SEARCH · Engineering Papers

Results for “factor analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Simple method for prediction of aircraft noise contours

A method for generating noise contours more rapidly and more simply than previously used programs is discussed. The method gives the area, the noise contour, and its extremities for an arbitrarily complex flight path for both takeoffs and landings with relative ease. The analysis reveals the fundamental nature of the contours and how the various factors that influence its size and shape enter into the analysis. It is noted that the effects of ground attenuation and shielding are omitted as they are important only on the initial portion of flight and are highly dependent upon aircraft configuration. However, the analysis shows that these effects could be included. It is emphasized the the single-event contour is an obvious choice for purposes of minimizing noise impact.

Stewart, E. C.↗

DOE OSTI2016

Effect of reconstruction methods and x-ray tube current–time product on nodule detection in an anthropomorphic thorax phantom: A crossed-modality JAFROC observer study

Purpose: To evaluate nodule detection in an anthropomorphic chest phantom in computed tomography (CT) images reconstructed with adaptive iterative dose reduction 3D (AIDR{sup 3D}) and filtered back projection (FBP) over a range of tube current–time product (mAs). Methods: Two phantoms were used in this study: (i) an anthropomorphic chest phantom was loaded with spherical simulated nodules of 5, 8, 10, and 12 mm in diameter and +100, −630, and −800 Hounsfield units electron density; this would generate CT images for the observer study; (ii) a whole-body dosimetry verification phantom was used to ultimately estimate effective dose and risk according to the model of the BEIR VII committee. Both phantoms were scanned over a mAs range (10, 20, 30, and 40), while all other acquisition parameters remained constant. Images were reconstructed with both AIDR{sup 3D} and FBP. For the observer study, 34 normal cases (no nodules) and 34 abnormal cases (containing 1–3 nodules, mean 1.35 ± 0.54) were chosen. Eleven observers evaluated images from all mAs and reconstruction methods under the free-response paradigm. A crossed-modality jackknife alternative free-response operating characteristic (JAFROC) analysis method was developed for data analysis, averaging data over the two factors influencing nodule detection in this study: mAs and image reconstruction (AIDR{sup 3D} or FBP). A Bonferroni correction was applied and the threshold for declaring significance was set at 0.025 to maintain the overall probability of Type I error at α = 0.05. Contrast-to-noise (CNR) was also measured for all nodules and evaluated by a linear least squares analysis. Results: For random-reader fixed-case crossed-modality JAFROC analysis, there was no significant difference in nodule detection between AIDR{sup 3D} and FBP when data were averaged over mAs [F(1, 10) = 0.08, p = 0.789]. However, when data were averaged over reconstruction methods, a significant difference was seen between multiple pairs of mAs settings [F(3, 30) = 15.96, p < 0.001]. Measurements of effective dose and effective risk showed the expected linear dependence on mAs. Nodule CNR was statistically higher for simulated nodules on images reconstructed with AIDR{sup 3D} (p < 0.001). Conclusions: No significant difference in nodule detection performance was demonstrated between images reconstructed with FBP and AIDR{sup 3D}. mAs was found to influence nodule detection, though further work is required for dose optimization.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2018

Defining Modeling and Analysis Complexity Needs for Remediation - 18425

Many subsurface remedy decisions rely on model predictions or other types of data analyses to support site characterization and remedy selection, design, implementation, performance assessment, and closure. Thus, determining the appropriate level of complexity for modeling and data analysis is important to facilitate subsurface remedy decisions. Multiple factors are important in selecting the appropriate level of complexity in modeling and data analysis. For instance, the type and number of inputs required typically increases with increased complexity of analysis, and the ability to obtain or verify those inputs needs to be considered. The approach needs to establish the relationship between parameters or processes and contaminant transport and the detail of the description needed to meet the analysis objectives. Assessing the modeling complexity associated with the appropriate level of detail can be facilitated by considering complexity of the 1) modeling approach, 2) description of process, and 3) description of heterogeneity. As demonstrated by case studies, using a framework to guide determination of modeling and analysis complexity facilitates selection of the appropriate approach for the site situation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2016

Dynamic order reduction of thin-film deposition kinetics models: A reaction factorization approach

