Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fracture simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Self-generated concentration and modulus gradient coating design to protect Si nano-wire electrodes during lithiation

Surface coatings as artificial solid electrolyte interphases have been actively pursued as an effective way to improve the cycle efficiency of nanostructured Si electrodes for high energy density lithium ion batteries, where the mechanical stability of the surface coatings on Si is as critical as Si itself. However, the chemical composition and mechanical property change of coating materials during the lithiation and delithiation process imposed a grand challenge to design coating/Si nanostructure as an integrated electrode system. In our work, we first developed reactive force field (ReaxFF) parameters for Li–Si–Al–O materials to simulate the lithiation process of Si-core/Al 2 O 3 -shell and Si-core/SiO 2 -shell nanostructures. With reactive dynamics simulations, we were able to simultaneously track and correlate the lithiation rate, compositional change, mechanical property evolution, stress distributions, and fracture. A new mechanics model based on these varying properties was developed to determine how to stabilize the coating with a critical size ratio. Furthermore, we discovered that the self-accelerating Li diffusion in Al 2 O 3 coating forms a well-defined Li concentration gradient, leading to an elastic modulus gradient, which effectively avoids local stress concentration and mitigates crack propagation. Finally, based on these results, we propose a modulus gradient coating, softer outside, harder inside, as the most efficient coating to protect the Si electrode surface and improve its current efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ imaging during compression of plastic bonded explosives for damage modeling

Here, the microstructure of plastic bonded explosives (PBXs) is known to influence behavior during mechanical deformation, but characterizing the microstructure can be challenging. For example, the explosive crystals and binder in formulations such as PBX 9501 do not have sufficient X-ray contrast to obtain three-dimensional data by in situ, absorption contrast imaging. To address this difficulty, we have formulated a series of PBXs using octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) crystals and low-density binder systems. The binders were hydroxyl-terminated polybutadiene (HTPB) or glycidyl azide polymer (GAP) cured with a commercial blend of acrylic monomers/oligomers. The binder density is approximately half of the HMX, allowing for excellent contrast using in situ X-ray computed tomography (CT) imaging. The samples were imaged during unaxial compression using micro-scale CT in an interrupted in situ modality. The rigidity of the binder was observed to significantly influence fracture, crystal-binder delamination, and flow. Additionally, 2D slices from the segmented 3D images were meshed for finite element simulation of the mesoscale response. At low stiffness, the binder and crystal do not delaminate and the crystals move with the material flow; at high stiffness, marked delamination is noted between the crystals and the binder, leading to very different mechanical properties. Initial model results exhibit qualitatively similar delamination.

36 MATERIALS SCIENCE↗

Probabilistic Multi-Scale, Multi-Level, Multi-Disciplinary Analysis and Optimization of Engine Structures

Aircraft engines are assemblies of dynamically interacting components. Engine updates to keep present aircraft flying safely and engines for new aircraft are progressively required to operate in more demanding technological and environmental requirements. Designs to effectively meet those requirements are necessarily collections of multi-scale, multi-level, multi-disciplinary analysis and optimization methods and probabilistic methods are necessary to quantify respective uncertainties. These types of methods are the only ones that can formally evaluate advanced composite designs which satisfy those progressively demanding requirements while assuring minimum cost, maximum reliability and maximum durability. Recent research activities at NASA Glenn Research Center have focused on developing multi-scale, multi-level, multidisciplinary analysis and optimization methods. Multi-scale refers to formal methods which describe complex material behavior metal or composite; multi-level refers to integration of participating disciplines to describe a structural response at the scale of interest; multidisciplinary refers to open-ended for various existing and yet to be developed discipline constructs required to formally predict/describe a structural response in engine operating environments. For example, these include but are not limited to: multi-factor models for material behavior, multi-scale composite mechanics, general purpose structural analysis, progressive structural fracture for evaluating durability and integrity, noise and acoustic fatigue, emission requirements, hot fluid mechanics, heat-transfer and probabilistic simulations. Many of these, as well as others, are encompassed in an integrated computer code identified as Engine Structures Technology Benefits Estimator (EST/BEST) or Multi-faceted/Engine Structures Optimization (MP/ESTOP). The discipline modules integrated in MP/ESTOP include: engine cycle (thermodynamics), engine weights, internal fluid mechanics, cost, mission and coupled structural/thermal, various composite property simulators and probabilistic methods to evaluate uncertainty effects (scatter ranges) in all the design parameters. The objective of the proposed paper is to briefly describe a multi-faceted design analysis and optimization capability for coupled multi-discipline engine structures optimization. Results are presented for engine and aircraft type metrics to illustrate the versatility of that capability. Results are also presented for reliability, noise and fatigue to illustrate its inclusiveness. For example, replacing metal rotors with composites reduces the engine weight by 20 percent, 15 percent noise reduction, and an order of magnitude improvement in reliability. Composite designs exist to increase fatigue life by at least two orders of magnitude compared to state-of-the-art metals.

