Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

The Ponta Grossa Arch: A proposal for ts configuration and evolution from the interpretation of remote sensing data

Visual analysis of MSS imagery was used to construct a map of dikes in a wide area of the Ponta Grossa Arch both in the Parana Basin and its basement. Analysis of the map by photographic methods defined the zone of highest density of the dikes, and some aspects of the longitudinal and transverse heterogeneities, as well as localized the apex of the Arch. Borders of the Arch were also suggested. Field investigations confirmed the position of the apex of the flexure on Palezoic sediments and pre-lava Mesozoic sediments. Controversial aspects of the relative absence of dikes in certain units or lithologies and the composition of intrusions surrounding the city of Castro were observed. The apparent synchronism between the activity of the Parana Basin and the Arch is discussed as well as the frequent inverse characteristics of vertical movements. The similarity of rocks in Brazil and Africa is also considered.

Parada, N. D. J.↗

Introductory aerothermodynamics of advanced space transportation systems

An assessment is made of the severity of the physical phenomena affecting the aerothermodynamics of advanced space transportation system hypervelocity flights at low ambient density, and flight domains corresponding to these phenomena are mapped. The development of advanced computational codes that will be needed when approximate conceptual studies have defined advantageous configurations is discussed. The advanced space transportation systems considered are an aeroassisted orbital transfer vehicle and a small, rapid response maneuverable craft which is launched either from earth or a conventional aircraft, assumes near-earth orbit, and finally reenters with lift and cross range capability to land on an airstrip.

Howe, J. T.↗

Voyager 1 and 2 Atlas of Six Saturnian Satellites

Maps, compiled with data gathered primarily by Voyager 1 and 2 spacecraft, are presented which show the diversity among six of the Saturnian moons. Mimas and Enceladus are mapped in detail. Prelimary maps are given for the other four satellites. Diameter, density, albedo, and distance from mother planet, among much more data, is given for each moon.

Batson, R. M.↗

High angular resolution infrared mapping of the compact H II regions W51 and DR 21/W75

Far-infrared maps of W51/G49.5-0.4, W51/G49.4-0.3, and the DR 21 W75 S regions are presented. The simultaneous 50 and 100 micron maps enable a determination of the dust temperature and density structure in these areas. In G49.5-0.4 a luminosity and dust column-density peak at the position of the W51-Main maser is found, suggesting that this is the dominant luminosity source in W51. In G49.4-0.3 three components associated with the three known 2.7 GHz sources are resolved. A comparison of the total far-infrared luminosity with the radio continuum brightness in both G49.5-0.4 and G49.4-0.3 shows that the ratio of Lyman continuum to total luminosity of the exciting stars in not consistent with excitation by a single ZAMS star if most of the Lyman continuum photons are being absorbed bay gas rather than dust. In DR 21 micron far-infrared data and some new 2-20 micron results reveal a region of hot dust associated with the 2 micron H2 emission to the east and west of DR 21. Finally, a new 1.5-100 micron 'protostellar' source 2 deg north of W75 S at the position of a 1 mm continuum peak is reported.

Harvey, P. M.↗

Analytical caustic surfaces

This document discusses the determination of caustic surfaces in terms of rays, reflectors, and wavefronts. Analytical caustics are obtained as a family of lines, a set of points, and several types of equations for geometries encountered in optics and microwave applications. Standard methods of differential geometry are applied under different approaches: directly to reflector surfaces, and alternatively, to wavefronts, to obtain analytical caustics of two sheets or branches. Gauss/Seidel aberrations are introduced into the wavefront approach, forcing the retention of all three coefficients of both the first- and the second-fundamental forms of differential geometry. An existing method for obtaining caustic surfaces through exploitation of the singularities in flux density is examined, and several constant-intensity contour maps are developed using only the intrinsic Gaussian, mean, and normal curvatures of the reflector. Numerous references are provided for extending the material of the present document to the morphologies of caustics and their associated diffraction patterns.

