Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “evaluation process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Molten Salt Reactor Fundamental Safety Function PIRT

The phenomenon identification and ranking table (PIRT) process was employed to evaluate the current capability to assess the ability of liquid-salt–fueled molten salt reactors to achieve their fundamental safety functions (FSFs). The PIRT process provides a structured mechanism to elicit and document expert opinions on the most important phenomena and the corresponding level of knowledge with regard to achieving the FSFs. The PIRT panel included reactor developers, accident progression evaluation tool developers, US Department of Energy (DOE) national laboratory technical staff, university researchers, and US Nuclear Regulatory Commission (NRC) staff. The information-gathering process concentrated on phenomena related to accidents in which the fuel salt—including any in the cover gas—has been released from the first barrier layer. This information-gathering process included identifying all potential accidents that could result in the release of a substantial amount of radionuclides that could breach or bypass the first barrier. The PIRT did not identify any previously unrecognized systemic vulnerabilities. However, the elicitation process identified several areas with low levels of knowledge and significant potential impact on accident progression. These areas either require additional research to improve the state of knowledge or additional design conservatism to accommodate the remaining unknowns.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Special Analyses for the Hanford Integrated Disposal Facility Performance Assessment - 20102

In 2014, the Department of Energy (DOE) Office of River Protection and its contractors began to develop a performance assessment for the near-surface disposal of low-level and mixed low-level waste at the Hanford Site's Integrated Disposal Facility (IDF). The IDF is a doubly-lined landfill that was constructed between 2004 and 2006 to be the disposal facility for the vitrified low-activity waste that will be produced at the Waste Treatment and Immobilization Plant (WTP). IDF is also expected to receive solid secondary waste produced at the WTP and other solid wastes from site activities. The IDF has been in a preoperational state awaiting authorization from DOE and a RCRA permit modification from the State of Washington Department of Ecology to receive waste. Both the Disposal Authorization Statement and permit modification require a performance assessment demonstrating that the system of engineered and natural features will limit releases of radionuclides and hazardous chemicals from the IDF and be protective of human health and the environment. The simulated duration is 10,000 years. Based on the analyses presented in the 2017 Integrated Disposal Facility Performance Assessment, DOE issued a conditional Operating Disposal Authorization Statement for the IDF in June 2018. The long-term performance of the IDF to be protective of human health and the environment was evaluated under the requirements of DOE Order 435.1, Radioactive Waste Management. Computer simulations were performed to evaluate whether or not the IDF would comply with DOE requirements. In the time that has passed since the performance assessment was approved by DOE, new information has been discovered that had not been considered in the performance assessment. Since this new information has not been evaluated, the potential impact of the changes have not been taken into consideration in DoE's disposal authorization. DOE and its contractors follow a change control process to screen and, when necessary, evaluate new information that could potentially impact the conclusions of the completed performance assessment. This paper will describe the change control process and provide two examples of evaluations performed following the change control process. The first example evaluates a new waste form for liquid secondary waste that was not evaluated in the performance assessment. In the performance assessment, liquid secondary waste was assumed to be solidified with grout. A new recommendation to dispose of the liquid secondary waste after drying it to a powder was evaluated. The second example evaluates inventory implications from changes to the flow sheet that estimates the feed composition to the low-activity waste vitrification facility. The changes result in higher strontium concentrations in the vitrified waste stream. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Production of more ideal uranium trioxide microspheres for the sol-gel microsphere pelletization process without the use of carbon

Renewed interest by the U.S. Department of Energy in the sol-gel microsphere pelletization process led to an evaluation of dried uranium trioxide (UO 3 ) microspheres produced without the use of carbon by the internal gelation process at Oak Ridge National Laboratory. An earlier study has shown that less dense UO 3 microspheres led to uranium dioxide pellets with higher densities. This effort identified feed formulations that produced dried UO 3 microspheres with the lowest tap densities for gelation temperatures of 333, 343, 353, and 363 K. The tap densities of these dried UO 3 microspheres ranged from 680 to 820 kg/m 3 , which were significantly lower than the previously reported low UO 3 density of 900 kg/m 3 . This study confirmed an earlier observation that the effects of gelation conditions on the properties of the gel sphere are complex since only two of the four best formulations were similar in composition. As a result, the need to age the wet gel spheres in the gelation medium for 20 min at the end of the experiment was also confirmed.

