Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “core sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

High coercivity sized controlled cobalt–gold core–shell nano-crystals prepared by reverse microemulsion

Graphical abstract: - Highlights: • Calculating the crystallinity percentage and percentage of phases presented in Co–Au core–shell nanoparticles. • Magnetic properties of four groups nanogarin: 5, 10, 15, 20 nm. • Single domain ferromagnetic materials with high coercivity at room temperature. • Intrinsic blocking temperature measured in zero field cooled-warmed (ZFC-W). - Abstract: Size-controlled cobalt–gold core–shell nanoparticles were synthesized via the reverse-micelle microemulsion method. In order to control the size of the nanoparticles, the nucleation and growth process were performed within a confined space by adjusting the water to surfactant ratio of reverse micelles solution during synthesis. The crystallinity percentage and percentage of phases presented in Co–Au core–shell nanoparticles were calculated using X-ray diffraction data. The results from transmission electron microscopy provide direct evidence for core–shell structure nanomaterials. Magnetic properties of the samples were investigated using a vibrating sample magnetometer. The as-prepared samples showed significant coercivity at room temperature. The intrinsic blocking temperature was experimentally deduced from zero-field-cooled warmed (ZFC-W) curves by a simple method without employing an external magnetic field. The B-field dependence temperature data of Co–Au nanoparticles exhibited an intrinsic blocking temperature at 45 K. Annealing these samples at 400 °C caused an increase in particle size, crystallinity percentage and further enhanced their magnetic properties.

36 MATERIALS SCIENCE↗

Enhanced temperature-stable dielectric properties in oxygen annealed 0.85(K0.5Na0.5)NbO3-0.15SrZrO3 ceramic

Highlights: • Prepared O{sub 2}-annealed KNN-15SZ could meet the EIA X8R specification. • Oxygen annealing resulted in different variation of T{sub m} of cores and shells. • Variation of T{sub m} related to decrease of oxygen vacancies and diffusion of KNN. • Enhanced dielectric temperature stability attributed to change of PNRs size. - Abstract: The structure, morphology and dielectric properties of the oxygen annealed (O{sub 2}-annealed) and untreated (as-prepared) 0.85(K{sub 0.5}Na{sub 0.5}) NbO{sub 3}-0·15SrZrO{sub 3} (KNN-15SZ) ceramics were investigated. The temperature dependence of dielectric permittivity shows two diffuse dielectric peaks associated with duplex core-shell structure, leading to relatively stable dielectric permittivity in a wide temperature range. Interestingly, the O{sub 2}-annealed sample with the operating temperature range of −104 °C–157 °C could meet the EIA X8R specification, which is superior to the as-prepared one (−98 °C–130 °C) for the EIA X7R specification. Furthermore, the dielectric contribution from cores and shells of both samples was divided by the Lorentz fitting. The relation between relaxation frequency and temperature of both samples obeyed the Vogel-Fulcher law. This finding could pave a possible way to modify dielectric temperature stability for multilayer ceramic chip capacitors applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Liquid-liquid phase separation in aerosol particles: Imaging at the Nanometer Scale

Atmospheric aerosols can undergo phase transitions including liquid-liquid phase separation (LLPS) while responding to changes in the ambient relative humidity (RH). Here, we report results of chemical imaging experiments using environmental scanning electron microscopy (ESEM) and scanning transmission x-ray microscopy (STXM) to investigate the LLPS of micron sized particles undergoing a full hydration-dehydration cycle. Internally mixed particles composed of ammonium sulfate (AS) and either: limonene secondary organic carbon (LSOC), a, 4-dihydroxy-3-methoxybenzeneaceticacid (HMMA), or polyethylene glycol (PEG-400) were studied. Events of LLPS with apparent core-shell particle morphology were observed for all samples with both techniques. Chemical imaging with STXM showed that both LSOC/AS and HMMA/AS particles were never homogeneously mixed for all measured RH’s above the deliquescence point and that the majority of the organic component was located in the shell. The shell composition was estimated as 65:35 organic: inorganic in LSOC/AS and as 50:50 organic: inorganic for HMMA/AS. PEG-400/AS particles showed fully homogeneous mixtures at high RH and phase separated below 89-92% RH with an estimated 50:50% organic to inorganic mix in the shell. These two chemical imaging techniques are well suited for in-situ analysis of the hygroscopic behavior, phase separation, and surface composition of collected ambient aerosol particles.

