Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data needs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Comparison of icing cloud instruments for 1982-1983 icing season flight program

A number of modern and old style liquid water content (LWC) and droplet sizing instruments were mounted on a DeHavilland DHC-6 Twin Otter and operated in natural icing clouds in order to determine their comparative operating characteristics and their limitations over a broad range of conditions. The evaluation period occurred during the 1982-1983 icing season from January to March 1983. Time histories of all instrument outputs were plotted and analyzed to assess instrument repeatability and reliability. Scatter plots were also generated for comparison of instruments. The measured LWC from four instruments differed by as much as 20 percent. The measured droplet size from two instruments differed by an average of three microns. The overall effort demonstrated the need for additional data, and for some means of calibrating these instruments to known standards.

Ide, R. F.↗
NASA NTRS1983

Impact of thematic mapper sensor characteristics on classification accuracy

A three factor (spectral, spatial, and radiometric resolution), two level (TM and MSS) analysis of variance (ANOVA) approach allowed evaluation of the effects of each factor individually and in all possible combinations. Digital classification accuracy was used as the figure of merit. Nine study sites in Washington, DC, each of approximately 256 x 256 TM pixels, were randomly selected from the full scene for analysis. These results strongly suggest that the quantization level improvements and the addition of new spectral bands in the visible and middle IR regions (both afforded by the TM sensor design) can result in improved capabilities to accurately delineate land cover categories using a per point Gaussian maximum likelihood classifier. On the other hand, results indicate that the increase in spatial resolution to 30 m does not significantly enhance classification accuracy. The spatial result points to an inherent limitation of a per point classifier and to the need to improve data analysis techniques to handle high spatial resolution data.

Williams, D. L.↗
NASA NTRS1985

Rotor wake characteristics of a transonic axial flow fan

State of the art turbomachinery flow analysis codes are not capable of predicting the viscous flow features within turbomachinery blade wakes. Until efficient 3D viscous flow analysis codes become a reality there is therefore a need for models which can describe the generation and transport of blade wakes and the mixing process within the wake. To address the need for experimental data to support the development of such models, high response pressure measurements and laser anemometer velocity measurements have been obtained in the wake of a transonic axial flow fan rotor.

Hathaway, M. D.↗
NASA NTRS1985

Geopotential Research Mission (GRM)

The Geopotential Research Mission (GRM) is a satellite system proposed to determine variations in the gravitational and magnetic fields to a resolution of about 100 kilometers. Knowledge and interpretations of the potential fields on scales of 100 kilometers and greater, to clarify the needs for better data in this range of wavelengths were reviewed. The potential contribution of these data to the determination, by satellite altimetry, of a more accurate geoidal reference was discussed.

Source record↗
NASA NTRS1985

Rotor wake characteristics of a transonic axial flow fan

State of the art turbomachinery flow analysis codes are not capable of predicting the viscous flow features within turbomachinery blade wakes. Until efficient 3D viscous flow analysis codes become a reality there is therefore a need for models which can describe the generation and transport of blade wakes and the mixing process within the wake. To address the need for experimental data to support the development of such models, high response pressure measurements and laser anemometer velocity measurements were obtained in the wake of a transonic axial flow fan rotor.

Hathaway, M. D.↗
NASA NTRS1984

Atmospheric effects on remote sensing of surface reflectance

This paper reviews the atmospheric effects on remote sensing of surface reflectance. The scattering and absorption of sunlight by atmospheric molecules and aerosols affects the quality of images of the surface remotely sensed from satellites and aircrafts. The concentration and characteristics of the atmospheric aerosols vary from place to place and vary with time. The effect of atmospheric aerosols on the upward radiance depends on their optical thickness, scattering phase function and absorption. These parameters result from the aerosol concentration, composition, and the relative humidity. For high resolution images the aerosol scale height is also of importance. The radiative transfer theory that predicts the atmospheric radiances for a given surface and atmosphere is a well established theory for the case of uniform surfaces (or low resolution data). Some radiative transfer models exist for nonuniform surfaces and others are being developed. Recent field experiment and laboratory simulation data confirm the need for these models and can be used for their testing. It is shown that the atmospheric effect reduces the apparent resolution of satellite imagery and causes errors in the classification of surface fields. Suggestions for correction procedures are given. Such corrections can be based on ground observations, on satellite radiances above dark areas, or on climatologic information, depending on the accuracy of the corrections needed. The chosen correction algorithm depends also on the image resolution and the specific remote sensing application.