36 MATERIALS SCIENCE↗

EB Vs PAM Vs VAR for Uranium Alloys

Questions were raised during the February ’97 PDP Meeting at LLNL as to the advisability of funding three separate melting development programs (Advanced Vacuum Arc Remelt (VAR), Plasma Arc Melting (PAM) and Electron Beam Melting (EB)) through PDP in this era of shrinking research funds. The main issues seemed to be: 1) Have we evaluated the potentials of the three processes sufficiently to eliminate any of them out of hand and 2) Have any of these processes to date produced results which show clear advantages over the other two. The feeling at the meeting toward the latter seemed to be that all three processes required further development before they would be accepted by the complex as the standard. As far as evaluating potential for process improvements, however, we at Livermore did go through somewhat of a trade study in 1993 when we proposed the EB route. It seemed to us that even with the elimination of the skull caster via a VIM/VAR/VAR route, the problem of recycle limitations in the VIM step due to excessive carbon pick-up limited the potential for a great improvement in material utilization using this method. A single-step, cold hearth route looked to be the preferable choice. Both EB and PAM are used commercially as cold hearth processes, and both have been used for the production of refractory and specialty metals; EB since the mid 1950’s and PAM since the mid 1980’s. Both seem to have found their individual niches with some applications being suited to EB and others to PAM. Both can be adapted to continuous casting techniques and both are capable of imparting the high heat fluxes necessary to melt refractory metals. The major differences appear to be that for most applications, the EB process is capable of producing a purer product, while PAM results in less loss of volatile components. There exists an abundance of information in the open literature on the results of processing via both routes on various materials. The attached 1984 paper gives a good explanation of electron beam melting and plasma melting, and, I believe, a fair assessment of the advantages and limitations of both processes.

36 MATERIALS SCIENCE↗

Induction coupled thermomagnetic processing: A disruptive technology

Here, one of the major goals of the U.S. Department of Energy (DoE) is to achieve energy savings with a corresponding reduction in the carbon footprint. With this in mind, the DoE sponsored the Induction Coupled Thermomagnetic Processing (ITMP) project with major partners Eaton Corp., Ajax Tocco Magnethermic, and Oak Ridge National Laboratory (ORNL) to evaluate the viability of processing metals in a strong magnetic field.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Disposal Systems Evaluations and Tool Development - Engineered Barrier System Evaluation (Work Package LL1015080425)

The Disposal Systems Evaluation Framework (DSEF) will use a logical process for developing one or more disposal system concepts (also referred to as repository system in this report) for any given waste form and geologic setting combination. In the Features, Events, and Processes (FEPs) group of work packages, there are seven categories of waste forms and eight categories of geologic setting being studied. The DSEF will also establish a Used Fuel Disposition Campaign (UFDC) knowledge management system to organize high-level information, data, and assumptions, thereby facilitating consistency in high-level system simulation and economic analyses. This system likely will be housed with the INL-based documentation system. Attention is given to lessons oearned from the systems used at the Waste Isolation Pilot Plant (WIPP) and the Yucca Mountain Project (YMP). Where reference material from other programs (e.g., international) is used or cited, the knowledge-management system imports the reference material directly or refer to it in bibliography form. Alternative data sets (e.g., from other programs) will also be utilized to evaluate their influence on DSEF analyses for given waste form and disposal-system combinations. The knowledge-management system can also be used to maintain the results of DSEF realizations, enabling the comparison and ranking of various waste-form/disposal-system-environment/disposal-system-design options. Finally, the UFDC knowledge-management system will be able to provide a compendium of 'templates' that can be utilized, in a labor-efficient fashion, to build parallel DSEF analyses (e.g., 'one offs'). The DSEF will not be a stand-alone, push-the-button and wait for the results, item of software. it will use osftware (probably EXCEL, initially), to guide the team members through a logical process of evaluating combinations of waste-form, disposal-syste-environment, and disposal-system design. In later stages, it will utilize software developed in the field of knowledge engineering and knowledge-management systems (Umeki et al. 2009). At certain points in the logical process, the DSEF software will point the evaluate to other software tools to do analyses needed to move the process forward. In the development of the DSEF, they will be mindful to make it no more complex than necessary to evaluate the system being considered. The DSEF will organize and document the work such that multiple realizations for different combinations can be compared and contrasted.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Database for inelastic collisions of sodium atoms with electrons, protons, and multiply charged ions

