Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Use of polarimetric radar measurements to constrain simulated convective cell evolution: a pilot study with Lagrangian tracking

Abstract. To probe the potential value of a radar-driven field campaign to constrain simulation of isolated convection subject to a strong aerosol perturbation, convective cells observed by the operational KHGX weather radar in the vicinity of Houston, Texas, are examined individually and statistically. Cells observed in a single case study of onshore flow conditions during July 2013 are first examined and compared with cells in a regional model simulation. Observed and simulated cells are objectively identified and tracked from observed or calculated positive specific differential phase ( K DP ) above the melting level, which is related to the presence of supercooled liquid water. Several observed and simulated cells are subjectively selected for further examination. Below the melting level, we compare sequential cross sections of retrieved and simulated raindrop size distribution parameters. Above the melting level, we examine time series of K DP and radar differential reflectivity ( Z DR ) statistics from observations and calculated from simulated supercooled rain properties, alongside simulated vertical wind and supercooled rain mixing ratio statistics. Results indicate that the operational weather radar measurements offer multiple constraints on the properties of simulated convective cells, with substantial value added from derived K DP and retrieved rain properties. The value of collocated three-dimensional lightning mapping array measurements, which are relatively rare in the continental US, supports the choice of Houston as a suitable location for future field studies to improve the simulation and understanding of convective updraft physics. However, rapid evolution of cells between routine volume scans motivates consideration of adaptive scan strategies or radar imaging technologies to amend operational weather radar capabilities. A 3-year climatology of isolated cell tracks, prepared using a more efficient algorithm, yields additional relevant information. Isolated cells are found within the KHGX domain on roughly 40 % of days year-round, with greatest concentration in the northwest quadrant, but roughly 5-fold more cells occur during June through September. During this enhanced occurrence period, the cells initiate following a strong diurnal cycle that peaks in the early afternoon, typically follow a south-to-north flow, and dissipate within 1 h, consistent with the case study examples. Statistics indicate that ~  150 isolated cells initiate and dissipate within 70 km of the KHGX radar during the enhanced occurrence period annually, and roughly 10 times as many within 200 km, suitable for multi-instrument Lagrangian observation strategies. In addition to ancillary meteorological and aerosol measurements, robust vertical wind speed retrievals would add substantial value to a radar-driven field campaign.

54 ENVIRONMENTAL SCIENCES↗

Use of Polarimetric Radar Measurements to Constrain Simulated Convective Cell Evolution: A Pilot Study with Lagrangian Tracking

To probe the potential value of a radar-driven field campaign to constrain simulation of isolated convection subject to a strong aerosol perturbation, convective cells observed by the operational KHGX weather radar in the vicinity of Houston, Texas, are examined individually and statistically. Cells observed in a single case study of onshore flow conditions during July 2013 are first examined and compared with cells in a regional model simulation. Observed and simulated cells are objectively identified and tracked from observed or calculated positive specific differential phase (K(sub DP)) above the melting level, which is related to the presence of supercooled liquid water. Several observed and simulated cells are subjectively selected for further examination. Below the melting level, we compare sequential cross sections of retrieved and simulated raindrop size distribution parameters. Above the melting level, we examine time series of KDP and radar differential reflectivity (Z(sub DR)) statistics from observations and calculated from simulated supercooled rain properties, alongside simulated vertical wind and supercooled rain mixing ratio statistics. Results indicate that the operational weather radar measurements offer multiple constraints on the properties of simulated convective cells, with substantial value added from derived K(sub DP) and retrieved rain properties. The value of collocated three-dimensional lightning mapping array measurements, which are relatively rare in the continental US, supports the choice of Houston as a suitable location for future field studies to improve the simulation and understanding of convective updraft physics. However, rapid evolution of cells between routine volume scans motivates consideration of adaptive scan strategies or radar imaging technologies to amend operational weather radar capabilities. A 3-year climatology of isolated cell tracks, prepared using a more efficient algorithm, yields additional relevant information. Isolated cells are found within the KHGX domain on roughly 40 % of days year-round, with greatest concentration in the northwest quadrant, but roughly 5-fold more cells occur during June through September. During this enhanced occurrence period, the cells initiate following a strong diurnal cycle that peaks in the early afternoon, typically follow a south-to-north flow, and dissipate within 1 h, consistent with the case study examples. Statistics indicate that ∼ 150 isolated cells initiate and dissipate within 70 km of the KHGX radar during the enhanced occurrence period annually, and roughly 10 times as many within 200 km, suitable for multi-instrument Lagrangian observation strategies. In addition to ancillary meteorological and aerosol measurements, robust vertical wind speed retrievals would add substantial value to a radar-driven field campaign.

