Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cooperatively”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Cordova Electric Cooperative Energy Storage Evaluation

The community of Cordova, Alaska currently uses diesel and run-of-river hydro generation for its electricity needs. In the past, 60% of the Cordova summer load was supplied by the run-of-river generation. The majority of the time, the load was supplied only by the run-of-river generation. The bulk of generated electricity is delivered to Cordova's industrial fish processing plants and to other industrial loads. With the expansion of Cordova's fishing industry, the run-of-river generation is less often able to supply 100% of the load demand. When the run-of-river generation is not able to supply 100% of the load demand it has to be supplemented by diesel generation. There are also many times when the load demand is low and the available run-of-river generation has to be curtailed by spilling water which could be stored in an energy storage system. Sandia National Laboratories and Alaska Center for Energy and Power collaborated to evaluate how an energy storage system can be used to capture the spilled water and how it can economically and technically benefit Cordova during the fishing season and other times throughout the year. Results from this study are summarized in this report.

02 PETROLEUM↗

Abstract - Cooperative Research and Development Agreement between Sotacarbo and National Energy Technology Laboratory

The objective of this CRADA between NETL and Sotacarbo is to develop mutual collaboration in the areas of: CFD Modeling for optimization of coal/biomass gasification processes, CO 2 Separation by Membranes, CO 2 -to-Liquids, & CO 2 Sequestration. The CFD modeling and optimization of coal/biomass gasification processes project will bring together NETL’s expertise in the area of computational multiphase flows with Sotacarbo’s expertise in the area of design and operation of coal and biomass gasifiers. The outcome of this collaboration should be validated coal/biomass CFD models, which can assist in design and scale-up studies of gasifiers. There are several gasification units at Sotacarbo’s Research Center which can be used for gasification model development and validation using NETL’s MFiX Suite of multiphase flow CFD software. The other remaining technical topic outcomes will be determined at a later time as a result of further discussions.

01 COAL, LIGNITE, AND PEAT↗

Cooperative Research and Development Agreement between Applied Minerals, Columbian Chemicals Company and National Energy Technology Laboratory

NETL researchers will be collaborating with Applied Minerals, Inc., and Columbian Chemicals Company, to leverage NETL's patented work in chemical looping to commercialize an efficient and a cost-effective process for production of hydrogen and carbon from natural gas. This hybrid chemical looping process of production of hydrogen and carbon combined with heat production using an oxygen carrier is a promising technology but finding an appropriate oxygen carrier to perform all the functions has been a challenge. NETL has developed a novel dual function oxygen carrier containing copper oxide - iron oxide. This oxygen carrier in the reduced form functions as catalyst to produce carbon and hydrogen from methane and heat required for this endothermic process is provided by either combustion of hydrogen or oxidation of the reduced oxygen carrier. This process is cost effective, energy efficient and environmental friendly with minimal CO2 mitigation costs. The objective of the project is to obtain data necessary for economic evaluation of the process to produce carbon suitable for applications at Columbian Chemicals Company and Applied Minerals Inc.

03 NATURAL GAS↗

Array Effects in Large Wind Farms: Cooperative Research and Development Final Report, CRADA Number CRD-15-590

The effects of wind turbine wakes within operating wind farms has a substantial impact on the overall energy production from the farm. The current generation of models drastically underpredicts the impact of these wakes offshore leading to non-conservative estimates of energy capture and financial losses to wind farm operators and developers. To improve these models, detailed research of operating wind farms is necessary. Cornell University is a world leader of wind farm wakes effects and would like to partner with NREL to help improve wind farm modeling (by gathering additional wind farm data), develop better models and increase collaboration with European researchers working in the same area.

17 WIND ENERGY↗

Multifamily Building Stock Modeling: Cooperative Research and Development Final Report, CRADA Number CRD-17-00701