Environmental Molecular Sciences Laboratory↗

Preparation of homogeneous gold-silver alloy nanoparticles using the apoferritin cavity as a nanoreactor

Homogeneous Au-Ag alloy nanoparticles have been synthesized in the cavity of horse spleen apoferritin (HSAF) by a diffusion technique. Low concentration of NH4OH solution has been used stabilize Ag(I) ions at pH 8.3, where channels between the subunits of HASF are open for the diffusion of metal ions. The Au-Ag nanoparticle cores are 5.6-6.3 nm in diameter with narrow size distribution (≤ 1.0 nm), and their average diameter was gradually increased with an increase of Ag content. The core formation ratios of Au-Ag-HASF samples are higher than 80%. These series of nanoparticles were applied for the reduction of 4-nitrophenol in the presence of NaBH4. As the Au content was increased in the Au-Ag-HSAF nanoparticles, the rate constant of the reduction was exponentially increased from 1.3 x 10-3 s-1 (pure Ag-HSAF) to 7.58 x 10-2 s-1 (pure Au-HSAF). These synthesized Au-Ag nanoparticles with different compositions will be further applicable in catalysis, sensing, and biomedical areas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactivity worth measurements at the IPEN/MB-01 nuclear reactor

Researches that aim to improve the performance of neutron transport codes and quality of nuclear cross section databases are very important to increase the accuracy of simulations and the quality of the analysis and prediction of phenomena in the nuclear field. In this context, relevant experimental data such as reactivity worth measurements are needed. The objective of this work was to perform a series of experiments of reactivity worth measurements, using a digital reactivity meter developed at IPEN. The experiments employed small metallic and ceramic samples inserted in the central region of the core of the experimental IPEN/MB-01 reactor. The theoretical analysis was performed by the MCNP-5 reactor physics code, developed and maintained by Los Alamos National Laboratory, and the ENDF/B-VII.0 nuclear data library.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

CONSTRAINTS ON THE ASSEMBLY AND DYNAMICS OF GALAXIES. II. PROPERTIES OF KILOPARSEC-SCALE CLUMPS IN REST-FRAME OPTICAL EMISSION OF z {approx} 2 STAR-FORMING GALAXIES

We study the properties of luminous stellar 'clumps' identified in deep, high-resolution Hubble Space Telescope NIC2/F160W imaging at 1.6 {mu}m of six z {approx} 2 star-forming galaxies with existing near-infrared integral field spectroscopy from SINFONI at the Very Large Telescope. Individual clumps contribute {approx}0.5%-15% of the galaxy-integrated rest-frame {approx}5000 A emission, with median of {approx}2%; the total contribution of clump light ranges from 10% to 25%. The median intrinsic clump size and stellar mass are {approx}1 kpc and {approx}10{sup 9} M{sub sun}, in the ranges for clumps identified in rest-UV or line emission in other studies. The clump sizes and masses in the subset of disks are broadly consistent with expectations for clump formation through gravitational instabilities in gas-rich, turbulent disks given the host galaxies' global properties. By combining the NIC2 data with Advanced Camera for Surveys (ACS)/F814W imaging available for one source, and adaptive-optics-assisted SINFONI H{alpha} data for another, we infer modest color, M/L, and stellar age variations within each galaxy. In these two objects, sets of clumps identified at different wavelengths do not fully overlap; NIC2-identified clumps tend to be redder/older than ACS- or H{alpha}-identified clumps without rest-frame optical counterparts. There is evidence for a systematic trend of older ages at smaller galactocentric radii among the clumps, consistent with scenarios where inward migration of clumps transports material toward the central regions. From constraints on a bulge-like component at radii {approx}< 1-3 kpc, none of the five disks in our sample appears to contain a compact massive stellar core, and we do not discern a trend of bulge stellar mass fraction with stellar age of the galaxy. Further observations are necessary to probe the buildup of stellar bulges and the role of clumps in this process.