A set of numerical tools for the analysis and dynamic dimension reduction of chemical vapor and atomic layer deposition (ALD) surface reaction models is developed in this work. The approach is based on a two-step process where in the first, the chemical species surface balance dynamic equations are factored to effectively decouple the (nonlinear) reaction rates, a process that eliminates redundant dynamic modes and that identifies conserved quantities. If successful, the second phase is implemented to factor out redundant dynamic modes when species relatively minor in concentration are omitted; if unsuccessful, the technique points to potential model structural problems. An alumina ALD process is used for an example consisting of 19 reactions and 23 surface and gas-phase species. Using the approach developed, the model is reduced by nineteen modes to a four-dimensional dynamic system without any knowledge of the reaction rate values. Results are interpreted in the context of potential model validation studies.

42 ENGINEERING↗

DOE OSTI2015

Percutaneous Lung Thermal Ablation of Non-surgical Clinical N0 Non-small Cell Lung Cancer: Results of Eight Years’ Experience in 87 Patients from Two Centers

PurposeTo evaluate the survival outcomes of percutaneous thermal ablation (RFA + microwaves) for patients presenting N0 non-small-cell lung cancer (NSCLC) ineligible for surgery.Materials and MethodsEighty-seven patients from two comprehensive cancer centers were included. Eighty-two patients were treated with RFA electrodes and five with microwave antenna. Overall survival (OS) and disease-free survival (DFS) were estimated and predictive factors of local tumor progression, OS and DFS identified and compared by univariate and multivariate analysesResultsMedian follow-up was 30.5 months (interquartile range 16.7–51) and tumor size was 21 mm (range 10–54 mm). Treatment was incomplete for 14 patients with a local tumor progression of 11.5, 18.3, and 21.1 % at 1, 2, and 3 years, respectively. Two patients presented with neurological (grade III or IV) complications, and one died of respiratory and multivisceral failure as a result of the procedure at 29 days. In univariate analysis, increasing tumor size (P = 0.003) was the only predictive factor related to risk of local tumor progression. 5-year OS and DFS were 58.1 and 27.9 %, respectively. Sex (P = 0.044), pathology (P = 0.032), and tumor size >2 cm (P = 0.046) were prognostic factors for DFS. In multivariate analysis, pathology (P = 0.033) and tumor size >2 cm (P = 0.032) were independent prognostic factors for DFS.ConclusionsOversized and overlapping ablation of N0 NSCLC was well tolerated, effective, with few local tumor progressions, even over long-term follow-up. Increasing tumor size was the main prognostic factor linked to OS, DFS, and local tumor progression.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

NASA NTRS2013

Mars-GRAM 2010: Additions and Resulting Improvements

The Mars Global Reference Atmospheric Model (Mars-GRAM) is an engineering-level atmospheric model widely used for diverse mission applications. Mars-GRAM has been utilized during previous aerobraking operations in the atmosphere of Mars. Mars-GRAM has also been used in the prediction and validation of Mars Pathfinder hypersonic aerodynamics, the aerothermodynamic and entry dynamics studies for Mars Polar Lander, the landing site selection process for the Mars Science Laboratory (MSL), the Mars Aerocapture System Study (MASS) as well as the Aerocapture Technology Assessment Group (TAG). Most recently, Mars-GRAM 2010 was used to develop the onboard atmospheric density estimator that is part of the Autonomous Aerobraking Development Plan. The most recent release of Mars-GRAM 2010 contains several changes including an update to Fortran 90/95 and the addition of adjustment factors. Following the completion of a comparison analysis between Mars-GRAM, Thermal Emission Spectrometer (TES), as well as Mars Global Surveyor (MGS), Mars Odyssey (ODY), and Mars Reconnaissance Orbiter (MRO) aerobraking density data, adjustment factors were added to Mars-GRAM 2010 that alter the input data from National Aeronautics and Space Administration (NASA) Ames Mars General Circulation Model (MGCM) and the University of Michigan Mars Thermospheric General Circulation Model (MTGCM) for the mapping year 0 user-controlled dust case. The addition of adjustment factors resolved the issue of previous versions of Mars-GRAM being less than realistic when used for sensitivity studies for mapping year 0 and large optical depth values, such as tau equal to 3. Mars-GRAM was evaluated at locations and times of TES limb observations and adjustment factors were determined. For altitudes above 80 km and below 135 km, Mars-GRAM (MTGCM) densities were compared to aerobraking densities measured by Mars Global Surveyor (MGS), Mars Odyssey (ODY), and Mars Reconnaissance Orbiter (MRO) to determine the adjustment factors. The adjustment factors generated by this process had to satisfy the gas law as well as the hydrostatic relation and are expressed as a function of height (z), Latitude (Lat) and areocentric solar longitude (Ls). The greatest adjustments are made at large optical depths such as tau greater than 1. The addition of the adjustment factors has led to better correspondence to TES Limb data from 0-60 km altitude as well as better agreement with MGS, ODY and MRO data at approximately 90-130 km altitude. Improved Mars-GRAM atmospheric simulations for various locations, times and dust conditions on Mars will be presented at the workshop session. The latest results validating Mars-GRAM 2010 versus Mars Climate Sounder data will also be presented. Mars-GRAM 2010 updates have resulted in improved atmospheric simulations which will be very important when beginning systems design, performance analysis, and operations planning for future aerocapture, aerobraking or landed missions to Mars.

