Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ocean waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Extracting energy from ocean thermal and salinity gradients to power unmanned underwater vehicles: State of the art, current limitations, and future outlook

Thermal gradient energy-generation technologies for powering unmanned underwater vehicles (UUVs) or autonomous sensing systems in the ocean are mainly in the research development phase or commercially available at a limited scale, and salinity-gradient energy-generation technologies have not been adequately researched yet. The demand for self-powered UUVs suitable for long-term deployments has been growing, and further research related to small-scale ocean gradient energy systems is needed. In this study, we conducted a comprehensive review about harvesting energy from ocean thermal or salinity gradients for powering UUVs, focusing on gliders and profiling floats. Thermal gradient energy systems for UUVs based on phase change materials (PCM) cannot provide the energy required for powering autonomous sensing systems because of the systems' low energy conversion efficiency. Besides reducing energy consumption by developing more efficient electrical-mechanical systems, enhancing the thermal conductivity of the PCMs may help address this challenge by increasing the power generation rate of the UUVs. Several other emerging technologies, such as thermoelectric generators, shape memory alloys, and small-scale thermodynamic cycle systems, have shown potential for powering UUVs, but they are still only at the laboratory testing or conceptual design phase. The most advanced power generation technologies based on salinity gradients, reverse electrodialysis and pressure-retarded osmosis, are still not economically viable for large-scale deployment, mainly because of the high cost of the components required to operate in harsh saline environments. Our feasibility evaluation showed that existing salinity gradient power generation technologies are not directly feasible for powering UUVs in the open ocean.

16 TIDAL AND WAVE POWER↗

A 7.5-Year Dataset of SSM/I-Derived Surface Turbulent Fluxes Over Global Oceans

The surface turbulent fluxes of momentum, latent heat, and sensible heat over global oceans are essential to weather, climate and ocean problems. Wind stress is the major forcing for driving the oceanic circulation, while Evaporation is a key component of hydrological cycle and surface heat budget. We have produced a 7.5-year (July 1987-December 1994) dataset of daily, individual monthly-mean and climatological (1988-94) monthly-mean surface turbulent fluxes over the global oceans from measurements of the Special Sensor Microwave/Imager (SSM/I) on board the US Defense Meteorological Satellite Program F8, F10, and F11 satellites. It has a spatial resolution of 2.0x2.5 latitude-longitude. Daily turbulent fluxes are derived from daily data of SSM/I surface winds and specific humidity, National Centers for Environmental Prediction (NCEP) sea surface temperatures, and European Centre for Medium-Range Weather Forecasts (ECMWF) air-sea temperature differences, using a stability-dependent bulk scheme. The retrieved instantaneous surface air humidity (with a 25-km resolution) IS found to be generally accurate as compared to the collocated radiosonde observations over global oceans. The surface wind speed and specific humidity (latent heat flux) derived from the F10 SSM/I are found to be -encrally smaller (larger) than those retrieved from the F11 SSM/I. The F11 SSM/I appears to have slightly better retrieval accuracy for surface wind speed and humidity as compared to the F10 SSM/I. This difference may be due to the orbital drift of the F10 satellite. The daily wind stresses and latent heat fluxes retrieved from F10 and F11 SSM/Is show useful accuracy as verified against the research quality in si -neasurerrients (IMET buoy, RV Moana Wave, and RV Wecoma) in the western Pacific warm pool during the TOGA COARE Intensive observing period (November 1992-February 1993). The 1988-94 seasonal-mean turbulent fluxes and input variables derived from FS and F11 SSM/Is show reasonable patterns related to seasonal variations of atmospheric general circulation. This dataset of SSM/I-derived turbulent fluxes is useful for climate studies, forcing of ocean models, and validation of coupled ocean-atmosphere global models and can be accessed through the NASA/GSFC Distributed Active Archive Center.

Chou, Shu-Hsien↗

Observations of oceanic white caps for moderate to highwind speeds

A series of photographs of sea surface whitecap conditions for wind speeds of 10 to 25 m/sec was obtained and analyzed for areal coverage of white water. The results are in good agreement with semiempirical calculations based on the wind speed and the development of the wave spectrum only when the contribution of thin foam streaks oriented in the direction of the wind is neglected. Since both the actively forming whitecaps and the thin foam streaks contribute significantly to the microwave emissivity of the sea surface, it is important that the foam streaks be included in the theory but differentiated from large white caps and foam patches. A simple relationship that accounts for the foam streaks based on the rate of energy transfer, the wind speed, and the wave spectrum is proposed. By means of empirically derived constant terms for the microwave signatures of white caps and foam streaks, this theory was adapted to the prediction of the increase in brightness temperature due to foam, with reasonable results to wind speeds of 20 m/sec.