Fridlind, Ann M.↗

Uncertainty Quantification in CO2 Trapping Mechanisms: A Case Study of PUNQ-S3 Reservoir Model Using Representative Geological Realizations and Unsupervised Machine Learning

Evaluating uncertainty in CO2 injection projections often requires numerous high-resolution geological realizations (GRs) which, although effective, are computationally demanding. This study proposes the use of representative geological realizations (RGRs) as an efficient approach to capture the uncertainty range of the full set while reducing computational costs. A predetermined number of RGRs is selected using an integrated unsupervised machine learning (UML) framework, which includes Euclidean distance measurement, multidimensional scaling (MDS), and a deterministic K-means (DK-means) clustering algorithm. In the context of the intricate 3D aquifer CO2 storage model, PUNQ-S3, these algorithms are utilized. The UML methodology selects five RGRs from a pool of 25 possibilities (20% of the total), taking into account the reservoir quality index (RQI) as a static parameter of the reservoir. To determine the credibility of these RGRs, their simulation results are scrutinized through the application of the Kolmogorov–Smirnov (KS) test, which analyzes the distribution of the output. In this assessment, 40 CO2 injection wells cover the entire reservoir alongside the full set. The end-point simulation results indicate that the CO2 structural, residual, and solubility trapping within the RGRs and full set follow the same distribution. Simulating five RGRs alongside the full set of 25 GRs over 200 years, involving 10 years of CO2 injection, reveals consistently similar trapping distribution patterns, with an average value of Dmax of 0.21 remaining lower than Dcritical (0.66). Using this methodology, computational expenses related to scenario testing and development planning for CO2 storage reservoirs in the presence of geological uncertainties can be substantially reduced.

Mahjour, Seyed Kourosh↗

Optimization of Workload Distribution of Data Centers Based on a Self-Learning In Situ Adaptive Tabulation Model

Data center cooling typically involves non-uniform airflow and temperature distributions, which are affected by the IT workload distribution. It is helpful to simulate the airflow and temperature to optimize the workload distribution. Traditional computational fluid dynamics (CFD) simulation is usually time-consuming while conventional reduced order models (ROMs), though computationally fast, may generate inaccurate results even after being fully trained. In Situ Adaptive Tabulation (ISAT), contracting to conventional ROM, can make prediction with error lower than a user-specified tolerance. To demonstrate using of ISAT for optimal workload distribution in data center, this paper presents a preliminary study of an ISAT-based genetic algorithm optimization platform. The ISAT is trained offline by using the results from CFD simulations using a hypothetical simple data center. The optimal workload distribution determined by the platform leads to approximately 6.8% of energy savings when compared to the benchmark with a uniform workload distribution. We note that the time cost for the entire optimization process, including the training of ISAT is about 4 hours, which is acceptable in the design phase.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

TURBULENT CLUSTERING OF PROTOPLANETARY DUST AND PLANETESIMAL FORMATION

We study the clustering of inertial particles in turbulent flows and discuss its applications to dust particles in protoplanetary disks. Using numerical simulations, we compute the radial distribution function (RDF), which measures the probability of finding particle pairs at given distances, and the probability density function of the particle concentration. The clustering statistics depend on the Stokes number, St, defined as the ratio of the particle friction timescale, {tau}{sub p}, to the Kolmogorov timescale in the flow. In agreement with previous studies, we find that, in the dissipation range, the clustering intensity strongly peaks at St {approx_equal} 1, and the RDF for St {approx} 1 shows a fast power-law increase toward small scales, suggesting that turbulent clustering may considerably enhance the particle collision rate. Clustering at inertial-range scales is of particular interest to the problem of planetesimal formation. At these large scales, the strongest clustering is from particles with {tau}{sub p} in the inertial range. Clustering of these particles occurs primarily around a scale where the eddy turnover time is {approx}{tau}{sub p}. We find that particles of different sizes tend to cluster at different locations, leading to flat RDFs between different particles at small scales. In the presence of multiple particle sizes, the overall clustering strength decreases as the particle size distribution broadens. We discuss particle clustering in two recent models for planetesimal formation. We argue that, in the model based on turbulent clustering of chondrule-size particles, the probability of finding strong clusters that can seed planetesimals may have been significantly overestimated. We discuss various clustering mechanisms in simulations of planetesimal formation by gravitational collapse of dense clumps of meter-size particles, in particular the contribution from turbulent clustering due to the limited numerical resolution.