Justh, Hilary L.↗

NASA NTRS1990

Random vibration analysis of space flight hardware using NASTRAN

During liftoff and ascent flight phases, the Space Transportation System (STS) and payloads are exposed to the random acoustic environment produced by engine exhaust plumes and aerodynamic disturbances. The analysis of payloads for randomly fluctuating loads is usually carried out using the Miles' relationship. This approximation technique computes an equivalent load factor as a function of the natural frequency of the structure, the power spectral density of the excitation, and the magnification factor at resonance. Due to the assumptions inherent in Miles' equation, random load factors are often over-estimated by this approach. In such cases, the estimates can be refined using alternate techniques such as time domain simulations or frequency domain spectral analysis. Described here is the use of NASTRAN to compute more realistic random load factors through spectral analysis. The procedure is illustrated using Spacelab Life Sciences (SLS-1) payloads and certain unique features of this problem are described. The solutions are compared with Miles' results in order to establish trends at over or under prediction.

Thampi, S. K.↗

DOE OSTI2025

Characterizing Hazardous Gases from NMC811 Materials and Coin Cells with TGA and Tube-Furnace FTIR-MS Evolved-Gas-Analysis

Abuse testing is useful for informing the risks of different battery chemistries but has been limited to larger formats. This paper conducted thermal abuse tests at the smaller coin cell level to determine its relevance in specifying vent gas flammability and toxicity. A nitrogen purge carried the evolved gases into a parallel Fourier-transform infrared spectrometer (FTIR) and a mass spectrometer (MS) downstream of the tube furnace. The experimental system was validated by comparing evolved gas data for single components between the tube furnace system and a thermogravimetric analysis (TGA) instrument. Multiple samples were tested during validation, including CaCO3, electrolyte, delithiated NMC 811 cathode, and lithiated graphite anode. Temperature-resolved gas evolution of HF, CO2, CO, H2, and hydrocarbons from isolated components helped to characterize the emission sources. A previously unreported H2 generation mechanism was found. It was shown that the reduced NMC cathode acts as a catalyst to crack polypropylene-decomposed hydrocarbons into H2 at around 450 degrees C. It was also shown, while studying LiPF6 thermal decomposition, that using the tube furnace with a coin cell casing as the sample holder has some advantages for evolved-gas analysis of environmentally sensitive samples relative to testing in TGA instruments. After validation with single components, a fully charged NMC 811 coin cell was failed in the tube furnace. The measured evolved gases were found to be a combination of the species measured from the single component tests. H2 formation related to the reduced cathode was found to have greater abundance than H2 formed from the anode. Hydrogen fluoride emission factors and diethyl carbonate conversion emission factors assist in understanding the gaseous hazards for larger format cells.

25 ENERGY STORAGE↗

NASA NTRS1984

Impact of Thematic Mapper Sensor Characteristics on Classification Accuracy

A three factor (spectral, spatial, and radiometric resolution), two level (TM and MSS) analysis of variance (ANOVA) approach allowed evaluation of the effects of each factor individually and in all possible combinations. Digital classification accuracy was used as the figure of merit. Nine study sites in Washington, D.C. each of approximately 256 x 256 TM pixels, were randomly selected from the full scene for analysis. These results strongly suggest that the quantization level improvements and the addition of new spectral bands in the visible and middle IR regions (both afforded by the TM sensor design) can result in improved capabilities to accurately delineate land cover categories using a per point Gaussian maximum likelihood classifier. On the other hand, results indicate that the increase in spatial resolution to 30m does not significantly enhance classification accuracy. The spatial result points to an inherent limitation of a per point classifier and to the need to improve data analysis techniques to handle high spatial resolution data.