Chamis, Christos C.↗

Development of Advanced Life Prediction Tools for Elastic-Plastic Fatigue Crack Growth

The objective of this viewgraph presentation is to develop a systematic approach to improving the fracture control process, including analytical tools, standards, guidelines, and awareness. Analytical tools specifically for elastic-plastic fracture analysis is a regime that is currently empirical for the Space Shuttle External Tank (ET) and is handled by simulated service testing of pre-cracked panels.

Gregg, Wayne↗

Simulation of Delamination Under High Cycle Fatigue in Composite Materials Using Cohesive Models

A new thermodynamically consistent damage model is proposed for the simulation of high-cycle fatigue crack growth. The basis for the formulation is an interfacial degradation law that links Fracture Mechanics and Damage Mechanics to relate the evolution of the damage variable, d, with the crack growth rate da/dN. The damage state is a function of the loading conditions (R and (Delta)G) as well as the experimentally-determined crack growth rates for the material. The formulation ensures that the experimental results can be reproduced by the analysis without the need of additional adjustment parameters.

Camanho, Pedro P.↗

Peridynamic modeling of fracture in elastomers and composites.

The peridynamic model of solid mechanics is a mathematical theory designed to provide consistent mathematical treatment of deformations involving discontinuities, especially cracks. Unlike the partial differential equations (PDEs) of the standard theory, the fundamental equations of the peridynamic theory remain applicable on singularities such as crack surfaces and tips. These basic relations are integro-differential equations that do not require the existence of spatial derivatives of the deformation, or even continuity of the deformation. In the peridynamic theory, material points in a continuous body separated from each other by finite distances can interact directly through force densities. The interaction between each pair of points is called a bond. The dependence of the force density in a bond on the deformation provides the constitutive model for a material. By allowing the force density in a bond to depend on the deformation of other nearby bonds, as well as its own deformation, a wide spectrum of material response can be modelled. Damage is included in the constitutive model through the irreversible breakage of bonds according to some criterion. This criterion determines the critical energy release rate for a peridynamic material. In this talk, we present a general discussion of the peridynamic method and recent progress in its application to penetration and fracture in nonlinearly elastic solids. Constitutive models are presented for rubbery materials, including damage evolution laws. The deformation near a crack tip is discussed and compared with results from the standard theory. Examples demonstrating the spontaneous nucleation and growth of cracks are presented. It is also shown how the method can be applied to anisotropic media, including fiber reinforced composites. Examples show prediction of impact damage in composites and comparison against experimental measurements of damage and delamination.

36 MATERIALS SCIENCE↗

Multiscale Modeling of Cr 2 O 3 -doped UO 2 Creep and Fracture (Rev.1)

The pursuit of UO 2 fuel with various dopants (e.g., Cr 2 O 3 and Al 2 O 3 ) for improved accident tolerance due to larger grain sizes and suspected reductions in fission gas release and creep requires advanced modeling and simulation tools. Such tools enable rapid multiscale development and enhanced understanding of material behavior in regimes for which experimental measurements may be lacking. This work builds on previous multiscale modeling efforts targeting the fission gas behavior of Cr 2 O 3 -doped UO 2 , in order to begin exploring the effects of dopants on mechanical properties, with a particular focus on creep and fracture. The results indicate that dislocation climb is the most dominate creep mechanism at almost all temperatures, and sensitivity analyses provide evidence in further support of this claim. The limited experimental data generated by the U.S. Department of Energy’s Advanced Fuels Campaign (AFC) on the tensile strength of Cr 2 O 3 -doped UO 2 indicate that fracture may be less severe in doped specimens. The results on creep and fracture are preliminary, given the large degree of uncertainty associated with the models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Meso-Scale Fuel Performance Modeling using the MARMOT Code

