Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fire modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Large Eddy/Reynolds-Averaged Navier-Stokes Simulations of CUBRC Base Heating Experiments

ven with great advances in computational techniques and computing power during recent decades, the modeling of unsteady separated flows, such as those encountered in the wake of a re-entry vehicle, continues to be one of the most challenging problems in CFD. Of most interest to the aerothermodynamics community is accurately predicting transient heating loads on the base of a blunt body, which would result in reduced uncertainties and safety margins when designing a re-entry vehicle. However, the prediction of heat transfer can vary widely depending on the turbulence model employed. Therefore, selecting a turbulence model which realistically captures as much of the flow physics as possible will result in improved results. Reynolds Averaged Navier Stokes (RANS) models have become increasingly popular due to their good performance with attached flows, and the relatively quick turnaround time to obtain results. However, RANS methods cannot accurately simulate unsteady separated wake flows, and running direct numerical simulation (DNS) on such complex flows is currently too computationally expensive. Large Eddy Simulation (LES) techniques allow for the computation of the large eddies, which contain most of the Reynolds stress, while modeling the smaller (subgrid) eddies. This results in models which are more computationally expensive than RANS methods, but not as prohibitive as DNS. By complimenting an LES approach with a RANS model, a hybrid LES/RANS method resolves the larger turbulent scales away from surfaces with LES, and switches to a RANS model inside boundary layers. As pointed out by Bertin et al., this type of hybrid approach has shown a lot of promise for predicting turbulent flows, but work is needed to verify that these models work well in hypersonic flows. The very limited amounts of flight and experimental data available presents an additional challenge for researchers. Recently, a joint study by NASA and CUBRC has focused on collecting heat transfer data on the backshell of a scaled model of the Orion Multi-Purpose Crew Vehicle (MPCV). Heat augmentation effects due to the presence of cavities and RCS jet firings were also investigated. The high quality data produced by this effort presents a new set of data which can be used to assess the performance of CFD methods. In this work, a hybrid LES/RANS model developed at North Carolina State University (NCSU) is used to simulate several runs from these experiments, and evaluate the performance of high fidelity methods as compared to more typical RANS models. .

Salazar, Giovanni↗

Early retirement of power plants in climate mitigation scenarios

International efforts to avoid dangerous climate change aim for large and rapid reductions of fossil fuel CO 2 emissions worldwide, including nearly complete decarbonization of the electric power sector. However, achieving such rapid reductions may depend on early retirement of coal- and natural gas-fired power plants. Here, we analyze future fossil fuel electricity demand in 171 energy-emissions scenarios from Integrated Assessment Models (IAMs), evaluating the implicit retirements and/or reduced operation of generating infrastructure. Although IAMs calculate retirements endogenously, the structure and methods of each model differ; we use a standard approach to infer retirements in outputs from all six major IAMs and—unlike the IAMs themselves—we begin with the age distribution and region-specific operating capacities of the existing power fleet. We find that coal-fired power plants in scenarios consistent with international climate targets (i.e. keeping global warming well-below 2 °C or 1.5 °C) retire one to three decades earlier than historically has been the case. If plants are built to meet projected fossil electricity demand and instead allowed to operate at the level and over the lifetimes they have historically, the roughly 200 Gt CO 2 of additional emissions this century would be incompatible with keeping global warming well-below 2 °C. Thus, ambitious climate mitigation scenarios entail drastic, and perhaps un-appreciated, changes in the operating and/or retirement schedules of power infrastructure.

20 FOSSIL-FUELED POWER PLANTS↗

Statistical Modeling of Landscape Pattern and the Effects of Coarse Spatial Resolution

Analysis of classified satellite imagery was conducted to characterize errors in estimates of area based on coarse resolution satellite imagery which are due to distortions in sizes of small fragments, and to explore the feasibility of correcting for these errors using a statistical modeling approach. Sizes of bodies of open water on European Remote-Sensing (ERS-1) synthetic aperture radar (SAR) and fire scars on Landsat Multispectral Scanner (MSS) imagery were measured using geographic information system (GIS) software. Statistical analysis of the smaller scars and ponds as observed with this imagery of relatively fine resolution demonstrated that the distribution of the sizes could be modeled by either of two types of statistical distributions-a power distribution related to fractal processes or a simple exponential distribution. A comparison of the size distribution of small burn scars as observed with Landsat with the distribution observed with the much coarser Advanced Very High Resolution Radiometer (AVHRR) imagery revealed effects of coarse resolution, each of which were associated with a particular size range, and whose net effect accounted for the bias in total burn area due to coarse spatial resolution. Size dependent area correction procedures are therefore feasible. A statistical modeling approach to area estimation, based models of the underlying and observed size distributions of fragments in the scene, may lead to a procedure which requires little or no ancillary data.