79 ASTRONOMY AND ASTROPHYSICS↗

POPULATION STUDY FOR {gamma}-RAY PULSARS WITH THE OUTER GAP MODEL

Inspired by the increase of the population of {gamma}-ray emitting pulsars by the Fermi telescope, we perform a population study for {gamma}-ray emitting canonical pulsars. We use a Monte Carlo technique to simulate the Galactic population of neutron stars and the radio pulsars. For each simulated neutron star, we consider the {gamma}-ray emission from the outer gap accelerator in the magnetosphere. In our outer gap model, we apply the gap closure mechanism proposed by Takata et al., in which both photon-photon pair-creation and magnetic pair-creation processes are considered. Simulating the sensitivities of previous major radio surveys, our simulation predicts that there are {approx}18-23 radio-loud and {approx}26-34 {gamma}-ray-selected {gamma}-ray pulsars, which can be detected with a {gamma}-ray flux F{sub {gamma}} {>=} 10{sup -10} erg cm{sup -2} s{sup -1}. Applying the sensitivity of the six month observation of the Fermi telescope, 40-61 radio-selected and 36-75 {gamma}-ray selected pulsars are detected within our simulation. We show that the distributions of various pulsar parameters for the simulated {gamma}-ray pulsars can be consistent with the observed distribution of the {gamma}-ray pulsars detected by the Fermi telescope. We also predict that {approx}64 radio-loud and {approx}340 {gamma}-ray-selected pulsars irradiate the Earth with a flux F{sub {gamma}} {>=} 10{sup -11} erg cm{sup -2} s{sup -1}, and most of those {gamma}-ray pulsars are distributed with a distance greater than 1 kpc and a flux F{sub {gamma}} {approx} 10{sup -11} erg cm{sup -2} s{sup -1}. The ratio between the radio-selected and {gamma}-ray-selected pulsars depends on the sensitivity of the radio surveys. We also discuss the Galactic distribution of the unidentified Fermi sources and the canonical {gamma}-ray pulsars.

79 ASTRONOMY AND ASTROPHYSICS↗

The DESI One-Percent survey: exploring the Halo Occupation Distribution of Emission Line Galaxies with AbacusSummit simulations

The One-Percent survey of the Dark Energy Spectroscopic Instrument collected ~ 270k emission line galaxies (ELGs) at 0.8 < z < 1.6. The high completeness of the sample allowed the clustering to be measured down to scales never probed before, 0.04 Mpc/h in rp for the projected 2-point correlation function (2PCF) and 0.17 Mpc/h in galaxy pair separation s for the 2PCF monopole and quadrupole. The most striking feature of the measurements is a strong signal at the smallest scales, below 0.2 Mpc/h in rp and 1 Mpc/h in s. We analyse these data in the halo occupation distribution framework. We consider different distributions for central galaxies, a standard power law for satellites with no condition on the presence of a central galaxy and explore several extensions of these models. For all considered models, the mean halo mass of the sample is found to be log10 $\langle$Mh$\rangle$ ~ 11.9. We obtain a satellite mean occupation function which agrees with physically motivated ELG models only if we introduce central-satellite conformity, meaning that the satellite occupation is conditioned by the presence of central galaxies of the same type. To achieve in addition a good modelling of the clustering between 0.1 and 1 Mpc/h in rp, we allow for ELG positioning outside of the halo virial radius and find 0.5% of ELGs residing in the outskirts of halos. Furthermore, the satellite velocity dispersion inside halos is found to be ~ 30% larger than that of the halo dark matter particles. These are the main findings of our work. Here we investigate assembly bias as a function of halo concentration, local density or local density anisotropies and observe no significant change in our results. We split the data sample in two redshift bins and report no significant evolution with redshift. Lastly, changing the cosmology in the modelling impacts only slightly our results.