The available experimental and theoretical cross section data for inelastic collision processes of ground (3s) and excited (3p, 4s, 3d, 4p, 5s, 4d, and 4f) state Na atoms with electrons, protons, and multiply charged ions have been collected and critically assessed. In addition to existing data, electron-impact cross sections, for both excitation and ionization, have been calculated using the convergent close-coupling approach. In the case of proton-impact cross section, the database was enlarged by new atomic-orbital close-coupling calculations. Both electron-impact and proton-impact processes include excitation from the ground state and between excited states (n = 3-5). For electron-impact, ionization from all states is also considered. In the case of proton-impact electron loss, cross sections (the sum of ionization and single-electron charge transfer) are given. Well-established analytical formulae used to fit cross sections, published by Wutte et al. and Schweinzer et al. for collisions with lithium atoms, were adapted to sodium. The 'recommended cross sections' for the processes considered have been critically evaluated and fitted using the adapted analytical formulae. For each inelastic process the fit parameters determined are tabulated. We also present the assessed data in graphical form. The criteria for comprehensively evaluating the accuracy of the experimental data, theoretical calculations, and procedures used in determining the recommended cross sections are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Research of MOX Fuels in Japan

In Japan, uranium and plutonium mixed oxide (MOX) fuels has been developed for sodium-cooled fast reactors. The developing MOX fuels come in variety of O/M ratio, Pu content, minor actinide (MA) content and density. We have studied a science based fuel technology to evaluate fuel behaviors in fabrication process and irradiation condition of such various fuels. The technologies which are constructed based on experimental database can apply to mechanistic evaluation of fuel behaviors. To develop the science based fuel technology, many different varieties of basic properties have been investigated, and experimental database was constructed. And a mechanistic physical property model has been studied. The models contribute to describe various behaviors in fuel fabrication process and irradiation condition. In Japan, the researches on MOX fuel technologies have been carried out for sodium cooled fast reactor development. It is important to develop the fuel technologies on fuel fabrication process and irradiation performance model evaluation. The researches will be carried out by experimental approach and expanded in international collaboration frame works such as the CNWG and The Generation IV International Forum (GIF). (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Implementation and Evaluation of Physics-Driven Dynamic Entrainment-Mixing Parameterization in a Climate Model and Its Impact on Low-Cloud Simulation

The turbulent entrainment-mixing process in the Community Earth System Model version 1.2 (CESM1.2) is assumed to follow the extremely inhomogeneous entrainment-mixing. However, different entrainment-mixing scenarios can occur in real clouds. To address this deficiency, a unifying parameterization that represents different entrainment-mixing processes is implemented and evaluated in CESM1.2. The results indicate that the homogeneous mixing degree values simulated by the new parameterization in CESM1.2 are predominantly greater than 50%, suggesting a tendency toward homogeneous mixing. Compared to the extremely inhomogeneous mixing mechanism, the new parameterization increases the cloud droplet number concentration (Nc). More importantly, the new parameterization improves low-cloud fraction (CLDLOW) simulation in Northwest Pacific (NWP) and Southeast Pacific (SEP) regions, with relative improvements of 2.95% and 4.17%, respectively. Furthermore, the improvements reach up to 44.6% and 16.2% in the NWP and SEP regions, respectively, when considering the relationship between N c and CLDLOW. Further analysis reveals that the new parameterization enhances cloud optical depth, longwave radiative cooling effect, net condensation rate, cloud water mixing ratio, lower-troposphere stability, and CLDLOW by increasing N c . Additionally, these results underscore the importance of improving entrainment-mixing parameterization in climate models.