Ross, D. B.↗

Hawaii Ocean Mixing Experiment: Program Summary

It is becoming apparent that insufficient mixing occurs in the pelagic ocean to maintain the large scale thermohaline circulation. Observed mixing rates fall a factor of ten short of classical indices such as Munk's "Abyssal Recipe." The growing suspicion is that most of the mixing in the sea occurs near topography. Exciting recent observations by Polzin et al., among others, fuel this speculation. If topographic mixing is indeed important, it must be acknowledged that its geographic distribution, both laterally and vertically, is presently unknown. The vertical distribution of mixing plays a critical role in the Stommel Arons model of the ocean interior circulation. In recent numerical studies, Samelson demonstrates the extreme sensitivity of flow in the abyssal ocean to the spatial distribution of mixing. We propose to study the topographic mixing problem through an integrated program of modeling and observation. We focus on tidally forced mixing as the global energetics of this process have received (and are receiving) considerable study. Also, the well defined frequency of the forcing and the unique geometry of tidal scattering serve to focus the experiment design. The Hawaiian Ridge is selected as a study site. Strong interaction between the barotropic tide and the Ridge is known to take place. The goals of the Hawaiian Ocean Mixing Experiment (HOME) are to quantify the rate of tidal energy loss to mixing at the Ridge and to identify the mechanisms by which energy is lost and mixing generated. We are challenged to develop a sufficiently comprehensive picture that results can be generalized from Hawaii to the global ocean. To achieve these goals, investigators from five institutions have designed HOME, a program of historic data analysis, modeling and field observation. The Analysis and Modeling efforts support the design of the field experiments. As the program progresses, a global model of the barotropic (depth independent) tide, and two models of the baroclinic (depth varying) tide, all validated with near-Ridge data, will be applied, to reveal the mechanisms of tidal energy conversion along the Ridge, and allow spatial and temporal integration of the rate of conversion. Field experiments include a survey to identify "hot spots" of enhanced mixing and barotropic to baroclinic conversion, a Nearfield study identifying the dominant mechanisms responsible for topographic mixing, and a Farfield program which quantifies the barotropic energy flux convergence at the Ridge and the flux divergence associated with low mode baroclinic waves radiation. The difference is a measure of the tidal power available for mixing at the Ridge. Field work is planned from years 2000 through 2002, with analysis and modeling efforts extending through early 2006. If successful, HOME will yield an understanding of the dominant topographic mixing processes applicable throughout the global ocean. It will advance understanding of two central problems in ocean science, the maintenance of the abyssal stratification, and the dissipation of the tides. HOME data will be used to improve the parameterization of dissipation in models which presently assimilate TOPEX-POSEIDON observations. The improved understanding of the dynamics and spatial distribution of mixing processes will benefit future long-term programs such as CLIVAR.

Ray, Richard D.↗

Uncertainty in Simulating Twentieth Century West African Precipitation Trends: The Role of Anthropogenic Aerosol Emissions

Anthropogenic aerosol emissions from North America and Europe have strong effects on the decadal variability of the West African monsoon (WAM). Anthropogenic aerosol effective radiative forcing is model dependent, but the impact of such uncertainty on the simulation of long-term WAM variability is unknown. We use an ensemble of simulations with HadGEM3-GC3.1 that span the most recent estimates in simulated anthropogenic aerosol effective radiative forcing. We show that uncertainty in anthropogenic aerosol radiative forcing leads to significant uncertainty at simulating multi-decadal trends in West African precipitation. At the large scale, larger forcing leads to a larger decrease in the interhemispheric temperature gradients, in temperature over both the North Atlantic Ocean and northern Sahara. There are also differences in dynamic changes specific to the WAM (locations of the Saharan heat low and African Easterly Jet, of the strength of the West African westerly jet, and of African Easterly Wave activity). We also assess effects on monsoon precipitation characteristics and temperature. We show that larger aerosol forcing results in a decrease of the number of rainy days and of heavy and extreme precipitation events and warm spells. However, simulated changes in onset and demise dates do not appear to be sensitive to the magnitude of aerosol forcing. Our results demonstrate the importance of reducing the uncertainty in anthropogenic aerosol forcing for understanding and predicting multi-decadal variability in the WAM.

