Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transport phenomena”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Extraterrestrial Mining Via Two Coupled Thermal-Driven Phenomena

Two-coupled thermal-driven phenomena, Marangoni effect and thermal fractional decomposition under high vacuum, previously observed by the authors could lead to an extraterrestrial mining operation that would significantly reduce mechanical operation and allow in-situ product extraction directly from the mineral without the necessity of neither mineral beneficiation nor use of terrestrial precursors. Thermal Marangoni effect alone and coupled with fractional decomposition have been corroborated through paths of 10 and 13 inches respectively on molten JSC-1A lunar regolith simulant presenting a novel and valuable potential for extraterrestrial mining as the observed outcome (self-transportation via Marangoni effect and fractional decomposition at higher temperature) will be more prominent on extraterrestrial surfaces under higher vacuum and reduced gravity. A comprehensive 3D model built by the authors demonstrated to be a crucial tool to determine the right location of the sample to optimize the gradient temperature along the wall of a long tubular crucible enhancing the Marangoni effect as surface tension (the driving force for the thermal Marangoni effect) depends on the temperature gradient.

Jesus A Dominguez↗
DOE OSTI2022

Phonons and phase symmetries in bulk CrCl 3 from scattering measurements and theory

Phonon-derived behaviors are important indicators of novel phenomena in transition metal trihalides, including spin liquid behavior, two-dimensional magnetism, and spin-lattice coupling. However, phonons and their dependence on spin structure and excitations have not been adequately explored. In this work, we probe and critically examine the vibrational properties of the prototype ferromagnetic honeycomb lattice material CrCl 3 using inelastic neutron scattering and density functional theory. We demonstrate that magnetic and van der Waals interactions are essential to describing the structure and phonons in CrCl 3 ; however, the specific spin configuration is unimportant. Further, this provides context for understanding thermal transport measurements as governed by dynamical spin-lattice couplings. More importantly, we introduce an efficient dynamic method that exploits translational symmetries in large conventional unit cells that generates insights into phonon dispersions, interactions, and measured spectra in terms of quantum phase interference conditions. This work opens new avenues for understanding phonons in layered magnets and more generally in conventional cell geometries of a variety of materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Interfacial and Confinement-Mediated Organization of Gas Hydrates, Water, Organic Fluids, and Nanoparticles for the Utilization of Subsurface Energy and Geological Resources

Harnessing the subsurface geologic environments in an efficient and environmentally sustainable manner is challenged by uncertainties associated with predicting the fate of fluids and sustaining porosity and permeability in subsurface geologic environments. Some of these uncertainties arise from confined and interfacially induced structures of fluids in subsurface geologic environments. The formation of gas hydrates, phase transitions of confined fluids, assembly and deposition of heavy hydrocarbons, and the agglomeration and fate of nanoparticles in confined environments are summarized in this review. Nanoscale confinement contributes to anisotropic structures and dynamics of fluids, which is the basis for anomalous phase transition thermodynamics, reactivity, transport, and geomechanical behavior. In this review, we discuss the structures of confined fluids and deviation in observed properties from bulk fluids. The factors influencing the structures of confined fluids can be generally divided into two groups: (a) pore characteristics including pore size, pore surface chemistry, and pore geometry and (b) confined fluid/solid characteristics such as molecular structure, concentrations, charges, pore filling, and presence of additives. Scientific advancements and knowledge gaps in our understanding of the structures of confined fluids and the associated differences in observed properties compared to bulk fluids are discussed. Here, the phenomena discussed in this review are of particular relevance to our efforts in harnessing the subsurface environments for a low carbon future by increasing the utilization of geothermal energy, using CO 2 as a working fluid, and storing CO 2 in subsurface geologic environments.