Schmidt, R. F.↗

A Preliminary Investigation of Hall Thruster Technology

A three-year NASA/BMDO-sponsored experimental program to conduct performance and plume plasma property measurements on two Russian Stationary Plasma Thrusters (SPTs) has been completed. The program utilized experimental facilitates at the University of Michigan's Plasmadynamics and Electric Propulsion Laboratory (PEPL). The main features of the proposed effort were as follows: (1) Characterized Hall thruster (and arcjet) performance by measuring ion exhaust velocity with probes at various thruster conditions; (2) Used a variety of probe diagnostics in the thruster plume to measure plasma properties and flow properties including T(sub e) and n(sub e) ion current density and ion energy distribution, and electric fields by mapping plasma potential; (3) Used emission spectroscopy to identify species within the plume and to measure electron temperatures. A key and unique feature of our research was our collaboration with Russian Hall thruster researcher Dr. Sergey A Khartov, Deputy Dean of International Relations at the Moscow Aviation Institute (MAI). His activities in this program included consulting on and participation in research at PEPL through use of a MAI-built SPT and ion energy probe.

Gallimore, Alec D.↗

A Preliminary Investigation of Hall Thruster Technology

A three-year, NASA/BMDO-sponsored experimental program to conduct performance and plume plasma property measurements on two Russian Stationary Plasma Thrusters (SPTs) has been completed. The program utilized experimental facilitates at the University of Michigan's Plasmadynamics and Electric Propulsion Laboratory (PEPL). The main features of the proposed effort were as follows: We Characterized Hall thruster [and arcjet] performance by measuring ion exhaust velocity with probes at various thruster conditions. Used a variety of probe diagnostics in the thruster plume to measure plasma properties and flow properties including T(sub e) and n(sub e), ion current density and ion energy distribution, and electric fields by mapping plasma potential. Used emission spectroscopy to identify species within the plume and to measure electron temperatures.

Gallimore, Alec D.↗

Controlling Fringe Sensitivity of Electro-Optic Holography Systems Using Laser Diode Current Modulation

Electro-Optic Holography (EOH) is a non-intrusive, laser-based, displacement measurement technique capable of static and dynamic displacement measurements. EOH is an optical interference technique in which fringe patterns that represent displacement contour maps are generated. At excessively large displacements the fringe density may be so great that individual fringes are not resolvable using typical EOH techniques. This thesis focuses on the development and implementation of a method for controlling the sensitivity of the EOH system. This method is known as Frequency Translated Electro-Optic Holography (FTEOH). It was determined that by modulating the current source of the laser diode at integer multiples of the object vibration, the fringe pattern is governed by higher order Bessel function of the first kind and the number of fringes that represent a given displacement can be controlled. The reduction of fringes is theoretically unlimited but physically limited by the frequency bandwidth of the signal generator, providing modulation to the laser diode. Although this research technique has been verified theoretically and experimentally in this thesis, due to the current laser diode capabilities it is a tedious and time consuming process to acquire data using the FTEOH technique.

Bybee, Shannon J.↗

The Geology of the Pluto System

NASA's New Horizons mission acquired a large set of images and other data making possible thorough geological analysis of landscapes in the Pluto System. Pluto and Charon exhibit strikingly different surface appearances, despite their similar densities and presumed bulk compositions. Systematic investigation, modelling and mapping revealed that much of Pluto's surface is attributed to surface-atmosphere interactions and the mobilization of volatile ices by insolation. Many mapped valley systems appear to be the consequence of glaciation involving nitrogen ice. Other geological activity requires or required long periods of internal heating, such as Pluto's extensive tectonic fabric. The convection and advection of volatile ices in Sputnik Planitia are thought to be powered by present-day radiogenic heat loss. The prominent mountains at the western margin of Sputnik Planitia, and the strange, multi-km-high mound features to the south, probably composed of H2O, are young geologically as inferred by light cratering and superposition relationships. These multi-km-high mound features might be cryo-volcanoes. Their origin, and what drove their formation so late in Solar System history, is under investigation. East of Sputnik Planitia are large fields of aligned ranks of sharp-crested ridges found only at high altitude that are apparently composed of massive deposits of CH4 ice, referred to as Bladed Terrain. New Horizons found evidence that Bladed Terrain may cover much of Pluto's low latitudes and may have originally formed there as a consequence of Pluto's very high obliquity. Currently Bladed Terrain is undergoing net erosion. This observation, along with evidence for formally more extensive nitrogen glaciation implies that Pluto undergoes significant climate evolution. The dynamic remolding of landscapes by volatile transport seen on Pluto is not unambiguously evident in the mapping of Charon. Charon does, however, display a large resurfaced plain and globally engirdling extensional tectonic network attesting to its early endogenic vigor.