79 ASTRONOMY AND ASTROPHYSICS↗

Computational Study of Symmetric Methylation on Histone Arginine Catalyzed by Protein Arginine Methyltransferase PRMT5 through QM/MM MD and Free Energy Simulations

Protein arginine methyltransferases (PRMTs) catalyze the transfer of the methyl group from S-adenosyl-l-methionine (AdoMet) to arginine residues. There are three types of PRMTs (I, II and III) that produce different methylation products, including asymmetric dimethylarginine (ADMA), symmetric dimethylarginine (SDMA) and monomethylarginine (MMA). Since these different methylations can lead to different biological consequences, understanding the origin of product specificity of PRMTs is of considerable interest. In this article, the quantum mechanical/molecular mechanical (QM/MM) molecular dynamics (MD) and free energy simulations are performed to study SDMA catalyzed by the Type II PRMT5 on the basis of experimental observation that the dimethylated product is generated through a distributive fashion. The simulations have identified some important interactions and proton transfers during the catalysis. Similar to the cases involving Type I PRMTs, a conserved Glu residue (Glu435) in PRMT5 is suggested to function as general base catalyst based on the result of the simulations. Moreover, our results show that PRMT5 has an energetic preference for the first methylation on N-1 followed by the second methylation on a different -guanidino nitrogen of arginine (N-2).The first and second methyl transfers are estimated to have free energy barriers of 19-20 and 18-19 kcal/mol respectively. The computer simulations suggest a distinctive catalytic mechanism of symmetric dimethylation that seems to be different from asymmetric dimethylation.

ARABIDOPSIS↗

Extending the Utility of Space-Borne Snow Water Equivalent Observations Over Vegetated Areas With Data Assimilation

Snow is a vital component of the earth system, yet no snow-focused satellite remote sensing platform currently exists. In this study, we investigate how synthetic observations of snow water equivalent (SWE) representative of a synthetic aperture radar remote sensing platform could improve spatiotemporal estimates of snowpack. We use a fraternal twin observing system simulation experiment, specifically investigating how much snow simulated using widely used models and forcing data could be improved by assimilating synthetic observations of SWE. We focus this study across a 24° x 37° domain in the western USA and Canada, simulating snow at 250 m resolution and hourly time steps in water year 2019. We perform two data assimilation experiments, including (1) a simulation excluding synthetic observations in forests where canopies obstruct remote sensing retrievals and (2) a simulation inferring snow distribution in forested grid cells using synthetic observations from nearby canopy-free grid cells. Results found that, relative to a nature run, or assumed true simulation of snow evolution, assimilating synthetic SWE observations improved average SWE biases at maximum snowpack timing in shrub, grass, crop, bare-ground, and wetland land cover types from 14 %, to within 1 %. However, forested grid cells contained a disproportionate amount of SWE volume. In forests, SWE mean absolute errors at the time of maximum snow volume were 111 mm and average SWE biases were on the order of 150 %. Here the data assimilation approach that estimated forest SWE using observations from the nearest canopy-free grid cells substantially improved these SWE biases (18 %) and the SWE mean absolute error (27 mm). Simulations employing data assimilation also improved estimates of the temporal evolution of both SWE and runoff, even in spring snowmelt periods when melting snow and high snow liquid water content prevented synthetic SWE retrievals. In fact, in the Upper Colorado River region, melt-season SWE biases were improved from 63 % to within 1 %, and the Nash–Sutcliffe efficiency of runoff improved from −2.59 to 0.22. These results demonstrate the value of data assimilation and a snow-focused globally relevant remote sensing platform for improving the characterization of SWE and associated water availability.

