Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transportation System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Integration of Decentralized Graph-Based Multi-Agent Reinforcement Learning with Digital Twin for Traffic Signal Optimization

Machine learning (ML) methods, particularly Reinforcement Learning (RL), have gained widespread attention for optimizing traffic signal control in intelligent transportation systems. However, existing ML approaches often exhibit limitations in scalability and adaptability, particularly within large traffic networks. This paper introduces an innovative solution by integrating decentralized graph-based multi-agent reinforcement learning (DGMARL) with a Digital Twin to enhance traffic signal optimization, targeting the reduction of traffic congestion and network-wide fuel consumption associated with vehicle stops and stop delays. In this approach, DGMARL agents are employed to learn traffic state patterns and make informed decisions regarding traffic signal control. The integration with a Digital Twin module further facilitates this process by simulating and replicating the real-time asymmetric traffic behaviors of a complex traffic network. The evaluation of this proposed methodology utilized PTV-Vissim, a traffic simulation software, which also serves as the simulation engine for the Digital Twin. The study focused on the Martin Luther King (MLK) Smart Corridor in Chattanooga, Tennessee, USA, by considering symmetric and asymmetric road layouts and traffic conditions. Comparative analysis against an actuated signal control baseline approach revealed significant improvements. Experiment results demonstrate a remarkable 55.38% reduction in Eco_PI, a developed performance measure capturing the cumulative impact of stops and penalized stop delays on fuel consumption, over a 24 h scenario. In a PM-peak-hour scenario, the average reduction in Eco_PI reached 38.94%, indicating the substantial improvement achieved in optimizing traffic flow and reducing fuel consumption during high-demand periods. These findings underscore the effectiveness of the integrated DGMARL and Digital Twin approach in optimizing traffic signals, contributing to a more sustainable and efficient traffic management system.

actuated signal control↗

Siting considerations for a deep borehole disposal facility - 15403

This paper describes considerations for siting and designing a facility for deep borehole disposal of spent nuclear fuel (SNF) and/or high-level radioactive waste (HLW). Technical considerations include geological, hydrogeochemical, and geophysical characteristics that are related to the suitability of the site for deep drilling and borehole construction, waste emplacement activities, waste isolation (seals and surrounding geology), and long-term safety of the deep borehole disposal system. Logistical factors to be considered include: local or regional availability of drilling contractors (equipment, services, and materials) capable of drilling a large-diameter hole to approximately 5,000 m depth; construction of surface facilities and waste handling and emplacement equipment; legal and regulatory requirements associated with drilling, operation, and post-closure; and access to transportation systems. Social and political considerations include the distance from population centers and the support or opposition of local and state entities and other stakeholders to the facility and its operations. These technical, logistical, and socio-political factors are examined in the context of a consent-based siting process for a deep disposal borehole, which would be the first phase in developing an operating facility. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Wireless charging and shared autonomous battery electric vehicles (W+SABEV): synergies that accelerate sustainable mobility and greenhouse gas emission reduction

Emerging technologies play important roles in shaping future mobility systems and impacting sustainability performance of the transportation sector in major economies, such as the United States of America (USA) and China. This study applies a life cycle framework to demonstrate and evaluate the synergies of the following four emerging transportation system technologies both qualitatively and quantitatively: (1) wireless charging; (2) shared mobility services; (3) autonomous driving; and (4) battery electric vehicles (BEV). The new concept of a wireless charging and shared autonomous battery electric vehicle (W+SABEV) system is introduced and modeled. First, an analytical framework is presented to assess the pros and cons of the W+SABEV system vs. a conventional plug-in charging BEV system, adhering to the principles of sustainable mobility and highlighting the impacts and dynamics of the disruptive technologies on the key parameters that define sustainable mobility. Second, a quantitative analysis presents the synergies of the four technologies by modeling a W+SABEV system and demonstrates that the combination of the four technologies can shorten the payback time of greenhouse gas (GHG) emission burdens for infrastructure and vehicles. Finally, compared to a plug-in charging BEV system, a W+SABEV system pays back the additional GHG emission burdens of wireless charging infrastructure deployment within 5 years if the wireless charging utility factor (ratio of en route charging time vs. trip time) is above 19%.