Moore, J. M.↗

Fast Machine Learning Lidar Surrogate Simulator: Pristine Clear Sky

The simulations of lidar signals and retrievals rely on a range of optic-physical models, such as radiative transfer models, particle scattering and absorption models, along with the output data from atmospheric physical models. Integrating these different models to represent signals of a lidar system is computationally expensive, and performing backward retrievals can be complex and ambiguous. However, with the advantages of Machine Learning, there is a new potential for building effective lidar signal database linked to corresponding atmospheric profiles. For this project, we are developing a fast pre-trained neural network as the lidar surrogate simulator using simulated data for a CALIPSO-like lidar (355 nm, 532nm, and 1064nm), and a CO2 differential absorption lidar (DIAL) near 1571nm. Specifically, we utilize a long short-term memory (LSTM) model to map the relationships between atmospheric profiles (pressure, temperature, air density and CO2 mixing ratio) and lidar signals. This approach allows us to build machine learning based simulators that can reconstruct lidar signals at specific bands from MERRA reanalysis data, and perform retrievals of atmospheric profiles using lidar signals at various wavelengths. As a first step, the results show the potential of this method to establish a foundational model for sensor signals. This model offers the promise of enabling both accurate predictions and rapid retrievals, providing a more efficient approach to signal processing and analysis.

Shan Zeng↗

CyGutz

This software is an efficient computational package of the Gutzwiller variational method. It solves the Gutzwiller variational problem for general multiband models with arbitrary on-site interaction in a fully self-consistent numerical approach. The underlying algorithm drastically reduces the problem of the high-dimensional Gutzwiller minimization by mapping it to a minimization only in the variational density matrix. For fixed density the Gutzwiller renormalization matrix is determined as a fix-point of a proper functional, whose evaluation requires only ground-state calculations of matrices defined in the Gutzwiller variational space. Furthermore, the package is able to account for the symmetries of the variational function in a controlled way, reducing the number of variational parameters. The software is highly efficient and robust, and is particularly suitable for first-principles studies (e.g., in combination with DFT) of many complex real materials, where the full intra-atomic interaction is important to obtain correct results.

Yao, Yongxin↗

Converging towards atomic and nuclear pressures (Final Report)

his report details the development of transformational tools and techniques, allowing the accurate characterization of matter at the most extreme conditions yet studied in the high energy density (HED) domain. Before this work, most experiments quantitatively mapping the nature of matter in the HED realm were performed using planar geometry, which allows for the isolation and measurement of variables in a single thermodynamic state. Such measurements include equation of state variables, optical conductivity, heat transport and more. However, due to a variety of plasma processes, such experiments are limited to below ~10 TPa (100 Mbar) pressures. To achieve higher pressures, convergent experiments are needed. Historically, convergent experiments have not been used for benchmark data because they are integral measurements. That is each part of a convergent target undergoes a time dependent wide range of states, making it difficult to accurately isolate any particular quantity for a given thermodynamic state. This effort developed innovative convergent HED platforms and techniques enabling the exploration of matter from atomic to nuclear scale pressures. This effort also performed pioneering experiments that yielded the first rigorous benchmark data at these extreme conditions. This funding award began with the overarching goal to understand the behavior of matter at extreme (atomic-to-nuclear scale) pressures. The motivation for these goals lie in the fact that every time scientists explore matter beyond the threshold of an atomic unit, there is a fundamental shift in science. The atomic unit for energy, mass, charge, length, and time have each been explored, and each time such a threshold was crossed, a new sequence of discoveries was made resulting in significant awards such as the Nobel Prize. The only unexplored atomic unit is pressure, and this effort set the course for exploring matter at and beyond such pressures. That most of the recently discovered extrasolar planets and stars, as well as matter in the late implosion stages of inertial fusion targets, have deep internal pressures at and beyond atomic pressures amplifies the importance of this effort. Much of the initial work in developing techniques to create these atomic-to-nuclear pressures already existed within the HED community, predominantly at large scale laser facilities such as the National Ignition Facility (NIF) and the Omega60 laser the University of Rochester and although these experiments were routinely performed the ability to extract information about the underlying physical states and processes remained elusive due to the complexity of the experiments, extreme scales in both time and space, and the integrated nature of all the measurements. This work built a rigorous framework so such measurements can routinely be made. This was done in part through the introduction of Bayesian inference techniques into the field of HED science. These techniques allow for the self-consistent extraction of the relevant variables and their explicit and implicit correlations, so as to make use of integrated experimental data to constrain physical models and provide accurate uncertainty bounds for the data. The techniques developed here are fully transparent and proved immediately useful providing quantitative rigorous benchmarks for physical states and processes at some of the most extreme conditions yet explored on Earth. This funding is directly or partly responsible for 7 publications in major peer-reviewed scientific journals, a doctoral thesis, 3 invited talks at major conferences, and the training of a post-doc, 2 graduate students, and 1 undergraduate student. Beyond the effort supported by this award launched the introduction of Bayesian inference into the HED physics community and helped push the usage if modern data-science techniques within the physics community at large.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cationic and Anionic Redox of Battery Cathodes Investigated by Advanced Synchrotron‐Based Mapping of Resonant Inelastic X‐ray Scattering