Justin Pflug↗

Simulation of pseudo-CT images based on deformable image registration of ultrasound images: A proof of concept for transabdominal ultrasound imaging of the prostate during radiotherapy

Purpose: Imaging of patient anatomy during treatment is a necessity for position verification and for adaptive radiotherapy based on daily dose recalculation. Ultrasound (US) image guided radiotherapy systems are currently available to collect US images at the simulation stage (US{sub sim}), coregistered with the simulation computed tomography (CT), and during all treatment fractions. The authors hypothesize that a deformation field derived from US-based deformable image registration can be used to create a daily pseudo-CT (CT{sub ps}) image that is more representative of the patients’ geometry during treatment than the CT acquired at simulation stage (CT{sub sim}). Methods: The three prostate patients, considered to evaluate this hypothesis, had coregistered CT and US scans on various days. In particular, two patients had two US–CT datasets each and the third one had five US–CT datasets. Deformation fields were computed between pairs of US images of the same patient and then applied to the corresponding US{sub sim} scan to yield a new deformed CT{sub ps} scan. The original treatment plans were used to recalculate dose distributions in the simulation, deformed and ground truth CT (CT{sub gt}) images to compare dice similarity coefficients, maximum absolute distance, and mean absolute distance on CT delineations and gamma index (γ) evaluations on both the Hounsfield units (HUs) and the dose. Results: In the majority, deformation did improve the results for all three evaluation methods. The change in gamma failure for dose (γ{sub Dose}, 3%, 3 mm) ranged from an improvement of 11.2% in the prostate volume to a deterioration of 1.3% in the prostate and bladder. The change in gamma failure for the CT images (γ{sub CT}, 50 HU, 3 mm) ranged from an improvement of 20.5% in the anus and rectum to a deterioration of 3.2% in the prostate. Conclusions: This new technique may generate CT{sub ps} images that are more representative of the actual patient anatomy than the CT{sub sim} scan.

60 APPLIED LIFE SCIENCES↗

THE X-FACTOR IN GALAXIES. I. DEPENDENCE ON ENVIRONMENT AND SCALE

Characterizing the conversion factor between CO emission and column density of molecular hydrogen, X{sub CO}, is crucial in studying the gaseous content of galaxies, its evolution, and relation to star formation. In most cases the conversion factor is assumed to be close to that of giant molecular clouds (GMCs) in the Milky Way, except possibly for mergers and star-bursting galaxies. However, there are physical grounds to expect that it should also depend on the gas metallicity, surface density, and strength of the interstellar radiation field. The X{sub CO} factor may also depend on the scale on which CO emission is averaged due to effects of limited resolution. We study the dependence of X{sub CO} on gas properties and averaging scale using a model that is based on a combination of results of sub-parsec scale magnetohydrodynamic simulations and on the gas distribution from self-consistent cosmological simulations of galaxy formation. Our model predicts X{sub CO} Almost-Equal-To (2-4) Multiplication-Sign 10{sup 20} K{sup -1} cm{sup -2} km{sup -1} s, consistent with the Galactic value, for interstellar medium conditions typical for the Milky Way. For such conditions the predicted X{sub CO} varies by only a factor of two for gas surface densities in the range {Sigma}{sub H{sub 2}}{approx}50-500 M{sub sun}pc{sup -2}. However, the model also predicts that more generally on the scale of GMCs, X{sub CO} is a strong function of metallicity and depends on the column density and the interstellar UV flux. We show explicitly that neglecting these dependencies in observational estimates can strongly bias the inferred distribution of H{sub 2} column densities of molecular clouds to have a narrower and offset range compared to the true distribution. We find that when averaged on {approx}kiloparsec scales the X-factor depends only weakly on radiation field and column density, but is still a strong function of metallicity. The predicted metallicity dependence can be approximated as X{sub CO}{proportional_to}Z{sup -{gamma}} with {gamma} Almost-Equal-To 0.5-0.8.

79 ASTRONOMY AND ASTROPHYSICS↗

All-Atom Molecular Dynamics Study of Water–Dodecane Interface in the Presence of Octanol

In this work, classical atomistic molecular dynamics (MD) simulations were performed to investigate the structural properties of octanol at water/dodecane interface. Multiple combinations of simulation conditions and force fields were employed in order to :obtain high fidelity interfacial structure. The analysis of noncovalent interactions shows that the convergence of interfacial octanol distribution requires a simulation time scale larger than 100 ns. Finite size effect diminishes with increasing dimension of simulation box both laterally and vertically. In the largest simulated systems with vanishing finite size effect, the additive CHARMM force field shows similar interfacial aggregation behavior with the DRUDE polarizable model. Self-assembly of octanol molecules at water/oil interface is observed, expected to reduce;the free energy barrier between water phase and oil phase. This work provides an MD simulation benchmark for structural study of complex liquid/liquid interface with cosurfactant reducing interfacial tension between two immiscible phases.

