Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Improved power conversion efficiency for bulk heterojunction solar cells incorporating CdTe-CdSe nanoheterostructure acceptors and a conjugated polymer donor

In this paper, we report photovoltaic devices based on composites of a branched nanoheterostructure containing a CdTe core and CdSe arms, CdTe(c)-CdSe(a), combined with either poly(3-hexylthiophene), P3HT, or poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)], PCPDTBT, with solar power conversion efficiencies of 1.2% and 1.8%, respectively. Finally, a comparison with previously reported composite devices of a related branched nanoheterostructure: CdSe(c)-CdTe(a) reveals an improved device performance that is attributed to a better electron percolation pathway provided by the dominant, higher electron affinity CdSe arms of the nanoheterostructures.

14 SOLAR ENERGY↗
DOE OSTI2015

Processes of conversion of a hot metal particle into aerogel through clusters

Processes are considered for conversion into a fractal structure of a hot metal micron-size particle that is located in a buffer gas or a gas flow and is heated by an external electric or electromagnetic source or by a plasma. The parameter of this heating is the particle temperature, which is the same in the entire particle volume because of its small size and high conductivity. Three processes determine the particle heat balance: particle radiation, evaporation of metal atoms from the particle surface, and heat transport to the surrounding gas due to its thermal conductivity. The particle heat balance is analyzed based on these processes, which are analogous to those for bulk metals with the small particle size, and its high temperature taken into account. Outside the particle, where the gas temperature is lower than on its surface, the formed metal vapor in a buffer gas flow is converted into clusters. Clusters grow as a result of coagulation until they become liquid, and then clusters form fractal aggregates if they are removed form the gas flow. Subsequently, associations of fractal aggregates join into a fractal structure. The rate of this process increases in medium electric fields, and the formed fractal structure has features of aerogels and fractal fibers. As a result of a chain of the above processes, a porous metal film may be manufactured for use as a filter or catalyst for gas flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Power Conversion Efficiencies of Perovskite and Dye-Sensitized Solar Cells under Various Solar Radiation Intensities

We present the results of a comparative study on behaviour of the photovoltaic parameters in perovskite (PSC), dye-sensitized (DSC) and crystalline silicon (c-Si) solar cells under various intensities of solar radiation (10–1000 W/m{sup 2}). It was found that unlike c-Si, the power conversion efficiencies of PSC and DSC under low radiation intensities are comparable with the corresponding values observed under standard light intensity of 1000 W/m{sup 2} (AM1.5G). We have shown that high performance of the PSC and DSC at low and diffuse lighting conditions can be explained by the properties of the nanostructured TiO{sub 2}-based photoelectrodes depending on the structure, morphology and the thickness of the TiO{sub 2} layers.

14 SOLAR ENERGY↗
DOE OSTI2017

The interference enhancement of light polarization conversion from structures with a quantum well

The optical activity of crystals leads to the occurrence of ellipticity at the reflection of light which is linearly polarized in the interface plane or normally to it. The effect experimentally discovered in the investigated structures with quantum wells is due to a spin-orbit interaction and birefringence. The qualitative dependence of the effect on the change in the orientation of the linear polarization of the incident light has been revealed. A sharp increase in the degree of the polarization conversion in a narrow range of incidence angles for light polarized in the incidence plane has been detected. The latter is due to the influence of the interference of the reflected wave on the structure thickness.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Rise Kinetics of Up-Conversion Luminescence of the LiY{sub 0.8}Yb{sub 0.2}F{sub 4}:Tm{sup 3+} (0.2 at %) Crystal with Pulsed Excitation

The regression analysis of the rise kinetics of up-conversion luminescence of the LiY{sub 0.8}Yb{sub 0.2}F{sub 4}:Tm{sup 3+} (0.2 at %) crystal is performed. The kinetics curve is obtained with rectangular pulsed excitation by radiation from a laser diode (IR LD) with a wavelength of λ{sub p} = 933 nm. The most important—in these experimental conditions—mechanisms of the energy transfer from Yb{sup 3+} ions to Tm{sup 3+} ions are established, which are responsible for the transitions between the ground {sup 3}H{sub 6} and excited {sup 3}F{sub 4}, {sup 3}H{sub 4}, {sup 1}G{sub 4}, {sup 1}D{sub 2}, and {sup 1}I{sub 6} terms of the Tm{sup 3+} ions. The durations of the relevant energy transfer processes are determined. It is shown that the energy transfer between rare earth ions in the LiY{sub 0.8}Yb{sub 0.2}F{sub 4}:Tm{sup 3+} (0.2 at %) crystal occurs through the dipole–dipole interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Energy Conversion in Gd{sub 2}O{sub 3} Nanocrystals Doped with Er{sup 3+} Ions