Hlavka, C. A.↗

An Inventory of AI-ready Benchmark Data for US Fires, Heatwaves, and Droughts

Extreme weather events, including fires, heatwaves, and droughts, have significant impacts on earth, environmental, and energy systems. Mechanistic and predictive understanding, as well as probabilistic risk assessment of these extreme weather events, are crucial for detecting, planning for, and responding to these extremes. Records of extreme weather events provide an important data source for understanding present and future extremes, but the existing data needs preprocessing before it can be used for analysis. Moreover, there are many nonstandard metrics defining the levels of severity or impacts of extremes. In this study, we compile a comprehensive benchmark data inventory of extreme weather events, including fires, heatwaves, and droughts. The dataset covers the period from 2001 to 2020 with a daily temporal resolution and a spatial resolution of 0.5°×0.5° (~55km×55km) over the continental United States (CONUS), and a spatial resolution of 1km × 1km over the Pacific Northwest (PNW) region, together with the co-located and relevant meteorological variables. By exploring and summarizing the spatial and temporal patterns of these extremes in various forms of marginal, conditional, and joint probability distributions, we gain a better understanding of the characteristics of climate extremes. The resulting AI/ML-ready data products can be readily applied to ML-based research, fostering and encouraging AI/ML research in the field of extreme weather. This study can contribute significantly to the advancement of extreme weather research, aiding researchers, policymakers, and practitioners in developing improved preparedness and response strategies to protect communities and ecosystems from the adverse impacts of extreme weather events. Usage Notes We presented a long term (2001-2020) and comprehensive data inventory of historical extreme events with daily temporal resolution covering the separate spatial extents of CONUS (0.5°×0.5°) and PNW(1km×1km) for various applications and studies. The dataset with 0.5°×0.5° resolution for CONUS can be used to help build more accurate climate models for the entire CONUS, which can help in understanding long-term climate trends, including changes in the frequency and intensity of extreme events, predicting future extreme events as well as understanding the implications of extreme events on society and the environment. The data can also be applied for risk accessment of the extremes. For example, ML/AI models can be developed to predict wildfire risk or forecast HWs by analyzing historical weather data, and past fires or heateave , allowing for early warnings and risk mitigation strategies. Using this dataset, AI-driven risk assessment models can also be built to identify vulnerable energy and utilities infrastructure, imrpove grid resilience and suggest adaptations to withstand extreme weather events. The high-resolution 1km×1km dataset ove PNW are advantageous for real-time, localized and detailed applications. It can enhance the accuracy of early warning systems for extreme weather events, helping authorities and communities prepare for and respond to disasters more effectively. For example, ML models can be developed to provide localized HW predictions for specific neighborhoods or cities, enabling residents and local emergency services to take targeted actions; the assessment of drought severity in specific communities or watersheds within the PNW can help local authorities manage water resources more effectively.

Lin, Xinming↗

Effects of Disturbance on Carbon Sequestration in the New Jersey Pine Barrens

While carbon and water cycling of forests contribute significantly to the Earth's overall biogeochemical cycling, it may be affected by disturbance and climate change. In this research, we contributed to the body of research on leaf-level, ecosystem and regional scale effects of disturbances on forest ecosystems, in an effort to foster more mechanistic understanding, which in turn can improve modeling efforts. Here, we summarize some of the major findings in this research of physical and biogenic disturbances, such as drought, prescribed fire, and insect defoliation, on leaf and ecosystem-scale physiological responses as well as impacts on carbon and water cycling in an Atlantic Coastal Plain upland oak/pine and upland pine forest. Following we have incorporated some of our findings into a new version of the Finite-element Tree-Crown Hydrodynamics (model version 2) model, which improved timing and hysteresis of transpiration modeling for trees. Furthermore, incorporation of hydrodynamics into modeling transpiration improved latent heat flux estimates. In our study on the physiology of the trees, we showed that during drought, stomatal conductance and canopy stomatal conductance were reduced, however, defoliation increased conductance on both leaf-level and canopy scale. Furthermore, after prescribed fire, leaf-level stomatal conductance was unchanged for pines but decreased for oaks, while canopy stomatal conductance decreased temporarily, but then rebounded the following growing season, thus exhibiting transient responses. This study suggests that forest response to disturbance varies from the leaf to ecosystem level as well as species level and thus, these differential responses interplay to determine the fate of forest structure and functioning post disturbance. Incorporating this responses improves model outcome.