42 ENGINEERING↗
DOE OSTI2023

Oxygen priming induced by elevated CO 2 reduces carbon accumulation and methane emissions in coastal wetlands

Warming temperatures and elevated carbon dioxide (CO 2 ) are inextricably linked global change phenomena, but are rarely manipulated together in field experiments. As a result, ecosystem-level responses to these interacting facets of global change remain poorly understood. In 2017, we started an experiment in a coastal wetland that crosses warming and elevated CO 2 , to better understand how the interactions of these factors affect the plants, biogeochemistry, and overall survival of these ecosystems. However, contrary to our expectations, when elevated CO 2 is combined with warming, the wetland accumulated less carbon, making it more vulnerable to sea-level rise. This was due to the plants transporting more oxygen into the soil, which stimulated aerobic decomposition. At the same time, the increased supply of oxygen reduced net methane (CH 4 ) emissions from the system, even though warming alone substantially increased CH 4 emission. Together, these results demonstrate that ecosystem responses to interacting facets of global change may be mediated by plant traits that regulate the soil environment. Thus, plant responses are critical for predicting future ecosystem survival and climate feedbacks.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Advanced manufacturing for electrosynthesis of fuels and chemicals from CO 2

Advanced manufacturing (AM) represents an appealing approach for creating novel electrochemical systems for chemicals synthesis. In this work, we demonstrate AM for rapid development and testing for improved performance for the carbon dioxide reduction reaction across an evolution of vapor-fed reactor designs. In our final design, we observe activation- and mixed-control regimes for a variety of operating conditions via inlet CO 2 flow rate and electrochemical potential. Furthermore, we define a dimensionless number (Da) to identify mass transport regimes by exploring the impact of hypothesized underlying mass transport mechanisms, including consumption of CO 2 via OH - , increased local temperatures, and partial penetration of electrolyte into gas diffusion layer. The accelerated pace of reactor design and development led to high geometric current densities (500 mA cm -2 ), heightened selectivity (85.5% FE C 2+ products), and increased carbon dioxide conversion (16.6%) and cathodic energy efficiency (49.6% CO 2 R). Using AM vapor-fed reactors, we attain high ethylene (3.67%) and record ethanol (3.66%) yields compared to the literature. Finally, this work underscores the promise of AM for accelerating reactor design, understanding of governing phenomena, and improving the performance of catalytic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Adsorption-controlled growth of MnTe(Bi2Te3)n by molecular beam epitaxy exhibiting stoichiometry-controlled magnetism

We report the growth of the intrinsic magnetic topological system MnTe ( Bi 2 Te 3 ) n by molecular beam epitaxy. By mapping the temperature and the Bi:Mn flux ratio, it is shown that there is a narrow growth window for the n = 1 phase Mn Bi 2 Te 4 with 2.0 < Bi : Mn < 2.6 at 225°C. In this work, the films are stoichiometric and excess Bi and Te is not incorporated. At higher flux ratios (Bi:Mn≥4.5) it is found that the n = 2 Mn Bi 4 Te 7 phase is stabilized. Transport measurements indicate that the Mn Bi 2 Te 4 and Mn Bi 4 Te 7 undergo magnetic transitions around 25 and 10 K, respectively, consistent with antiferromagnetic phases found in the bulk. Further, for Mn-rich conditions (Bi:Mn<2), ferromagnetism emerges that exhibits a clear hysteretic state in the Hall effect, which likely indicates Mn-doped Mn Bi 2 Te 4 . Understanding how to grow ternary chalcogenide phases is the key to synthesizing new materials and to interface magnetism and topology, which together are routes to realize and control exotic quantum phenomena.

36 MATERIALS SCIENCE↗
NASA NTRS2012

Human Settlements in the South-Central U.S., Viewed at Night from the International Space Station

A recent innovation of astronauts observing Earth from the International Space Station (ISS) is documenting human footprints by photographing city lights at night time. One of the earliest night-time images from the ISS was the US-Mexico border at El Paso-Ciudad Juarez. The colors, patterns and density of city lights document the differences in the cultural settlement patterns across the border region, as well as within the urban areas themselves. City lights help outline the most populated areas in settlements around the world, and can be used to explore relative population densities, changing patterns of urban/suburban development, transportation networks, spatial relationship to geographic features, and more. The data also provides insight into parameters such as surface roughness for input into local and regional climate modeling and studies of light pollution. The ground resolution of night-time astronaut photography from the ISS is typically an order of magnitude greater than current Defense Meteorological Satellite Program (DMSP) data, and therefore can serve as a "zoom lens" for selected urban areas. Current handheld digital cameras in use on the ISS, optimized for greater light sensitivity, provide opportunities to obtain new detailed imagery of atmospheric phenomena such as airglow, aurora, and noctilucent clouds in addition to documenting urban patterns. ISS astronauts have taken advantage of increasingly sensitive digital cameras to document the world at night in unprecedented detail. In addition, the capability to obtain time-lapse imagery from fixed cameras has been exploited to produce dynamic videos of both changing surface patterns around the world and atmospheric phenomena. We will profile some spectacular images of human settlements over the South-Central U.S., and contrast with other images from around the world. More data can be viewed at http://eol.jsc.nasa.gov/Videos/CrewEarthObservationsVideos/. US-Mexico border is obvious by the different lighting pattern. Not surprisingly, the densely illuminated city of Juarez indicates a higher population; El Paso's smaller population is spread out over a larger area.