The conversion of the energy absorbed by cubic Gd{sub 2}O{sub 3} nanocrystals doped with Er{sup 3+} and codoped with Yb{sup 3+} and Zn{sup 2+} ions in a temperature range of 95–425 K is studied at various concentrations of dopants. The photoluminescence spectra confirm the ability of excitation energy transfer from the Gd{sup 3+} ions or the matrix towards the Er{sup 3+} ions. The population of upper excited states in the Er{sup 3+} ions depends on the way of excitation, which cause the alterations in the probability of multiphonon relaxation from the excited states to the radiative levels. The kinetics of photoluminescence decay exhibit the possible energy transfer from anionic defects created by extra doping with Zn{sup 2+} ions. The temperature dependences of the upconversion luminescence yield for emission lines of 560 and 660 nm are found to be different.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Electrophysical Setup for the Conversion of Natural Gas at Atmospheric Pressure

The conversion of hydrocarbons during the treatment of a methane–ethane mixture with a barrier discharge in an electrophysical setup was experimentally studied. The theoretical estimation of plasmakinetic processes occurring in a discharge was performed for the developed plasmachemical reactor using the ZDPlasKin algorithm. Experimental results were in agreement with theoretical estimates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

High-Efficiency Conversion of High-Power-Density Laser Radiation

AlGaAs/GaAs-based semiconductor photovoltaic converters (PVCs) of laser radiation, capable of operating at an illuminance up to 9 kW/cm{sup 2} with retained isothermal state have been studied. This state was confirmed by the logarithmic shape of dependences of the open-circuit voltage on the power density of incident laser radiation. At maximum illuminance, the open-circuit voltage level was close to 1.33 V. It is shown that the proposed PVCs can provide laser radiation conversion at an 840-nm wavelength with efficiency above 51% at an incident radiation power density of 2.5 kW/cm{sup 2}.

14 SOLAR ENERGY↗
DOE OSTI2025

New Materials for Photoelectrochemical Energy Conversion

This review concerns light-to-chemical energy conversion, focusing on approaches that could be driven by terrestrial sunlight to produce hydrogen and/or reduce carbon dioxide. Recent advances in photocatalytic (PC) and photoelectrocatalytic (PEC) materials are covered. In both approaches, the electron-hole pairs that are created by photon absorption must travel in specific directions to the sites that mediate multielectron bond making/breaking redox reactions. Thermodynamic requirements for materials stability are described, although some recently discovered materials appear to be exceptions. For PC materials, the importance of rate matching between reduction and oxidation processes and the mass transfer of intermediates and products is emphasized. Surprisingly, metal sulfides appear to be promising for PC carbon dioxide reduction. For PEC materials, recent work elucidating the elementary step mechanism for oxygen evolution on metal oxides and the discovery of chalcogen-based photocathode materials capable of sustained light-driven CO 2 reduction are discussed.

energy conversion↗
DOE OSTI2017

Solar-Driven Reduction of 1 atm CO 2 to Formate at 10% Energy-Conversion Efficiency by Use of a TiO 2 -Protected III-V Tandem Photoanode in Conjunction with a Bipolar Membrane and a Pd/C Cathode Electrocatalyst

A solar-driven CO 2 -reduction (CO 2 R) cell, made up of a tandem GaAs/InGaP/TiO 2 /Ni photoanode in 1.0 M KOH(aq) (pH=13.7) to facilitate the oxygen-evolution reaction (OER), a Pd/C nanoparticle-coated Ti mesh cathode in 2.8 M KHCO 3 (aq) (pH=8.0) to perform the CO 2 R reaction, and a bipolar membrane to allow for steady-state operation of the catholyte and anolyte at different bulk pH values, was built. At the operational current density of 8.5 mA cm -2 , in 2.8 M KHCO 3 (aq), the cathode exhibited <100 mV overpotential and >94% Faradaic efficiency for the reduction of 1 atm of CO 2 (g) to formate. The anode exhibited 320 ± 7 mV overpotential for the OER in 1.0 M KOH(aq), and the bipolar membrane exhibited ~480 mV voltage loss with minimal product crossover as well as >90% and >95% selectivity for protons and hydroxide ions, respectively. The solar-driven CO 2 R cell converted sunlight to fuels at an energy-conversion efficiency of ~10%.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Anodic Conversion of Cyclohexane, Methylcyclohexane, and 2-Propanol: Towards a Regenerable Liquid-Fed Fuel Cell