33 ADVANCED PROPULSION SYSTEMS↗

LIGHT DUTY VEHICLE CHOICE MODELS EXAMINING ALTERNATIVE FUEL TECHNOLOGY PREFERENCES AMONG COMMERCIAL FLEET OWNERS

Agent-based transportation models are critical tool for evaluating energy use, emissions and mobility impacts of transportation. In this context, vehicle ownership models are critical for linking agent activities to their impacts on the transportation system. However, no agent-based freight transportation models to date has been developed that predicts the fuel technology that is preferred by establishments when purchasing a Light Duty Vehicle (LDV) for business purposes. This research addresses this gap by using recently collected survey data to estimate a discrete choice model that can be applied in the agent-based context.

commercial↗

Spatiotemporal Automatic Calibration of Infrastructure Lidar, Radar, and Camera with a Global Navigation Satellite System

Robust and accurate perception is important for modern intelligent transportation systems (ITS), which use sensors of various modalities for data fusion to create a digital twin of an intersection. Sensor calibration is an important process that creates a unified coordinate frame for the sensor output data so that it can be used for data fusion. Classical approaches for sensor calibration are time-consuming, require an overlapping field of view for feature matching, and are not feasible for ITS application as they cause disruptions in the flow of traffic. In this paper, we present a spatiotemporal automatic calibration approach to calibrate multiple infrastructure lidar, radar, and cameras installed at a traffic intersection. The approach uses global navigation satellite system (GNSS) positioning information shared by connected vehicles, and when the vehicle is detected by the sensor, we match the sensor detections with the GNSS coordinates. The proposed algorithm is evaluated with a real-world dataset utilizing detections from two radars, cameras, and lidars with a test vehicle instrumented with a post-processing kinematic (PPK)-corrected GNSS driving past the sensors installed at a four-way traffic intersection. The experimental results show that the proposed automatic calibration approach can achieve the transformation with a root mean squared error of less than 0.5 for radar and lidar and less than 2 for camera detections. The ability to rapidly calibrate sensors not only benefits initial installations, but can also be used for system health monitoring, while utilizing available connected vehicle data to test the real-time sensor fidelity and operational status.

ADVANCED PROPULSION SYSTEMS,ENERGY CONSERVATION, C↗

A Methodology for the Integration of a Mechanistic Source Term Analysis in a Probabilistic Framework for Advanced Reactors

GE Hitachi Nuclear Energy (GEH) and Argonne National Laboratory are currently engaged in a joint effort to modernize and develop probabilistic risk assessment (PRA) techniques for advanced non-light water reactors. At a high level, the primary outcome of this project will be the development of next-generation PRA methodologies that will enable risk-informed prioritization of safety- and reliability-focused research and development, while also identifying gaps that may be resolved through additional research. A subset of this effort is the development of PRA methodologies to conduct a mechanistic source term (MST) analysis for event sequences that could result in the release of radionuclides. The MST analysis seeks to realistically model and assess the transport, retention, and release of radionuclides from the reactor to the environment. The MST methods developed during this project seek to satisfy the requirements of the Mechanistic Source Term element of the ASME/ANS Non-LWR PRA standard. The MST methodology consists of separate analysis approaches for risk-significant and non-risk significant event sequences that may result in the release of radionuclides from the reactor. For risk-significant event sequences, the methodology focuses on a detailed assessment, using mechanistic models, of radionuclide release from the fuel, transport through and release from the primary system, transport in the containment, and finally release to the environment. The analysis approach for non-risk significant event sequences examines the possibility of large radionuclide releases due to events such as re-criticality or the complete loss of radionuclide barriers. This paper provides details on the MST methodology, including the interface between the MST analysis and other elements of the PRA, and provides a simplified example MST calculation for a sodium fast reactor.

