Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pointing control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

The possibility of using superconductive systems in the analysis of the composition of cosmic rays

The experimental results on the use of superconductive systems onboard of spacecraft are described. To ensure low temperatures in the cryostat under weightlessness, helium was used at a pressure above the critical pressure. In flight, the temperature was controlled at six points, while the pressure and intensity of the magnetic field were controlled in the solenoids. The methodical test proved it possible to mount special installations on satellites, with extensive magnetic fields based on superconductive alloys, and particularly, low weights and low power consumption magnetic analyzers.

Anashkin, O. P.↗

Control system technology and tradeoffs for large space structures

The role of the control system in large space structure design is examined. It is pointed out that control and dynamics aspects of the structure must be considered very early in the design. Innovative techniques will be needed, such as on-orbit dynamic testing, offsetting of disturbance torques, and advances in the analysis area, particularly with respect to system modeling and achieving a tractable dimension of the problem. The technology pursued, while necessarily being focused, must not be too narrow, but should be concerned with the multidisciplinary aspects of large space structures.

Blair, J. C.↗

Satellite power systems structures: A 1980 technology status review

The classes of major structural components and constructions utilized were considered. A review of the current (SPS) structure technology status was made. The major issues considered pertinent to SPS structures are: Cost effective construction, construction materials, structural design requirements, stress and dimensional integrity of as-built structures, and predictability of strength and dynamic behavior. The feasibility of passive figure control approach to MPTS flatness, of structure stiffness compatible with MPTS pointing, of passive control through damping, and the feasibility of space fabrication of ultra-large reflector surfaces are also considered. Qualification, model verification, inspection are considered of vital concern.

Greenberg, H. S.↗

Precise control of flexible manipulators

Experimental apparatus were developed for physically testing control systems for pointing flexible structures, such as limber spacecraft, for the case that control actuators cannot be collocated with sensors. Structural damping ratios are less than 0.003, each basic configuration of sensor/actuator noncollocation is available, and inertias can be halved or doubled abruptly during control maneuvers, thereby imposing, in particular, a sudden reversal in the plant's pole-zero sequence. First experimental results are presented, including stable control with both collocation and noncollocation.

Cannon, R. H., Jr.↗

Lenslet Array to Further Suppress Star Light for Direct Exoplanet Detection

Direct imaging plays a key role in the detection and characterization of exoplanets orbiting within its host star's habitable zone. Many innovative ideas for starlight suppression and wavefront control have been proposed and developed over the past decade. However, several technological challenges still lie ahead to achieve the required contrast, including controlling the observatory pointing performance, fabricating occulting masks with tight optical tolerances, developing wavefront control algorithms, controlling stray light, advancing single photon detecting detectors, and integrated system-level issues. This paper explores how a lenslet array and pinhole mask may be implemented to further suppress uncorrected starlight that leaks through the occulting mask. An external occulter, or star shade, is simulated to demonstrate this concept, although this approach can be implemented for internal coronagraphs as well. We describe how to use simple relay optics to control the scene near the inner working angle and the level of the suppression expected. Furthermore, if the lenslet array is the input to an integral field spectrograph, as planned for the WFIRST mission, the spectral content of the exoplanet atmospheres can be obtained to determine if the observed planet is habitable and ultimately, if it is inhabited.

Integral Field spectrograph↗

Modeling and analysis of an AMB system with flexible rotor in HTR-10GT - 18550

Active magnetic bearing (AMB) has been widely used in high-temperature gas-cooled reactor (HTR) for its specific properties: free of contact, absence of lubrication, capability of rotating at high speed. AMB system is inherently unstable since positive feedback exists in the open loop system and, thus, requires feedback control. From the control view of point, accurate system model is essential for designing of an effective controller especially when the flexible gyroscopic rotor is involved. In the paper, a flexible rotor and an open-loop AMB system model were established for the purpose of controller design. Dynamic characteristics of the undamped flexible rotor are analyzed including modal vibration analysis and undamped natural frequencies. Additionally, some characteristics of open-loop AMB system are investigated such as relationship between support stiffness and natural frequencies, and the system frequency response. The analysis results in this paper will provide valuable information for AMB system feedback controller design. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Lawrence Livermore National Security CFO Processes Functional Management Assessment

