Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “base effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

The use of price-based demand response as a resource in electricity system planning

Utilities have conducted IRP for decades to consider both supply- and demand-side resources to meet bulk power system needs. More recently, an increasing number of states are requiring regulated utilities to file plans that identify distribution system needs, including DERs that can avoid or defer certain types of traditional utility investments cost-effectively. Price-based demand response (DR) is an underutilized resource that could substantially contribute to load flexibility. We find that evaluation of price-based DR as a solution to meet identified electricity system needs is uncommon at both planning processes. Where price-based DR is considered as a solution, methodologies are often deficient in the characterization and treatment of this resource. Based on our analysis of utility filings and state requirements, this brief provides recommendations for improving consideration of price-based DR in the context of long-term planning for bulk power and distribution systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

The depolarization of Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} ferroelectrics by cylindrical radially expanding shock waves and its utilization for miniature pulsed power

The effects of depolarization of Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} (PZT 52/48) poled ferroelectrics by cylindrical radially expanding shock waves propagated along and across the polarization vector P{sub 0} were experimentally detected. Miniature (total volume 100 cm{sup 3}) autonomous generators based on these effects were capable of producing output voltage pulses with amplitudes up to 25 kV and output energies exceeding 1 J.

36 MATERIALS SCIENCE↗

Estimation of Dose from Potential Radionuclide Emissions from the Sample Preparation Laboratory at the Materials and Fuels Complex

The Sample Preparation Laboratory (SPL) at the Materials and Fuels Complex will perform sample preparation, examination, and mechanical-property testing of highly irradiated materials. The purpose of this report is to document calculation of the estimated dose at public receptor locations from potential radionuclide releases to the atmosphere from SPL. Atmospheric dispersion and dose calculations were performed with the computer model CAP88-PC Version 4 in accordance with the requirements of Code of Federal Regulations (CFR), Title 40, “Protection of the Environment,” Part 61, “National Emission Standards for Hazardous Air Pollutants (NESHAPs),” Subpart H, “National Emission Standards for Emissions of Radionuclides Other than Radon from Department of Energy Facilities” (40 CFR 61, Subpart H 2010). Emission potentials were calculated based on the methodology in 40 CFR Part 61, Appendix D and additional guidance/approval by EPA Region 10 [see letter from Donald Dossett (EPA Region 10) to Tim Safford (DOE-ID), Oct 19, 2017 (CCN 241475)] for solid materials that undergo heating. Estimates of total effective dose are based on low-level chronic exposure. The potential maximum dose to a member of the public was calculated to be 0.02 mrem/year based on an estimated 16 g of the 30 kg source term (0.053%) being exposed to very high temperatures associated with electrical-discharge machining (EDM) and the remaining material heated to 100°C. Calculations show the maximum dose could be as high as 0.05 mrem/year if the remaining material were heated to 1400°C (i.e., the melting point of stainless steel). The potential maximum dose to a public receptor from emissions at SPL is not expected to exceed 0.1 mrem/year (1% of the standard) so long as the material impacted by EDM does not exceed 56 g (3.5 times the expected mass of 16 g and less than 0.2% of the total source term), and the remaining material is not heated to temperatures greater than 1400°C. It should be noted that credit for HEPA filtration does not impact the dose results because the dose is dominated by radionuclides that have exceeded their boiling point; thus, no credit for HEPA filtration may be applied to the emission factor.

99 GENERAL AND MISCELLANEOUS↗

Effects of Sodium and Tungsten Promoters on Mg 6 MnO 8 -Based Core–Shell Redox Catalysts for Chemical Looping—Oxidative Dehydrogenation of Ethane

