SEARCH · Engineering Papers

Results for “process development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

All sources NASA NTRS DOE OSTI

NASA NTRS1983

AFTI/F-16 DFCS development summary - A report to industry multimode control law design

The primary goal of the AFTI/F-16 program is to develop a reliable triplex digital multimode flight control system; this system is to be tailored to optimize fighter performance and capable of six-degree-of-freedom decoupled aircraft control. The multiple digital control law configurations arrived at through flight testing are presented. The changes in these designs from the results of flight tests establish that flight testing is an integral part of the development process. The flight test results are analyzed here from the standpoint of pilot comments and resulting control law design modifications.

Toles, R. D.↗

NASA NTRS1982

Non-mass-analyzed ion implantation equipment for high volume solar cell production

Equipment designed for junction formation in silicon solar cells is described. The equipment, designed for a production level of approximately one megawatt per year, consists of an ion implanter and annealer. Low cost is achieved by foregoing the use of mass analysis during the implantation, and by the use of a belt furnace for annealing. Results of process development, machine design and cost analysis are presented.

Armini, A. J.↗

NASA NTRS1983

Thermoregulation in cold- and noncold-acclimated rats cold exposed in hypergravic fields

The effect of hypergravity on thermoregulation processes is investigated experimentally in rats. Hooded male Long-Evans rats were kept for 6 weeks at 5 or 23 C (cold-acclimated and noncold-acclimated groups, CA and NCA) prior to testing. One test protocol comprised sequential 1-h exposures to 23 C at 1 G, 23 C at 3 G (in a 2.1-m radius centrifuge; -Gx), 8 C at 3 G, 8 C at 1 G, and finally 23 C at 1 G, with continuous measurement of the oxygen consumption. In a second protocol, restrained rats were exposed to 23 C at 1 G, 23 C at 3 G, and 10 C at 3 G, and core temperature changes were monitored. The results are presented in graphs and a table. Oxygen consumption doubled in both CA and NCA rats on exposure to cold at 1 G, but at 3 G NCA consumption decreased while CA consumption remained high. The CA rats were also more able to maintain core temperature at 3 G than the NCA rats. These differences are attributed to the nonshivering thermogenic processes developed in CA rats, which appear to be unaffected by hypergravity.

Horowitz, J. M.↗

NASA NTRS1985

Analyzing Microchips With Dark-Field Negative Photomicrography

Inverse development process yields fine details. Photomicrographic technique produces images of integrated-circuit chips. Technique based on dark-field illumination: (chip lit with bright central spot of light and photographed by light scattered or diffracted from spot. Reveals more about microstructure patterns related to photoresist masking than more conventional bright-field method.

Suszko, S. F.↗

NASA NTRS1986

Economical Fabrication of Large Parabolic Mirrors

Long-focal-length parabolic mirrors fabricated economically by rotational casting. Technique applies to very large mirrors and incorporates new foam/fiberglass techniques ideal for producing rigid, lightweight mirrors. Process developed to produce mirrors that concentrate Sunlight for solarpumped laser.

Schneider, R. T.↗

NASA NTRS1984

Proceedings of the 24th Project Integration Meeting

Progress made by the Flat-Plate Solar Array Project is described. Reports on silicon sheet growth and characterization, silicon material, process development, high-efficiency cells, environmental isolation, engineering sciences, and reliability physics are presented along with copies of visual presentations made at the 24th Project Integration Meeting.

Tustin, D.↗

NASA NTRS1984

The future of crystalline silicon technology in the US Department of Energy program

Two basic findings were presented in the outlined report. The first is that silicon has a very high potential efficiency, demonstrated improvement in reliability and a significant potential for cost reductions. The second is that the photovoltaic technology development process is highly uncertain, but crystalline silicon technology has a substantial knowledge base to draw from, improving its chances of success. Several issues to be addressed are outlined.

Scolaro, A. F.↗

NASA NTRS1984

A methodology for collecting valid software engineering data

An effective data collection method for evaluating software development methodologies and for studying the software development process is described. The method uses goal-directed data collection to evaluate methodologies with respect to the claims made for them. Such claims are used as a basis for defining the goals of the data collection, establishing a list of questions of interest to be answered by data analysis, defining a set of data categorization schemes, and designing a data collection form. Feasibility of the data collection methodology was demonstrated by applying it to five different projects in two different environments (other NRL Reports). The application showed that the methodology was both feasible and useful.

Basili, V. R.↗

NASA NTRS1986

Process Produces Low-Secondary-Electron-Emission Surfaces

Textured carbon layer applied to copper by sputtering. Carbon surface characterized by dense, random array of needle-like spires or peaks that extend perpendicularly from local copper surface. Spires approximately 7 micrometers in height and spaced approximately 3 micrometers apart, on average. Copper substrate essentially completely covered by carbon layer, is tenacious and not damaged by vibration loadings representative of multistage depressed collector (MDC) applications. Process developed primarily to provide extremely low-secondary-electron-emission surface for copper for use as highefficiency electrodes in MDC's for microwave amplifier traveling-wave tubes (TWT's). Tubes widely used in space communications, aircraft, and terrestrial applications.