54 ENVIRONMENTAL SCIENCES↗

Interfacial degradation effects of aqueous solution-processed molybdenum trioxides on the stability of organic solar cells evaluated by a differential method

The authors investigate the influence of two hole interfacial materials poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) and aqueous solution-processed MoO{sub 3} (sMoO{sub 3}) on cell stability. sMoO{sub 3}-based device demonstrated obviously improved stability compared to PEDOT:PSS-based one. Current-voltage characteristics analysis is carried out to investigate the effect of the hole interfacial layers on the cell stability. The formation of additional trap states at the interfaces between the hole interfacial layer and the active layer in degraded devices is verified by a differential method. Improved cell stability is attributed to a relatively stable sMoO{sub 3} interfacial layer compared to PEDOT:PSS by comparing their different trap states distributions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of emerging parallel optical link technology for high energy physics

Modern particle detectors utilize optical fiber links to deliver event data to upstream trigger and data processing systems. Future detector systems can benefit from the development of dense arrangements of high speed optical links emerging from industry advancements in transceiver technology. Supporting data transfers of up to 120 Gbps in each direction, optical engines permit assembly of the optical transceivers in close proximity to ASICs and FPGAs. Test results of some of these parallel components will be presented including the development of pluggable FPGA Mezzanine Cards equipped with optical engines to provide to collaborators on the Versatile Link Common Project for the HI-LHC at CERN.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

4th Quarter and Annual Transportation Report FY2018

This report satisfies the U.S. Department of Energy, National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary of waste shipments to the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) in Area 5. This report summarizes the fourth quarter of fiscal year (FY) 2018 and serves as an annual report for the following types of shipments: Low-Level Radioactive Waste (LLW); Mixed Low-Level Radioactive Waste (MLLW); Classified Non-Radioactive (CNR) Waste; Classified Non-Radioactive Hazardous (CNRH) Waste; Tabular summaries are provided that include the following: Number and external volume of LLW, MLLW, and CNR/CNRH shipments; Waste generators for LLW, MLLW, and CNR/CNRH shipments to and on the NNSS; Carriers for LLW, MLLW, and CNR/CNRH shipments to and on the NNSS; Waste generator shipments by quarter; Highway routes used by carriers; Incident and accident data applicable to LLW, MLLW, and CNR/CNRH shipments. In this report, shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. Volume reports showing cubic feet (ft 3 ) generated using the Low-Level Waste Information System may vary slightly due to rounding conventions for conversions from cubic meters to cubic feet. Shipments are transported by motor carriers that are either identified on the U.S. Department of Energy (DOE) Motor Carrier Evaluation Program (MCEP) list, have been evaluated in a manner similar to the MCEP process, or are government vehicles. Government vehicles are not evaluated using the MCEP process but are fully compliant with all transportation regulations and requirements.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Quantifying ecological memory in plant and ecosystem processes

Abstract The role of time in ecology has a long history of investigation, but ecologists have largely restricted their attention to the influence of concurrent abiotic conditions on rates and magnitudes of important ecological processes. Recently, however, ecologists have improved their understanding of ecological processes by explicitly considering the effects of antecedent conditions. To broadly help in studying the role of time, we evaluate the length, temporal pattern, and strength of memory with respect to the influence of antecedent conditions on current ecological dynamics. We developed the stochastic antecedent modelling ( SAM ) framework as a flexible analytic approach for evaluating exogenous and endogenous process components of memory in a system of interest. We designed SAM to be useful in revealing novel insights promoting further study, illustrated in four examples with different degrees of complexity and varying time scales: stomatal conductance, soil respiration, ecosystem productivity, and tree growth. Models with antecedent effects explained an additional 18–28% of response variation compared to models without antecedent effects. Moreover, SAM also enabled identification of potential mechanisms that underlie components of memory, thus revealing temporal properties that are not apparent from traditional treatments of ecological time‐series data and facilitating new hypothesis generation and additional research.