79 ASTRONOMY AND ASTROPHYSICS↗

Properties of optically selected supernova remnant candidates in M33

Narrowband images covering strong emission lines are efficient for surveying supernova remnants (SNRs) in nearby galaxies. Using the narrowband images provided by the Local Group Galaxy Survey, we searched for SNRs in M33. Culling the objects with enhanced [S II]/Hα and round morphology in the continuum-subtracted Hα and [S II] images, we produced a list of 199 sources. Among them, 79 are previously unknown. Their progenitor and morphology types were classified. A majority of the sample (170 objects) are likely remnants of core-collapse supernovae (SNe), and 29 are remnants of Type Ia SNe. The cumulative size distribution of these objects is found to be similar to that of the M31 remnants derived in a similar way. We obtain a power-law slope, α = 2.38 ± 0.05. Thus, a majority of the sources are considered to be in the Sedov-Taylor phase, consistent with previous findings. The histogram of the emission-line ratio ([S II]/Hα) of the remnants has two concentrations at [S II]/Hα ∼ 0.55 and ∼0.8, as in M31. Interestingly, L {sub X} (and L {sub 20cm}) of the compact center-bright objects are correlated with their optical luminosity. The remnants with X-ray emission have brighter optical surface brightnesses and smaller diameters than those without X-ray emission.

79 ASTRONOMY AND ASTROPHYSICS↗

MORPHOLOGICAL EVOLUTION OF GALAXIES FROM ULTRA-DEEP HUBBLE SPACE TELESCOPE WIDE FIELD CAMERA 3 IMAGING: THE HUBBLE SEQUENCE AT z {approx} 2

We use ultra-deep Hubble Space Telescope Wide Field Camera 3/infrared imaging of the Hubble Ultra Deep Field to investigate the rest-frame optical morphologies of a mass-selected sample of galaxies at z {approx} 2. We find a large variety of galaxy morphologies, ranging from large, blue, disk-like galaxies to compact, red, early-type galaxies. We derive rest-frame u - g color profiles for these galaxies and show that most z {approx} 2 galaxies in our sample have negative color gradients such that their cores are red. Although these color gradients may partly be caused by radial variations in dust content, they point to the existence of older stellar populations in the centers of z {approx} 2 galaxies. This result is consistent with an 'inside-out' scenario of galaxy growth. We find that the median color gradient is fairly constant with redshift: ({Delta}(u - g{sub rest})/{Delta}(log r)){sub median} = -0.47, -0.33, and -0.46 for z {approx} 2, z {approx} 1, and z = 0, respectively. Using structural parameters derived from surface brightness profiles we confirm that at z {approx} 2 galaxy morphology correlates well with specific star formation rate. At the same mass, star-forming galaxies have larger effective radii, bluer rest-frame u - g colors, and lower Sersic indices than quiescent galaxies. These correlations are very similar to those at lower redshift, suggesting that the relations that give rise to the Hubble sequence at z = 0 are already in place for massive galaxies at this early epoch.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-E-J-127: Implementation of An Online Replanning Tool for VMAT Using Flattening Filter-Free Beams

