Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “procedures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The evaluation of a semi-automated procedure for classifying corn and soybeans without ground data

Since the launch of Landsat 1 in 1973, research has been conducted with the objective to develop technology which would make it possible to achieve large area crop estimates on the basis of Landsat Multispectral Sensor (MSS) data without the benefit of ground observed training data. The present investigation is concerned with the evaluation of a technology which was developed to produce estimates of corn and soybean acreage in the central U.S. Corn Belt (Iowa, Illinois, and Indiana). A description of the employed technique is provided and details regarding the test of the developed technology are discussed. The obtained results show that considerable progress has been made toward creating an automatic, self-adapting procedure which has favorable bias and variance characteristics.

Metzler, M. D.↗
NASA NTRS1982

Calibration procedures for measurement of reflectance factor in remote sensing field research

A means by which measurements of the optical properties of crops and soils can be knowledgeably compared from site to site and instrument to instrument is presented in detail. The definition of bidirectional reflectance factor is reviewed and discussed. Procedures for field implementation are illustrated and discussed. Spectral and goniometric properties of laboratory and field reference surfaces are given. It is concluded that intelligent use of the bidirectional reflectance factor technique is an accurate and practical means to obtain the spectral, optical properties of crops and soils needed for advancements in agricultural remote sensing.

Robinson, B. F.↗
NASA NTRS1984

A strongly implicit procedure for the compressible Navier-Stokes equations

The strongly implicit procedure of Stone is used to obtain numerical solutions of the compressible Navier-Stokes equations in conservative form. In contrast to the spatially split Douglas-Gunn type methods, the method is shown to be numerically stable for the three-dimensional wave equation. The method is applied to a variety of external and internal two-dimensional flow problems involving shock wave boundary-layer interaction for both laminar and turbulent flows. The results are in good agreement with other methods and/or experiments. The storage penalty associated with the method is discussed and a simple, yet effective, means of minimizing the problem is presented.

Walters, R. W.↗
NASA NTRS1983

Application of a viscous-inviscid interaction procedure to predict separated flows with heat transfer

A viscous-inviscid interaction procedure is described for predicting heat transfer in separated flows. The separating flow in a rearward-facing step/asymmetric channel expansion is considered. For viscous regions, the boundary-layer momentum and continuity equations are solved inversely in a coupled manner by a finite-difference numerical scheme. The streamwise convective term is altered to permit marching the solution through regions of reversed flow. The inviscid flow is computed by numerically solving the Laplace equation for stream-function in the region bounded by the displacement surfaces used in the inverse boundary-layer solution. The viscous and inviscid solutions are repeated iteratively until the edge velocities obtained from both solutions are in agreement. Predictions using this method compare favorably with experimental data and other predictions.

Hall, E. J.↗
NASA NTRS1984

A substructure coupling procedure applicable to general linear time-invariant dynamic systems

A substructure synthesis procedure applicable to structural systems containing general nonconservative terms is presented. In their final form, the non-self-adjoint substructure equations of motion are cast in state vector form through the use of a variational principle. A reduced-order model for each substructure is implemented by representing the substructure as a combination of a small number of Ritz vectors. For the method presented, the substructure Ritz vectors are identified as a truncated set of substructure eigenmodes, which are typically complex, along with a set of generalized real attachment modes. The formation of the generalized attachment modes does not require any knowledge of the substructure flexible modes; hence, only the eigenmodes used explicitly as Ritz vectors need to be extracted from the substructure eigenproblem. An example problem is presented to illustrate the method.

Howsman, T. G.↗
NASA NTRS1984

Procedures for precap visual inspection

Screening procedures for the final precap visual inspection of microcircuits used in electronic system components are described as an aid in training personnel unfamiliar with microcircuits. Processing techniques used in industry for the manufacture of monolithic and hybrid components are presented and imperfections that may be encountered during this inspection are discussed. Problem areas such as scratches, voids, adhesions, and wire bonding are illustrated by photomicrographs. This guide can serve as an effective tool in training personnel to perform precap visual inspections efficiently and reliably.

Source record↗
NASA NTRS1984

Inflight IFR procedures simulator

An inflight IFR procedures simulator for generating signals and commands to conventional instruments provided in an airplane is described. The simulator includes a signal synthesizer which generates predetermined simulated signals corresponding to signals normally received from remote sources upon being activated. A computer is connected to the signal synthesizer and causes the signal synthesizer to produce simulated signals responsive to programs fed into the computer. A switching network is connected to the signal synthesizer, the antenna of the aircraft, and navigational instruments and communication devices for selectively connecting instruments and devices to the synthesizer and disconnecting the antenna from the navigational instruments and communication device. Pressure transducers are connected to the altimeter and speed indicator for supplying electrical signals to the computer indicating the altitude and speed of the aircraft. A compass is connected for supply electrical signals for the computer indicating the heading of the airplane. The computer upon receiving signals from the pressure transducer and compass, computes the signals that are fed to the signal synthesizer which, in turn, generates simulated navigational signals.

Parker, L. C.↗
NASA NTRS1984

A substructure coupling procedure applicable to general linear time-invariant dynamic systems

A substructure synthesis procedure applicable to structural systems containing general nonconservative terms is presented. In their final form, the nonself-adjoint substructure equations of motion are cast in state vector form through the use of a variational principle. A reduced-order mode for each substructure is implemented by representing the substructure as a combination of a small number of Ritz vectors. For the method presented, the substructure Ritz vectors are identified as a truncated set of substructure eigenmodes, which are typically complex, along with a set of generalized real attachment modes. The formation of the generalized attachment modes does not require any knowledge of the substructure flexible modes; hence, only the eigenmodes used explicitly as Ritz vectors need to be extracted from the substructure eigenproblem. An example problem is presented to illustrate the method.

