Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “connect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Model validation - A connection between robust control and identification

The gap between the models used in control synthesis and those obtained from identification experiments is considered by investigating the connection between uncertain models and data. The model validation problem addressed is: given experimental data and a model with both additive noise and norm-bounded perturbations, is it possible that the model could produce the observed input-output data? This problem is studied for the standard H-infinity/mu framework models. A necessary condition for such a model to describe an experimental datum is obtained. For a large class of models in the robust control framework, this condition is computable as the solution of a quadratic optimization problem.

Smith, Roy S.↗

Radio jets in colliding galaxies: Testing the interaction-activity connection

The idea that galaxy interactions and merging are related to the generation of starburst and AGN activity in galactic nuclei has been the subject of intensive investigations over the past several years and is still a matter of lively debate. Peculiar morphologies, indicative of tidal interactions, have been detected in high-luminosity radio galaxies, in quasars, and in ultraluminous IRAS galaxies. In addition, low-luminosity radio and active galaxies show similar evidence for a recent merger or for nearby companions. In a recent CCD optical study of galaxies selected on the basis that they all contain well defined radio jets, it was found that almost half of the sample consists of pairs of elliptical galaxies. Many of these low-luminosity radio galaxies with companions show a well defined distorted radio jet structure at the VLA scale with an S- or C-shaped morphology. We have developed a general numerical simulation algorithm for ballistic radio jets with the intention of applying this model to the study of the bent jets seen in colliding pairs of galaxies and with the hope of testing the well documented interaction-activity connection. In our model the morphological evolution of the jets is determined by their response to the simple mechanical forces (i.e., gravity and ram pressure) imposed on them from both the host and the companion galaxies. Radiative losses, jet precession, magnetic effects, relativistic terms, and hydrodynamic instabilities have all been ignored. Starting with a previously derived collision model for the interacting pair of elliptical galaxies NGC 4782/4783, we have used our algorithm to simulate the specific two-sided jet morphology seen in the radio source 3C 278, associated with NGC 4782. This is the first time that such jet simulations have been produced for a galaxy pair whose relative orbit was determined independently from the jet modeling.

Borne, Kirk D.↗

Computer-assisted three-dimensional reconstruction and simulations of vestibular macular neural connectivities

Results of computer-assisted research concerned with the three-dimensional reconstruction and simulations of vestibular macular neural connectivities are summarized. The discussion focuses on terminal/receptive fields, the question of synapses across the striola, endoplasmic reticulum and its potential role in macular information processing, and the inner epithelial plexus. Also included are preliminary results of computer simulations of nerve fiber collateral functioning, an essential step toward the three-dimensional simulation of a functioning macular neural network.

Ross, Muriel D.↗

Direct particle simulation on the Connection Machine CM-2

Particle simulation is a useful technique for analyzing low density flows. The Connection Machine CM-2 is a useful test bed for studying the fine-grain data objects decomposition and the coarse-grain domain decomposition single instruction multiple datastream (SIMD) approaches to particle simulation. Both approaches are investigated for the model problem of uniform flow through a channel and the algorithms required for the SIMD domain decomposition approach are presented. An unresolved issue with the domain decomposition approach is the effect of a poor partitioning on flows with real geometries. Initial results with the channel flow problem indicate that a poor partitioning has only a small detrimental effect on the overall performance.

Dagum, L.↗

Laplace's equation and the Dirichlet-Neumann map in multiply connected domains

A variety of problems in material science and fluid dynamics require the solution of Laplace's equation in multiply connected domains. Integral equation methods are natural candidates for such problems, since they discretize the boundary alone, require no special effort for free boundaries, and achieve superalgebraic convergence rates on sufficiently smooth domains in two space dimensions, regardless of shape. Current integral equation methods for the Dirichlet problem, however, require the solution of M independent problems of dimension N, where M is the number of boundary components and N is the total number of points in the discretization. In this paper, we present a new boundary integral equation approach, valid for both interior and exterior problems, which requires the solution of a single linear system of dimension N + M. We solve this system by making use of an iterative method (GMRES) combined with the last multipole method for the rapid calculation of the necessary matrix vector products. For a two-dimensional system with 200 components and 100 points on each boundary, we gain a speedup of a factor of 100 from the new analytic formulation and a factor of 50 from the fast multipole method. The resulting scheme brings large scale calculations in extremely complex domains within practical reach.

Greenbaum, A.↗

Effect of out-of-roundness on the performance of a diesel engine connecting-rod bearing

In this paper, the dynamic performance of the Ruston and Hornsby VEB diesel engine connecting-rod bearing with circular and out-of-round profiles is analyzed. The effect of cavitation is considered by using a cavitation algorithm, which mimics JFO boundary conditions. The effect of mass inertia is accounted for by solving coupled nonlinear equations of motion. The journal profiles considered are circular, elliptical, semi-elliptical, and three lobe epicycloid. The predicted journal trajectory and other performance parameters for one complete load cycle are presented for all of the out-of-round profiles and are also compared with the predictions for the circular bearing.

Vijayaraghavan, D.↗

The Effect of Connecting-passage Diameter on the Performance of a Compression-ignition Engine with a Precombustion Chamber

Results of motoring tests are presented showing the effect of passage diameter on chamber and cylinder compression pressures, maximum pressure differences, and f.m.e.p. over a speed range from 300 to 1,750 r.p.m. Results of engine performance tests are presented which show the effect of passage diameter on m.e.p., explosion pressures, specific fuel consumption, and rates of pressure rise for a range of engine speeds from 500 to 1,500 r.p.m. The cylinder compression pressure, the maximum pressure difference, and the f.m.e.p. decreased rapidly as the passage diameter increased to 29/64 inch, whereas further increase in passage diameter effected only a slight change. The most suitable passage diameter for good engine performance and operating characteristics was 29/64 inch. Passage diameter became less critical with a decrease in engine speed. Therefore, the design should be based on maximum operating speed. Optimum performance and satisfactory combustion control could not be obtained by means of any single diameter of the connecting passage.