54 ENVIRONMENTAL SCIENCES↗

The seasonal circulation of the upper ocean in the Bay of Bengal

The present analysis of results generated by a multilayer, adiabatic, monthly mean wind-driven numerical model of the upper Indian Ocean indicates that its simulated northeastern currents are in general agreement with observations and interpretations. Attention is given to the large anticyclonic flow during Northern Hemisphere winter. The model's layer-thickness reveals the propagation of Kelvin waves along the coast, travelling the entire perimeter of the Andaman Sea and Bay of Bengal; this wave excites westward-propagating Rossby waves into the bay's interior. A time-series analysis of transport calculations yields peaks in the 20-30 day and 50-60 day ranges which are unlikely to have been directly forced by the applied stress.

Potemra, James T.↗

Satellite observations of mesoscale features in lower Cook Inlet and Shelikof Strait, Gulf of Alaska

The Seasat satellite launched in Summer 1978 carried a synthetic aperture radar (SAR). Although Seasat failed after 105 days in orbit, it provided observations that demonstrate the potential to examine and monitor upper oceanic processes. Seasat made five passes over lower Cook Inlet and Shelikof Strait, Alaska, during Summer 1978. SAR images from the passes show oceanographic features, including a meander in a front, a pair of mesoscale eddies, and internal waves. These features are compared with contemporary and representative images from a satellite-borne Advanced Very High Resolution Radiometer (AVHRR) and Coastal Zone Color Scanner (CZCS), with water property data, and with current observations from moored instruments. The results indicate that SAR data can be used to monitor mesoscale oceanographic features.

Schumacher, James D.↗

Environmental Consequences of Big Nasty Impacts on the Early Earth

The geological record of the Archean Earth is spattered with impact spherules from a dozen or so major cosmic collisions involving Earth and asteroids or comets (Lowe, Byerly 1986, 2015). Extrapolation of the documented deposits suggests that most of these impacts were as big or bigger than the Chicxulub event that famously ended the reign of the thunder lizards. As the Archean impacts were greater, the environmental effects were also greater. The number and magnitude of the impacts is bounded by the lunar record. There are no lunar craters bigger than Chicxulub that date to Earth's mid-to-late Archean. Chance dictates that Earth experienced no more than approximately 10 impacts bigger than Chicxulub between 2.5 billion years and 3.5 2.5 billion years, the biggest of which were approximately30-100 times more energetic, comparable to the Orientale impact on the Moon (1x10 (sup 26) joules). To quantify the thermal consequences of big impacts on old Earth, we model the global flow of energy from the impact into the environment. The model presumes that a significant fraction of the impact energy goes into ejecta that interact with the atmosphere. Much of this energy is initially in rock vapor, melt, and high speed particles. (i) The upper atmosphere is heated by ejecta as they reenter the atmosphere. The mix of hot air, rock vapor, and hot silicates cools by thermal radiation. Rock raindrops fall out as the upper atmosphere cools. (ii) The energy balance of the lower atmosphere is set by radiative exchange with the upper atmosphere and with the surface, and by evaporation of seawater. Susequent cooling is governed by condensation of water vapor. (iii) The oceans are heated by thermal radiation and rock rain and cooled by evaporation. Surface waters become hot and salty; if a deep ocean remains it is relatively cool. Subsequently water vapor condenses to replenish the oceans with hot fresh water (how fresh depending on continental weathering, which might be rather rapid under the circumstances). (iv) The surface temperature of dry land is presumed to be the same as the lower atmosphere. A thermal wave propagates into the land at a rate set by conduction. Impacts not greatly larger than Chicxulub can raise the surface temperature by tens, hundreds, or even thousands of degrees, and evaporate meters to hundreds of meters of water. The biggest should have vitrified exposed dry land. More results are for the talk, as here we have run out of space.