Williams, D. L.↗

NASA NTRS1983

Impact of thematic mapper sensor characteristics on classification accuracy

A three factor (spectral, spatial, and radiometric resolution), two level (TM and MSS) analysis of variance (ANOVA) approach allowed evaluation of the effects of each factor individually and in all possible combinations. Digital classification accuracy was used as the figure of merit. Nine study sites in Washington, DC, each of approximately 256 x 256 TM pixels, were randomly selected from the full scene for analysis. These results strongly suggest that the quantization level improvements and the addition of new spectral bands in the visible and middle IR regions (both afforded by the TM sensor design) can result in improved capabilities to accurately delineate land cover categories using a per point Gaussian maximum likelihood classifier. On the other hand, results indicate that the increase in spatial resolution to 30 m does not significantly enhance classification accuracy. The spatial result points to an inherent limitation of a per point classifier and to the need to improve data analysis techniques to handle high spatial resolution data.

Williams, D. L.↗

DOE OSTI2016

Cosmology with photometric weak lensing surveys: Constraints with redshift tomography of convergence peaks and moments

Weak gravitational lensing is becoming a mature technique for constraining cosmological parameters, and future surveys will be able to constrain the dark energy equation of state w. When analyzing galaxy surveys, redshift information has proven to be a valuable addition to angular shear correlations. We forecast parameter constraints on the triplet (Ω m ,w,σ 8 ) for a LSST-like photometric galaxy survey, using tomography of the shear-shear power spectrum, convergence peak counts and higher convergence moments. Here we find that redshift tomography with the power spectrum reduces the area of the 1σ confidence interval in (Ω m ,w) space by a factor of 8 with respect to the case of the single highest redshift bin. We also find that adding non-Gaussian information from the peak counts and higher-order moments of the convergence field and its spatial derivatives further reduces the constrained area in (Ω m ,w) by factors of 3 and 4, respectively. When we add cosmic microwave background parameter priors from Planck to our analysis, tomography improves power spectrum constraints by a factor of 3. Adding moments yields an improvement by an additional factor of 2, and adding both moments and peaks improves by almost a factor of 3 over power spectrum tomography alone. We evaluate the effect of uncorrected systematic photometric redshift errors on the parameter constraints. In conclusion, we find that different statistics lead to different bias directions in parameter space, suggesting the possibility of eliminating this bias via self-calibration.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS2012

Design and Analysis Tool for External-Compression Supersonic Inlets

A computational tool named SUPIN has been developed to design and analyze external-compression supersonic inlets for aircraft at cruise speeds from Mach 1.6 to 2.0. The inlet types available include the axisymmetric outward-turning, two-dimensional single-duct, two-dimensional bifurcated-duct, and streamline-traced Busemann inlets. The aerodynamic performance is characterized by the flow rates, total pressure recovery, and drag. The inlet flowfield is divided into parts to provide a framework for the geometry and aerodynamic modeling and the parts are defined in terms of geometric factors. The low-fidelity aerodynamic analysis and design methods are based on analytic, empirical, and numerical methods which provide for quick analysis. SUPIN provides inlet geometry in the form of coordinates and surface grids useable by grid generation methods for higher-fidelity computational fluid dynamics (CFD) analysis. SUPIN is demonstrated through a series of design studies and CFD analyses were performed to verify some of the analysis results.