Moore, C S↗

Starting characteristics and combustion performance of magnesium slurry in 6.5-inch-diameter ram-jet engine mounted in connected-pipe facility

The starting characteristics and combustion performance of slurry type fuels, consisting of 50 percent magnesium powder in a hydrocarbon carrier, have been investigated in a flight-type, 6.5-inch-diameter ram-jet engine in a connected-pipe facility. Quick, dependable starting of the engine was obtained by the use of a disk which blocked part of the combustor area downstream of the flame holder. Acceptable performance was achieved with a short fuel-air mixing length by the development of a fuel-distribution control sleeve.

COMBUSTION - RAM-JET ENGINES↗

The structure of Airy's stress function in multiply connected regions

In solving two-dimensional problems using Airy's stress function for multiply connected regions, the form of the function depends on the dislocations and boundary forces present. The structure of Airy's function is shown to consist of a part expressible in terms of boundary forces and a part expressible in the manner of Poincare. Meanings of the constants occurring in Poincare's expression are discussed.

FRAMES, GRIDWORKS AND TRUSSES↗

Optimal cube-connected cube multiprocessors

Many CFD (computational fluid dynamics) and other scientific applications can be partitioned into subproblems. However, in general the partitioned subproblems are very large. They demand high performance computing power themselves, and the solutions of the subproblems have to be combined at each time step. The cube-connect cube (CCCube) architecture is studied. The CCCube architecture is an extended hypercube structure with each node represented as a cube. It requires fewer physical links between nodes than the hypercube, and provides the same communication support as the hypercube does on many applications. The reduced physical links can be used to enhance the bandwidth of the remaining links and, therefore, enhance the overall performance. The concept and the method to obtain optimal CCCubes, which are the CCCubes with a minimum number of links under a given total number of nodes, are proposed. The superiority of optimal CCCubes over standard hypercubes was also shown in terms of the link usage in the embedding of a binomial tree. A useful computation structure based on a semi-binomial tree for divide-and-conquer type of parallel algorithms was identified. It was shown that this structure can be implemented in optimal CCCubes without performance degradation compared with regular hypercubes. The result presented should provide a useful approach to design of scientific parallel computers.

Sun, Xian-He↗

Polyimides containing amide and perfluoroisopropylidene connecting groups

New, thermooxidatively stable polyimides were prepared from the reaction of aromatic dianhydrides containing isopropylidene bridging groups with aromatic diamines containing amide connecting groups between the rings. Several of these polyimides were shown to be semi-crystalline as evidenced by wide angle x ray scattering and differential scanning calorimetry. Most of the polyimides form tough, flexible films with high tensile properties. These polyimide films exhibit enhanced solubility in organic solvents.

Dezern, James F.↗

Simulation of particle mixing by turbulent convective flows on the connection machine

Mixing of particles by chaotic flow fields was simulated on the Connection Machine. Each cell was assigned to the processor, and the coordinates of particles residing on the cell were kept in the local memory of the processor. This approach implies the exchange between the local memories, when a particle moves from one cell to another. Approximately 10 exp 5 particles were injected into a time-dependent flow field obtained by solving the nonlinear system of partial differential equations describing turbulent thermal convection. The flow field was calculated on a CRAY, and data were transferred to a CM-200 through a high-speed HIPPI channel.

Malevsky, A. V.↗

Using the International Directory Network and connected information systems for research in the Earth and space sciences

Many researchers are becoming aware of the International Directory Network (IDN), an interconnected federation of international directories to Earth and space science data. Are you aware, however, of the many Earth-science-relevant information systems which can be accessed automatically from the directories? After determining potentially useful data sets in various disciplines through directories such as the Global Change Master Directory, it is becoming increasingly possible to get detailed information about the correlative possibilities of these data sets through the connected guide/catalog and inventory systems. Such capabilities as data set browse, subsetting, analysis, etc. are available now and will be improving in the future.

Thieman, J. R.↗

Real-Time Connected-Element Radio-Interferometer System

Real-time connected-element radio-interferometer system incorporates two receiving stations, separated by relatively short baseline of only 21 km, communicating via fiber-optic data and timing links. Provides accuracies of 50 to 100 nanoradians for measuring angular positions of interplanetary spacecraft and extra-galactic quasers. Overall system and various components adaptable to such terrestrial uses as navigation and distribution of precise time and frequency reference signals.

Edwards, Charles D.↗

Quick-Connect, Slow-Disconnect Nut

Proposed quick-connect, slow-disconnect nut installs simply by pushing it onto standard bolt or threaded stud. Once installed, removed only by unscrewing it in manner of conventional nut.

Weddendorf, Bruce↗

Quick-Connect, Slow-Disconnect Bolt

Proposed bolt functions similarly to device described in article "Quick-Connect, Slow-Disconnect Nut" (MFS-28833). Bolt installed in standard threaded hole simply by pushing it into hole. Once inserted, bolt withdrawn only by turning it in conventional way.

Weddendorf, Bruce↗

Designing An Adaptor To Connect Rocket Stages

Report describes design of light-weight truss structure to serve as adaptor to connect two rocket stages. Larger stage is Centaur rocket, on which provided eight attachment points arranged in circle. Smaller stage is Thiokol Star 48b rocket, which includes round attachment flange. For mating with attachment flange, design provides for grooved slats at upper ends of struts. Weight of truss structure less than corresponding stiffened conical shell.

Gann, Lisa L.↗