find that the elastic nonlinearity of humid samples is an order of magnitude larger than dry samples. Moreover, we find that all extracted nonlinear parameters increase with RH. This overall increase in nonlinearity is consistent with findings from previous studies and with the hypothesis that water adsorption on the grains makes the contact junctions weaker and prone to greater disturbances when subjected to dynamic stressing. Our results also suggest that, if indeed both mechanisms coexist, they are affected in a similar fashion in these glass bead samples and cannot be distinguished by varying RH.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Evaluation of an x-ray multilayer mirror for radiography at sub-1-keV photon energies

An x-ray multilayer mirror on a spherical substrate designed for near-normal incidence with a photon energy of ~738 eV (F He α ) was procured and tested. This device is intended to be used for in-flight radiography of the shell in inertial confinement fusion experiments with cryogenic targets on the OMEGA laser at the Laboratory for Laser Energetics. Experiments in self-emission on a small (~10 J) laser system showed that the reflectivity of the mirror is high enough to record an image at laser energies as low as 0.1 J. Furthermore, a second set of tests in backlighting geometry on a larger (kJ)-scale, short-pulse laser yielded usable radiographs with laser energies as low as 40 J with a spatial resolution of ~10 μm.

47 OTHER INSTRUMENTATION↗
DOE OSTI2019

Performance-advantaged ether diesel bioblendstock production by a priori design

Lignocellulosic biomass offers a renewable carbon source which can be anaerobically digested to produce short-chain carboxylic acids. Here, we assess fuel properties of oxygenates accessible from catalytic upgrading of these acids a priori for their potential to serve as diesel bioblendstocks. Ethers derived from C 2 and C 4 carboxylic acids are identified as advantaged fuel candidates with significantly improved ignition quality (>56% cetane number increase) and reduced sooting (>86% yield sooting index reduction) when compared to commercial petrodiesel. The prescreening process informed conversion pathway selection toward a C 11 branched ether, 4-butoxyheptane, which showed promise for fuel performance and health- and safety-related attributes. A continuous, solvent-free production process was then developed using metal oxide acidic catalysts to provide improved thermal stability, water tolerance, and yields. Liter-scale production of 4-butoxyheptane enabled fuel property testing to confirm predicted fuel properties, while incorporation into petrodiesel at 20 vol % demonstrated 10% improvement in ignition quality and 20% reduction in intrinsic sooting tendency. Storage stability of the pure bioblendstock and 20 vol % blend was confirmed with a common fuel antioxidant, as was compatibility with elastomeric components within existing engine and fueling infrastructure. Technoeconomic analysis of the conversion process identified major cost drivers to guide further research and development. Life-cycle analysis determined the potential to reduce greenhouse gas emissions by 50 to 271% relative to petrodiesel, depending on treatment of coproducts.

09 BIOMASS FUELS↗
DOE OSTI2024

Drying and Analysis of Aluminum (Oxy)hydroxide Films for Dry Storage of Aluminum-Clad Spent Nuclear Fuels

In aluminum-clad spent nuclear fuels, an (oxy)hydroxide layer on the surface of the cladding hosts chemisorbed water formed during reactor and post-discharge exposure to water. Any residual water is susceptible to generating hydrogen via radiolysis, which can be a risk associated with dry fuel storage. Engineering-scale forced helium dehydration (FHD) and vacuum drying tests were conducted on mock-up fuel assemblies that included corroded aluminum surrogate plates to assess the removal of bulk and chemisorbed water. Thermogravimetric analysis was performed on samples of the surrogate plates, both undried control samples used to determine onset temperatures associated with a phase change occurring in the oxide layer and samples from drying tests used to determine the effectiveness of each drying method. Both vacuum drying and FHD processes were capable of removing bulk water. However, FHD was determined to provide additional drying capabilities, including partial removal of chemisorbed water from bayerite due to the higher temperatures during drying. In conclusion, the temperature threshold for partial dehydroxylation of the oxide layer was determined to be around 220°C, meaning any drying methods attempting to remove chemisorbed water must exceed 220°C.

chemisorbed water↗
DOE OSTI2023

New linear stability parameter to describe low-β electromagnetic microinstabilities driven by passing electrons in axisymmetric toroidal geometry