The in-pile behavior of light-water-reactor (LWR) fuels is governed by the physics from various time and spatial scales. Accordingly, multi-scale modeling and simulation are needed to accurately predict the fuel performance at the engineering scale. To improve the traditional fuel performance modeling, the Department of Energy (DOE) Nuclear Energy Advanced Modeling and Simulation (NEAMS) program targets at developing multi-scale, multiphysics modeling tools for in-pile fuel behavior prediction under various operating or accident scenarios. In traditional fuel performance modeling, the history of fuel is represented by a single parameter, fuel burn-up. Burn-up measures the energy that has been extracted from fuels. However, it is not an adequate measure of fuel history as it ignores the flux effect, which is critical for the irradiation-induced microstructural evolution in fuels. Moreover, the traditional fuel performance models are usually fitted to experimental data. Their capabilities of being extrapolated to new operating conditions and being extended to new types of fuels are strongly limited by the empirical or semi-empirical nature. To improve the burn-up based models, a microstructure based fuel approach, the MOOSE-BISON-MARMOT (MBM) tool-kit, is being developed under the fuel product line (FPL) of the NEAMS program for predictive fuel performance modeling. In the MBM approach, the evolution of fuel microstructure and changes in fuel properties are described by the MARMOT code. The transient fuel properties obtained from MARMOT are then fed into the BISON code for engineering scale fuel performance modeling. Both BISON and MARMOT are developed within the MOOSE framework, which was developed at Idaho National Laboratory. In this summary, the development and the capabilities of the MARMOT code will be introduced. In the past few years, several materials models have been developed including: (1) a grain growth model that describes the grain size evolution as a function of time, temperature and fuel porosity, considering the effects of impurity and porosity dragging and anisotropic grain boundary energy, (2) a fission gas release model that describes the fission gas diffusion in grain interior, fission gas bubble formation in grain interior and at grain boundaries, and fission gas release to the fuel-cladding gap, (3) a fracture model that describes the fracture initiation and propagation in grain interior and along grain boundaries, and (4) a thermal conductivity model that describes the change in thermal conductivity due to grain growth, gas bubble formation, fracture and radiation damage. Several other models are also being developed in MARMOT for hydride formation in Zr-based cladding, radiation damage and grain size subdivision. In most cases, these materials models are coupled with each other. For instance, to accurate predict the transient thermal conductivity, information on grain size, fission gas density, porosity and fracture is required. Further development is on going to improve all these models. These models are developed primarily for UO{sub 2} fuels used in LWRs. They can be extended to other fuels with possibly new development. All models in MARMOT will be rigorously verified and validated before being applied for fuel performance modeling. A version of MARMOT was recently released in September 2015 with an assessment report. (authors)

36 MATERIALS SCIENCE↗

Self-Assembly of Silica Nanoparticles at Water–Hydrocarbon Interfaces: Insights from In Operando Small-Angle X-ray Scattering Measurements and Molecular Dynamics Simulations

To achieve tunable controls on the interactions of siliceous materials in subsurface environments bearing water and hydrocarbons, it is essential to determine the influence of hydrocarbon–water interfaces on the self-assembly of the silica particles. The hydrophilic silica particle have a tendency to aggregate on the water front of the interface. Self-assembly of silica nanoparticles proceeds via the migration of these nanoparticles to the water–hydrocarbon interface followed by aggregation at the interface. Fractal-like morphologies of assembled silica nanoparticles at water–hydrocarbon interfaces are observed. Rapid assembly of the hydrophilic silica nanoparticles at water–hydrocarbon interfaces corresponds to an overall reduction in the surface tension of water–toluene and water–heptane systems. These studies demonstrate the silica aggregation that is the precursor of silica polymerization, or nucleation and growth is influenced by the presence of hydrocarbons in subsurface geologic environments. These insights were derived from in operando ultrasmall and small-angle X-ray scattering (USAXS/SAXS) measurements, cryo-scanning electron microscopy (Cryo-SEM) imaging, and classical molecular dynamics simulations. As a result, these studies are intended to inform current and future efforts aimed at tuning silica reactivity in subsurface geologic environments to enhance permeability, the design and use of silica-based proppants to enhance fractures, and the development of effective strategies to control silica-based scaling behavior in subsurface reservoirs.