asteroids↗

Environmental Consequences of Big Nasty Impacts on the Early Earth

The geological record of the Archean Earth is spattered with impact spherules from a dozen or so major cosmic collisions involving Earth and asteroids or comets (Lowe, Byerly 1986, 2015). Extrapolation of the documented deposits suggests that most of these impacts were as big or bigger than the Chicxulub event that famously ended the reign of the thunder lizards. As the Archean impacts were greater, the environmental effects were also greater. The number and magnitude of the impacts is bounded by the lunar record. There are no lunar craters bigger than Chicxulub that date to Earth's mid-to-late Archean. Chance dictates that Earth experienced no more than approximately 10 impacts bigger than Chicxulub between 2.5 billion years and 3.5 billion years, the biggest of which were approximately 30-100 times more energetic, comparable to the Orientale impact on the Moon (1x10 (sup 26) joules). To quantify the thermal consequences of big impacts on old Earth, we model the global flow of energy from the impact into the environment. The model presumes that a significant fraction of the impact energy goes into ejecta that interact with the atmosphere. Much of this energy is initially in rock vapor, melt, and high speed particles. (i) The upper atmosphere is heated by ejecta as they reenter the atmosphere. The mix of hot air, rock vapor, and hot silicates cools by thermal radiation. Rock raindrops fall out as the upper atmosphere cools. (ii) The energy balance of the lower atmosphere is set by radiative exchange with the upper atmosphere and with the surface, and by evaporation of seawater. Susequent cooling is governed by condensation of water vapor. (iii) The oceans are heated by thermal radiation and rock rain and cooled by evaporation. Surface waters become hot and salty; if a deep ocean remains it is relatively cool. Subsequently water vapor condenses to replenish the oceans with hot fresh water (how fresh depending on continental weathering, which might be rather rapid under the circumstances). (iv) The surface temperature of dry land is presumed to be the same as the lower atmosphere. A thermal wave propagates into the land at a rate set by conduction. Impacts not greatly larger than Chicxulub can raise the surface temperature by tens, hundreds, or even thousands of degrees, and evaporate meters to hundreds of meters of water. The biggest should have vitrified exposed dry land. More results are for the talk, as here we have run out of space.

Archean Earth↗

Warm‐Season Afternoon Precipitation Peak in the Central Bay of Bengal: Process‐Oriented Diagnostics

Abstract Past studies have indicated that precipitation over tropical open oceans generally peaks in the early morning. However, an intriguing departure from this pattern is observed in the central Bay of Bengal (CBoB), where rainfall exhibits a distinct afternoon peak during the South Asian summer monsoon season. By using a novel satellite‐based cloud classification and tracking data set, we found that more than 75% of the afternoon rainfall (15–17 LST) over the CBoB comes from mesoscale convective systems (MCSs). Most of the MCSs contributing to the CBoB afternoon rainfall peak originate either locally over the CBoB or near the west and east coasts of the BoB, in contrast to the northern BoB as highlighted in previous studies. Analyses show that MCSs initiated near coastlines are primarily influenced by land‐sea breezes, whereas MCSs initiated over the BoB open ocean during early morning are strongly associated with diurnal radiative forcings. In addition, there are clear diurnal propagating MCS initiation signals from the west and north coastlines of the BoB to the CBoB, which are related to diurnal gravity waves emitted from the coastlines. The thermodynamic conditions conducive to MCS initiation over different sub‐regions of the BoB are also investigated. No systematic differences found in environmental convective available potential energy between days with and without MCS initiation. However, over most sub‐regions, days with MCS initiation generally have higher total column water vapor than days without MCS initiation. This difference suggests that the lower‐free‐tropospheric moisture content plays an important role in MCS initiation over the BoB.

54 ENVIRONMENTAL SCIENCES↗

IEA Wind TCP Task 49: Reference Site Conditions for Floating Wind Arrays

This report, prepared within Work package 1 of IEA Wind Task 49, presents reference site conditions for floating wind arrays to serve as a design basis for the techno-economic design of reference floating wind arrays. Data of the reference sites presented here are publicly available in an open database and thus support fast development and comparable design of floating wind arrays for various relevant conditions. The development of these reference sites drew on existing open access datasets and ongoing research projects of task participants. Six classes were identified that describe relevant key conditions for the design and development of floating wind arrays: met-ocean conditions, seabed conditions, coastal infrastructure, environmental impact, socio-economic impact, as well as regulations and permissions. The reference sites for the techno-economic design of floating wind arrays are based on a concept with building blocks to synthesize purpose-built site representations. In each of the identified classes with influencing design factors, building blocks are used to describe the characteristic properties and their spread. However, the latter three classes (i.e., environmental impact, socio-economic impact, regulations and permissions) are not included in the reference site conditions due to limited knowledge and lack of reliable criteria to quantify their impact on the techno-economic design in numeric parameters. Building blocks with key parameters for the techno-economic design of floating wind arrays are provided for met-ocean conditions, seabed conditions, and coastal infrastructure. For met-ocean conditions, multiple sites were selected for detailed analysis that represent a range of conditions across the pipeline of floating wind projects. Wind conditions and sea states are separated, and each location considers both the severity of wind and waves e.g. one site may have a moderate wave condition but severe wind condition. From this pipeline, eleven representative sites were selected where both site-specific analysis was available within the consortium, and where they represent different parts of the global pipeline. The eleven sites are: Hannibal (Italy), Humboldt (US), Ulsan (South Korea), MoneyPoint One (Ireland), Havbredey (UK), Fukushima (Japan), Utsira Nord (Norway), Gulf of Maine (US), Sud de la Bretagne II (France), Sorlige Nordsjo II (Norway). Each of these sites is summarized in the main report while more details about the studies and analyses behind the datasets are provided in the appendix. For seabed conditions, general information about the geotechnical parameters is provided and a baseline is established for the geotechnical parameters and stratigraphy that may be encountered on the sites. A set of six 'synthetic cases' is defined as building blocks providing the different parameters required for design under each case/soil condition. For the coastal infrastructure, general information about the main requirements is provided that a port should comply with to provide a satisfactory service during the construction of floating offshore wind arrays. Minimum port infrastructural requirements are provided for three types of ports.