Kaufman, Y. J.↗
NASA NTRS1986

Astrometric Telescope Facility - Status report

The advent of the Space Station Program has provided an unexpected opportunity for the Astrometric Telescope Facility (ATF) study program by providing a potential long-duration on-orbit serviceable platform. It required a concept change for ATF from a free-flyer observatory to a Space-Station-based Observatory. The program was sent in this new direction at the start of fiscal year 1985, and program plans including study schedules and science and technical requirements are being revised and defined. The facility is designed to be versatile and capable of fulfilling the primary goal of planet detection, and to be highly useful for other astrophysics observations. Basically the ATF observing program is a long-duration plan requiring repetitive observations of single stars over a one to two decade period. These repetitive observations are needed to provide data necessary to conclusively determine the existence (or nonexistence) of planets of the Uranus and Neptune class in extrasolar planetary systems.

Nishioka, K.↗
NASA NTRS1986

Titan Probe navigation analysis

In the proposed Cassini mission, a combined Saturn Orbiter/Titan Probe spacecraft will be launched from the Space Shuttle to arrive at Saturn around 2002, by means of a delta-VEGA trajectory. After Saturn-orbit insertion and a pericrone raise maneuver, the probe will be released to enter the Titan atmosphere and impact onto its surface. During its descent phase and impact onto Titan, the probe will maintain radio contact with the orbiter. Since the Titan-probe experimental phase lasts for only about four hours, probe-orbiter geometry and probe-delivery accuracy are critical to successful completion of this part of the mission. From a preliminary navigation analysis for probe delivery accuracy, it seems feasible to deliver the probe within 50 km (1-sigma value) of the desired aim-point in the Titan B-plane. The covariance study, however, clearly indicates the need for optical data, in addition to radio metric data. A Monte Carlo study indicates that a Delta-V capability of 98 m/sec for trajectory correction maneuvers will be sufficient to cover 99 percent of all contingencies during the segment from Saturn-orbit insertion to Titan-probe release.

Vijayaraghavan, A.↗
NASA NTRS1987

Photoabsorption and photodissociation of molecules important in the interstellar medium

A windowless apparatus was constructed and used to measure the photoabsorption and fluorescence cross sections of molecules in the extreme ultraviolet region. Photoabsorption and fluorescence cross sections of H2O, D2O, H2S, D2s, and Co were measured in the 50 to 200 nm region. These quantitative data are currently needed for the determination of the formulation and destruction rates of molecules in the interstellar medium.

Lee, Long C.↗
NASA NTRS1987

A parallel simulated annealing algorithm for standard cell placement on a hypercube computer

A parallel version of a simulated annealing algorithm is presented which is targeted to run on a hypercube computer. A strategy for mapping the cells in a two dimensional area of a chip onto processors in an n-dimensional hypercube is proposed such that both small and large distance moves can be applied. Two types of moves are allowed: cell exchanges and cell displacements. The computation of the cost function in parallel among all the processors in the hypercube is described along with a distributed data structure that needs to be stored in the hypercube to support parallel cost evaluation. A novel tree broadcasting strategy is used extensively in the algorithm for updating cell locations in the parallel environment. Studies on the performance of the algorithm on example industrial circuits show that it is faster and gives better final placement results than the uniprocessor simulated annealing algorithms. An improved uniprocessor algorithm is proposed which is based on the improved results obtained from parallelization of the simulated annealing algorithm.

Jones, Mark Howard↗
NASA NTRS1986

Comparisons of FGGE IIb and IIIb winds in a tropical synoptic system

The ECMWF wind analysis of a moisture burst over the NE Pacific Ocean occurring during a 9-day period in January 1979 is discussed. The availability of the data in synoptically active regions, and the horizontal, vertical, and temporal correlations of the data are considered. The accuracy of the wind data and the divergence in the tropics are examined. It is noted that it is necessary to maximize wind accuracy, and procedures for relating divergence to synoptic activity and satellite imagery to data correction are needed.

Mcguirk, J. P.↗
NASA NTRS1988

Photoabsorption and phototdissociation of molecules important in the interstellar medium

The photoabsorption and photodissociation cross sections of interstellar molecules and radicals were measured in the 90 to 200 nm region using synchrotron radiation, F sub 2 laser, excimer lasers, and discharge lamps as light sources. These data are currently needed for determining the formation and destruction rates of molecules and radicals by the interstellar radiation field.