Grabaskas, Dave↗

Proposed Methodology for a Tour-Based Freight Model

This study is part of the US Department of Energy’s Systems and Modeling for Accelerated Research in Transportation (SMART) Mobility initiative. It is included in the Multi-Modal pillar of SMART Mobility and is titled: Optimization of Intra-City Freight Movement and New Delivery Methods. The primary purpose of this study is to analyze the energy reduction opportunities provided by new freight modes and technologies. This will be done by developing a tour-based freight model for Columbus, Ohio. This model will be used to analyze the energy and emission savings of alternative technologies including drones, central delivery lockers, and the use of electric vehicles for last-mile freight deliveries. The tour-based model will also be used to examine the growth and distribution of freight traffic and its impacts on the local transportation system. Development of this model will be coordinated with the Mid-Ohio Regional Planning Commission (MORPC), the Metropolitan Planning Organization (MPO) for the Columbus, Ohio area.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Support system considerations for STS biological investigations

Equipment required for Space Transportation System biological experiments is considered, and environmental factors and operational constraints affecting the performance of experiments are examined. Specimen housing is discussed, problems associated with telemetry procedures are characterized, and attention is directed to the problems of handling hazardous fixatives, radioisotopes, and chemicals.

Bowman, G. H.↗

EPS analysis of nominal STS-1 flight

The results of electrical power system (EPS) analysis of the planned Shuttle Transportation System Flight 1 mission are presented. The capability of the orbiter EPS to support the planned flight and to provide program tape information and supplementary data specifically requested by the flight operations directorate was assessed. The analysis was accomplished using the orbiter version of the spacecraft electrical power simulator program, operating from a modified version of orbiter electrical equipment utilization baseline revision four. The results indicate that the nominal flight, as analyzed, is within the capabilities of the orbiter power generation system, but that a brief, and minimal, current overload may exist between main distributor 1 and mid power controlled 1, and that inverter 9 may the overloaded for extended periods of time. A comparison of results with launch commit criteria also indicated that some of the presently existing launch redlines may be violated during the terminal countdown.

Wolfgram, D. F.↗

Orbit IMU alignment: Error analysis

A comprehensive accuracy analysis of orbit inertial measurement unit (IMU) alignments using the shuttle star trackers was completed and the results are presented. Monte Carlo techniques were used in a computer simulation of the IMU alignment hardware and software systems to: (1) determine the expected Space Transportation System 1 Flight (STS-1) manual mode IMU alignment accuracy; (2) investigate the accuracy of alignments in later shuttle flights when the automatic mode of star acquisition may be used; and (3) verify that an analytical model previously used for estimating the alignment error is a valid model. The analysis results do not differ significantly from expectations. The standard deviation in the IMU alignment error for STS-1 alignments was determined to the 68 arc seconds per axis. This corresponds to a 99.7% probability that the magnitude of the total alignment error is less than 258 arc seconds.

Corson, R. W.↗

Rolling Beam Umbilical System

The decision to make the Centaur Vehicle a Space Transportation System (STS) payload meant that new ground support equipment provisions at Launch Pads Pads 39A and 39B were required. These new equipment provisions were needed to service the Centaur vehicle while it was installed in the Orbiter's payload bay prior to launch. This paper describes the design of a new rolling beam umbilical syste (RBUS) being added to the pad fixed service structure (FSS) in order to provide the primary functions of liquid hydrogen (LH2) fill, drain, and vent. The carrier plate itself is a Government-furnished equipment item and of necessity became a T-O disconnect. This permits quick offloading in the event of an abort prior to lift-off. In addition to the rolling beam structure, mechanisms, and fluid lines, it was necessary to design and build a carrier plate simulator to support early development testing of the mast at the Launch Equipment Test Facility at Kennedy Space Center. The RBUS is designed to be compatible with the rotating service structure (RSS) to the extent that the umbilical may be deployed with the RSS mated with the vehicle. It is also designed to clear the RSS as the RSS rotates back out of the way. Accessibility to the Orbiter aft compartment via the 50-1 door had to be maintained.