The scope of the Functional Management Assessment of the CFO included a review of the CFO Organizational Structure, including deployed financial services and the division of responsibilities and internal controls between CFO and other organizations that perform financial functions across the Laboratory. In addition, the assessment team solicited input from end users and reviewers. Three issues discussed are: ISSUE 1: Financial activities and cash transactions are occurring outside the CFO organization. Approximately $200M of non-purchase order spending occurs in seven areas outside CFO control (travel, relocation, special disbursements, IPO, legal, risk management, and freight). NIF financial services have not been integrated into the CFO organization and operate outside CFO control. Business risks--There is no single point of financial accountably; Currently within the CFO and Business and Operations organizations there is a lack of clarity of roles and responsibilities for financial activities; Financial talent within the laboratory is fragmented; and Inefficiencies exist based on the current structure; An example of the above business risks associated with organizational structure can be observed in the process for reimbursement of relocation costs to employees. Currently, Human Resources and Travel both administer portions of an employee's relocation. Costs are reviewed for compliance with FAR travel guidelines and for compliance with the offer letter but there is no financial review for allowability of costs nor is there a single point where the total relocation costs are reviewed. Through the e-pay system the check is processed by the CFO organization but there is no review by that organization. ISSUE 2: Impact of involuntary separation on current and future activities. 3 risks are: (1) Loss of internal controls--with the upcoming involuntary reductions there will be a loss of personnel with institutional knowledge which will increase the risk of losing internal control on some processes. The organization needs to be cognizant of this risk and take measures to minimize financial risk and ensure on-going A-123 compliance. (2) Project Costing Implementation (PCI) delay--the implementation of PCI is key to achieving integration and reporting of financial data. Presently, business analysts spend half of their time collecting and compiling data and 94% of the labs financial management reports are created using spreadsheets. Currently, the PCI project is on schedule but the involuntary reductions may result in loss of support in this area. (3) Financial Performance Milestones not met--for FY-08 there are fixed, base and stretch financial performance milestones for the laboratory. With reductions in staff the risk of missing key milestones increases. ISSUE 3: Strategically growing the Work for Others (WFO) Portfolio. A key objective of the laboratory is to increase WFO. Greater reliance on WFO will result in additional funding sources and increase the number of control points and financial activities to be monitored thus increasing the level of financial complexity at the lab. The CFO organization should work now to improve controls and processes to accommodate these changes. In particular the following areas should be focused on: (1) Cost reporting needs to be streamlined; (2) Cost Transfer controls need to be increased; and (3) Timely monitoring and close out of contracts needs occur.

99 GENERAL AND MISCELLANEOUS↗

Universal Prethermal Dynamics in Gross-Neveu-Yukawa Criticality

In this work, we study the prethermal dynamics of the Gross-Neveu-Yukawa quantum field theory, suddenly quenched in the vicinity of a critical point. We find that the universal prethermal dynamics is controlled by two fixed points depending on the size of the quench. Besides the usual equilibrium chiral Ising fixed point for a shallow quench, a dynamical chiral Ising fixed point is identified for a deep quench. Intriguingly, the latter is a nonthermal fixed point without any equilibrium counterpart due to the participation of gapless fermionic fields. We also find that in the scaling regime controlled by the equilibrium fixed point, the initial slip exponent is rendered negative if there are enough flavors of fermions, thus providing a unique signature of fermionic prethermal dynamics. We then explore the temporal crossover between the universal scaling regimes governed by the two universality classes. Possible experimental realizations are also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Effect of Lateral- and Longitudinal- Range Control on Allowable Entry Conditions for a Point Return from Space

The problem of return to a specified landing point on the earth from flight in space is considered by studying the interaction between an assumed control over the lateral and longitudinal range and the initial conditions of approach to the earth, given by orbital-plane inclination, vacuum perigee location, and time of arrival. The maneuvering capability in the atmosphere permits a point return for a range of entry conditions. A lateral-range capability of +/- 500 miles from the center line of an entry trajectory can allow a variation in the time of arrival of over 3.5 hours. Variation in the orbital-plane inclination angle can be as much as +/- 13 deg.

Boissevain, Alfred G.↗

Digital controller design: Analysis of the annular suspension pointing system

The annular suspension and pointing system (ASPS) a payload auxiliary pointing device of the space shuttle is briefly described along with the function of the digital controller. The equations of motion of a simplified plan planar model of the ASPS are derived. Results of computer simulations are discussed.

Source record↗

Design and Integration of an All-Magnetic Attitude Control System for FASTSAT-HSV01's Multiple Pointing Objectives

The FASTSAT-HSV01 spacecraft is a microsatellite with magnetic torque rods as it sole attitude control actuator. FASTSAT s multiple payloads and mission functions require the Attitude Control System (ACS) to maintain Local Vertical Local Horizontal (LVLH)-referenced attitudes without spin-stabilization, while the pointing errors for some attitudes be significantly smaller than the previous best-demonstrated for this type of control system. The mission requires the ACS to hold multiple stable, unstable, and non-equilibrium attitudes, as well as eject a 3U CubeSat from an onboard P-POD and recover from the ensuing tumble. This paper describes the Attitude Control System, the reasons for design choices, how the ACS integrates with the rest of the spacecraft, and gives recommendations for potential future applications of the work.