Lee, Long C.↗
NASA NTRS1988

Design and implementation of parallel multigrid algorithms

Techniques for mapping multigrid algorithms to solve elliptic PDEs on hypercube parallel computers are described and demonstrated. The need for proper data mapping to minimize communication distances is stressed, and an execution-time model is developed to show how algorithm efficiency is affected by changes in the machine and algorithm parameters. Particular attention is then given to the case of coarse computational grids, which can lead to idle processors, load imbalances, and inefficient performance. It is shown that convergence can be improved by using idle processors to solve a new problem concurrently on the fine grid defined by a splitting.

Chan, Tony F.↗
NASA NTRS1988

Hypersonic drone design: A multidisciplinary experience

Efforts were focused on design problems of an unmanned hypersonic vehicle. It is felt that a scaled hypersonic drone is necessary to bridge the gap between present theory on hypersonics and the future reality of the National Aerospace Plane (NASP) for two reasons: to fulfill a need for experimental data in the hypersonic regime, and to provide a testbed for the scramjet engine which is to be the primary mode of propulsion for the NASP. Three areas of great concern to NASP design were examined: propulsion, thermal management, and flight systems. Problem solving in these areas was directed towards design of the drone with the idea that the same design techniques could be applied to the NASP. A seventy degree swept double delta wing configuration, developed in the 70's at NASA Langley, was chosen as the aerodynamic and geometric model for the drone. This vehicle would be air-launched from a B-1 at Mach 0.8 and 48,000 feet, rocket boosted by two internal engines to Mach 10 and 100,000 feet, and allowed to cruise under power of the scramjet engine until burnout. It would then return to base for an unpowered landing. Preliminary energy calculations based upon the flight requirements give the drone a gross launch weight of 134,000 lb. and an overall length of 85 feet.

Source record↗
NASA NTRS1989

Laser holographic interferometric measurements of the flow in a scramjet inlet at Mach 4

The need for quantitative data is addressed by laser holographic interferometry (LHI) by efficiently recording and reducing high resolution density data. This paper investigates the potential to get quantitative data from an interferogram created from two separate holographic plates. THe LHI measurements were made on a scramjet inlet at Mach 4. LHI successfully generated results for both internal and external flows, and demonstrated its ability to map entire flow fields. Of the three data reduction techniques used, the four-bucket method gave better results than the three-bucket or three-by-three methods. This technique requires high quality holograms as well as a good resolution in the digital images to produce good data.

Mcarthur, J. Craig↗
NASA NTRS1990

Parallel simulated annealing algorithms for cell placement on hypercube multiprocessors

Two parallel algorithms for standard cell placement using simulated annealing are developed to run on distributed-memory message-passing hypercube multiprocessors. The cells can be mapped in a two-dimensional area of a chip onto processors in an n-dimensional hypercube in two ways, such that both small and large cell exchange and displacement moves can be applied. The computation of the cost function in parallel among all the processors in the hypercube is described, along with a distributed data structure that needs to be stored in the hypercube to support the parallel cost evaluation. A novel tree broadcasting strategy is used extensively for updating cell locations in the parallel environment. A dynamic parallel annealing schedule estimates the errors due to interacting parallel moves and adapts the rate of synchronization automatically. Two novel approaches in controlling error in parallel algorithms are described: heuristic cell coloring and adaptive sequence control.

Banerjee, Prithviraj↗
NASA NTRS1989

Radiation Effects on Flow Characteristics in Combustion Chambers

A JANNAF sponsored workshop was held to discuss the importance and role of radiative heat transfer in rocket combustion chambers. The potential impact of radiative transfer on hardware design, reliability, and performance was discussed. The current state of radiative transfer prediction capability in CFD modeling was reviewed and concluded to be substantially lacking in both the physical models used and the radiative property data available. There is a clear need to begin to establish a data base for making radiation calculations in rocket combustion chambers. A natural starting point for this effort would be the NASA thermochemical equilibrium code (CEC).

Brewster, M. Q.↗
NASA NTRS1991

High power, high efficiency millimeter wavelength traveling wave tubes for high rate communications from deep space

The high-power transmitters needed for high data rate communications from deep space will require a new class of compact, high efficiency traveling wave tubes (TWT's). Many of the recent TWT developments in the microwave frequency range are generically applicable to mm wave devices, in particular much of the technology of computer aided design, cathodes, and multistage depressed collectors. However, because TWT dimensions scale approximately with wavelength, mm wave devices will be physically much smaller with inherently more stringent fabrication tolerances and sensitivity to thermal dissipation.

Dayton, James A., Jr.↗