Liquid Organic Hydrogen Carriers (LOHCs) are promising for hydrogen and energy storage but require endothermic catalytic dehydrogenation. An alternative approach is a regenerable liquid-fed fuel cell which spontaneously converts an organic carrier from its hydrogen-rich to hydrogen-lean form while generating electrical power. The anodic electrooxidation of cyclohexane, methylcyclohexane and 2-propanol in a high temperature polybenzimidazole/phosphoric acid (PBI/PA) PEM fuel cell was investigated along with a quantitative analysis of reaction products. Cyclohexane and methylcyclohexane were predominantly converted to CO 2 with only a trace formation of the corresponding aromatic and cyclic olefin byproducts. This near-to-complete oxidation of the fuels is in sharp contrast to previous reports of a selective conversion of cyclohexane to benzene, with no CO 2 byproducts. In experiments with 2-propanol, acetone was produced, with diisopropylether, propylene and CO 2 as only minor side products. However, the extent of CO 2 formation greatly increased at higher current densities.

25 ENERGY STORAGE↗
DOE OSTI2015

The Selective Electrochemical Conversion of Preactivated CO 2 to Methane

This work reports the selective electrochemical conversion of CO 2 to methane, the reverse reaction of fossil fuel combustion. This reaction is facilitated by preactivation of the CO 2 molecule with an N-heterocyclic carbene (NHC) to form a zwitterionic species in the first step. In the presence of Ni(cyclam) 2+ and CF 3 CH 2 OH, this species is shown to undergo further electrochemical reduction of the bound-CO 2 fragment at glassy carbon cathodes in dichloromethane electrolyte solution. Labeling studies confirm the origin of the carbon and protons in the methane product are the preactivated CO 2 and trifluoroethanol respectively.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Evaluation of bacterial hosts for conversion of lignin-derived p-coumaric acid to 4-vinylphenol

Abstract Hydroxycinnamic acids such as p -coumaric acid (CA) are chemically linked to lignin in grassy biomass with fairly labile ester bonds and therefore represent a straightforward opportunity to extract and valorize lignin components. In this work, we investigated the enzymatic conversion of CA extracted from lignocellulose to 4-vinylphenol (4VP) by expressing a microbial phenolic acid decarboxylase in Corynebacterium glutamicum , Escherichia coli, and Bacillus subtilis . The performance of the recombinant strains was evaluated in response to the substrate concentration in rich medium or a lignin liquor and the addition of an organic overlay to perform a continuous product extraction in batch cultures. We found that using undecanol as an overlay enhanced the 4VP titers under high substrate concentrations, while extracting > 97% of the product from the aqueous phase. C. glutamicum showed the highest tolerance to CA and resulted in the accumulation of up to 187 g/L of 4VP from pure CA in the overlay with a 90% yield when using rich media, or 17 g/L of 4VP with a 73% yield from CA extracted from lignin. These results indicate that C. glutamicum is a suitable host for the high-level production of 4VP and that further bioprocess engineering strategies should be explored to optimize the production, extraction, and purification of 4VP from lignin with this organism.

4-hydroxystyrene↗
DOE OSTI2018

Experimental Demonstration of 28.2% Thermophotovoltaic Conversion Efficiency

Efficient luminescence extraction enables us to use the photovoltaic band gap as the spectral filter for thermophotovoltaics. Using this concept, we demonstrate a 28.2% conversion efficiency, higher than the previously reported value for the range of the emitter temperature (700 degrees C-1250 degrees C) used.