Howsman, T. G.↗
NASA NTRS1985

User's operating procedures. Volume 1: Scout project information programs

A review of the user's operating procedures for the Scout Project Automatic Data System, called SPADS is given. SPADS is the result of the past seven years of software development on a Prime minicomputer located at the Scout Project Office. SPADS was developed as a single entry, multiple cross reference data management and information retrieval system for the automation of Project office tasks, including engineering, financial, managerial, and clerical support. The instructions to operate the Scout Project Information programs in data retrieval and file maintenance via the user friendly menu drivers is presented.

Harris, C. G.↗
NASA NTRS1985

User's operating procedures. Volume 2: Scout project financial analysis program

A review is presented of the user's operating procedures for the Scout Project Automatic Data system, called SPADS. SPADS is the result of the past seven years of software development on a Prime mini-computer located at the Scout Project Office, NASA Langley Research Center, Hampton, Virginia. SPADS was developed as a single entry, multiple cross-reference data management and information retrieval system for the automation of Project office tasks, including engineering, financial, managerial, and clerical support. This volume, two (2) of three (3), provides the instructions to operate the Scout Project Financial Analysis program in data retrieval and file maintenance via the user friendly menu drivers.

Harris, C. G.↗
NASA NTRS1985

User's operating procedures. Volume 3: Projects directorate information programs

A review of the user's operating procedures for the scout project automatic data system, called SPADS is presented. SPADS is the results of the past seven years of software development on a prime mini-computer. SPADS was developed as a single entry, multiple cross-reference data management and information retrieval system for the automation of Project office tasks, including engineering, financial, managerial, and clerical support. This volume, three of three, provides the instructions to operate the projects directorate information programs in data retrieval and file maintenance via the user friendly menu drivers.

Haris, C. G.↗
NASA NTRS1984

Design procedures for fiber composite structural components - Rods, beams, and beam columns

Step by step procedures are described which are used to design structural components (rods, columns, and beam columns) subjected to steady state mechanical loads and hydrothermal environments. Illustrative examples are presented for structural components designed for static tensile and compressive loads, and fatigue as well as for moisture and temperature effects. Each example is set up as a sample design illustrating the detailed steps that are used to design similar components.

Chamis, C. C.↗
NASA NTRS1985

A procedure for the calculation of supersonic flows with strong viscous-inviscid interaction

The present paper is concerned with the calculation of strong viscous-inviscid interactions in two-dimensional laminar supersonic flows with and without separation. The equations solved are the so-called parabolized Navier-Stokes equations. The streamwise pressure gradient term is written as a combination of a forward and a backward difference to provide a path for upstream propagation of information. Global iteration is utilized to repeatedly update the pressure field from an initial guess until convergence is achieved. The numerical scheme employed is a new alternating direction explicit (ADE) procedure which is used as an alternative to the more difficult to program multigrid strategy to accelerate convergence. Results are presented for flows past two flat plate related bodies.

Barnett, M.↗
NASA NTRS1985

A solution procedure for two- and three-dimensional unsteady viscous flows

An efficient computational procedure for solving three-dimensional unsteady turbulent flows is described. The consistently split Linearized Block Implicit (LBI) scheme is used in conjunction with the QR operator scheme to solve an approximate form of the Navier-Stokes equations in generalized nonorthogonal coordinates employing physical velocity components. As a demonstration calculation the turbulent oscillating flow over a flat plate corresponding to the experiment of Karlsson is considered in both two and three dimensions. New inflow boundary conditions are proposed which yield physically plausible solutions near the upstream boundary. The results obtained agree both qualitatively and quantitatively with Karlsson's data and shed new light on the controversy concerning the interpretation of the skin friction phase angle as a function of reduced frequency.

Weinberg, B. C.↗
NASA NTRS1984

Development of numerical procedures for analysis of complex structures

The paper is concerned with the development of novel numerical procedures for the solution of static, stability, free vibration and dynamic response analysis of large, complex practical structures. Thus, details of numerical algorithms evolved for dynamic analysis of usual non-rotating and also rotating structures as well as finite dynamic elements are presented in the paper. Furthermore, the article provides some description of a general-purpose computer program STARS specifically developed for efficient analysis of complex practical structures.

Gupta, K. K.↗
NASA NTRS1985

A procedure for obtaining explicit solutions to a class of Fredholm integral equations

A Fredholm integral equation is solved in closed form by reducing it to a standard boundary value problem for a sectionally analytic function. The procedure maybe extended to more general classes of functions whose Fourier transforms only exist along certain lines in the complex k-plane. Examples are used to illustrate the results.

Goldstein, M. E.↗
NASA NTRS1984

A computer aided design procedure for generating gear teeth

A procedure for computer aided design (CAD) of gear teeth is presented. It is developed for generated teeth fabricated by a hob cutter or a shaper. It provides a means for analytically and numerically determining the tooth profile, given the cutter profile. An illustrative example with involute tooth profiles is given. Application with non-standard profiles and with bevel, spiral bevel, and hypoid gears is discussed.

Chang, S. H.↗