Ogle, Kiona↗

K-Basins Sludge Treatment and Packaging at the Hanford Site - 13585

Highly radioactive sludge resulting from the storage of degraded spent nuclear fuel has been consolidated in Engineered Containers (ECs) in the 105-K West Storage Basin located on the Hanford site near the Columbia River in Washington State. CH2M Hill Plateau Remediation Company (CHPRC) is proceeding with a project to retrieve the sludge, place it in Sludge Transport and Storage Containers (STSCs) and store those filled containers within the T Plant Canyon facility on the Hanford Site Central Plateau (Phase 1). Retrieval and transfer of the sludge material will enable removal of the 105-K West Basin and allow remediation of the subsurface contamination plumes under the basin. The U.S. Department of Energy (DOE) plans to treat and dispose of this K Basins sludge (Phase 2) as Remote Handled Transuranic Waste (RH TRU) at the Waste Isolation Pilot Plant (WIPP) located in New Mexico. The K Basin sludge currently contains uranium metal which reacts with water present in the stored slurry, generating hydrogen and other byproducts. The established transportation and disposal requirements require the transformation of the K Basins sludge to a chemically stable, liquid-free, packaged waste form. The Treatment and Packaging Project includes removal of the containerised sludge from T Plant, the treatment of the sludge as required, and packaging of all the sludge into a form that is certifiable for transportation to and disposal at WIPP. Completion of this scope will require construction and operation of a Sludge Treatment and Packaging Facility (STPF), which could be either a completely new facility or a modification of an existing Hanford Site facility. A Technology Evaluation and Alternatives Analysis (TEAA) for the STP Phase 2 was completed in 2011. A Request for Technology Information (RFI) had been issued in October 2009 to solicit candidate technologies for use in Phase 2. The RFI also included a preliminary definition of Phase 2 functions and requirements. Potentially applicable technologies were identified through a commercial procurement process, technical workshops, and review of the numerous previous sludge treatment technology studies. The identified technology approaches were screened using the criteria established in the Decision Plan, and focused bench top feasibility testing was conducted. Engineering evaluations of the costs, schedules, and technical maturity were developed and evaluated. Recommendations were developed based on technical evaluations. The criteria used in the evaluation process were as follows: (1) Safety, (2) Regulatory/stakeholder acceptance, (3) Technical maturity, (4) Operability and maintainability, (5) Life cycle cost and schedule, (6) Potential for beneficial integration with ongoing STP-Phase 1 activities, and (7) Integration with Site-wide RH-TRU processing/packaging, planning, schedule, and approach. The TEAA recommended Warm Water Oxidation (WWO) as the baseline treatment technology and two risk reduction enhancement options for further consideration during development of the process - size reduction and chemical oxidation (Fenton's reagent). The enhancement options would potentially allow a useful reduction in the total operating time required to process the K Basins sludge. The U.S. Department of Energy's Richland Field Office (DOE-RL) has approved this recommended technical approach. The baseline process can be broken down into the following main process steps: (1) STSC transfer from T Plant to the Sludge Treatment and Packaging Facility (STPF). (2) Retrieval of sludge from the STSCs and transfer to the Receipt and Reaction Tank (RRT). (3) Preparation for immobilization by oxidation using heated water (i.e., WWO) for those batches that require it and concentration by evaporating water at about atmospheric pressure in the RRT. (4) Immobilization by using additives to eliminate free liquids and packaging of the treated sludge into drums. (5) Inspection and handling of the filled drums prior to transfer to a separate storage and shipping facility. (6) Handling of vapor, condensate, and other waste streams generated by the process. Each of these steps is discussed in the paper, together with the current state of progress in developing the technology and requirements for continued development. A schematic of the recommended baseline WWO treatment process is given below. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Commercialization of High-Density High Assay Low Enriched Uranium Fuel Systems

The Office of Reactor Conversion and Uranium Supply (NA 231) at the National Nuclear Security Administration leads the conversion effort for the United States High Performance Research Reactors (USHPRR). These reactors are the final civilian reactors in the US to transition from High Enriched Uranium (HEU) to high assay low enriched uranium (HALEU). Each of these reactors represents unique capabilities and no currently available fuel system meets their needs for conversion. The Fuel Fabrication (FF) Pillar of the USHPRR project is responsible for the fabrication of experimental elements, conversion elements, and establishing a commercial economical production capability. FF is also responsible to share with the domestic and international community the theoretical knowledge gained. Other pillars within the USHPRR project provide the experimental and conversion fuel designs, assist the reactors with licensing activities, and ensure the entire fuel cycle is evaluated. Over the last decade, FF has worked with the production partners at Y-12 National Security Complex (Y-12) and BWXT Nuclear Operations Group, Research and Test Reactors (BWXT). Y-12 has begun processing the alloy feedstock for the conversion elements with a qualified process. BWXT has started the final fabrication of the experimental elements. Once the experimental elements are complete, BWXT will begin conversion element fabrication. The FF Pillar resides at Pacific Northwest National Laboratory (PNNL) and uses PNNL, universities, commercial vendors, and the DOE national laboratory system to evaluate process development activities to improve the process steps. FF supports the fabrication of two high density fuel systems, monolithic U-10Mo (Figure 1) and Uranium Silicide (Figure 2). The U-10Mo fuel system is further along the development process. FF assists in long term planning with the production partners. This includes ramping production of the elements from experimental quantities to annual steady state needs. As part of the ramp up, opportunities to improve yield and product quality are identified to ensure the fuel systems are cost effective.