54 ENVIRONMENTAL SCIENCES↗

Expanding SPoRT RGBs and Machine Learning Techniques to Enhance Air Quality Monitoring in Southern Asia

Air pollution poses significant environmental, public health, and societal concerns in the Hindu Kush Himalaya (HKH) region of south-central Asia, notably during the dry monsoon months (~November to May). Key contributors to poor air quality include dust from the Middle East and western India, persistent nocturnal fog/smog, and biomass burning. To address this issue, we established a robust air quality and chemistry observation and modeling product suite utilizing multi-spectral red-green-blue (RGB) composite satellite products from Korea’s GEO-KOMPSAT-2A satellite, the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model for dust transport forecasts, and the Weather Research and Forecasting coupled with Chemistry (WRF-Chem) model to predict aerosols and chemical species concentrations. Our team employed similar RGB recipes transitioned by the NASA Short-term Prediction Research and Transition (SPoRT) Center for the GOES-R era products over the Western Hemisphere, with significant success in depicting dust and nocturnal fog / low clouds, and to a lesser extent smoke and fire hot spots. We will extend these capabilities for the HKH region by applying an artificial intelligence (AI) model that objectively identifies dust from multi-spectral satellite data over the Southwestern United States. The AI model will be calibrated for automated dust detection over HKH from GEO-KOMPSAT-2A satellite data, with a goal of developing a similar AI model for objectively identifying smoke as well. The ultimate goal of this effort is to enhance dust and smoke predictions in the region by establishing improved emission initializations in HYSPLIT and/or WRF-Chem through the automated AI detection of dust and smoke.

Jonathan L. Case↗

A semi-empirical NO x model for LES in pulverized coal air-staged combustion

Numerical simulation of pulverized coal combustion with the large eddy simulation (LES) method can provides important instructions on the design optimization of boilers. Because of its huge computational cost, a simple but reliable NO x prediction model is required in LES. Through the air-staged combustion experiments of six kinds of coals which conducted in an electric heated down-fired furnace (DFF), the relationship between NO x reduction and CO+H 2 generation in the fuel-rich zone was identified. Based on this observation, a semi-empirical modeling strategy was proposed: instead of CHi which is difficult to calculate, the concentration of CO+H 2 is used to quantify NO homogeneous reduction. An integrated NO x prediction model was proposed and implemented into LES simulation. Here, the results proved the new model can accurately predict different NO x evolution characteristics under various conditions. Furthermore, the comparison indicated the LES method performs better on NO x prediction than the RANS method, especially in the area where the turbulent fluctuation is relatively stronger.

97 MATHEMATICS AND COMPUTING↗

Evaluation of the Emission, Transport, and Deposition of Mercury and Fine Particulate Matter from Coal-Based Power Plants in the Ohio River Valley Region