In magnetic confinement fusion devices, the ratio of the plasma pressure to the magnetic field energy, β, can become sufficiently large that electromagnetic microinstabilities become unstable, driving turbulence that distorts or reconnects the equilibrium magnetic field. In this paper, a theory is proposed for electromagnetic, electron-driven linear instabilities that have current layers localised to mode-rational surfaces and binormal wavelengths comparable to the ion gyroradius. The model retains axisymmetric toroidal geometry with arbitrary shaping, and consists of orbit-averaged equations for the mode-rational surface layer, with a ballooning space kinetic matching condition for passing electrons. The matching condition connects the current layer to the large scale electromagnetic fluctuations, and is derived in the limit that β is comparable to the square root of the electron-to-ion-mass ratio. Electromagnetic fluctuations only enter through the matching condition, allowing for the identification of an effective β that includes the effects of equilibrium flux surface shaping. The scaling predictions made by the asymptotic theory are tested with comparisons to results from linear simulations of micro-tearing and electrostatic microinstabilities in MAST discharge #6252, showing excellent agreement. In particular, it is demonstrated that the effective β can explain the dependence of the local micro-tearing mode (MTM) growth rate on the ballooning parameter θ 0 – possibly providing a route to optimise local flux surfaces for reduced MTM-driven transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

nautilus : boosting Bayesian importance nested sampling with deep learning

ABSTRACT We introduce a novel approach to boost the efficiency of the importance nested sampling (INS) technique for Bayesian posterior and evidence estimation using deep learning. Unlike rejection-based sampling methods such as vanilla nested sampling (NS) or Markov chain Monte Carlo (MCMC) algorithms, importance sampling techniques can use all likelihood evaluations for posterior and evidence estimation. However, for efficient importance sampling, one needs proposal distributions that closely mimic the posterior distributions. We show how to combine INS with deep learning via neural network regression to accomplish this task. We also introduce nautilus, a reference open-source python implementation of this technique for Bayesian posterior and evidence estimation. We compare nautilus against popular NS and MCMC packages, including emcee, dynesty, ultranest, and pocomc, on a variety of challenging synthetic problems and real-world applications in exoplanet detection, galaxy SED fitting and cosmology. In all applications, the sampling efficiency of nautilus is substantially higher than that of all other samplers, often by more than an order of magnitude. Simultaneously, nautilus delivers highly accurate results and needs fewer likelihood evaluations than all other samplers tested. We also show that nautilus has good scaling with the dimensionality of the likelihood and is easily parallelizable to many CPUs.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Dark energy survey year 3 results: Cosmological constraints from cluster abundances, weak lensing, and galaxy clustering

Galaxy clusters provide a unique probe of the late-time cosmic structure and serve as a powerful independent test of the Λ⁢CDM model. This work presents the first set of cosmological constraints derived with ∼16,000 optically selected redMaPPer clusters across nearly 5000 deg 2 using DES year 3 datasets. Our analysis leverages a consistent modeling framework for galaxy cluster cosmology and DES-Y3 joint analyses of galaxy clustering and weak lensing (3 × 2⁢pt), ensuring direct comparability with the DES-Y3 3 × 2⁢pt analysis. Here, we obtain constraints of 𝑆 8 = 0.864 ± 0.035 and Ω m = $0.26⁢5^{+0.019}_{−0.031}$ from the cluster-based data vector. We find that cluster constraints and 3 × 2⁢pt constraints are consistent under the Λ⁢CDM model with a posterior predictive distribution (PPD) value of 0.53. The consistency between clusters and 3 × 2⁢pt provides a stringent test of Λ⁢CDM across different mass and spatial scales. Jointly analyzing clusters with 3 × 2⁢pt further improves cosmological constraints, yielding 𝑆 8 = $0.81⁢1^{+0.022}_{−0.020}$ and Ω m = $0.29⁢4^{+0.022}_{−0.033}$, a 24% improvement in the Ω m − 𝑆 8 figure of merit over 3 × 2⁢pt alone. Moreover, we find no significant deviation from the Planck CMB constraints with a probability to exceed (PTE) value of 0.6, significantly reducing previous 𝑆 8 tension claims. Finally, combining DES 3 × 2⁢pt, DES clusters, and Planck CMB places an upper limit on the sum of neutrino masses of ∑𝑚 𝜈 < 0.26 eV at 95% confidence under the Λ⁢CDM model. These results establish optically selected clusters as a key cosmological probe and pave the way for cluster-based analyses in upcoming stage-IV surveys such as LSST, Euclid, and Roman.

Abbott, T. M. C. [NSF’s National Optical-Infrared ↗
DOE OSTI2021

HIPPO Software

HIPPO software is a Python implementation of the HIPPO technology. The HIPPO technology provides the computational and modeling capabilities for managing electricity market operations and for designing and prototyping future markets. The current software can solve the day-ahead unit commitment problem and perform simultaneous feasibility test. It can be used to handle industry scale electricity market.