U.S. multifamily buildings house 35 million households, consuming 4 quads of source energy and spending $48 billion on utility bills every year. Almost all of these households live in urban areas, where cities are taking the lead on setting aggressive energy goals. Cities currently do not have the data and tools necessary to identify and target opportunities to save energy in their building stock. Building on the open-source, OpenStudio-based ResStock platform, this project will extend the publicly-available ResStock modeling capabilities to the multifamily sector, enabling Radiant Labs, and others, to partner with cities to market and strategically deploy cost-effective, energy efficiency (EE) upgrades directly to high-priority households. Radiant Labs has been successful in using ResStock's single-family capabilities to provide value to the City of Boulder, Colorado. However, lack of multifamily capabilities in ResStock is a roadblock for Radiant Labs working with New York City, San Francisco, Washington, D.C., and other cities that have expressed significant interest in working with them. In addition, other cities, companies, and utilities can use these open-source capabilities to grow their EE portfolios, thereby multiplying the impact of this project. This work also enables national-scale analysis of EE potential in multifamily buildings, which is of strong interest to a variety of stakeholders, including the U.S. Department of Energy (DOE) Office of Energy Policy and Systems Analysis (EPSA), DOE Weatherization Assistance Program (WAP), U.S. Department of Housing and Urban Development (HUD), and the Bonneville Power Administration (BPA).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Abstract - Cooperative Research and Development Agreement between Ramaco Carbon and National Energy Technology Laboratory

Domestic coal can be used to manufacture a wide range of solid carbon products including carbon fiber, carbon additives for cements and structural composites, battery and electrode materials, carbon nanomaterials and composites, and 3D printing materials. The market value of high performance carbons in these applications exceeds the fuel and heat value of coal by several orders of magnitude, which illustrates there are sustainable market forces to manufacture high performance carbon materials from domestic coal feedstocks.

01 COAL, LIGNITE, AND PEAT↗

Fuel Cell Vehicle Infrastructure Research and Demonstration: Cooperative Research and Development Final Report, CRADA Number CRD-16-601

In support of NREL's mission, which includes preparing technologies and markets with 'speed and scale,' HATCI will loan up to two fuel cell vehicles (collectively, the 'vehicles') to NREL. Operation of the vehicles enables NREL to provide education of the vehicle technology and research renewable hydrogen production, fueling equipment, and hydrogen energy system integration in real-world conditions and use. These vehicles provide an opportunity for NREL to evaluate the Hydrogen Infrastructure Testing & Research Facility (HITRF) using a variety of vehicle types, which provides a balanced portfolio of this technology and represents real world conditions more accurately.

33 ADVANCED PROPULSION SYSTEMS↗

Tatsuno Coriolis Flow Meter Development Testing in High Pressure Hydrogen: Cooperative Research and Development Final Report

This project will provide test data on the new Tatsuno coriolis flow meter. This flow meter has been developed by Tatsuno for the purpose of achieving improved flow meter performance for 70 mega pascal (MPA) hydrogen dispensing. Testing will be conducted at the National Renewable Laboratory (NREL) Hydrogen Infrastructure Testing and Research Facility (HITRF) facility utilizing the hydrogen flow meter benchmark testing apparatus. The benchmarking apparatus utilizes a gravimetric method for measuring flow for direct comparison with flow meter output. Using the NREL meter benchmarking apparatus will allow direct comparison with data taken on previous versions of the Tatsuno coriolis flow meter product. Flow meter accuracy at 70 MPA hydrogen dispensers is an issue that has generated a lot of effort by both standards organizations and the station providers.

33 ADVANCED PROPULSION SYSTEMS↗

Final Report – Cooperative Research and Development Agreement between National Energy Technology Laboratory and Solar Turbines Incorporated