The present study investigates the effect of sodium and tungsten promoters on Mg 6 MnO 8 -based redox catalysts in a chemical looping oxidative dehydrogenation (CL-ODH) scheme. CL-ODH has the potential to significantly lower energy consumption and CO 2 /NO x emissions for ethylene production compared with conventional steam cracking. Sodium tungstate (Na 2 WO 4 ) was previously shown to be an effective promoter for Mg 6 MnO 8 -based redox catalysts. Overall, the CL-ODH reaction proceeds via parallel gas-phase cracking of ethane and selective combustion of H 2 on the surface of the Na 2 WO 4 -promoted redox catalyst. Reaction testing indicates that both Na and W are necessary to form Na 2 WO 4 and to achieve high ethylene selectivity. A Na:W ratio lower than 2:1 lead to significant formation of additional mixed tungsten oxide phases and decreases ethylene selectivity. Further characterizations based on low-energy ion scattering (LEIS) and differential scanning calorimetry (DSC) indicate that the NaW promoter forms a molten shell around the Mg6MnO8 redox catalyst. Methanol TPSR and in situ DRIFTS experiments indicate that the promoter significantly suppresses the number of basic sites on Mg 6 MnO 8 . 18 O– 16 O exchange experiments reveal that the promoter decreases the rate of oxygen exchange. O 2 cofeed studies indicate that below the melting temperature of Na 2 WO 4 , H 2 and CO conversions are both inhibited, but above the melting temperature, H 2 combustion significantly increased while CO combustion is still inhibited. On the basis of extensive characterizations, it was determined that H 2 is primarily combusted at the gas–Na 2 WO 4 molten shell interface via redox reactions of the tungsten salt, likely between the WO 4 2– (tungstate) and WO 3 – (tungsten bronze).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved Kelbg Potentials for Z > 1 and Application to Carbon Plasmas

In this work, we present a general form for the electron‐ion diffractive potential derived from the quantum pair density matrix and fit to the improved Kelbg potential for atomic numbers up to $Z = 54$. We apply classical molecular dynamics using the improved Kelbg potential for carbon with various forms of the Pauli potential to compute internal energies and pressures for hot, dense plasma conditions. Our results are compared to an equation of state model based on path integral Monte Carlo and density functional theory simulations to examine the extent to which the improved Kelbg potential reproduces the internal energy and pressure of carbon plasmas. The regions of validity for carbon agree generally with those derived previously for hydrogen once pressure ionization effects are incorporated. Based on our carbon results and previously published hydrogen studies, we discuss the general applicability and limitations of these potentials for equation of state studies in warm dense matter and high energy density plasmas.

general physics↗

Coagulation chemistries for silica removal from cooling tower water.

The formation of silica scale is a problem for thermoelectric power generating facilities, and this study investigated the potential for removal of silica by means of chemical coagulation from source water before it is subjected to mineral concentration in cooling towers. In Phase I, a screening of many typical as well as novel coagulants was carried out using concentrated cooling tower water, with and without flocculation aids, at concentrations typical for water purification with limited results. In Phase II, it was decided that treatment of source or make up water was more appropriate, and that higher dosing with coagulants delivered promising results. In fact, the less exotic coagulants proved to be more efficacious for reasons not yet fully determined. Some analysis was made of the molecular nature of the precipitated floc, which may aid in process improvements. In Phase III, more detailed study of process conditions for aluminum chloride coagulation was undertaken. Lime-soda water softening and the precipitation of magnesium hydroxide were shown to be too limited in terms of effectiveness, speed, and energy consumption to be considered further for the present application. In Phase IV, sodium aluminate emerged as an effective coagulant for silica, and the most attractive of those tested to date because of its availability, ease of use, and low requirement for additional chemicals. Some process optimization was performed for coagulant concentration and operational pH. It is concluded that silica coagulation with simple aluminum-based agents is effective, simple, and compatible with other industrial processes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Recent Advances in Understanding Radiation Damage in Reactor Cavity Concrete