DeKock, Brandon↗

Automatic control of cryogenic wind tunnels

Inadequate Reynolds number similarity in testing of scaled models affects the quality of aerodynamic data from wind tunnels. This is due to scale effects of boundary-layer shock wave interaction which is likely to be severe at transonic speeds. The idea of operation of wind tunnels using test gas cooled to cryogenic temperatures has yielded a quantrum jump in the ability to realize full scale Reynolds number flow similarity in small transonic tunnels. In such tunnels, the basic flow control problem consists of obtaining and maintaining the desired test section flow parameters. Mach number, Reynolds number, and dynamic pressure are the three flow parameters that are usually required to be kept constant during the period of model aerodynamic data acquisition. The series of activity involved in modeling, control law development, mechanization of the control laws on a microcomputer, and the performance of a globally stable automatic control system for the 0.3-m Transonic Cryogenic Tunnel (TCT) are discussed. A lumped multi-variable nonlinear dynamic model of the cryogenic tunnel, generation of a set of linear control laws for small perturbation, and nonlinear control strategy for large set point changes including tunnel trajectory control are described. The details of mechanization of the control laws on a 16 bit microcomputer system, the software features, operator interface, the display and safety are discussed. The controller is shown to provide globally stable and reliable temperature control to + or - 0.2 K, pressure to + or - 0.07 psi and Mach number to + or - 0.002 of the set point value. This performance is obtained both during large set point commands as for a tunnel cooldown, and during aerodynamic data acquisition with intrusive activity like geometrical changes in the test section such as angle of attack changes, drag rake movements, wall adaptation and sidewall boundary-layer removal. Feasibility of the use of an automatic Reynolds number control mode with fixed Mach number control is demonstrated.

Balakrishna, S.↗

Is Stereotactic Body Radiation Therapy an Attractive Option for Unresectable Liver Metastases? A Preliminary Report From a Phase 2 Trial

Purpose: To evaluate the feasibility of high-dose stereotactic body radiation therapy (SBRT) in the treatment of unresectable liver metastases. Methods and Materials: Patients with 1 to 3 liver metastases, with maximum individual tumor diameters less than 6 cm and a Karnofsky Performance Status of at least 70, were enrolled and treated by SBRT on a phase 2 clinical trial. Dose prescription was 75 Gy on 3 consecutive days. SBRT was delivered using the volumetric modulated arc therapy by RapidArc (Varian, Palo Alto, CA) technique. The primary end-point was in-field local control. Secondary end-points were toxicity and survival. Results: Between February 2010 and September 2011, a total of 61 patients with 76 lesions were treated. Among the patients, 21 (34.3%) had stable extrahepatic disease at study entry. The most frequent primary sites were colorectal (45.9%) and breast (18%). Of the patients, 78.7% had 1 lesion, 18.0% had 2 lesions, and 3.3% had 3 lesions. After a median of 12 months (range, 2-26 months), the in-field local response rate was 94%. The median overall survival rate was 19 months, and actuarial survival at 12 months was 83.5%. None of the patients experienced grade 3 or higher acute toxicity. No radiation-induced liver disease was detected. One patient experienced G3 late toxicity at 6 months, resulting from chest wall pain. Conclusions: SBRT for unresectable liver metastases can be considered an effective, safe, and noninvasive therapeutic option, with excellent rates of local control and a low treatment-related toxicity.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Regions of stability with unequal saturation limits and non-zero set point

Constraints on the magnitudes of control variables limit the region where open-loop unstable systems can be stabilized using feedback control. Variations in regions of stability with unequal control saturation limits and non-zero set points are illustrated for single-input unstable linear systems which have one or two unstable eigenvalues. The regions of stability for saddle-point- and unstable-node-type singularities increase with the increase in one of the saturation limits, but they become invariant when the larger control limit exceeds a certain value; the stability regions vanish for non-zero set-points that saturate the controls. The unstable-focus-type singularity exhibits strikingly different characteristics. These results suggest guidelines for obtaining desired stability regions for different types of singularities.

Stengel, R. F.↗

A tensor approach to modeling of nonhomogeneous nonlinear systems

Model following control methodology plays a key role in numerous application areas. Cases in point include flight control systems and gas turbine engine control systems. Typical uses of such a design strategy involve the determination of nonlinear models which generate requested control and response trajectories for various commands. Linear multivariable techniques provide trim about these motions; and protection logic is added to secure the hardware from excursions beyond the specification range. This paper reports upon experience in developing a general class of such nonlinear models based upon the idea of the algebraic tensor product.

Yurkovich, S.↗

Orbital transfer vehicle propulsion issues

The development of a reusable and space-based orbital transfer vehicle (OTV) necessitates an integral approach toward structural and propulsion subsystems design. A single engine installation necessitates moving the engine further aft and/or relocation of the engine gimbal point to accommodate vehicle control requirements. Penalties associated with gimbal point relocation without increasing stage length or modifying typical advanced engine concepts, as well as a method for minimizing such penalties, are presented for a single engine toroidal tank OTV configuration. Alternative integrated vehicle structure/engine concepts are also presented for multi-engine configurations. Features of these potential concepts are given which indicate the need for substantial additional study of feedline gimbal alternatives before firmly establishing advanced engine design. The issue of vehicle/engine integration is addressed in three areas: interfaces (physical and functional), installation requirements, and reliability apportionment (i.e., number of engines required to assure mission completion).

Bergeron, R. P.↗