Tatem, B. C., Jr.↗

An assessment of the Space Shuttle Orbiter thermal environment using flight data

A unified analysis of the Shuttle Orbiter aerothermodynamic environment and thermal protection system performance is presented using the Space Transportation System development flight data. Comparisons of predicted and measured temperatures and heating rates along the Orbiter lower windward fuselage centerline and lower wing 50 percent and 80 percent semi-spans are discussed. The results of this study indicate lower than predicted heating on windward fuselage surface but higher heating on the nose cap and 50 percent semi-span wing panels.

Williams, S. D.↗

A pumped two-phase cooling system for spacecraft

A pumped, two-phase heat-transport system is being developed for possible use for temperature control of scientific instruments on future NASA missions. As compared to a single-phase system, this two-phase system can maintain tighter temperature control with less pumping power. A laboratory model of the system has been built and tested. The measured heat transfer coefficients were approximately the same as in heat pipes, 220 Btu/hr-sq ft-F, as compared to 25 Btu/hr-sq ft-F for single-phase liquid flow. Heat shearing between experiments has been demonstrated wherein vapor generated in the cold plate of an active experiment was condensed in a cold, unheated experiment. System stability has been observed. However, additional development is needed. The use of non-azeotropic mixtures of coolants appears especially promising as a simple way to determine exit quality and thus control the flow rates to prevent dryout.

Ollendorf, S.↗

Support systems design and analysis

The integration of Kennedy Space Center (KSC) ground support systems with the new launch processing system and new launch vehicle provided KSC with a unique challenge in system design and analysis for the Space Transportation System. Approximately 70 support systems are controlled and monitored by the launch processing system. Typical systems are main propulsion oxygen and hydrogen loading systems, environmental control life support system, hydraulics, etc. An End-to-End concept of documentation and analysis was chosen and applied to these systems. Unique problems were resolved in the areas of software analysis, safing under emergency conditions, sampling rates, and control loop analysis. New methods of performing End-to-End reliability analyses were implemented. The systems design approach selected and the resolution of major problem areas are discussed.

Ferguson, R. M.↗

Hoop/column antenna deployment mechanism overview

The hoop/column antenna program is directed toward the development of a cost effective, large area, self deploying reflector antenna system. Large surface area antenna systems are required in future space missions involving improved land communications, Earth resources observation, and the study of intergalactic energy sources. The hoop/column antenna is a concept where a large antenna system can be packaged within the Space Transportation System (Shuttle) payload bay, launched into Earth orbit where it is released either for deployment as an Earth observation or communications antenna, or boosted into deep space as an intergalactic energy probe. Various mechanisms and support structures are described that are required to deploy the hoop, which is used to support the antenna reflective surface, and the column that is used to position the antenna feeds and the reflector. It also describes a proof-of-concept model (15 meters in diameter) that is currently being ground tested to determine the adequacy of the deployment mechanisms.

Allen, B. B.↗

Applicability of 100kWe-class of space reactor power systems to NASA manned space station missions

An assessment is made of a manned space station operating with sufficiently high power demands to require a multihundred kilowatt range electrical power system. The nuclear reactor is a competitor for supplying this power level. Load levels were selected at 150kWe and 300kWe. Interactions among the reactor electrical power system, the manned space station, the space transportation system, and the mission were evaluated. The reactor shield and the conversion equipment were assumed to be in different positions with respect to the station; on board, tethered, and on a free flyer platform. Mission analyses showed that the free flyer concept resulted in unacceptable costs and technical problems. The tethered reactor providing power to an electrolyzer for regenerative fuel cells on the space station, results in a minimum weight shield and can be designed to release the reactor power section so that it moves to a high altitude orbit where the decay period is at least 300 years. Placing the reactor on the station, on a structural boom is an attractive design, but heavier than the long tethered reactor design because of the shield weight for manned activity near the reactor.

Silverman, S. W.↗