17 WIND ENERGY↗

Air-sea interaction and remote sensing

The first part of the proposed research was a joint effort between our group and the Applied Physics Laboratory (APL), University of Washington. Our own research goal is to investigate the relation between the air-sea exchange processes and the sea state over the open ocean and to compare these findings with our previous results obtained over a small body of water namely, Lake Washington. The goals of the APL researchers are to study (1) the infrared sea surface temperature (SST) signature of breaking waves and surface slicks, and (2) microwave and acoustic scattering from water surface. The task of our group in this joint effort is to conduct measurements of surface fluxes (of momentum, sensible heat, and water vapor) and atmospheric radiation (longwave and shortwave) to achieve our research goal as well as to provide crucial complementary data for the APL studies. The progress of the project is summarized.

Katsaros, Kristina B.↗

Variability in equatorial Pacific sea surface topography during the verification phase of the TOPEX/POSEIDON mission

As part of the verification phase of the TOPEX/POSEIDON mission, 10-day gridded fields of altimeter data derived from TOPEX geophysical data records are compared with 10-day gridded fields of dynamic height derived from more than 60 moorings of the Tropical Ocean and Global Atmosphere-Tropical Atmosphere Ocean (TOGA-TAO) array in the equatorial Pacific Ocean. Access to TAO data in real time permits the first 500 days of the TOPEX/POSEIDON mission to be placed in the context of complementary, in-situ measurements of surface winds, sea surface temperatures, and upper ocean thermal structure, as well as the time history of these variables prior to launch. Analysis of the space-time structure in the TOPEX and TAO surface topography data increases sea level variability primarily due to equatorial Kelvin wave activity generated by intense wind bursts west of the date line in association with the 1991-1993 El Nino. Cross correlations between the two data sets are generally greater than 0.7, with root mean square (RMS) differences less than 4 cm. However, for reasons not fully understood, correlations drop to less than 0.5 in certain regions off the equator in the eastern Pacific and RMS differences can be greater than 5 cm north of the equator in the central and eastern Pacific.

Busalacchi, Antonio J.↗

Asian Monsoons: Variability, Predictability, and Sensitivity to External Forcing

In this study, we have addressed the interannual variations of Asian monsoons including both broad-scale and regional monsoon components. Particular attention is devoted to the identities of the South China Sea monsoon and Indian monsoon. We use CPC Merged Analysis of Precipitation and NCEP reanalyses to define regional monsoon indices and to depict the various monsoons. Parallel modeling studies have also been carried out to assess the role of boundary forcing and the potential predictability of the monsoons. Each monsoon is characterized by its unique features. While the South Asian monsoon represents a classical monsoon in which anomalous circulation is governed by Rossby-wave dynamics, the Southeast Asian monsoon symbolizes a "hybrid" monsoon that features multi-cellular meridional circulation over eastern Asia. The broad-scale Asian monsoon links to the basin-wide atmospheric circulation over the Indian-Pacific oceans. Both SST and land surface processes are important for determining the variations of all monsoons. For the broad-scale monsoon, SST anomalies are more important than land surface processes. For regional monsoons, however, land surface processes may become equally important. Both observation and model shows that the broad-scale monsoon is potentially more predictable than regional monsoons, and that the Southeast Asian monsoon may possess higher predictability than the South Asian monsoon.