Qiao, Baofu↗

VisIO: enabling interactive visualization of ultra-scale, time-series data via high-bandwidth distributed I/O systems

Petascale simulations compute at resolutions ranging into billions of cells and write terabytes of data for visualization and analysis. Interactive visuaUzation of this time series is a desired step before starting a new run. The I/O subsystem and associated network often are a significant impediment to interactive visualization of time-varying data; as they are not configured or provisioned to provide necessary I/O read rates. In this paper, we propose a new I/O library for visualization applications: VisIO. Visualization applications commonly use N-to-N reads within their parallel enabled readers which provides an incentive for a shared-nothing approach to I/O, similar to other data-intensive approaches such as Hadoop. However, unlike other data-intensive applications, visualization requires: (1) interactive performance for large data volumes, (2) compatibility with MPI and POSIX file system semantics for compatibility with existing infrastructure, and (3) use of existing file formats and their stipulated data partitioning rules. VisIO, provides a mechanism for using a non-POSIX distributed file system to provide linear scaling of 110 bandwidth. In addition, we introduce a novel scheduling algorithm that helps to co-locate visualization processes on nodes with the requested data. Testing using VisIO integrated into Para View was conducted using the Hadoop Distributed File System (HDFS) on TACC's Longhorn cluster. A representative dataset, VPIC, across 128 nodes showed a 64.4% read performance improvement compared to the provided Lustre installation. Also tested, was a dataset representing a global ocean salinity simulation that showed a 51.4% improvement in read performance over Lustre when using our VisIO system. VisIO, provides powerful high-performance I/O services to visualization applications, allowing for interactive performance with ultra-scale, time-series data.

97 MATHEMATICS AND COMPUTING↗

A Bivariate Mixed Distribution with a Heavy-tailed Component and its Application to Single-site Daily Rainfall Simulation

This paper presents an improved brivariate mixed distribution, which is capable of modeling the dependence of daily rainfall from two distinct sources (e.g., rainfall from two stations, two consecutive days, or two instruments such as satellite and rain gauge). The distribution couples an existing framework for building a bivariate mixed distribution, the theory of copulae and a hybrid marginal distribution. Contributions of the improved distribution are twofold. One is the appropriate selection of the bivariate dependence structure from a wider admissible choice (10 candidate copula families). The other is the introduction of a marginal distribution capable of better representing low to moderate values as well as extremes of daily rainfall. Among several applications of the improved distribution, particularly presented here is its utility for single-site daily rainfall simulation. Rather than simulating rainfall occurrences and amounts separately, the developed generator unifies the two processes by generalizing daily rainfall as a Markov process with autocorrelation described by the improved bivariate mixed distribution. The generator is first tested on a sample station in Texas. Results reveal that the simulated and observed sequences are in good agreement with respect to essential characteristics. Then, extensive simulation experiments are carried out to compare the developed generator with three other alternative models: the conventional two-state Markov chain generator, the transition probability matrix model and the semi-parametric Markov chain model with kernel density estimation for rainfall amounts. Analyses establish that overall the developed generator is capable of reproducing characteristics of historical extreme rainfall events and is apt at extrapolating rare values beyond the upper range of available observed data. Moreover, it automatically captures the persistence of rainfall amounts on consecutive wet days in a relatively natural and easy way. Another interesting observation is that the recognized ‘overdispersion’ problem in daily rainfall simulation ascribes more to the loss of rainfall extremes than the under-representation of first-order persistence. The developed generator appears to be a sound option for daily rainfall simulation, especially in particular hydrologic planning situations when rare rainfall events are of great importance.