As stated in the proposal: Ohio University, in collaboration with CONSOL Energy, Advanced Technology Systems, Inc (ATS) and Atmospheric and Environmental Research, Inc. (AER) as subcontractors, evaluated the impact of emissions from coal-fired power plants in the Ohio River Valley region as they relate to the transport and deposition of mercury and associated fine particulate matter. This evaluation involved two interrelated areas of effort: ambient air monitoring and regional-scale modeling analysis. The scope of work for the ambient air monitoring included the deployment of a surface air monitoring (SAM) station in southeastern Ohio. The SAM station contains sampling equipment to collect and measure mercury (including speciated forms of mercury and wet and dry deposited mercury), particulate matter (PM) mass, PM composition, and gaseous criteria pollutants (CO, NOx, SO2, O3, etc.). Laboratory analyses of time-integrated samples were used to obtain chemical speciation of ambient PM composition and mercury in precipitation. Nearreal- time measurements were used to measure the ambient concentrations of PM mass and all gaseous species including Hg0 and RGM. Approximately 30 months of field data were collected at the SAM site to validate the proposed regional model simulations for episodic and seasonal model runs. The ambient air quality data provides mercury, and fine particulate matter data that can be used by Ohio Valley industries to assess performance on multi-pollutant control systems. The scope of work for the modeling analysis includes (1) development of updated inventories of mercury emissions from coal plants and other important sources in the modeled domain; (2) adapting an existing 3-D atmospheric chemical transport model to incorporate recent advancements in the understanding of mercury transformations in the atmosphere; (3) analyses of the flux of Hg0, RGM, and fine particulate matter in the different sectors of the study region to identify key transport mechanisms; (4) comparison of cross correlations between species from the model results to observations in order to evaluate characteristics of specific air masses associated with long-range transport from a specified source region; and (5) evaluation of the sensitivity of these correlations to emissions from regions along the transport path. This is accomplished by multiple model runs with emissions simulations switched on and off from the various source regions. To the greatest extent possible, model results were compared to field data collected at other air monitoring sites in the Ohio Valley region, operated independently of this project. These sites may include (1) the DOE National Energy Technologies Laboratory’s monitoring site at its suburban Pittsburgh, PA facility; (2) sites in Pittsburgh (Lawrenceville) PA and Holbrook, PA operated by ATS; (3) sites in Steubenville, OH and Pittsburgh, PA operated by the USEPA and/or its contractors; and (4) sites operated by State or local air regulatory agencies. Field verification of model results and predictions provides critical information for the development of cost effective air pollution control strategies by the coal-fired power plants in the Ohio River Valley region.

01 COAL, LIGNITE, AND PEAT↗

Evaporation Induced Entrainment of Contaminants from Evaporating and Burning Liquids.

This interim report details model development, theory, and a literature review focusing on the evaporation induced entrainment (sub-boiling) of contaminated liquids. Entrainment from a variety of sources is the topic of DOE Handbook 3010, and this report deals more broadly with fire related airborne sources of contaminants in hazardous operations. Relatively few studies have examined sub-boiling behavior in the past, however, it can be a phenomenon that presents a fire related risk under hazardous operations. Molecular dynamics simulations are used to infer the gaseous evolution of coordinated complexes, and a model for a water/plutonium/nitrate system is deduced from the simulation results by evaluating the statistical trends of the results. Questions remain as to the chemical reactivity and longevity of entrained species. A generalized computer model capability and simple analytical model assumptions are developed for predicting the results of these and other (boiling and solid entrainment) scenarios. Verification related predictions using these models are illustrated.

36 MATERIALS SCIENCE↗

DEVELOP: Building Capacity in Early Career Individuals to Apply NASA Earth Observations in Health and Air Quality

The NASA DEVELOP National Program builds capacity to use and apply NASA Earth observations to address environmental concerns around the globe. The DEVELOP model builds capacity in both participants (students, recent graduates, and early and transitioning career professionals), who conduct the projects, and partners (decision and policy makers), who are recipients of project methodologies and results. While projects focus on a spectrum of thematic topics, health and air quality related topics made up more than a quarter of DEVELOP’s FY2023 project portfolio. These projects worked in collaboration with over 30 partner organizations throughout the US and internationally to explore how Earth observations could support decision making in areas such as health and air quality, wildland fires, climate, urban development, and transportation and infrastructure. This presentation provides an overview of the DEVELOP model of building capacity to use Earth observation data, environmental decision-making needs identified in health and air quality relevant projects, DEVELOP project case studies, commonly utilized data sources, and lessons learned. Key takeaways include best practices for project development and execution, how to balance learning with delivering impactful results for partners, and water resource relevant decisions guided by project end products.

Remote sensing↗

How consistent are top-down hydrocarbon emissions based on formaldehyde observations from GOME-2 and OMI?