Purpose: This is to report the implementation of an online replanning tool based on segment aperture morphing (SAM) for VMAT with flattening filter free (FFF) beams. Methods: Previously reported SAM algorithm modified to accommodate VMAT with FFF beams was implemented in a tool that was interfaced with a treatment planning system (Monaco, Elekta). The tool allows (1) to output the beam parameters of the original VMAT plan from Monaco, and (2) to input the apertures generated from the SAM algorithm into Monaco for the dose calculation on daily CT/CBCT/MRI in the following steps:(1) Quickly generating target contour based on the image of the day, using an auto-segmentation tool (ADMIRE, Elekta) with manual editing if necessary; (2) Morphing apertures based on the SAM in the original VMAT plan to account for the interfractional change of the target from the planning to the daily images; (3) Calculating dose distribution for new apertures with the same numbers of MU as in the original plan; (4) Transferring the new plan into a record & verify system (MOSAIQ, Elekta); (5) Performing a pre-delivery QA based on software; (6) Delivering the adaptive plan for the fraction.This workflow was implemented on a 16-CPU (2.6 GHz dual-core) hardware with GPU and was tested for sample cases of prostate, pancreas and lung tumors. Results: The online replanning process can be completed within 10 minutes. The adaptive plans generally have improved the plan quality when compared to the IGRT repositioning plans. The adaptive plans with FFF beams have better normal tissue sparing as compared with those of FF beams. Conclusion: The online replanning tool based on SAM can quickly generate adaptive VMAT plans using FFF beams with improved plan quality than those from the IGRT repositioning plans based on daily CT/CBCT/MRI and can be used clinically. This research was supported by Elekta Inc. (Crawley, UK)

60 APPLIED LIFE SCIENCES↗

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 3c Raw Data

XPS after 0hr of chronoampometry. Surface chemical composition and valence band structure of GaN were obtained by X-ray photoemission spectroscopy (XPS) on a Kratos Axis Ultra DLD system at a takeoff angle of 0° relative to the surface normal. An Al Kα source (hν = 1486.6 eV) was used to excite the core level electrons. Pass energy of 20 eV was used for the narrow scan of core levels and valence band spectra, and step size of 0.05 eV and 0.025 eV, respectively. The Spectral fitting was conducted using CasaXPS analysis software. The binding energy scales of all core levels were corrected to the N 1s of Ga – N bond at 397.8 eV. XPS O1s core level spectra from as-received Si/GaN sample, and deconvolution shows O - Ga bond and OH - H2O bond.

photocathode↗

Proteomics Analysis of Human Contaminant Proteins

Complete characterization of unknowns via proteomics remains challenging. There exist regions of mass spectrometry-based proteomics data where empirical measurements are not attributed to peptides, and/or sequenced peptides from mass spectra are not attributed to any source. These uncharacterized regions are known as the “dark” proteome. Many proteomics tools rely on some a priori knowledge of sample composition; few tools allow for investigation of unknowns without relying on composition assumptions. Further, the potential low abundance of minor traces in these uncharacterized regions can make elucidation of the “dark” proteome challenging. Herein, we describe the development and evaluation of approaches to study the “dark” proteome and move towards an untargeted approach for more complete characterization, namely by studying minor human protein traces in non-human samples and combining that approach with non-human source organism identification without relying on assumptions. Human protein markers, in the form of genetically variant peptides, have been extensively examined in a variety of human matrices, including blood, plasma, and hair, but have yet to be investigated in non-human samples, such as cell cultures, as human contaminant traces. Genetically variant peptides are those that are found in proteins carrying single nucleotide polymorphisms. In this work, we aimed to (1) investigate the feasibility of detecting human contaminant genetically variant peptides (GVPs) in a diverse set of non-human organisms using public proteomics data and a computational pipeline, as well as to (2) develop a combined capability for untargeted source organism characterization and GVP detection. To our knowledge, this is the first report of applying these approaches towards a more complete proteomic characterization of unknowns. We successfully demonstrate the feasibility of broad human contaminant GVP detection in proteomics data, develop a better understanding of GVP detectability, characterize the sample-to-sample variability in GVP detection, and identify a core set of GVPs that can potentially be used as markers indicative of the human contaminant traces portion of the “dark” proteome. Further, we developed and evaluated a combined pipeline, MARLOWE-GVP, that enables both untargeted source organism characterization and GVP detection. We show high accuracy of correct source organism characterization and high degree of similarity of human contaminant GVP detection compared to the conventional approach. Success on both these efforts have allowed us to advance our understanding and characterization of the “dark” proteome.