Abstract Redox reaction builds the foundation stone for the energy density of rechargeable battery cathodes. Probing and understanding the redox reaction behavior is crucial, but also extremely formidable, which requires individual and reliable detection of cationic and anionic redox states. Fortunately, the recently developed ultra‐high‐efficiency mapping of resonant inelastic X‐ray scattering (mRIXS) has emerged as a powerful tool to probe the battery chemistry states. Here, the latest advances of employing advanced mRIXS is summarized to investigate the cationic and anionic redox mechanism of battery cathodes during electrochemical operation. Owing to the new dimension of information along the emission energy and high sensitivity to valence 3d states, 3d transition‐metal L ‐edge (TM‐ L ) mRIXS can eliminate the lineshape distortion in conventional 3d TM‐ L fluorescence X‐ray absorption spectra and investigate the cationic redox quantitatively. Moreover, O‐ K mRIXS could fingerprint the intrinsic oxidized lattice oxygen states and quantify the oxygen redox (OR) reversibility, thus demystifying the controversy in traditional wisdom. In addition, different modification strategies coupled with underlying mechanisms for regulating the activity and reversibility of OR utilizing mRIXS are also summarized. This review provides valuable guidance for further exploration of underlying reaction mechanisms of battery cathodes by mRIXS, along with both technological and scientific improvements.

Cheng, Chen↗

Corotating solar wind structures and recurrent trains of enhanced diurnal variation in galactic cosmic rays

Data from the Princess Sirindhorn Neutron Monitor at Doi Inthanon, Thailand, with a vertical cutoff rigidity of 16.8 GV, were utilized to determine the diurnal anisotropy (DA) of Galactic cosmic rays (GCRs) near Earth during solar minimum conditions between 2007 November and 2010 November. We identified trains of enhanced DA over several days, which often recur after a solar rotation period (∼27 days). By investigating solar coronal holes as identified from synoptic maps and solar wind parameters, we found that the intensity and anisotropy of cosmic rays are associated with the high-speed streams (HSSs) in the solar wind, which are in turn related to the structure and evolution of coronal holes. An enhanced DA was observed after the onset of some, but not all, HSSs. During time periods of recurrent trains, the DA was often enhanced or suppressed according to the sign of the interplanetary magnetic field B, which suggests a contribution from a mechanism involving a southward gradient in the GCR density, n, and a gradient anisotropy along B × ∇n. In one non-recurrent and one recurrent sequence, an HSS from an equatorial coronal hole was merged with that from a trailing mid-latitude extension of a polar coronal hole, and the slanted HSS structure in space with suppressed GCR density can account for the southward GCR gradient. We conclude that the gradient anisotropy is a source of temporary changes in the GCR DA under solar minimum conditions, and that the latitudinal GCR gradient can sometimes be explained by the coronal hole morphology.

79 ASTRONOMY AND ASTROPHYSICS↗

Structure-property maps and optimal inversion in configurational thermodynamics

Cluster expansions of first-principles density-functional databases in multicomponent systems are now used as a routine tool for the prediction of zero- and finite-temperature physical properties. The ability of producing large databases of various degrees of accuracy, i.e., high-throughput calculations, makes pertinent the analysis of error propagation during the inversion process. This is a very demanding task as both data and numerical noise have to be treated on equal footing. We have addressed this problem by using an analysis that combines the variational and evolutionary approaches to cluster expansions. Simulated databases were constructed ex professo to sample the configurational space in two different and complementary ways. These databases were in turn treated with different levels of both systematic and random numerical noise. The effects of the cross-validation level, size of the database, type of numerical imprecisions on the forecasting power of the expansions were extensively analyzed. We found that the size of the database is the most important parameter. Upon this analysis, we have determined criteria for selecting the optimal expansions, i.e., transferable expansions with constant forecasting power in the configurational space (a structure-property map). As a by-product, our study provides a detailed comparison between the variational cluster expansion and the genetic-algorithm approaches.