Dawson, Melissa↗
DOE OSTI2025

The influence of V-defects, leakage, and random alloy fluctuations on the carrier transport in red InGaN MQW LEDs

Red InGaN-based light-emitting diodes (LEDs) exhibit lower internal quantum efficiencies than violet, blue, and green InGaN LEDs due to a reduction in radiative recombination rates relative to non-radiative recombination rates as the Indium composition increases. Additionally, the larger polarization and band offset barriers between high indium content InGaN quantum wells and GaN quantum barriers increase the forward voltage. In blue and green LEDs, random alloy fluctuations and V-defects play a key role in reducing the forward voltage. When V-defects are present, either naturally or intentionally introduced, they create an alternative path for carrier injection into the MQWs through the V-defect sidewalls. This injection mechanism explains the turn-on voltages of green LEDs. However, in InGaN red LEDs, these two phenomena do not reduce the forward voltage as effectively as in blue and green LEDs, and consequently, the computed forward voltage remains significantly higher than the measured one. Furthermore, currents are observed at low voltages before the turn-on voltage (V<ℏω/e=2.0 V) of red LEDs. To address this, we introduce dislocation-induced tail states in the modeling, suggesting that leakage current through these states may play a significant role both below and at turn-on voltages. The simulation also indicates that leakage carriers below turn-on accumulate, partially diffuse in the QWs, screen the polarization-induced barrier in the low injection regime, and further reduce the forward voltage. Despite these beneficial effects, a drawback of dislocation-induced tail states is the enhanced nonradiative recombination in the dislocation line region. This study provides a detailed analysis of device injection physics in InGaN QW red LEDs and outlines potential optimization strategies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Spatially resolved performance and degradation in a perfluorinated anion exchange membrane fuel cell

Anion exchange membrane fuel cells may enable future operation with non-precious metal-based catalysts. These systems have a delicate sensitivity to operating conditions such as humidification levels and the presence of CO2 in the air oxidant stream. We present spatially resolved in-situ performance results that shed light on phenomena that are unique to anion exchange membrane fuel cells. For cell construction, a highly conductive perfluorinated anion exchange polymer was used as the membrane and the material in powder form as the ionomer. Experiments were conducted to investigate the effects of humidification, fuel/oxidant concentration, and carbonation effects on the performance and its distribution in the cell. The results indicated that (i) dry conditions at the cathode have a stronger effect than at the anode on overall cell performance, (ii) performance significantly suffered when humidification was below 90%, (iii) fuel and oxidant dilution effects lead mass-transport losses and were stronger than flow rate effects, (iv) CO2 in the cathode feed stream creates an equilibration disparity between the inlet and outlet sections and CO2 purging is affected by flooding conditions, and (v) after >500 h of operation, performance deteriorates predominantly at the inlet.

2+1D fuel cell model↗
DOE OSTI2023

Granular Flow in Novel Octet Shape–Based Lattice Frame Material

Moving packed-bed heat exchangers in concentrated solar power (CSP) plants involves heat transfer between heated falling particles and supercritical carbon dioxide. The overall effective thermal conductivity of the moving packed bed and particle-side channel contact resistances are still the bottlenecks in achieving the desirable thermal transport levels. To this end, a novel moving packed bed heat exchanger consisting of an Octet lattice packed between the walls of the particle-side channel is proposed in this study. Granular flow analysis in Octet lattice moving packed bed heat exchanger (OLHX) was conducted through experiments and discrete element method (DEM)-based numerical simulations. The experimental images clearly demonstrated stagnation regions upstream of lattice fibers, void regions downstream of the fiber junctions, and wavy-type unobstructed flow on the lateral sides of the fibers. DEM simulations were successful in capturing all these critical flow phenomena. Larger flow velocities were observed on the lateral sides of the fibers in the simulations. Also, when the particles in the silo were emptied, the final images showed an accumulation of particles on the inter-fiber as well as fiber–channel wall junctions. Moreover, the fiber connections resulted in some regions devoid of particle contact on the channel endwall, which means that these regions would suffer from poor thermal exchange. Finally, the overall mass flowrate increased with increasing porosity for a fixed particle diameter.