Singh, Vijay P.↗

Non-Gaussian distribution of displacements for Lennard-Jones particles in equilibrium

Most mesoscale simulation methods assume Gaussian distributions of velocity-like quantities. These quantities are not true velocities, however, but rather time-averaged velocities or displacements of particles. Here, we show that there is a large range of coarse-graining scales where the assumption of a Gaussian distribution of these displacements fails, and a more complex distribution is required to adequately express these distribution functions of displacements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Molecular Dynamics Simulations of Amorphous Calcium Carbonate: Interpretation of Pair Distribution Function and X-Ray Absorption Spectroscopy Data

The structure and transformation of hydrous amorphous calcium carbonate (ACC) are key to understanding biomineralization pathways and their relationship with the properties of the resulting material. Quantitative interpretation of scattering experiments aimed at elucidating the structure of ACC is challenging, due to the amorphous nature of this material, and, therefore, requires models for the structure and the scattering physics. Here, we generate physically realistic ensembles of hydrated ACC structures and their vibrational disorder from ab initio molecular dynamics (AIMD) simulations with an emphasis on enabling the consistent interpretation of the finer details of three complementary structural probes: neutron and x-ray pair distribution experiments and x-ray absorption spectroscopy (XAS). In each case, we simulate the signal directly in reciprocal space and then manipulate it into the real-space pair distribution function (PDF) or spectrum using the same procedures for the experimental and theoretical data. Good agreement with experiment was obtained across the three techniques with the simulations accounting well for all features in the spectra. Remaining small discrepancies pointed to differences between real samples and the idealized simulated systems such as deviations from the nominal CaCO3·nH2O stoichiometry. Additionally, the simulations offered a more accurate description of the local coordination environment of calcium than previous shell-by-shell fits to spectra of synthetic ACC and classical molecular dynamics simulations. This work demonstrates that AIMD is a powerful approach for extracting detailed structural information from neutron PDF, x-ray PDF, and XAS of amorphous carbonate phases.

Prange, Micah P.↗

The X-factor in Galaxies: I. Dependence on Environment and Scale

Characterizing the conversion factor between CO emission and column density of molecular hydrogen, X{sub CO}, is crucial in studying the gaseous content of galaxies, its evolution, and relation to star formation. In most cases the conversion factor is assumed to be close to that of giant molecular clouds (GMCs) in the Milky Way, except possibly for mergers and star-bursting galaxies. However, there are physical grounds to expect that it should also depend on the gas metallicity, surface density, and strength of the interstellar radiation field. The X{sub CO} factor may also depend on the scale on which CO emission is averaged due to effects of limited resolution. We study the dependence of X{sub CO} on gas properties and averaging scale using a model that is based on a combination of results of sub-pc scale magneto-hydrodynamic simulations and on the gas distribution from self-consistent cosmological simulations of galaxy formation. Our model predicts X{sub CO} {approx} 2 - 4 x 10{sup 20} K{sup -1} cm{sup -2} km{sup -1} s, consistent with the Galactic value, for interstellar medium conditions typical for the Milky Way. For such conditions the predicted X{sub CO} varies by only a factor of two for gas surfaced densities in the range {Sigma}{sub H{sub 2}} {approx} 50-500 M{sub {circle_dot}} pc{sup -2}. However, the model also predicts that more generally on the scale of GMCs, X{sub CO} is a strong function of metallicity, and depends on the column density and the interstellar UV flux. We show explicitly that neglecting these dependencies in observational estimates can strongly bias the inferred distribution of H2 column densities of molecular clouds to have a narrower and offset range compared to the true distribution. We find that when averaged on {approx} kpc scales the X-factor depends only weakly on radiation field and column density, but is still a strong function of metallicity. The predicted metallicity dependence can be approximated as X{sub CO} {proportional_to} Z{sup -{gamma}} with {gamma} {approx} 0.5 - 0.8.

08 HYDROGEN↗

Modeling global lightning distributions in a general circulation model

A general circulation model (GCM) is used to model global lightning distributions and frequencies. Both total and cloud-to-ground lightning frequencies are modeled using parameterizations that relate the depth of convective clouds to lightning frequencies. The model's simulations of lightning distributions in time and space show good agreement with available observations. The model's annual mean climatology shows a global lightning frequency of 77 flashes per second, with cloud-to-ground lightning making up 25% of the total. The maximum lightning activity in the GCM occurs during the Northern Hemisphere summer, with approximately 91% of all lightning occurring over continental and coastal regions.

Price, Colin↗