59 BASIC BIOLOGICAL SCIENCES↗

Precision Polishing of Spheres Via In-Situ Process Monitoring and Machine-Learning-Based Optimization

Precision polishing for high surface finish is a vital step in the making of many high-tech components for optical and semiconductor modules as well as for wide ranging experimental samples for HED science that is at the core of LLNL’s mission. In particular, the fabrication of extremely smooth and round spheres comprised of low atomic number materials (low-Z such as high-density carbon or HDC, beryllium, hydrocarbon polymers, etc.) for Inertial Confinement Fusion (ICF) is entirely reliant on specialized polishing processes to achieve the surface smoothness.

36 MATERIALS SCIENCE↗

Systematic chemical variations in large 3AB iron meteorites: Clues to core crystallization

Analysis of numerous individual iron meteorites have shown that fractional crystallization of iron cores result in variations in chemical concentration of the solid core which span several orders of magnitude. The magnitude and direction of the resulting spatial gradients in the core can provide clues to the physical nature of the core crystallization process. We have analyzed suites of samples from three large 3AB irons (Cape York, 58t; Chupaderos, 24t; Morito, 10t) in order to estimate local chemical gradients. Initial results for the concentrations of Ge, Pd, Pt (Massey group), Ir, Au, As, Co, Os, and Rh (Dalhouse group), and P (Arizona group) show significant ranges among the Cape York and Chupaderos samples and marginally significant ranges among the Morito samples. Measurements of Au, Ir, Co, Ni, Cu, Ga, As, W, Re (from UCLA) and Ni and Co (Arizona group) are in progress. We find a spatial Ir gradient in Chupaderos with a magnitude similar to the one reported for Agpalilik (Cape York iron) by Esbensen et al.

Haack, H.↗

The spatial distribution, kinematics, and dynamics of the galaxies in the region of Abell 2634 and 2666

A total of 663 galaxies with known redshifts in a 12 deg x 12 deg field centered on A2634, including 211 new measurements, are used to study in detail the structure of the region. In it we find six main galaxy concentrations: the nearby clusters A2634 and A2666, two groups in the vicinity of A2634, and two distant clusters at approximately 18,000 (A2622) and approximately 37,000 km/s seen in projection near the core of A2634. For A2634, the most richly sampled of those concentrations, we are able to apply strict cluster membership criteria. Two samples - one containing 200 galaxies within 2 deg from the cluster center and a second, magnitude-limited, of 118 galaxies within the central half degree - are used to examine the structure, kinematics, dynamics, and morphological segregation of the cluster. We show that early type galaxies appear to be a relaxed system, while the spiral population eschews the center of the cluster and exhibits both a multimodal velocity distribution and a much larger velocity dispersion that the ellipticals. We propose that the spiral galaxies of A2634 represent a dynamically young cluster population. For the galaxy component of A2634, we find no evidence of significant substructure in the central regions. We also conclude that the adoption of lenient membership criteria that ignore the dynamical complexity of A2634 are unlikely to be responsible for the conflicting results reported on the motion of this cluster with respect ot the CMB. The kinematical and dynamical analysis is extended to A2634's close companion, A2666, and the two distant background clusters.