42 ENGINEERING↗

Simulation and analysis of Magnetically-Applied Pressure-Shear (MAPS) experiments.

A new experimental technique to measure material shear strength at high pressures has been developed for use on magnetohydrodynamic (MHD) drive pulsed power platforms. The technique is referred to as Magnetically-Applied Pressure-Shear (MAPS). By applying an external static magnetic field to the sample region, the MHD drive directly induces a shear stress wave in addition to the usual longitudinal stress wave. Strength is probed by passing this shear wave through a sample material where the transmissible shear stress is limited to the sample strength. The magnitude of the transmitted shear wave is measured via a transverse velocity interferometry system (VISAR) from which the sample strength is determined. The strength of materials is defined as the ability of a material to sustain deviatoric (shear) stresses. Strength is an important aspect of the response of materials subjected to compression to high pressure. Beyond the elastic response, material strength will govern at what pressure and to what extent a material will plastically deform. The MAPS technique cleverly exploits the property that, for a von Mises yield criterion at a given longitudinal stress, the maximum amplitude shear wave that can be transmitted is limited by the strength at that stress level. Successful fielding of MAPS experiments to measure shear stresses relies upon correct numerical simulation of the experiment. Complex wave interactions among forward and reflected longitudinal and shear waves, as well as the advancing magnetic diffusion front of the MHD drive, can make the design of the experiment complicated. Careful consideration must be given to driver, sample, and anvil materials; to the thicknesses of the driver, sample and anvil layers; as well as to the timing of the interacting waves. This paper will present and analyze the 2D MHD simulations used to design the MAPS experiments. The MAPS experiments are modeled using Sandia's ALEGRA-MHD simulation code. ALEGRA-MHD is an operator-split, multi-physics, multi-material, arbitrary lagrangian-eulerian code developed to model magnetic implosion, ceramic fracture, and electromagnetic launch. We will detail the numerical investigations into MHD shear generation, longitudinal and shear stress coupling, timing of wave interactions, and transmission of shear at material interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effectiveness of supercritical-CO 2 and N 2 huff-and-puff methods of enhanced oil recovery in shale fracture networks using microfluidic experiments

Current oil recovery methods in hydraulically fractured shale reservoirs have a low recovery efficiency of about 10%. The objective of this work is to investigate the effectiveness of nitrogen and supercritical carbon dioxide in the huff-and-puff method for enhanced oil recovery as a means to re-energize reservoirs and improve recovery rates. Here, we conduct direct visualization experiments with a microfluidic system to reveal the mechanisms and to quantify the recovery rates of oil from fracture networks. We compared the effectiveness of water, nitrogen and supercritical carbon dioxide at reservoir conditions in a process mimicking the huff-and-puff method in both dead-end and connected fracture systems. The microfluidic chips were made of glass and placed in a confining pressure system pressurized to 10 MPa, 50 °C. The system was allowed to equilibrate, and then depressurized to simulate huff-and-puff oil recovery. Fluorescence microscope images were continuously taken to visualize and calculate residual oil saturation as a function of pressure drawdown. As the system was depressurized from 10 MPa, gas exsolution from the oil liquid phase, including bubble nucleation, growth, and coalescence, appeared to be the main driver for mobilizing oil from the fracture networks. Injection of supercritical CO 2 resulted in the highest recovery rate with an average end-point recovery of about 90% in the connected fracture network and 60% in the dead-end fracture network. N 2 has lower solubility in oil and hence showed a lower recovery rate of 40% in the connected fracture network and 25% in the dead-end fracture network. Injection of water had no effect on oil mobilization since water is insoluble, immiscible and incompressible. The main mechanism of enhanced recovery was gas exsolution from the liquid phase as pressure was decreased below the bubble point pressure. Because the gas was distributed throughout the oil phase, bubble nucleation, growth, coalescence, and elongation occurred throughout the fracture network. Expansion of the gas forced oil out of the network through piston displacement in continuous oil areas and film flow in the dispersed oil areas. Bubbles began as spheres and grew until they touched the fracture walls where they elongated along the fracture length. The bubble growth rate depended on local mass transfer from liquid to gas phase and gas volume expansion due to pressure drop. The efficiency of the huff-and-puff process is dependent on the solubility and miscibility of the injection fluid with oil. High gas solubility allows for more bubble nucleation, growth and expansion during the depressurization cycle.