License renewal up to 60 years and the possibility of subsequent license renewal to 80 years has resulted in a renewed focus on long-term aging of materials at nuclear power plants (NPPs) including concrete. Large irreplaceable sections of most nuclear generating stations include concrete. The Expanded Materials Degradation Analysis, jointly performed by the Department of Energy, the Nuclear Regulatory Commission and Nuclear Industry, identified the urgent need to develop a consistent knowledge base on irradiation effects in concrete (Graves et al., (2014)). Much of the historical mechanical performance data of irradiated concrete (Hilsdorf et al., (1978)) does not accurately reflect typical radiation conditions in NPPs or conditions out to 60 or 80 years of radiation exposure (Kontani et al., (2011)). To address these potential gaps in the knowledge base, the Electric Power Research Institute and Oak Ridge National Laboratory, are working to better understand radiation damage as a degradation mechanism. This paper outlines recent progress toward: 1) assessing the radiation environment in concrete biological shields and defining the upper bound of the neutron and gamma dose levels expected in the biological shield for extended operation, and estimating adsorbed dose, 2) evaluating opportunities to harvest and test irradiated concrete from international NPPs, 3) evaluating opportunities to irradiate prototypical concrete and its components under accelerated neutron and gamma dose levels to establish conservative bounds and inform damage models, 4) developing improved models to enhance the understanding of the effects of radiation on concrete and 5) establishing an international collaborative research and information exchange effort to leverage capabilities and knowledge including developing cooperative test programs to improve confidence in data obtained from various concretes and from accelerated irradiation experiments.

Cocrete Bioshield↗

Electron and spin transport in adiabatic quantum pumps based on graphene nanoribbons

The adiabatic quantum pump effect in double-barrier structures based on graphene nanoribbons has been analyzed numerically. The charge transmitted through the system in one cycle of variation of pumping potentials (barrier heights) has been calculated. This charge is shown to be quantized under certain conditions. The possibility of the generation of not only electron currents but also spin and purely spin ones is considered. In devices based on zigzag nanoribbons, the spin current emerges when taking into account their magnetic structure and applying a transverse electric field breaking the symmetry between the up and down spins. In devices based on armchair nanoribbons without any magnetic structure, this symmetry breaks when using a ferromagnetic insulator (deposited, for example, on the region between gates) through the proximity effect.

36 MATERIALS SCIENCE↗

Selective Hydrogenation of Acetylene to Ethylene over Bimetallic Catalysts

Ni/α-Al 2 O 3 catalyst and a series of bimetallic catalysts including Pd–Ag, Ni–Pd, Ni–Zn, Ni–Ag, and Ni–Ga were synthesized, characterized, and tested in selective hydrogenation of acetylene to ethylene. The bimetallic catalyst Ni–Ga exhibited almost the same ethylene selectivity compared to Pd–Ag based catalyst. The effect of the Ni/Ga ratio on the catalytic activity and selectivity to ethylene in acetylene hydrogenation was evaluated. Characterization by transmission electron microscopy, X-ray diffraction, hydrogen temperature-programmed reduction, and X-ray photoelectron spectroscopy was carried out to identify active phases on Ni–Ga based catalysts, which was correlated with catalytic performance and the reaction mechanism occurring over the catalyst. Here, the presence of Ga in Ni–Ga lattice structure confined the movement of dissociated H* and reduced the adsorption binding energy of ethylene, which could prevent overhydrogenation of acetylene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development and validation of quasi-steady-state heat pump water heater model having stratified water tank and wrapped-tank condenser

Heat pump water heater systems (HPWH) introduce new challenges for design and modeling tools, because they require vapor compression system balanced with a water storage tank. In addition, a wrapped-tank condenser coil has strong coupling with a stratified water tank, which leads HPWH simulation to a transient process. To tackle these challenges and deliver an effective, hardware-based HPWH equipment design tool, a quasi-steady-state HPWH model was developed based on the DOE/ORNL Heat Pump Design Model (HPDM). Two new component models were added via this study. One is a one-dimensional stratified water tank model, an improvement to the open-source EnergyPlus water tank model, by introducing a calibration factor to account for bulk mixing effect due to water draws, circulations, etc. The other is a wrapped-tank condenser coil model, using a segment-to-segment modeling approach. In conclusion, the HPWH system model was validated against available experimental data. After that, the model was used for parametric simulations to determine the effects of various design factors.