Slater, John W.↗

DOE OSTI2017

A1 Signature pattern and phylogenetic analysis of full-length env genes in 20 hemophiliacs infected with Korean subclade of HIV-1 subtype B

Twenty patients with hemophilia (HP) were diagnosed with HIV-1, one to two years after exposure to domestic clotting factor IX (DCF), in 1989–90. Previous analysis of pol and vif genes confirmed that HIV-1 transmission to 20 HPs occurred through infusion of DCF. In this study, we determined full-length env gene sequences (about 2,550 bp) in 21 HPs, three plasma donors whose plasma were used in DCF production, and 45 local controls. The env gene from frozen stored sera obtained 1–3 years after diagnosis as well as from samples collected years after infection, was amplified by RT-PCR, and subjected to direct sequencing. Phylogenetic analysis revealed that all sequences were subtype B, with 109 sequences from 64 patients (20 HPs, 3 serum donors, 41 local controls, LCs) belonging to the Korean subclade (KSB) and 13 sequences from 5 patients (1HP infected outside Korea, 4 LCs) not in the KSB. Sequences of the env gene from donors O and P plus the 20 HPs comprised two subclusters within KSB. In addition, signature pattern analysis revealed signature nucleotides at 45 positions between the HPs and LCs (P < 0.05). Surprisingly, specific signature nucleotides positions were conserved 100% in clusters O and P only (at 4 and 1 positions, respectively) with none in LCs. Within both clusters, sequence identity was high. These results are consistent with our previous conclusion that these 20 HPs were infected with viruses in the DCF used for treatment. In addition, we found that there are 25 signature pattern residues in amino acids in env gene of KSB distinct from subtype B.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2019

Increased Expression of DNAJC12 is Associated with Aggressive Phenotype of Gastric Cancer

Background: Identification of gastric cancer-related molecules is necessary to elucidate the pathological mechanisms of this heterogeneous disease. The purpose of this study was to identify novel genes associated with aggressive phenotypes of gastric cancer. Methods: Global expression profiling was conducted using tissues from four patients with metastatic gastric cancer to identify genes overexpressed in gastric cancer. Fifteen gastric cell lines and 262 pairs of surgically resected gastric tissues were subjected to mRNA expression analysis. The contribution of the candidate gene on gastric cancer cell proliferation, invasion, adhesion, and migration were evaluated using small interfering RNA. Results: DnaJ heat shock protein family (Hsp40) member C12 (DNAJC12) was identified as a candidate gene by transcriptome analysis. In clinical samples, DNAJC12 mRNA levels were higher in gastric cancer tissues compared with normal adjacent tissues. Patients with high DNAJC12 expression showed significantly shorter overall survival in our cohort and in the extra-validation cohort analyzed by a published microarray dataset. High DNAJC12 expression in gastric cancer tissues was significantly associated with lymphatic involvement, infiltrative growth type, lymph node metastasis, and advanced stage and was identified as an independent prognostic factor for overall survival in multivariable analysis. Increased expression of DNAJC12 was found in 12 of 14 examined gastric cancer cell lines. Knockdown of DNAJC12 expression significantly decreased the proliferation and invasion abilities of gastric cancer cells. Conclusions: Our findings support DNAJC12 as a candidate gene associated with aggressive phenotypes of gastric cancer.

60 APPLIED LIFE SCIENCES↗

NASA NTRS1976

Monte Carlo investigation of thrust imbalance of solid rocket motor pairs

The Monte Carlo method of statistical analysis is used to investigate the theoretical thrust imbalance of pairs of solid rocket motors (SRMs) firing in parallel. Sets of the significant variables are selected using a random sampling technique and the imbalance calculated for a large number of motor pairs using a simplified, but comprehensive, model of the internal ballistics. The treatment of burning surface geometry allows for the variations in the ovality and alignment of the motor case and mandrel as well as those arising from differences in the basic size dimensions and propellant properties. The analysis is used to predict the thrust-time characteristics of 130 randomly selected pairs of Titan IIIC SRMs. A statistical comparison of the results with test data for 20 pairs shows the theory underpredicts the standard deviation in maximum thrust imbalance by 20% with variability in burning times matched within 2%. The range in thrust imbalance of Space Shuttle type SRM pairs is also estimated using applicable tolerances and variabilities and a correction factor based on the Titan IIIC analysis.

