Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Imaginary modulation inducing giant spatial Goos–Hänchen shifts in one-dimensional defective photonic lattices

We investigate the spatial Goos–Hänchen (GH) shifts in one-dimensional defective photonic lattices by modulating the imaginary part of refractive index, namely, the imaginary modulation. The reflection spectra possess two singular points under imaginary modulation when the reflectance is infinite or vanishing. These two points correspond to the coherent-perfect-absorption-laser (CPA-LP) point and defect mode (MD) in the parameter space composed of the incident angle and refractive index. We show the spatial GH shifts are extremely giant in the vicinity of CPA-LP and MD as the phase of reflection coefficients dislocate. Moreover, the GH shifts are sensitive to the incident angle and the refractive index of defect. The sensitivity coefficients can reach as high as 10{sup 6}. The study may find potential applications in highly sensitive sensors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of Thermoelectric Module Efficiency A Survey

The development of thermoelectrics (TE) for energy conversion is in the transition phase from laboratory research to device development. There is an increasing demand to accurately determine the module efficiency, especially for the power generation mode. For many thermoelectrics, the figure of merit, ZT, of the material sometimes cannot be fully realized at the device level. Reliable efficiency testing of thermoelectric modules is important to assess the device ZT and provide the end-users with realistic values on how much power can be generated under specific conditions. We conducted a general survey of efficiency testing devices and their performance. The results indicated the lack of industry standards and test procedures. This study included a commercial test system and several laboratory systems. Most systems are based on the heat flow meter method and some are based on the Harman method. They are usually reproducible in evaluating thermoelectric modules. However, cross-checking among different systems often showed large errors that are likely caused by unaccounted heat loss and thermal resistance. Efficiency testing is an important area for the thermoelectric community to focus on. A follow-up international standardization effort is planned.

efficiency↗

Two-component vector solitons in defocusing Kerr-type media with spatially modulated nonlinearity

We present a class of exact solutions to the coupled (2+1)-dimensional nonlinear Schrödinger equation with spatially modulated nonlinearity and a special external potential, which describe the evolution of two-component vector solitons in defocusing Kerr-type media. We find a robust soliton solution, constructed with the help of Whittaker functions. For specific choices of the topological charge, the radial mode number and the modulation depth, the solitons may exist in various forms, such as the half-moon, necklace-ring, and sawtooth vortex-ring patterns. Our results show that the profile of such solitons can be effectively controlled by the topological charge, the radial mode number, and the modulation depth. - Highlights: • Two-component vector soliton clusters in defocusing Kerr-type media are reported. • These soliton clusters are constructed with the help of Whittaker functions. • The half-moon, necklace-ring and vortex-ring patterns are found. • The profile of these solitons can be effectively controlled by three soliton parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A transmissive concentrator photovoltaic module with cells directly cooled by silicone oil for solar cogeneration systems

Hybrid concentrator photovoltaic-thermal systems can cogenerate electricity and heat by beam-splitting incoming concentrated light onto photovoltaic cells and a thermal receiver to increase total conversion efficiency and potentially reduce system cost. To demonstrate this, we have designed and prototyped a transmissive spectrum-splitting concentrator photovoltaic module that maximizes solar energy conversion by utilizing the entire solar spectrum. Visible light is collected using infrared-transmissive triple-junction photovoltaic cells to achieve an in-band module efficiency of 43.3% for light of wavelength λ < 873 nm, while 44.2% of out-of-band light with λ > 873 nm is transmitted through for collection by a thermal receiver. During testing on a dual-axis tracked parabolic concentrator dish at up to 166 suns, cell temperatures were maintained at 119 °C or below via a novel active cooling method. This cooling system strictly flows silicone oil directly across both sides of the cells, without inhibiting optical transmission, as verified through experimentation and simulation. The module was validated outdoors for 572 sun·hrs, and achieved a maximum thermal receiver temperature of 180 °C. 86.1% of incident solar power is collected at 166 suns average concentration collectively among the electrical, cooling, and thermal receiver subsystems. The remaining 13.9% is lost to mirror reflectivity, dish shadowing, receiver reflection, and thermal losses. The ability to directly cool the cells with an inert silicone oil offers the potential for reduced system cost relative to previous transmissive hybrid concentrator photovoltaic-thermal systems, including microfluidic-cooled designs. This solar cogeneration capability is valuable in a wide range of commercial and industrial applications.