42 ENGINEERING↗

Event‐Based Training in Label‐Limited Regimes

Abstract The distribution of attributes assigned using data on independent sensors for a specific source, for example, magnitude, can be richly descriptive for final event characterization and associated uncertainty. Attribute distributions can also provide powerful context for event characterization in the absence of comprehensive annotation. This work develops a way to leverage distributional information across a set of sensors in the absence of comprehensive annotation as a domain‐informed regularization term applied during gradient‐based learning. The regularization term is the basis of event‐based training which I show can be a powerful semi‐supervised learning (SSL) approach. I first use a simple feed forward neural network and a toy data set to outline how data set structure interacts with the assumptions inherent to many semi‐supervised learning approaches. I then demonstrate the effectiveness of event‐based training using a deep convolutional neural network for seismic event classification in Utah, which increases SSL accuracy from 92% to 97% on event classification with a limited number of training labels.

Linville, Lisa M.↗

Mass Redistribution Causes the Structural Richness of Ion-Irradiated Surfaces

We show that the 'sputter patterning' topographical instability is determined by the effects of ion impact-induced prompt atomic redistribution and that erosion - the consensus predominant cause - is essentially irrelevant. We use grazing incidence small angle x-ray scattering to measure in situ the damping of noise or its amplification into patterns via the linear dispersion relation. A model based on the effects of impact-induced redistribution of those atoms that are not sputtered away explains both the observed ultrasmoothening at low angles from normal incidence and the instability at higher angles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An effective-medium model for P-wave velocities of saturated, unconsolidated saline permafrost

To better understand the relationship between P-wave velocities and ice content in saturated, unconsolidated saline permafrost, we constructed an effective-medium model based upon ultrasonic P-wave data that were obtained from earlier laboratory studies. The model uses a two-end-member mixing approach in which an ice-filled, fully frozen end member and a water-filled, fully unfrozen end member are mixed together to form the effective medium of partially frozen sediments. This mixing approach has two key advantages: (1) It does not require parameter tuning of the mixing ratios, and (2) it inherently assumes mixed pore-scale distributions of ice that consist of frame-strengthening (i.e., cementing and/or loadbearing) ice and pore-filling ice. The model-predicted P-wave velocities agree well with our laboratory data, demonstrating the effectiveness of the model for quantitatively inferring ice content from P-wave velocities. The modeling workflow is simple and is largely free of calibration parameters -attributes that ease its application in interpreting field data sets.

54 ENVIRONMENTAL SCIENCES↗

The effect of dark matter and dark energy interactions on the peculiar velocity field and the kinetic Sunyaev-Zel'dovich effect

The interaction between Dark Matter and Dark Energy has been proposed as a mechanism to alleviate the coincidence problem. We analyze its effects on the evolution of the gravitational and the peculiar velocity fields. We find that for different model parameters peculiar velocities vary from a factor five times smaller to two times larger than in the ΛCDM cosmological model at the same scales. We propose two new observables sensitive to such interactions based on their effect on the velocity field. We compare the effects on peculiar velocities with those on the Integrated Sachs-Wolfe effect demonstrating that velocities are more sensitive to the interaction. We show that the current upper limits on the amplitude of the kinetic Sunyaev-Zel'dovich power spectrum of temperature anisotropies provide constraints on the coupling within the dark sectors that are consistent with those obtained previously from the Cosmic Microwave Background and galaxy clusters. In particular, we show that Atacama Cosmology Telescope and South Pole Telescope data favor the decay of Dark Energy into Dark Matter, as required to solve the coincidence problem.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental fire increases soil carbon dioxide efflux in a grassland long‐term multifactor global change experiment

Abstract Numerous studies have demonstrated that soil respiration rates increase under experimental warming, although the long‐term, multiyear dynamics of this feedback are not well constrained. Less is known about the effects of single, punctuated events in combination with other longer‐duration anthropogenic influences on the dynamics of soil carbon (C) loss. In 2012 and 2013, we assessed the effects of decadal‐scale anthropogenic global change – warming, increased nitrogen (N) deposition, elevated carbon dioxide ( CO 2 ), and increased precipitation – on soil respiration rates in an annual‐dominated Mediterranean grassland. We also investigated how controlled fire and an artificial wet‐up event, in combination with exposure to the longer‐duration anthropogenic global change factors, influenced the dynamics of C cycling in this system. Decade‐duration surface soil warming (1–2 °C) had no effect on soil respiration rates, while +N addition and elevated CO 2 concentrations increased growing‐season soil CO 2 efflux rates by increasing annual aboveground net primary production ( NPP ) and belowground fine root production, respectively. Low‐intensity experimental fire significantly elevated soil CO 2 efflux rates in the next growing season. Based on mixed‐effects modeling and structural equation modeling, low‐intensity fire increased growing‐season soil respiration rates through a combination of three mechanisms: large increases in soil temperature (3–5 °C), significant increases in fine root production, and elevated aboveground NPP . Our study shows that in ecosystems where soil respiration has acclimated to moderate warming, further increases in soil temperature can stimulate greater soil CO 2 efflux. We also demonstrate that punctuated short‐duration events such as fire can influence soil C dynamics with implications for both the parameterization of earth system models ( ESM s) and the implementation of climate change mitigation policies that involve land‐sector C accounting.