14 SOLAR ENERGY↗
DOE OSTI2021

Microwave-optical quantum frequency conversion

Photons at microwave and optical frequencies are principal carriers for quantum information. While microwave photons can be effectively controlled at the local circuit level, optical photons can propagate over long distances. High-fidelity conversion between microwave and optical photons will allow the distribution of quantum states across different quantum technology nodes and enhance the scalability of hybrid quantum systems toward a future “Quantum Internet.” Despite a frequency difference of five orders of magnitude, there has been significant progress recently toward the transfer between microwave and optical photons with steadily improved efficiency in a coherent and bidirectional manner. In this review, we summarize this progress, emphasizing integrated device approaches, and provide a perspective for device implementation that enables quantum state transfer and entanglement distribution across microwave and optical domains.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2015

Development of High Yield Feedstocks and Biomass Conversion Technology for Renewable Energy

This project had two main goals. The first goal was to evaluate several high yielding tropical perennial grasses as feedstock for biofuel production, and to characterize the feedstock for compatible biofuel production systems. The second goal was to assess the integration of renewable energy systems for Hawaii. The project focused on high-yield grasses (napiergrass, energycane, sweet sorghum, and sugarcane). Field plots were established to evaluate the effects of elevation (30, 300 and 900 meters above sea level) and irrigation (50%, 75% and 100% of sugarcane plantation practice) on energy crop yields and input. The test plots were extensive monitored including: hydrologic studies to measure crop water use and losses through seepage and evapotranspiration; changes in soil carbon stock; greenhouse gas flux (CO 2 , CH 4 , and N 2 O) from the soil surface; and root morphology, biomass, and turnover. Results showed significant effects of environment on crop yields. In general, crop yields decrease as the elevation increased, being more pronounced for sweet sorghum and energycane than napiergrass. Also energy crop yields were higher with increased irrigation levels, being most pronounced with energycane and less so with sweet sorghum. Daylight length greatly affected sweet sorghum growth and yields. One of the energy crops (napiergrass) was harvested at different ages (2, 4, 6, and 8 months) to assess the changes in feedstock characteristics with age and potential to generate co-products. Although there was greater potential for co-products from younger feedstock, the increased production was not sufficient to offset the additional cost of harvesting multiple times per year. The feedstocks were also characterized to assess their compatibility with biochemical and thermochemical conversion processes. The project objectives are being continued through additional support from the Office of Naval Research, and the Biomass Research and Development Initiative. Renewable energy assessments included: biomass feedstocks currently being produced by Hawaiian Commercial & Sugar Co., and possibilities of producing methane from agricultural and livestock wastes and the potential of photovoltaic systems for irrigation pumping at HC&S. Finally, the impact of a micro-hydroelectric system on a small-farm economics and the local community was assessed.

09 BIOMASS FUELS↗
DOE OSTI2015

Recovery Act. Demonstration of a Pilot Integrated Biorefinery for the Efficient, Direct Conversion of Biomass to Diesel Fuel

The Renewable Energy Institute International, in collaboration with Greyrock Energy and Red Lion Bio-Energy (RLB) has successfully demonstrated operation of a 25 ton per day (tpd) nameplate capacity, pilot, pre-commercial-scale integrated biorefinery (IBR) plant for the direct production of premium, “drop-in”, synthetic fuels from agriculture and forest waste feedstocks using next-generation thermochemical and catalytic conversion technologies. The IBR plant was built and tested at the Energy Center, which is located in the University of Toledo Medical Campus in Toledo, Ohio.

03 NATURAL GAS↗
DOE OSTI2014

Neutronics Conversion Analyses of the Laue-Langevin Institute (ILL) High Flux Reactor (RHF)

The following report describes the neutronics results obtained with the MCNP model of the RHF U7Mo LEU reference design that has been established in 2010 during the feasibility analysis. This work constitutes a complete and detailed neutronics analysis of that LEU design using models that have been significantly improved since 2010 and the release of the feasibility report. When possible, the credibility of the neutronics model is tested by comparing the HEU model results with experimental data or other codes calculations results. The results obtained with the LEU model are systematically compared to the HEU model. The changes applied to the neutronics model lead to better comparisons with experimental data or improved the calculation efficiency but do not challenge the conclusion of the feasibility analysis. If the U7Mo fuel is commercially available, not cost prohibitive, a back-end solution is established and if it is possible to manufacture the proposed element, neutronics analyses show that the performance of the reactor would not be challenged by the conversion to LEU fuel.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