Curren, A. N.↗

NASA NTRS1983

Life prediction and constitutive behavior

One of the primary drivers that prompted the initiation of the hot section technology (HOST) program was the recognized need for improved cyclic durability of costly hot section components. All too frequently, fatigue in one form or another was directly responsible for the less than desired durability, and prospects for the future weren't going to improve unless a significant effort was mounted to increase our knowledge and understanding of the elements governing cyclic crack initiation and propagation lifetime. Certainly one of the important factors is the ability to perform accurate structural stress-strain analyses on a routine basis to determine the magnitudes of the localized stresses and strains since it is these localized conditions that govern the initiation and crack growth processes. Developing the ability to more accurately predict crack initiation lifetimes and cyclic crack growth rates for the complex loading conditions found in turbine engine hot sections is of course the ultimate goal of the life prediction research efforts. It has been found convenient to divide the research efforts into those dealing with nominally isotropic and anisotropic alloys; the latter for application to directionally solidified and single crystal turbine blades.

Halford, G. R.↗

NASA NTRS1984

The independence of software metrics taken at different life-cycle stages

Over the past few years a large number of software metrics have been proposed and, in varying degrees, a number of these metrics have been subjected to empirical validation which demonstrated the utility of the metrics in the software development process. Attempts to classify these metrics and to determine if the metrics in these different classes appear to be measuring distinct attributes of the software product are studied. Statistical analysis is used to determine the degree of relationship among the metrics.

Kafura, D.↗

NASA NTRS1984

Tailoring a software production environment for a large project

A software production environment was constructed to meet the specific goals of a particular large programming project. These goals, the specific solutions as implemented, and the experiences on a project of over 100,000 lines of source code are discussed. The base development environment for this project was an ordinary PWB Unix (tm) system. Several important aspects of the development process required support not available in the existing tool set.

Levine, D. R.↗

NASA NTRS1985

Proceedings of the 25th Project Integration Meeting

Topics addressed include: silicon sheet growth and characterization, silicon material, process development, high-efficiency cells, environmental isolation, engineering sciences, and reliability physics.

Phillips, M.↗

NASA NTRS1986

Wind tunnel test of a model rotor with a free-tip

A model helicopter rotor with a free tip was tested in a wind tunnel to show the effect of the free tip on rotor performance and oscillatory loads. The free-tip rotor has blade tips that are free to pitch independently of the remainder of the blade. A nearly constant pitching moment is applied to the tip so the tip will produce a nearly steady lift around the azimuth. The aerodynamic development of the free tip is reviewed. The development process concentrated on configuring the tip to have the capability of fast response to angle-of-attack perturbations. Wind tunnel test results show the free-tip rotor configuration requires less power than a fixed-tip configuration in forward flight. In addition, the free tip causes substantial reduction in blade-flapwise vibratory loads. However, blade-chordwise loads were increased. Pitch-link vibratory loads were also reduced by the free-tip configuration. Discussion is presented on the reasons that the use of the free tip caused reduced power and smaller vibratory loads.

Stroub, R. H.↗

NASA NTRS1986

Heatshield design for transatmospheric vehicles

A variety of future spacecraft will be operating above the sensible earth atmosphere, but will be dipping into the atmosphere to utilize aerodynamic forces in conjunction with propulsion for its major maneuvers such as plane change. During this maneuver, the vehicle surface will experience high aerodynamic heating rates. Because these heating rates can exceed those experienced by the Shuttle, advanced thermal protection systems (TPS) must be used. This paper compares the performance of four TPS concepts operating in the same heating environment. All of them can be considered as derivatives from the development process of the TPS for the Shuttle; one has a new feature added. The results show that all of the systems require about the same weight of heatshield at high heat loads. The major difference in the weight stems from the methods of attachment to the spacecraft.

Pitts, W. C.↗

NASA NTRS1987

Metal-Clad Graphite/Epoxy Tubes

Structural parts feature low weight, low thermal expansion, and high stiffness. Unique, non-labor-intensive manufacturing process developed for fabricating aluminum-clad graphite/epoxy (Gr/E) struts which meet Space Station requirements. Method of manufacturing struts provides procedure for using Gr/E material system in very efficient manner. Technique places all fibers in longitudinal direction for stiffness and strength. Aluminum surfaces provide transverse strength and resistance to atomic oxygen in environment.

Bush, Harold G.↗

NASA NTRS1985

WEST-3 wind turbine simulator development. Volume 2: Verification

The details of a study to validate WEST-3, a new time wind turbine simulator developed by Paragib Pacific Inc., are presented in this report. For the validation, the MOD-0 wind turbine was simulated on WEST-3. The simulation results were compared with those obtained from previous MOD-0 simulations, and with test data measured during MOD-0 operations. The study was successful in achieving the major objective of proving that WEST-3 yields results which can be used to support a wind turbine development process. The blade bending moments, peak and cyclic, from the WEST-3 simulation correlated reasonably well with the available MOD-0 data. The simulation was also able to predict the resonance phenomena observed during MOD-0 operations. Also presented in the report is a description and solution of a serious numerical instability problem encountered during the study. The problem was caused by the coupling of the rotor and the power train models. The results of the study indicate that some parts of the existing WEST-3 simulation model may have to be refined for future work; specifically, the aerodynamics and procedure used to couple the rotor model with the tower and the power train models.

Sridhar, S.↗

NASA NTRS1986

Proceedings of the 26th Project Integration Meeting

Progress made by the Flat-plate Solar Array (FSA) Project is described for the period July 1985 to April 1986. Included are reports on silicon sheet growth and characterization, silicon material, process development, high-efficienty cells, environmental isolation, engineering sciences, and reliability physics. Also included are technical and plenary presentations made at the 26th Project Integration Meeting (PIM) held on April 29 to 30 and May 1, 1986.

Source record↗