The National Energy Technology Laboratory is developing the Raman Gas Analyzer (RGA) to be a fast, non-destructive instrument for on-line measurement of gas composition. The RGA prototype has been demonstrated to have an extremely fast response (<1 second) multi-gas analysis capability. All but the noble gases are Raman active, but Raman interaction is weak with gas phase substances. The RGA uses a reflectively lined capillary as the optical cell in a patented configuration, providing both a small sample volume for fast gas exchange, and a much greater Raman signal collection than traditional instrument configurations. This allows very fast measurement of fuel gases (hydrogen, methane, ethane, propane) as well as other common industrial gases (including CO, CO2, N2, O2, H2O). The RGA provides a new enabling technology for faster, smarter process control based on the chemical composition of the gases in the process, such as improving fuel flexibility and efficiency for power generation systems. NETL has constructed a field prototype of the RGA to test the instrument performance in various applications in fossil energy. Through this CRADA, the RGA prototype operation was tested using hydrocarbon mixtures and hydrogen on a combustor test rig for potential use in gas turbine engine testing. The testing was performed at the Solar Turbines Incorporated Harbor Drive facility in downtown San Diego, CA on December 3-7, 2018. The RGA was installed outside a combustor test bay, with a ¼" sample line connected from a point shortly upstream of the test combustor. The combustion test building online gas chromatograph reported analysis of a sample every 6 minutes. During testing, seven test conditions of pure gas or gas mixtures were supplied to a pressurized combustion test rig. A sample of the fuel gas was continuously analyzed using the RGA with a 1 second measurement and reporting time. For each test condition, once the steady condition was reached, the composition of the gas from the RGA measurements is reported, along with the expected composition from the flow meters, and the composition reported by the online gas chromatograph (GC). During this testing, the real-time measurement capability of the RGA was readily apparent. The composition changes occurring in real-time could be followed and observed to correspond to combustion behavior changes on the video monitor at the operator station. The largest concentration species were tracked well through the tests; however, from comparison of the RGA one-second data with the GC steady-state points, it appears the RGA had some difficulty with quantifying hydrocarbon mixtures, especially when some of the hydrocarbons were at low concentration. The difficulty was particularly noted for ethane and butane in these tests. The NETL team intends to address this in 2019. Moderate concentrations of nitrogen, carbon dioxide, and hydrogen (>10%) were readily observed in the spectral data and quantified closely to the GC measurements. While calibration data for propylene was collected in preparation for this testing, it was not observed during the testing, even when the test conditions had high concentrations of propane.

Source record↗

Cooperative Development of NETL Electrode Engineering Process for SOFC Commercialization (Final Report)

The objectives of the proposed work are to mature the NETL electrode engineering technique to enhance the activity and stability of tubular solid oxide fuel cell (SOFC) cathode electrodes in a cost-effective way and to demonstrate its commercial viability through SOFC stack testing. These overall objectives were realized through the following goals: 1) Reduction of baseline area-specific resistance (ASR) of tubular SOFC cathodes; 2) Mitigation of the long-term (>2000 h) degradation rate of tubular SOFC cathodes; 3) Demonstration of SOFC stack operation for commercially acceptable efficiency and performance.

30 DIRECT ENERGY CONVERSION↗

HySafe research priorities workshop report: Summary of the workshop organized in cooperation with US DOE and supported by EC JRC in Washington DC November 10-11, 2014

The HySafe research priorities workshop is held on the even years between the International Conference on Hydrogen Safety (ICHS) which is held on the odd years. The research priorities workshop is intended to identify the state-of-the-art in understanding of the physical behavior of hydrogen and hydrogen systems with a focus on safety. Typical issues addressed include behavior of unintended hydrogen releases, transient combustion phenomena, effectiveness of mitigation measures, and hydrogen effects in materials. In the workshop critical knowledge gaps are identified. Areas of research and coordinated actions for the near and medium term are derived and prioritized from these knowledge gaps. The stimulated research helps pave the way for the rapid and safe deployment of hydrogen technologies on a global scale. To support the idea of delivering globally accepted research priorities for hydrogen safety the workshop is organized as an internationally open meeting. In attendance are stakeholders from the academic community (universities, national laboratories), funding agencies, and industry. The industry participation is critically important to ensure that the research priorities align with the current needs of the industry responsible for the deployment of hydrogen technologies. This report presents the results of the HySafe Research Priorities Workshop held in Washing ton, D.C. on November 10-11, 2014. At the workshop the participants presented updates (since the previous workshop organized two years before in Berlin, Germany) of their research and development work on hydrogen safety. Following the workshop, participants were asked to provide feedback on high-priority topics for each of the research areas discussed and to rank research area categories and individual research topics within these categories.

08 HYDROGEN↗

High Efficiency Concentrating Photovoltaic Power System (Cooperative Research and Development Final Report, CRADA Number CRD-07-229)

Using NREL's characterization capabilities, NREL will conduct electrical, optical, and materials characterization on semiconductor samples for concentrator solar cells, grown by both NREL and Boeing-Spectrolab. NREL will also apply its solar cell fabrication expertise to develop advanced, potentially low-cost concentrator solar cell fabrication processes, e.g. improved etching, metallization, coating deposition, isolation, and other processes. NREL will extend its experience with transparent conductive coatings (TCC) to develop terrestrial concentrator cell contacts using these materials. As required, NREL will carry out metalorganic vapor phase epitaxy (MOVPE) growth development of inverted metamorphic multi-junction solar cells and compare with Boeing-Spectrolab's MOVPE growth processes.