Scodeggio, Marco↗

Biotechnology Approaches to Life Detection

The direct detection of organic biomarkers for living or fossil microbes on Mars by an in situ instrument is a worthy goal for future lander missions. Several new and innovative biotechnology approaches are being explored. Firstly we have proposed an instrument based on immunological reactions to specific antibodies to cause activation of fluorescent stains. Antibodies are raised or acquired to a variety of general and specific substances that might be in Mars soil. These antibodies are then combined with various fluorescent stains and applied to micron sized numbered spots on a small (2-3 cm) test plate where they become firmly attached after freeze drying. Using technology that has been developed for gene mining in DNA technology up to 10,000 tests per square inch can now be applied to a test plate. On Mars or the planet/moon of interest, a sample of soil from a trench or drill core is extracted with water and/or an organic solvent and ultrasonication and then applied to the test plate. Any substance, which has an antibody on the test plate, will react with its antibody and activate its fluorescent stain. At the moment a small UV light source will illuminate the test plate, which is observed with a small CCD camera, although other detection systems will be applied. The numbered spots that fluoresce indicate the presence of the tested-for substance, and the intensity indicates relative amounts. Furthermore with up to a thousand test plates available false positives and several variations of antibody can also be screened for. The entire instrument can be quite small and light, on the order of 10 cm in each dimension. A possible choice for light source may be small UV lasers at several wavelengths. Some of the wells or spots can contain simply standard fluorescent stains used to detect live cells, dead cells, DNA, etc. The stains in these spots may be directly activated, with no antibodies being necessary. The proposed system will look for three classes of biomarkers: those from extant life, such as DNA, those from extinct life such as hopanes, and those from organic compounds not necessarily associated with life such as PAHs, rocket exhaust contamination and other a/pre-biotic chemicals. Both monoclonal and polyclonal antibodies can be used. Monoclonal antibodies react with a very specific compound, but polyclonal antibodies may react to any of a whole family of compounds. Furthermore the technique of phage display to raise antibodies against classically non-antigenic molecules is also being considered. Additional information is contained in the original extended abstract.

Steele, Andrew↗

Changes in Polymeric Tether Properties Due to Atomic Oxygen

The Propulsive Small Expendable Deployer System (ProSEDS) mission is designed to provide an on-orbit demonstration of the electrodynamic propulsion capabilities of tethers in space. The ProSEDS experiment will be a secondary payload on a Delta II unmanned expendable booster. A 5-km conductive tether is attached to the Delta II second stage and collects current fiom the low Earth orbit (LEO) plasma to facilitate de-orbit of the spent stage. The conductive tether is attached to a 10-km non-conductive tether, which is then attached to an endmass containing several scientific instruments. Atomic oxygen (AO) erodes most organic materials. As the orbit of the Delta II second stage decas, the AO flux (atoms/sq cm sec) increases. A nominal AO fluence of 1 x l0(exp 21) atoms/sq cm was agreed upon by the investigators as an adequate level for evaluating the performance of the tether materials. A test series was performed to determine the effect of atomic oxygen (AO) on the mechanical integrity and possible strength loss of ProSEDS tether materials. The tether materials in this study were Dyneema, an ultra-high molecular weight polyethylene material used as the non-conducting portion of the ProSEDS tether, and the Kevlar core strength fiber used in the conductive tether. Samples of Dyneema and Kevlar were exposed to various levels of atomic oxygen up to 1.07 x 10(exp 21) atoms/sq cm in the Marshall Space Flight Center Atomic Oxygen Beam Facility (AOBF). Changes in mass were noted after AO exposure. The tethers were then tensile-tested until failure. AO affected both the Dyneema and Kevlar tether material strength. Dyneema exposed to 1.07 x 10(exp 21) atoms/sq cm of atomic oxygen failed due to normal handling when removed fiom the AOBF and was not tensile-tested. Another test series was performed to determine the effect of AO on the electrical properties of the ProSEDS conductive tether. The conductive tether consists of seven individually coated strands of 28 AWG 1350-0 aluminum wire. The conductive coating, developed by Triton Systems, Inc., is a mix of polyanaline and COR, a clear AO-resistant polymer.

Finckenor, Miria M.↗