Peng, Fan↗
DOE OSTI2024

Toward the validation of crowdsourced experiments for lightness perception

Crowdsource platforms have been used to study a range of perceptual stimuli such as the graphical perception of scatterplots and various aspects of human color perception. Given the lack of control over a crowdsourced participant’s experimental setup, there are valid concerns on the use of crowdsourcing for color studies as the perception of the stimuli is highly dependent on the stimulus presentation. Here, we propose that the error due to a crowdsourced experimental design can be effectively averaged out because the crowdsourced experiment can be accommodated by the Thurstonian model as the convolution of two normal distributions, one that is perceptual in nature and one that captures the error due to variability in stimulus presentation. Based on this, we provide a mathematical estimate for the sample size needed to produce a crowdsourced experiment with the same power as the corresponding in-person study. We tested this claim by replicating a large-scale, crowdsourced study of human lightness perception with a diverse sample with a highly controlled, in-person study with a sample taken from psychology undergraduates. Our claim was supported by the replication of the results from the latter. These findings suggest that, with sufficient sample size, color vision studies may be completed online, giving access to a larger and more representative sample. With this framework at hand, experimentalists have the validation that choosing either many online participants or few in person participants will not sacrifice the impact of their results.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Performance and flexibility improvements of Staged Pressurized Oxy-Combustion

Staged Pressurized Oxy-Combustion (SPOC) is a low-carbon coal combustion power technology being developed by Washington University in St. Louis (WUSTL). Oxy-combustion plants enable straightforward capture of carbon dioxide (CO 2 ) by removing most of the nitrogen in the combustion air prior to use, thereby burning fuel in near-pure oxygen instead of air, producing a flue gas containing primarily CO 2 and water. CO 2 capture at amounts > 90% is possible, often using cryogenic air separation. Oxy-combustion typically relies on flue gas recycle (FGR) to reduce the peak temperature and radiation that would otherwise occur in a fuel/oxygen only flame. SPOC reduces the peak temperatures of combustion by utilizing two or more pressurized boiler modules connected in series to produce fuel staging; hence, only a portion of the fuel is combusted in any given furnace module. This means that the thermal energy released at each stage can be captured and removed from the gases prior to subsequent stages, when more fuel is introduced. This allows the SPOC process to operate with minimal FGR, avoiding the associated efficiency losses and additional costs. Also, the process operates at an elevated gas-side pressure, reducing boiler size, enhancing heat transfer to achieve a compact boiler configuration as compared to an atmospheric-pressure boiler design, and allowing for recovery of the latent heat of the water from the flue gas at a temperature useful to the steam cycle. The resultant net efficiency of the system is over 3 percentage points greater than traditional atmospheric-pressure oxy-combustion, and 7 percentage points greater than the post combustion variant, representing a step-change improvement over first-generation capture technologies. To further develop the concept, WUSTL and the Electric Power Research Institute, Inc., organized a project with American Air Liquide, Inc., Doosan Babcock Limited, and the U.S. Department of Energy to investigate a practicable and workable boiler design. The team has identified the potential for enhanced process flexibility for controlling power generation over a wider load range than is normally available to conventional coal-fired power plants due to the staged nature of the heat release. With increasing intermittent renewable generator contribution, on-demand generators need to be highly flexible to participate in the future energy market, requiring extensive operation at reduced load. Conventional coal-fired steam generators typically face challenges in maintaining temperature control of the reheat steam and main steam at reduced loads. This results in inefficient operation, both in terms of the boiler efficiency and steam turbine heat rate. The results of this project show the SPOC process is capable of exceptional turndown, both on a stage basis and with the ability to bypass entire stages. Oxygen-supply flexibility was also investigated, as this is also a key consideration for the overall flexibility of the SPOC process given the operating constraints of conventional air separation units. A boiler design concept assessment was conducted and was focused on delivering compact and constructible design. The assessment checked appropriate tube operating metal temperatures at full load and at lower operating loads, balanced against the needs of efficient coal combustion, and the resultant slagging and ash environments. Combustion testing in the 100-kWth pressurized combustion test rig at WUSTL was carried out to validate the combustion, heat flux profiles and burnout at multiple loads. Combustion parameters investigated were flame stability, fuel burnout, ash composition, radiative heat flux, and temperature profiles. The results of these tests formed the basis of a full-scale boiler design that will encompass improvements in both efficiency and flexibility over conventional oxy-combustion processes. The air separation unit flexibility was investigated, and associated cost implications were addressed. Detailed economic assessment results for a 550 MWe net power block are also provided, allowing for a comparison against the baseline NETL oxy-combustion and post combustion capture cases.

20 FOSSIL-FUELED POWER PLANTS↗