97 MATHEMATICS AND COMPUTING↗

G0.253+0.016: A centrally condensed, high-mass protocluster

Despite their importance as stellar nurseries and the building blocks of galaxies, very little is known about the formation of the highest mass clusters. The dense clump G0.253+0.016 represents an example of a clump that may form an Arches-like, high-mass cluster. Here we present molecular line maps toward G0.253+0.016 taken as part of the MALT90 molecular line survey, complemented with APEX observations. Combined, these data reveal the global physical properties and kinematics of G0.253+0.016. Recent Herschel data show that while the dust temperature is low (∼19 K) toward its center, the dust temperature on the exterior is higher (∼27 K) due to external heating. Our new molecular line data reveal that, overall, the morphology of dense gas detected toward G0.253+0.016 matches its IR extinction and dust continuum emission very well. An anticorrelation between the dust and gas column densities toward its center indicates that the clump is centrally condensed with a cold, dense interior in which the molecular gas is chemically depleted. The velocity field shows a strong gradient along the clump's major axis, with the blueshifted side at a higher Galactic longitude. The optically thick gas tracers are systematically redshifted with respect to the optically thin and hot gas tracers, indicating radial motions. The gas kinematics and line ratios support the recently proposed scenario in which G0.253+0.016 results from a tidal compression during a recent pericenter passage near Sgr A*. Because G0.253+0.016 represents an excellent example of a clump that may form a high-mass cluster, its detailed study should reveal a wealth of knowledge about the early stages of cluster formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Remote sensing of soils, land forms, and land use in the northern Great Plains in preparation for ERTS applications

Research to determine the optimum time or season for obtaining imagery to identify and map soil limitations was conducted in the proposed Oahe irrigation project area in South Dakota. The optimum time for securing photographs or imagery is when the soil surface patterns are most apparent. For cultivated areas similar to the study area, May is the optimum time. The density slicing analysis of the May image provided additional and more accurate information than did the existing soil map. The soil boundaries were more accurately located. The use of a density analysis system for an operational soil survey has not been tested, but is obviously dependent upon securing excellent photographs for interpretation. The colors or densities of photographs will have to be corrected for sun angle effects, vignetting effects, and processing to have maximum effectiveness for mapping soil limitations. Rangeland sites were established in Bennett County, South Dakota to determine the usefulness of ERTS imagery. Imagery from these areas was interpreted for land use and drainage patterns.

Frazee, C. J.↗

Growth and structure of K{sub 2}Ni{sub x}Co{sub (1–x)}(SO{sub 4}){sub 2} · 6H{sub 2}O single crystals

Single crystals of the K{sub 2}Ni{sub x}Co{sub (1–x)}(SO{sub 4}){sub 2} · 6H{sub 2}O composition are grown by spontaneous flux crystallization. More exact chemical formulas of the single crystals are determined based on the diffraction data as K{sub 2}Co(SO{sub 4}){sub 2} · 6H{sub 2}O (I), K{sub 2}(Co{sub 0.657}Ni{sub 0.343})(SO{sub 4}){sub 2} · 6H{sub 2}O (II), K{sub 2}(Co{sub 0.226}Ni{sub 0.774})(SO{sub 4}){sub 2} · 6H{sub 2}O (III), K{sub 2}(Co{sub 0.216}Ni{sub 0.784})(SO{sub 4}){sub 2} · 6H{sub 2}O (IV), and K{sub 2}Ni(SO{sub 4}){sub 2} · 6H{sub 2}O (V). The substitution of nickel atoms for cobalt atoms in structure I results in a shortening of all (Co,Ni)–O interatomic distances. With increasing Ni concentration, the (Co,Ni)–O2 distance shortens to a lesser degree than the (Co,Ni)–O1 and (Co,Ni)–O3 distances and, as a consequence, the distortion of (Co,Ni)O{sub 6} octahedra decreases. NiO{sub 6} polyhedra are less distorted than CoO{sub 6} octahedra. The analysis of difference syntheses of electron density shows that the number of uninterpretable peaks on the maps of mixed crystals II, III, and IV, as well as on the map of K{sub 2}Co(SO{sub 4}){sub 2} · 6H{sub 2}O, is larger with respect to those of structure K{sub 2}Ni(SO{sub 4}){sub 2} · 6H{sub 2}O.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