14 SOLAR ENERGY↗

CK2 activity is modulated by growth rate in Saccharomyces cerevisiae

Research highlights: {yields} CK2 subunits are nuclear both in glucose and in ethanol growing yeast cells. {yields} CK2 activity is modulated in S. cerevisiae. {yields} CK2 activity is higher in conditions supporting higher growth rates. {yields} V{sub max} is higher in faster growing cells, while K{sub m} is not affected. -- Abstract: CK2 is a highly conserved protein kinase controlling different cellular processes. It shows a higher activity in proliferating mammalian cells, in various types of cancer cell lines and tumors. The findings presented herein provide the first evidence of an in vivo modulation of CK2 activity, dependent on growth rate, in Saccharomyces cerevisiae. In fact, CK2 activity, assayed on nuclear extracts, is shown to increase in exponential growing batch cultures at faster growth rate, while localization of catalytic and regulatory subunits is not nutritionally modulated. Differences in intracellular CK2 activity of glucose- and ethanol-grown cells appear to depend on both increase in molecule number and k{sub cat}. Also in chemostat cultures nuclear CK2 activity is higher in faster growing cells providing the first unequivocal demonstration that growth rate itself can affect CK2 activity in a eukaryotic organism.

60 APPLIED LIFE SCIENCES↗

WNT/β-catenin pathway modulates the TNF-α-induced inflammatory response in bronchial epithelial cells

In this study, TNF-α was found to activate the WNT/β-catenin pathway in BEAS-2B human bronchial epithelial cells. Levels of phospho-LRP6, Dvl-2, and phospho-GSK-3β were elevated, while that of Axin was reduced by TNF-α treatment. Nuclear translocation of β-catenin and the reporter activity of a β-catenin-responsive promoter were increased by TNF-α treatment. Under the same experimental conditions, TNF-α activated the NF-κB signaling, which includes the phosphorylation and degradation of IκB and nuclear translocation and target DNA binding of NF-κB, and it was found that an inhibitor of NF-κB activation, JSH-23, inhibited TNF-α-induced Wnt signaling as well as NF-κB signaling. It was also found that recombinant Wnt proteins induced NF-κB nuclear translocations and its target DNA binding, suggesting that Wnt signaling and NF-κB signaling were inter-connected. TNF-α-induced modulations of IκB and NF-κB as well as pro-inflammatory cytokine expression were significantly suppressed by the transfection of β-catenin siRNA compared to that of control siRNA. Transfection of a β-catenin expression plasmid augmented the TNF-α-induced modulations of IκB and NF-κB as well as pro-inflammatory cytokine expression. These results clearly demonstrated that the WNT/β-catenin pathway modulates the inflammatory response induced by TNF-α, suggesting that this pathway may be a useful target for the effective treatment of bronchial inflammation. - Highlights: • TNF-α activated the WNT/β-catenin pathway in bronchial epithelial cells. • TNF-α-induced WNT/β-catenin pathway was inhibited by NF-κB inhibitor. • Wnt proteins induced nuclear translocation and target DNA binding of NF-κB. • TNF-α-induced NF-κB signaling was suppressed by β-catenin knock-down. • TNF-α-induced NF-κB signaling was augmented by ectopic β-catenin expression.

60 APPLIED LIFE SCIENCES↗

High-efficiency perovskite photovoltaic modules achieved via cesium doping

Perovskite solar modules have been attracting increasing attention due to their market potential, yet publications concerned with theintrinsic scale-up potential of different perovskite compositions remain relatively scarce. On the other hand, while great success is being made towards improving the power conversion efficiency (PCE) of perovskite solar cells (PSCs) by cesium cation (Cs + ) doping of the perovskite, more attention is being paid to the perovskite phase stabilization effect of Cs + doping, and less to other properties that are critical to understand and futher improve the PSC's. In this work, moderately-Cs-doped MAPbI 3 was employed as a model perovskite material in order to exclude the phase stabilization effect. Our systematic study revealed the influence of Cs + in organic-inorganic hybrid perovskites on the crystal structure, crystallization process, trap state density, band structure and charge (i.e., ions or photo-carriers) transport. Markedly, it has been observed that Cs + doping can greatly increase the carrier diffusion length in the perovskite films, thus improving the potential to scale-up PSC's.The PCE of small area devices (0.09 cm 2 ) was increased to 21.72% from 19.73%, with decreased hysteresis behavior and increased operational stability (T85 = 1000 h) after Cs + doped, where T85 refers to the retention of 85% of the initial PCE. Moreover, a PCE of 21.08% was obtained for a Cs + -containing perovskite module with an active area > 30 cm 2 , which demonstrates a better "reproducibility" than the reference sample (MAPbI3-based perovskite modules, PCE = 18.26%).