14 SOLAR ENERGY↗

Abengoa/Acciona Power Plant Hydrogen Mitigation Project (Cooperative Research and Development Final Report, CRADA Number CRD-15-583)

Several Gigawatts (GW) of solar concentrating parabolic trough generating capacity have been installed in the U.S. and internationally in the past five years. Many of these power plants include thermal energy storage, which allows the plants to generate electricity during off-sun hours. The U.S. now has about 1 GW of solar-to-electric generating capacity using concentrating parabolic trough technology. Parabolic trough power plants have a long-standing performance issue relating to the build-up of trace quantities of hydrogen gas in the receiver tubes. Hydrogen is a byproduct of the very slow breakdown of the heat transfer fluid. Accumulation of hydrogen in the receivers causes a loss in the thermal efficiency of the receivers and an overall decrease in the power plant annual electricity output. Since a typical plant contains 50,000 receivers, addressing this issue by individual receiver is not practical. The National Renewable Energy Laboratory (NREL) conceived and developed a method to remove or purge hydrogen from the power plant receivers by removing hydrogen from a single location within the plant. Hydrogen gas is purged from the heat transfer fluid that resides in the power plant expansion tanks. Modeling shows that quantitative removal of hydrogen from the expansion tanks will reverse build-up of hydrogen in the receiver tubes and restore the power plant to its full performance and annual energy output. This method is documented in U.S. Patent 8,568,582, which issued in October 2013. Two companies, Abengoa Solar and Acciona Solar Power, Inc. contacted NREL to discuss solutions to the eventual build-up of hydrogen in their commercial parabolic trough power plants. NREL proposed to implement its method at Acciona's Nevada Solar One (NSO) parabolic trough power plant in Boulder City, Nevada. The first year will consist of laboratory testing at the NREL Energy Systems Integration Facility (ESIF) along with process specification, design, and costing. The second year will be the full-scale implementation of the hydrogen mitigation process at the NSO power plant in Nevada.

14 SOLAR ENERGY↗

M3 Wave System Modeling: Cooperative Research and Development Final Report, CRADA Number CRD-17-697

M3 Wave is a leader in submerged pressure differential wave energy harvesting technology. M3 Wave's approach to developing technology is focused on simplicity and survivability. The company has been working on wave energy devices since 1991 and has produced a number of successes during that time. During testing as part of DOE's Wave Prize finals, M3 Wave encountered an unexpected phenomenon that increased power production by over 25% in their NEXUS system. The problem to be explored by this project is how to accurately model and characterize this phenomenon to better take advantage of the potential benefits. This will be accomplished by: 1) developing and validating a system-hydrodynamics model of M3 Wave's NEXUS system; 2) performing a parameter study to identify possible mechanisms for improved energy capture, and 3) providing M3 Wave with a working, adaptable, model of their system, such that M3 Wave is able to incorporate the study's findings and optimize their system for improved LCOE.

16 TIDAL AND WAVE POWER↗

Regenerative Fuel Cell System (Cooperative Research and Development Final Report, CRADA Number CRD-16-635)

Grid energy storage is required to maintain reliable electricity delivery from energy producers to their customers. As electrical loads on the grid change throughout the day, stored energy supplies electricity during increased power demand periods. Further, as more renewable and alternative energy sources are added, energy storage will maximize the usefulness of these technologies. Currently, the United States has over 24.6 GW of grid storage, about 2% of the total electrical production capacity. About 95% of energy storage comes from pumped hydro. However, pumped hydro energy storage is dependent on existing geographic features, making it difficult to integrate with widespread renewable energy sources. As energy demands continue to expand, and more renewable energy (i.e. wind and solar) is added to the grid, new energy storage technologies will be needed that are not dependent on geographic features. Battery technologies can provide energy storage for some applications, but are not economically well-suited for long duration charge/discharges, such as load-leveling of renewable energy. Consequently, development of new energy storage devices will augment the existing grid and reduce the capital investment in construction upgrades. As ever-increasing mandates for renewable energy are implemented, lower-cost energy storage solutions for renewable energy will be necessary to keep electricity costs low for consumers.

13 HYDRO ENERGY↗