Sforzini, R. H.↗

NASA NTRS1991

Parallel variable-band Choleski solvers for computational structural analysis applications on vector multiprocessor supercomputers

A Choleski method used to solve linear systems of equations that arise in large scale structural analyses is described. The method uses a novel variable-band storage scheme and is structured to exploit fast local memory caches while minimizing data access delays between main memory and vector registers. Several parallel implementations of this method are described for the CRAY-2 and CRAY Y-MP computers demonstrating the use of microtasking and autotasking directives. A portable parallel language, FORCE, is also used for two different parallel implementations, demonstrating the use of CRAY macrotasking. Results are presented comparing the matrix factorization times for three representative structural analysis problems from runs made in both dedicated and multi-user modes on both the CRAY-2 and CRAY Y-MP computers. CPU and wall clock timings are given for the various parallel methods and are compared to single processor timings of the same algorithm. Computation rates over 1 GIGAFLOP (1 billion floating point operations per second) on a four processor CRAY-2 and over 2 GIGAFLOPS on an eight processor CRAY Y-MP are demonstrated as measured by wall clock time in a dedicated environment. Reduced wall clock times for the parallel methods relative to the single processor implementation of the same Choleski algorithm are also demonstrated for runs made in multi-user mode.

Poole, E. L.↗

DOE OSTI2023

A transcriptomic atlas of acute stress response to low pH in multiple Issatchenkia orientalis strains

Because of its natural stress tolerance to low pH, Issatchenkia orientalis (a.k.a. Pichia kudriavzevii) is a promising non-model yeast for bio-based production of organic acids. Yet, this organism is relatively unstudied, and specific mechanisms of its tolerance to low pH are poorly understood, limiting commercial use. In this study, we selected 12 I. orientalis strains with varying acid stress tolerance (six tolerant and six susceptible) and profiled their transcriptomes in different pH conditions to study potential mechanisms of pH tolerance in this species. We identified hundreds of genes whose expression response is shared by tolerant strains but not by susceptible strains, or vice versa, as well as genes whose responses are reversed between tolerant and susceptible strains. We mapped regulatory mechanisms of transcriptomic responses via motif analysis as well as differential network reconstruction, identifying several transcription factors, including Stb5, Mac1, and Rtg1/Rtg3, some of which are known for their roles in acid response in Saccharomyces cerevisiae. Functional genomics analysis of short-listed genes and transcription factors suggested significant roles for energy metabolism and translation-related processes, as well as the cell wall integrity pathway and RTG-dependent retrograde signaling pathway. Finally, we conducted additional experiments for two organic acids, 3-hydroxypropionate and citramalate, to eliminate acid-specific effects and found potential roles for glycolysis and trehalose biosynthesis specifically for response to low pH. In summary, our approach of comparative transcriptomics and phenotypic contrasting, along with a multi-pronged bioinformatics analysis, suggests specific mechanisms of tolerance to low pH in I. orientalis that merit further validation through experimental perturbation and engineering.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Data for A Transcriptomic Atlas of Acute Stress Response to Low pH in Multiple Issatchenkia orientalis Strains

Because of its natural stress tolerance to low pH, Issatchenkia orientalis (a.k.a. Pichia kudriavzevii ) is a promising non-model yeast for bio-based production of organic acids. Yet, this organism is relatively unstudied, and specific mechanisms of its tolerance to low pH are poorly understood, limiting commercial use. In this study, we selected 12 I. orientalis strains with varying acid stress tolerance (six tolerant and six susceptible) and profiled their transcriptomes in different pH conditions to study potential mechanisms of pH tolerance in this species. We identified hundreds of genes whose expression response is shared by tolerant strains but not by susceptible strains, or vice versa, as well as genes whose responses are reversed between tolerant and susceptible strains. We mapped regulatory mechanisms of transcriptomic responses via motif analysis as well as differential network reconstruction, identifying several transcription factors, including Stb5, Mac1, and Rtg1/Rtg3, some of which are known for their roles in acid response in Saccharomyces cerevisiae . Functional genomics analysis of short-listed genes and transcription factors suggested significant roles for energy metabolism and translation-related processes, as well as the cell wall integrity pathway and RTG-dependent retrograde signaling pathway. Finally, we conducted additional experiments for two organic acids, 3-hydroxypropionate and citramalate, to eliminate acid-specific effects and found potential roles for glycolysis and trehalose biosynthesis specifically for response to low pH. In summary, our approach of comparative transcriptomics and phenotypic contrasting, along with a multi-pronged bioinformatics analysis, suggests specific mechanisms of tolerance to low pH in I. orientalis that merit further validation through experimental perturbation and engineering.

Conversion↗