14 SOLAR ENERGY↗

The role of binding modules in enzymatic poly(ethylene terephthalate) hydrolysis at high-solids loadings

In nature, enzymes that deconstruct biological polymers, such as cellulose and chitin, often exhibit multi-domain architectures, comprising a catalytic domain and a non-catalytic binding module; the latter serves to increase the enzyme concentration at the substrate surface. This multi-domain architecture has been shown to improve the hydrolysis of poly(ethylene terephthalate) (PET) using engineered cutinase enzymes. Here, we examine the role of accessory binding modules at industrially relevant PET solids loadings necessary for cost-effective enzymatic recycling. Using a thermostable variant of leaf compost cutinase (LCC), we produced synthetic fusion constructs of LCC with five type A carbohydrate-binding modules (CBMs). At solids loadings below 10 wt%, the CBMs improve aromatic monomer yield from PET, but above this threshold, conversion extents up to 97% are reached with no added benefits from the presence of CBM fusions. This suggests that fusion constructs with the herein studied CBMs are not necessary for industrial enzymatic PET recycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluating the causes of cost reduction in photovoltaic modules

Photovoltaic (PV) module costs have declined rapidly over forty years but the reasons remain elusive. Here we advance a conceptual framework and quantitative method for quantifying the causes of cost changes in a technology, and apply it to PV modules. Our method begins with a cost model that breaks down cost into variables that changed over time. Cost change equations are then derived to quantify each variable's contribution. We distinguish between changes observed in variables of the cost model – which we term low-level mechanisms of cost reduction – and research and development, learning-by-doing, and scale economies, which we refer to as high-level mechanisms. We find that increased module efficiency was the leading low-level cause of cost reduction in 1980–2012, contributing almost 25% of the decline. Government-funded and private R&D was the most important high-level mechanism over this period. After 2001, however, scale economies became a more significant cause of cost reduction, approaching R&D in importance. Policies that stimulate market growth have played a key role in enabling PV's cost reduction, through privately-funded R&D and scale economies, and to a lesser extent learning-by-doing. The method presented here can be adapted to retrospectively or prospectively study many technologies, and performance metrics besides cost.

14 SOLAR ENERGY↗

New features of the ECH control system on DIII-D and impact of power modulation on collector loading

In order to increase the reliability and improve the availability of electron cyclotron heating (ECH) and current drive during a plasma shot, an adaptive gyrotron command generator has been designed and implemented in all gyrotron systems on the DIII-D tokamak. This adaptive real-time generator is able to detect imminent faults, including gyrotron body overcurrent faults that can develop in a few microseconds, block faults, and restart RF generation within 10–30 ms, faster than the DIII-D energy confinement time. The adoption of this adaptive generator has substantially improved the performance of a depressed-collector gyrotron with recurrent body current faults, and has assisted the ECH system to achieve a record reliability of 95% during the last experimental campaign. The impact of power modulation on the collector loading of a depressed-collector gyrotron has been experimentally studied using calorimetry and collector maps taken by a diagnostic developed in-house. While lowering the modulation duty cycle kept the collector power constant as a result of low beam-wave efficiency during the modulation low state, an observed power redistribution inside the collector increased the peak collector power density, which reached levels above the manufacturer power density limit for low duty cycles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of intelligent control module for the J-TEXT electron cyclotron emission imaging system

An Electron Cyclotron Emission Imaging (ECEI) system has been developed on the J-TEXT tokamak and employed for the multi-dimensional electron temperature fluctuation imaging measurement in 2019 campaign. The intelligent control module has been developed and been used to flexibly setup the 256-channel ECEI system configurations for different plasma scenarios. The adjustments of key parameters are merged in this module including size and position of the geometric observation window, and the dynamic range of the signal and image resolution. The user-friendly interface is also developed for the tokamak operator to set the ECEI system focusing on physics interested region. Furthermore, this module is installed close to the diagnostic system around the J-TEXT tokamak, which can be remotely controlled by authorized operators in the control room. It significantly improves ECEI flexibility and stability, and also keeps the operation technician away from the harsh radiation environment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modulation and splitting of three-body radiative heat flux via graphene/SiC core-shell nanoparticles