Yang, Song↗

Asian Monsoons: Variability, Predictability, and Sensitivity to External Forcing

In this study, we have addressed the interannual variations of Asian monsoons including both broad-scale and regional monsoon components. Particular attention is devoted to the identities of the South China Sea monsoon and Indian monsoon. We use CPC Merged Analysis of Precipitation and NCEP reanalyses to define regional monsoon indices and to depict the various monsoons. Parallel modeling studies have also been carried out to assess the potential predictability of the broad-scale and regional monsoons. Each monsoon is characterized by its unique features. While the South Asian monsoon represents a classical monsoon in which anomalous circulation is governed by Rossby-wave dynamics, the Southeast Asian monsoon symbolizes a "hybrid" monsoon that features multi-cellular meridional circulation over eastern Asia. The broad-scale Asian monsoon links to the basin-wide atmospheric circulation over the Indian-Pacific oceans. Both Sea Surface Temperatures (SST) and land surface processes are important for determining the variations of all monsoons. For the broad-scale monsoon, SST anomalies are more important than land surface processes. However, for regional monsoons, land surface processes may become equally important. Both observation and model shows that the broad-scale monsoon is potentially more predictable than regional monsoons, and that the Southeast Asian monsoon may possess higher predictability than the South Asian monsoon.

Yang, Song↗

Assessment of Satellite Sea Surface Salinity Products Using a Coupled ENSO Prediction Model

Much work has gone into revising and updating algorithms for converting satellite-measured radiances to useful ocean variables like sea surface salinity (e.g. SMOS - Boutin et al., 2017, SMAP - Fore et al., 2016 and Aquarius - Meissner et al., 2018). As part of our Ocean Salinity Science Team work, we utilize an intermediate-complexity air/sea coupled model as a transfer function to test if more mature satellite SSS model algorithms actually improve ENSO forecast skill. For initialization of the coupled forecast, we demonstrate that the positive impact of SSS assimilation is brought about by surface freshening near the eastern edge of the western Pacific warm pool and density changes that lead to shallower mixed layer between 10S-5N. In addition, salting near the ITCZ leads to a deepening of the mixed layer and thermocline near 8N. These patterns together provide the background state to amplify equatorial Kelvin waves and improve ENSO hindcasts (Hackert et al., 2019). Here we extend this work to compare the impact of various pairs of original and improved satellite SSS algorithms. For instance we compare SMAP V4.1 with the latest, SMAP V4.2, to see what impact algorithm improvements may have on ENSO forecasts. SSS observations are tested on seasonal to interannual variability of tropical Indo-Pacific Ocean dynamics as well as on dynamical ENSO forecasts by initializing twelve-month forecasts for each month of available data. All experiments assimilate satellite sea level (SL), sea surface temperature (SST), and in situ subsurface temperature and salinity observations (Tz, Sz). Additionally various satellite, blended, and in-situ SSS products are assimilated. We find that including satellite SSS significantly improves Niño3.4 sea surface temperature anomaly validation, more mature SSS model algorithms are generally improving ENSO forecasts over time, and more satellite SSS data coverage helps to extend useful forecasts.

Ocean↗

Storm-Associated Microwave Radiometric Signatures in the Frequency Range of 90-220 GHz

Radiometric measurements were made by a millimeter-wave imaging radiometer (MIR) at the frequencies of 89, 150, 183.3 +/- 1, 183.3 +/- 3, 183.3 +/- 7, and 220 GHz aboard the NASA ER-2 aircraft at an altitude of about 20 km over two rainstorms: one in the western Pacific Ocean on 19 January 1993 and another in southern Florida on 5 October 1993. These measurements were complemented by nearly simultaneous observations by other sensors aboard the same aircraft and another aircraft flying along the same path. Analysis of data from these measurements, aided by radiative transfer and radar reflectivity calculations of hydrometeor profiles, which arc generated by a general cloud ensemble model, demonstrates the utility of these frequencies for studying the structure of frozen hydrometeors associated with storms. Particular emphasis is placed on the three water vapor channels near 183.3 GHz. Results show that the radiometric signatures measured by these channels over the storm-associated scattering media bear a certain resemblance to those previously observed over a clear and fairly dry atmosphere with a cold ocean background. Both of these atmospheric conditions are characterized by a small amount of water vapor above a cold background. Radiative transfer calculations were made at these water vapor channels for a number of relative humidity profiles characterizing dry atmospheres over an ocean surface. The results are compared with the measurements to infer some characteristics of the environment near the scattering media. Furthermore, radiometric signatures from these channels display unique features for towering deep convective cells that could be used to identify the presence of such cells in storms.

Wang, James R.↗