The vertical columns of formaldehyde (HCHO) retrieved from two satellite instruments, the Global Ozone Monitoring Instrument-2 (GOME-2) on Metop-A and the Ozone Monitoring Instrument (OMI) on Aura, are used to constrain global emissions of HCHO precursors from open fires, vegetation and human activities in the year 2010. To this end, the emissions are varied and optimized using the ad-joint model technique in the IMAGESv2 global CTM (chem-ical transport model) on a monthly basis and at the model res-olution. Given the different local overpass times of GOME- 2 (09:30 LT) and OMI (13:30 LT), the simulated diurnal cy-cle of HCHO columns is investigated and evaluated against ground-based optical measurements at seven sites in Europe, China and Africa. The modeled diurnal cycle exhibits large variability, reflecting competition between photochemistry and emission variations, with noon or early afternoon max-ima at remote locations (oceans) and in regions dominated by anthropogenic emissions, late afternoon or evening max-ima over fire scenes, and midday minima in isoprene-rich re-gions. The agreement between simulated and ground-based columns is generally better in summer (with a clear after-noon maximum at mid-latitude sites) than in winter, and the annually averaged ratio of afternoon to morning columns is slightly higher in the model (1.126) than in the ground-based measurements (1.043).The anthropogenic VOC (volatile organic compound) sources are found to be weakly constrained by the inversions on the global scale, mainly owing to their generally minor contribution to the HCHO columns, except over strongly pol-luted regions, like China. The OMI-based inversion yields total flux estimates over China close to the bottom-up inven-tory (24.6 vs. 25.5 TgVOC yr -1 in the a priori) with, how-ever, pronounced increases in the northeast of China and re-ductions in the south. Lower fluxes are estimated based on GOME-2 HCHO columns (20.6 TgVOC yr -1 ), in particular over the northeast, likely reflecting mismatches between the observed and the modeled diurnal cycle in this region.

54 ENVIRONMENTAL SCIENCES↗

Jack Rabbit Pretest Data For TATB Based IHE Model Development

The Jack Rabbit Pretest series consisted of 5 focused hydrodynamic experiments, 2021E PT3, PT4, PT5, PT6, and PT7. They were fired in March and April of 2008 at the Contained Firing Facility, Site 300, Lawrence Livermore National Laboratory, Livermore, California. These experiments measured dead-zone formation and impulse gradients created during the detonation of TATB based insensitive high explosive. This document contains reference data tables for all 5 experiments. These data tables include: (1) Measured laser velocimetry of the experiment diagnostic plate (2) Computed diagnostic plate profile contours through velocity integration (3) Computed center axis pressures through velocity differentiation. All times are in microseconds, referenced from detonator circuit current start. All dimensions are in millimeters. Schematic axi-symmetric cross sections are shown for each experiment. These schematics detail the materials used and dimensions of the experiment and component parts. This should allow anyone wanting to evaluate their TATB based insensitive high explosive detonation model against experiment. These data are particularly relevant in examining reactive flow detonation model prediction in computational simulation of dead-zone formation and resulting impulse gradients produced by detonating TATB based explosive.

33 ADVANCED PROPULSION SYSTEMS↗

A 30-yr high-resolution weather research and forecasting model downscaling data over California and Nevada

This dataset presents a 30-year high resolution meteorological dataset obtained using the WRF model (Advanced version Research WRF version 4.4). We used WRF and European Centre for Medium-Range Weather Forecasts Reanalysis v5 as initial and boundary conditions to generate gridded meteorological variables. A large number of surface weather stations was used for model validation. A multi-physics analysis was first developed to identify a good physics suite extended from 6 November 00 UTC to 10 November 23 UTC, 2018, which included the Camp Fire in northern California. Based on the best physics suite, the downscaling dataset extends from 1 December to 28 February, 1990–2021 and the horizontal domain has 1.5 km grid spacing covering the entire states of California and Nevada in the United States. Comparisons between hourly surface observations and WRF simulations of air temperature, relative humidity and wind speeds show mean absolute errors on the order of (1.6-2.0 C), (10 %) and 1.2–1.5 m s -1 , respectively.

54 ENVIRONMENTAL SCIENCES↗

Energy economic evaluation of hydrogen production by HTGR and solar tower - 18554

Changing the high temperature heat supply of energy intensive industries from today's mostly fossil sources to nuclear or renewable sources offers the opportunity of massive reductions of greenhouse gas emissions. Even though the HTGR as well as the solar tower are technically capable to supply heat at the required high temperature level, it is uncertain whether these technologies can compete with the fossil energy supply. Therefore, the aim of this paper is the assessment of the economic competitiveness of process heat supply by HTGR or solar tower to fossil fired processes using steam methane reforming as industrial example process. Applying a self-developed optimization model, energy economic analyzes are conducted for nuclear, solar and fossil energy supply systems. The results are benchmarked with the IAEA software HEEP and compared to literature values. The analyzes show that hydrogen generation costs of the solar tower system are higher than those of the HTGR system. Both technologies benefit from the support of a fossil heater, as the hydrogen generation costs can be significantly reduced even with a small amount of burned natural gas. Nevertheless, a steam methane reforming process run by HTGR or by solar tower is not yet competitive to the natural gas fired hydrogen production. (authors)