Here, we theoretically demonstrate the modulation and splitting of radiative heat flux in a three-body system consisting of graphene/SiC core-shell (GSCS) nanoparticles on the basis of their highly tunable polarizabilities, which play a dominant role in the coupling of localized surface resonance. The excitation of multiple photon tunneling modes enables the radiative heat transfer to be controlled in different scenarios. Using the dependence of photon tunneling on the Fermi level and radius of the intermediate GSCS nanoparticle, such a many-body system not only holds the potential to be a near-field thermal modulator with a thermal modulation ratio greater than 40, but also allows the heat splitting effect with the ratio over 99 when the intermediate particle becomes the hot source. This work may facilitate dynamical thermal management in a many-body system, and can also benefit the plasmonics community in the near future.

42 ENGINEERING↗

Multilevel peel-off patterning of a prototype semitransparent organic photovoltaic module

Semitransparent organic photovoltaics (ST-OPVs) with applications to power generating windows have shown substantial increases in power conversion efficiency (PCE) and average photopic transmission (APT) at the laboratory scale. Here, the demonstration of similarly efficient, large-scale ST-OPV modules with geometric fill factors (GFF) approaching 100%, however, remains a challenge. Here, we employ a multilevel peel-off patterning method that can achieve micron-scale resolution without exposing chemically sensitive organic materials to solvents. Eight, 4 cm × 0.4 cm cells are connected in series to realize a prototype ST-OPV module with GFF = 95.8%, with PCE = 7.3 ± 0.2% under simulated AM 1.5G illumination at 1 sun intensity, APT = 41.8 ± 1.4%, and a light utilization efficiency of LUE = 3.1 ± 0.1%. A neutral color STOPV module is also demonstrated with 1.7 ± 0.1% and International Commission on Illumination (CIE) LAB coordinates of (L*, a*, b*) = (53.7, -1.9, -3.9).

14 SOLAR ENERGY↗

Photon optimizer (PO) vs progressive resolution optimizer (PRO): a conformality- and complexity-based comparison for intensity-modulated arc therapy plans

This study aimed to provide guidance on the advantages and limitations of a new optimizer, “photon optimizer” (PO), when compared with its predecessor, “progressive resolution optimizer” (PRO), for intensity-modulated arc therapy (IMAT) plans. Eleven study plans that included a cohort of prostate, head and neck, and brain treatment sites were optimized using both PRO and PO algorithms. A plan template using the same objectives for the same number of iterations was used for each optimized plan to obtain hypothetical treatment plans that would be comparable with a clinical plan. Analysis was performed using plan conformity-based parameters such as target volume coverage factor, conformation number and homogeneity indices, and plan complexity assessment parameters such as small aperture score, modulation indices, and monitor unit variation with arc angle for prostate, brain and head, and neck IMAT treatment plans. Plan conformality analysis demonstrated that conformation numbers, target volume coverage factors, and homogeneity indices produced by the 2 optimizers were comparable for most anatomic sites. IMAT treatment plans produced using the PRO optimizer were found to be less complex than plans produced using the PO optimizer, in terms of multileaf collimator (MLC) leaf position variability and modulation complexity scores. Similarly, the PRO optimizer was shown to produce treatment plans that used fewer monitor units (and generally fewer monitor unit per degree of arc rotation) than PO optimizer. This study demonstrated that the PO optimizer can produce IMAT treatment plans with a similar degree of dose conformity to the target volume and generally improved organ at risk sparing, compared with the PRO optimizer. Better coverage to organs at risk produced by plans optimized using PO was observed to have higher MLC variability and monitor units. Therefore, careful evaluation of treatment plan conformity and complexity before assessing its deliverability is recommended when implementing the routine use of PO optimizer.