Catalan, Michael A. [BATTELLE (PACIFIC NW LAB)]↗

A flexible importance sampling method for integrating subgrid processes

Numerical models of weather and climate need to compute grid-box-averaged rates of physical processes such as microphysics. These averages are computed by integrating subgrid variability over a grid box. For this reason, an important aspect of atmospheric modeling is spatial integration over subgrid scales. The needed integrals can be estimated by Monte Carlo integration. Monte Carlo integration is simple and general but requires many evaluations of the physical process rate. To reduce the number of function evaluations, this paper describes a new, flexible method of importance sampling. It divides the domain of integration into eight categories, such as the portion that contains both precipitation and cloud, or the portion that contains precipitation but no cloud. It then allows the modeler to prescribe the density of sample points within each of the eight categories. The new method is incorporated into the Subgrid Importance Latin Hypercube Sampler (SILHS). The resulting method is tested on drizzling cumulus and stratocumulus cases. In the cumulus case, the sampling error can be considerably reduced by drawing more sample points from the region of rain evaporation.

54 ENVIRONMENTAL SCIENCES↗

Human Performance Measures for the Evaluation of Nuclear Power Plant Control Room Interfaces: A Systematic Review - 265

The purpose of this study was to review the literature related to measuring human performance in the design and evaluation of the human-system interface (HSI) of nuclear power plant (NPP) control rooms and synthesize lessons learned and future directions for research and practice in this field. The design and evaluation of digital or hybrid HSI requires comprehensive measurement of human performance to ensure quality and safety of the nuclear power process control. Human factors evaluation frameworks have been proposed to guide the measurement of human performance constructs. However, there are few guides for selecting appropriate measures for those constructs. A systematic review of empirical research literature was conducted. Studies were identified through academic publication databases and grey literature searches. Eligible studies were coded and information regarding human performance measures was extracted and analyzed. A total of 80 studies met the criteria. Human performance measures extracted from the reviewed studies included measures of: behavioral performance; workload; situation awareness; human-human or human-machine cooperation; other cognitive performance indicators; and system performance. Behavioral performance (speed and accuracy), workload, and situation awareness were the most frequently measured constructs with validated and domain-specific instruments. The results of the literature review provided an overview of the human performance constructs and their corresponding measures for NPP control room HSI evaluation. These results can be used as an initial guide to establish appropriate and comprehensive measurements of human performance for such evaluations. Future directions in measure development are also discussed. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Surface Energy Balance Responses to Radiative Forcing in the Central Arctic From MOSAiC and Models

The Arctic surface energy budget (SEB) couples the atmosphere with the sea ice, making it useful for both studying surface processes as well as evaluating models. Improved understanding of atmosphere-ice interactions is required to improve models, requiring year-round observations to address seasonally dependent biases. This work uses novel observations from the MOSAiC expedition to quantify the responses of surface fluxes to radiative forcing over sea ice throughout a complete annual cycle. We identify two primary regimes of flux response: an ice growth regime in winter and an ice melt regime in summer. In the growth regime, changes in radiative forcing impact upwelling longwave, sensible heat, and subsurface heat fluxes, whereas in the melt regime changes in radiative forcing primarily alter the amount of melt and subsurface transmission because the surface temperature is fixed. These observed responses of surface fluxes to radiative forcing are used to evaluate seven weather forecast models during the ice growth regime. In most models, the responses of surface fluxes to radiative forcing do not match observations. Many models also have biased downwelling longwave. One model (the Coupled Arctic Forecast System; CAFS) adequately captures both the mean radiative forcing and the flux responses in winter. CAFS is further evaluated against observations spanning the full MOSAiC year, demonstrating sufficient agreement to provide a more generalized understanding of these SEB process relationships across the Arctic.

54 ENVIRONMENTAL SCIENCES↗