58 GEOSCIENCES↗

Chlorite, Biotite, Illite, Muscovite and Feldspar Dissolution Kinetics at Variable pH and Temperatures up to 280 deg C

Chemical reactions pose an important but poorly understood threat to EGS long-term success because of their impact on fracture permeability. This report summarizes the dissolution rate equations for layered silicates where data were lacking for geothermal systems. Here we report updated rate laws for chlorite (Carroll and Smith 2013), biotite (Carroll and Smith, 2015), illite (Carroll and Smith, 2014), and for muscovite. Also included is a spreadsheet with rate data and rate equations for use in reactive transport simulators.

15 GEOTHERMAL ENERGY↗

Data-driven nonlocal model for fragmentation in the crushing of solids

A technique is proposed for reproducing particle size distributions in three-dimensional simulations of the crushing and comminution of solid materials. The method is designed to produce realistic distributions over a wide range of loading conditions, especially for small fragments. In contrast to most existing methods, the new model does not explicitly treat the small-scale process of fracture. Instead, it uses measured fragment distributions from laboratory tests as the basic material property that is incorporated into the algorithm, providing a data-driven approach. The algorithm is implemented within a nonlocal peridynamic solver, which simulates the underlying continuum mechanics and contact interactions between fragments after they are formed. Finally, the technique is illustrated in reproducing fragmentation data from drop weight testing on sandstone samples.

58 GEOSCIENCES↗

Measurements of Mode I Interlaminar Properties of Carbon Fiber Reinforced Polymers Using Digital Image Correlation

Numerical models based on cohesive zones are usually used to model and simulate the mechanical behavior of laminated carbon fiber reinforced polymers (CFRP) in automotive and aerospace applications and require different interlaminar properties. This work focuses on determining the interlaminar fracture toughness (G IC ) under Mode I loading of a double cantilever beam (DCB) specimen of unidirectional CFRP, serving as prototypical material. The novelty of this investigation is the improvement of the testing methodology by introducing digital image correlation (DIC) as an extensometer and this tool allows for crack growth measurement, phenomenological visualization and quantification of various material responses to Mode I loading. Multiple methodologies from different international standards and other common techniques are compared for the determination of the evolution of G IC as crack resistance curves (R-curves). The primarily metrological sources of uncertainty, in contrast to material specific related uncertainties, are discussed through a simple sensitivity analysis. Additionally, the current work offers a detailed insight into the constraints and assumptions to allow exploration of different methods for the determination of material properties using the DIC measured data. The main aim is an improvement of the measurement technique and an increase in the reliability of measured data during static testing, in advance of future rate dependent testing for crashworthiness simulations.

36 MATERIALS SCIENCE↗

Phase field modeling of crack propagation

Fracture is a fundamental mechanism of materials failure. Propagating cracks can exhibit a rich dynamical behavior controlled by a subtle interplay between microscopic failure processes in the crack tip region and macroscopic elasticity. We review recent approaches to understand crack dynamics using the phase field method. This method, developed originally for phase transformations, has the well-known advantage of avoiding explicit front tracking by making material interfaces spatially diffuse. In a fracture context, this method is able to capture both the short-scale physics of failure and macroscopic linear elasticity within a self-consistent set of equations that can be simulated on experimentally relevant length and time scales. Here, we discuss the relevance of different models, which stem from continuum field descriptions of brittle materials and crystals, to address questions concerning crack path selection and branching instabilities, as well as models that are based on mesoscale concepts for crack tip scale selection. Open questions which may be addressed using phase field models of fracture are summarized.