61 RADIATION PROTECTION AND DOSIMETRY↗

The incommensurate modulation of tetragonal tungsten bronze quantified by high resolution 4D STEM

Many members of the tetragonal tungsten bronze (TTB) family of oxides display an incommensurate periodic lattice distortion, the nature of which has been the subject of some controversy. Here we present a study of this structural modulation in the relaxor ferroelectric Ba 5 SmSn 3 Nb 7 O 30 (BSSN) by quantitative scanning transmission electron microscopy (STEM). Additionally, we characterize the modulation in BSSN by employing a fast, pixelated direct electron detector to perform high resolution phase contrast STEM imaging of the crystalline lattice. By quantitatively analyzing the images, we visualize the atomic structural correlations present in the material on both the cation and anion sublattices. This analysis reveals the incommensurate structure to have an octahedral tilting pattern and cooperative A2 site cation displacements, analogous to an Ama2 commensurate cell. Finally, we show that the modulation is composed of a structural motif with a period of 3 x $d_{1\bar{1}0}$ and modified by discommensurations, likely arise from frustrated octahedral tilting in the odd-valued periodicity.

Differential phase contrast↗

A new technique for luminosity measurement using 3D pixel modules in the ATLAS IBL detector

The Insertable B-Layer (IBL) is the innermost layer of the ATLAS tracking system. It consists of planar pixel modules in the central region and 3D pixel modules at the two extremities. We use the longitudinal cluster-size distributions in 3D modules of the IBL to determine the number of pixel clusters per bunch crossing produced by primary charged particles in randomly triggered collision events, and to suppress the associated backgrounds. This Pixel-Cluster-Counting algorithm can provide both bunch-integrated and bunch-by-bunch relative-luminosity measurements, and thereby contribute independent constraints to the understanding and the evaluation of the systematic uncertainties that dominate the luminosity determination at the ATLAS experiment.

3D Pixel Module↗

Waved glass: Towards optimal light distribution on solar cell surfaces for high efficient modules

A method to improve the module efficiency of solar cells by modifying the surface of the glass cover of the solar cells module is proposed. A model is built to show that a better efficiency can be achieved by optimizing the light distribution on the cell, which reduces the shadow losses and thereby allows the finger spacing to be decreased, which in turn decreases the (resistive) ohmic losses. This method is illustrated by considering industrial crystalline silicon solar cells as an example, however, it applies to all solar cells that are characterized by a metallization pattern on the surface of the solar cell. It is estimated that this method can improve the relative module efficiency by about 5% and halve the front side losses. (author)

14 SOLAR ENERGY↗

Modulation of miR-203 and its regulators as a function of time during the development of 7, 12 dimethylbenz [a] anthracene induced mouse skin tumors in presence or absence of the antitumor agents

We investigated the chemopreventive effects of naturally occurring compounds like butyric acid (BA), nicotinamide (NA) and calcium glucarate (CAG) individually or in combination in 7, 12-dimethylbenz [a] anthracene (DMBA) treated mouse skin at 4 and 16 weeks, the time before and after the tumor development. DMBA application did not show any skin tumors at 4 weeks but well defined tumors appeared at 16 weeks. BA, NA or CAG prevented the tumor development significantly but the protection was highly enhanced when all these compounds were given together. In order to see the molecular changes progressing with tumors, we showed the downregulation of tumor suppressor miR-203 at 16 weeks and upregulation of histone deacetylases (HDAC), DNA methyltransferase, promoter methylation of miR-203 at 4 or 16 weeks. Regulators of micro RNA biogenesis such as DICER1 and Ago2 were also deregulated by DMBA. Proto-oncogene c-myc and BMI1 were upregulated and tumor suppressor gene p16 was downregulated by DMBA as a function of time. Effects of BA, NA or CAG were more pronounced after 16 weeks as compared to 4 weeks in preventing the tumor development and altered gene expression. Concomitant administration of BA, NA and CAG tried to prevent these alterations more effectively than that of individual compound possibly by regulating miR-203 status through epigenetic or biogenetic modulations before and after the tumor development. Study provides a rationale for chemoprevention by combination of different compounds targeting miR-203. - Highlights: • DMBA modulates miR-203 and its regulator before and after the onset of tumors. • Suppression of miR-203 and p16 could be the result of gene promoter methylation. • BA, NA or CAG prevents the effects of DMBA. • Combination of BA, NA or CAG is more effective in preventing the DMBA modulations.

60 APPLIED LIFE SCIENCES↗