08 HYDROGEN↗

Quantifying impacts of heat waves on power grid operation

Climate change is projected to cause an increase in the severity and frequency of extreme weather events such as heat waves and droughts. Such changes present planning and operating challenges and risks to many economic sectors. In the electricity sector, statistics of extreme events in the past have been used to help plan for future peak loads, determine associated infrastructure requirements, and evaluate operational risks, but industry-standard planning tools have yet to be coupled with or informed by temperature models to explore the impacts of the "new normal" on planning studies. For example, high ambient temperatures during heat waves reduce the output capacity and efficiency of gas fired combustion turbines just when they are needed most to meet peak demands. This paper describes the development and application of a production cost and unit commitment model coupled to high resolution, hourly temperature data and a temperature dependent load model. The coupled system has the ability to represent the impacts of hourly temperatures on load conditions and available capacity and efficiency of combustion turbines, and therefore capture the potential impacts on system reliability and production cost. Ongoing work expands this capability to address the impacts of water availability and temperature on power grid operation.

Climate change↗

Plasma-supported coal combustion in boiler furnace

Plasma activation promotes more effective and environmentally friendly low-rank coal combustion. This paper presents Plasma Fuel Systems that increase the burning efficiency of coal. The systems were tested for fuel oil-free start-up of coal-fired boilers and stabilization of a pulverized-coal flame in power-generating boilers equipped with different types of burners, and burning all types of power-generating coal. Also, numerical modeling results of a plasma thermochemical preparation of pulverized coal for ignition and combustion in the furnace of a utility boiler are discussed in this paper. Two kinetic mathematical models were used in the investigation of the processes of air/fuel mixture plasma activation: ignition and combustion. A I-D kinetic code PLASMA-COAL calculates the concentrations of species, temperatures, and velocities of the treated coal/air mixture in a burner incorporating a plasma source. The I-D simulation results are initial data for the 3-D-modeling of power boiler furnaces by the code FLOREAN. A comprehensive image of plasma-activated coal combustion processes in a furnace of a pulverized-coal-fired boiler was obtained. The advantages of the plasma technology are clearly demonstrated.

01 COAL, LIGNITE, AND PEAT↗

ICME for Creep of Ni-Base Superalloys in Advanced Ultra-Supercritical Steam Turbines

The goal of this project contains three major aspects: (1) critical assessment of existing experimental data, (2) critical assessment of existing modeling capabilities and (3) development of new modeling capabilities that are critical but currently missing in predicting long-term creep behavior of Ni-base superalloys used in advanced ultra- supercritical (A-USC) steam turbines for coal-fired power plants. The project uses advanced materials informatics to datamine the experimental data, uncertainty quantification tools to rigorously assess existing creep-life models, and integration of phase-field and FFT-based crystal plasticity to develop a multi-scale, physics-based, microstructure-sensitive creep model.

20 FOSSIL-FUELED POWER PLANTS↗

Assessing the effects of landcover and land use change on wildfire exposure and risk to communities and olive orchards in Mediterranean landscapes

A growing concern in the Mediterranean region is that recent landcover and land use change is increasing wildfire risk, or the exposure and impacts of wildfire to valued resources. However, the magnitude of these effects is not well understood given the widely diverse landscapes of communities, natural vegetation, and agricultural land. In this study, we use wildfire simulation modeling to assess how landcover and land use changes in three areas of southern Greece have affected exposure of- and fire risk to- communities and economically important permanent agriculture such as Olea europaea (European olive) orchards. We mapped agricultural and wildland fuel change from 2000 to 2020 and simulated fuel scenarios in agricultural land to assess the impacts of agricultural land practices, such as understory clearing, on fire risk. We show that wildfire exposure and risk to communities and permanent agriculture has increased in some areas due to natural fuel densification and decreased in other areas, mainly due to agricultural land expansion. These results highlight that wildfire exposure and risk are driven by local conditions including density and location of communities, spatial arrangement of natural fuels and agricultural land, and agricultural land use practices. Human settlement burn probability and modeled permanent crop loss increased with greater unmaintained agricultural area in all study areas, emphasizing the importance of agricultural land maintenance practices, such as understory clearing, to reduce fuel continuity and fire intensity. Ultimately, quantitative fire risk analyses such as this study provide a useful framework to identify areas of concern where either fuel mitigation or landowner incentives to maintain agricultural land in a less-burnable condition could be applied.

Aaron M Sparks↗