Strong, Aaron L.↗

Ferroelectric FET-based context-switching FPGA enabling dynamic reconfiguration for adaptive deep learning machines

Field programmable gate array (FPGA) is widely used in the acceleration of deep learning applications because of its reconfigurability, flexibility, and fast time-to-market. However, conventional FPGA suffers from the trade-off between chip area and reconfiguration latency, making efficient FPGA accelerations that require switching between multiple configurations still elusive. Here, we propose a ferroelectric field-effect transistor (FeFET)–based context-switching FPGA supporting dynamic reconfiguration to break this trade-off, enabling loading of arbitrary configuration without interrupting the active configuration execution. Leveraging the intrinsic structure and nonvolatility of FeFETs, compact FPGA primitives are proposed and experimentally verified. The evaluation results show our design shows a 63.0%/74.7% reduction in a look-up table (LUT)/connection block (CB) area and 82.7%/53.6% reduction in CB/switch box power consumption with a minimal penalty in the critical path delay (9.6%). Besides, our design yields significant time savings by 78.7 and 20.3% on average for context-switching and dynamic reconfiguration applications, respectively.

97 MATHEMATICS AND COMPUTING↗

Toward Engineering of Solution Microenvironments for the CO 2 Reduction Reaction: Unraveling pH and Voltage Effects from a Combined Density-Functional–Continuum Theory

Engineering the electrolyte microenvironment represents an attractive route to tuning the selectivity of electrocatalytic reactions beyond catalyst composition and morphology. However, harnessing the full potential of this approach requires understanding the interplay between voltage, electrolyte composition, and adsorbate binding within the electrical double layer, which is absent from the usual theoretical approaches. In this study, we apply a recently developed density functional theory (DFT)–continuum approach based on the effective screening medium method and reference interaction site model (ESM–RISM) to explore electrolyte effects with an enhanced description of the electrochemical interface. Furthermore, applying this method to the binding of CO adsorbates in potassium-containing electrolytes on copper, a problem of direct relevance to CO 2 electroreduction to value-added products, we show that the interdependence of voltage and pH leads to an unexpected change in adsorption site preference on Cu(001) terraces. Our findings highlight the often-overlooked importance of the electrical double-layer structure for predicting catalyst operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of CdS Nanoparticles by Hydrothermal Method and Their Effects on the Electrical Properties of Bi-based Superconductors

Cadmium sulfide (CdS) nanoparticles were synthesized by hydrothermal process and have been characterized by x-ray diffraction (XRD), transmission electron microscopy (TEM), and energy-dispersive x-ray spectroscopy (EDXS) system. The effect of added CdS nanoparticles on the superconducting properties and flux pinning capability in (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub y} system (denoted as (Bi,Pb)-2223) has been reported. Hydrothermal method is an effective route to synthesize CdS nanoparticles with good crystallinity and having average grain size of about 12 nm. Then, small amounts (0–0.4 wt%) of nanosized CdS particles were added to Bi-2233 samples using a solid-state reaction route. The transport critical current densities and the electrical resistivity ρ(T, H) were performed using the four-probe technique. The results show that samples sintered by small amount of CdS nanoparticles (≤ 0.3 wt%) exhibit the higher critical current densities and energy pinning in applied magnetic fields compared to free added sample. Consequently, the addition of CdS could introduce effective pinning centers which account for the improvement in superconducting properties in the Bi-2223 materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