36 MATERIALS SCIENCE↗

Microstructure of Friction Stir Welded AlSi9Mg Cast with 5083 and 2017A Wrought Aluminum Alloys

Wrought aluminum alloys 5083 and 2017A were each joined with cast aluminum alloy AlSi9Mg through friction stir welding in butt weld configurations. For each material system, the wrought and cast alloy positions, i.e., the advancing side or the retreating side, were exchanged between welding trials. The produced weldments were free from cracks and discontinuities. For each alloy configuration, a well-defined nugget comprised of alternating bands of the welded alloys characterized the microstructure. The degree of mixing, however, strongly depended on which wrought alloy was present and on its position during processing. In all cases, the cast AlSi9Mg alloy dominated the weld center regardless of its position during welding. Electron backscattered diffraction analysis showed that the grain size in both alloys (bands) constituting the nugget was similar and that the majority of grain boundaries exhibited a high angle character (20°-60°). Regardless of the alloy, however, all grains were elongated along the direction of the material plastic flow during welding. A numerical simulation of the joining process visualized the material flow patterns and temperature distribution and helped to rationalize the microstructural observations. The hardness profiles across the weld reflected the microstructure formed during welding and correlated well with the temperature changes predicted by the numerical model. Tensile specimens consistently fractured in the cast alloy near the weld nugget.

36 MATERIALS SCIENCE↗

A multiscale multi-permeability poroplasticity model linked by recursive homogenizations and deep learning

Many geological materials, such as shale, mudstone, carbonate rock, limestone and rock salt are multi-porosity porous media in which pores of different scales may co-exist in the host matrix. When fractures propagate in these multi-porosity materials, these pores may enlarge and coalesce and therefore change the magnitude and the principal directions of the effective permeability tensors. The pore-fluid inside the cracks and the pores of host matrix may interact and exchange fluid mass, but the difference in hydraulic properties of these pores often means that a single homogenized effective permeability tensor field is insufficient to characterize the evolving hydraulic properties of these materials at smaller time scale. Furthermore, the complexity of the hydro-mechanical coupling process and the induced mechanical and hydraulic anisotropy originated from the micro-fracture and plasticity at grain scale also makes it difficult to propose, implement and validate separated macroscopic constitutive laws for numerical simulations. Here this article presents a hybrid data-driven method designed to capture the multiscale hydro-mechanical coupling effect of porous media with pores of various different sizes. At each scale, data-driven models generated from supervised machine learning are hybridized with classical constitutive laws in a directed graph that represents the numerical models. By using sub-scale simulations to generate database to train material models, an offline homogenization procedure is used to replace the up-scaling procedure to generate cohesive laws for localized physical discontinuities at both grain and specimen scales. Through a proper homogenization procedure that preserves spatial length scales, the proposed method enables field-scale simulations to gather insights from meso-scale and grain-scale micro-structural attributes. This method is proven to be much more computationally efficient than the classical DEM–FEM or FEM2 approach while at the same time more robust and flexible than the classical surrogate modeling approach. Due to the usage of bridging-scale technique, the proposed model may provide multiple opportunities to incorporate different types of simulations and experimental data across different length scales for machine learning. Numerical issues will also be discussed.

42 ENGINEERING↗

In-situ imaging of flexure-induced fracture in tape-laminate composites using high-resolution X-ray computed tomography

Here, this study presents development of an in-situ flexure test for imaging progressive inter- and intralaminar fracture in tape-laminate composites using X-ray computed tomography (CT). The intent of this test is to provide detailed experimental observations of ply-level damage that can be used to validate existing, and develop new, progressive damage analysis (PDA) tools. The test consists of a vertically mounted specimen which is flexed using two eccentric compressive loads using an in-situ uniaxial load stage. The flexure specimen contains a starter notch mid-span which promotes initiation of composite failure within the X-ray field of view. Specimens with two different laminate stacking sequences were tested, imaged, analyzed. For a quasi-isotropic laminate with large angle changes between adjacent plies, there was near simultaneous growth of transverse cracks and delaminations below the midplane of the laminate. For a laminate with small angles between adjacent plies, there was extensive formation of transverse crack networks which penetrated the laminate thickness without delamination growth. In addition to imaging fracture, the X-ray CT data from both specimen types were used to quantify the variability in thickness and analyze the local orientation of individual plies. Overall, the proposed test and the image-data analysis methodology provided an important insight into the fracture processes in tape laminates and highlights the inherent ply-level geometrical variabilities that should be accounted for in PDA simulations.

42 ENGINEERING↗