14 SOLAR ENERGY↗
DOE OSTI2022

The ParFlow Sandtank: An interactive educational tool making invisible groundwater visible

Physical aquifer models are a highly effective teaching tool for hydrology education, however they come with inherent limitations that include the high cost to purchase, the static configuration of the model materials, the time required to visualize hydrogeological phenomena, and the effort to reset and clean them over time. To address these and other limitations, we have developed an interactive computer simulation of a physical aquifer model called the ParFlow Sandtank. In this gamified interface, users run the simulation using a familiar web-app like interface with sliders and buttons while learning real hydrologic concepts. Our user interface allows participants to dive into the world of hydrology, understanding assumptions about model parameters such as hydraulic conductivity, making decisions about inputs to groundwater aquifer systems such as pumping rates, visualizing outputs such as stream flow, transport, and saturation, and exploring various factors that impact real environmental systems such as climate change. The ParFlow Sandtank has already been used in a variety of educational settings with more than 9,000 users per year, and we feel this emerging educational tool can be used broadly in educational environments and can be scaled-up to provide greater accessibility for students and educators. Here we present the capabilities and workflow of the ParFlow Sandtank, two use cases, and additional tools and custom templates that have been developed to support and enhance the reach of the ParFlow Sandtank.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1992

A new unsteady mixing model to predict NO(x) production during rapid mixing in a dual-stage combustor

An advanced gas turbine engine to power supersonic transport aircraft is currently under study. In addition to high combustion efficiency requirements, environmental concerns have placed stringent restrictions on the pollutant emissions from these engines. A combustor design with the potential for minimizing pollutants such as NO(x) emissions is undergoing experimental evaluation. A major technical issue in the design of this combustor is how to rapidly mix the hot, fuel-rich primary zone product with the secondary diluent air to obtain a fuel-lean mixture for combustion in the second stage. Numerical predictions using steady-state methods cannot account for the unsteady phenomena in the mixing region. Therefore, to evaluate the effect of unsteady mixing and combustion processes, a novel unsteady mixing model is demonstrated here. This model has been used to study multispecies mixing as well as propane-air and hydrogen-air jet nonpremixed flames, and has been used to predict NO(x) production in the mixing region. Comparison with available experimental data show good agreement, thereby providing validation of the mixing model. With this demonstration, this mixing model is ready to be implemented in conjunction with steady-state prediction methods and provide an improved engineering design analysis tool.

Menon, Suresh↗
DOE OSTI2022

Rare-earth monopnictides: Family of antiferromagnets hosting magnetic Fermi arcs

We report since the discovery of topological insulators a great deal of research effort has been devoted to magnetic topological materials, in which nontrivial spin properties can be controlled by magnetic fields, culminating in a wealth of fundamental phenomena and possible applications. The main focus was on ferromagnetic materials that can host Weyl fermions and therefore spin-textured Fermi arcs. The recent discovery of Fermi arcs and new magnetic band splitting in the antiferromagnet (AFM) NdBi has opened up new avenues for exploration. Here we show that these uncharted effects are not restricted to this specific compound, but also emerge in CeBi and NdSb when they undergo paramagnetic to AFM transition. Our data show that the Fermi arcs in NdSb have twofold symmetry, leading to strong anisotropy that may enhance effects of spin textures on transport properties. Our findings thus demonstrate that the RBi and RSb series are materials that host magnetic Fermi arcs and may be a potential platform for modern spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1991

Determination of crustal motions using satellite laser ranging

Satellite laser ranging has matured over the last decade into one of the essential space geodesy techniques. It has demonstrated centimeter site positioning and millimeter per year velocity determinations in a frame tied dynamically to the mass center of the solid Earth hydrosphere atmosphere system. Such a coordinate system is a requirement for studying long term eustatic sea level rise and other global change phenomena. Earth orientation parameters determined with the coordinate system have been produced in near real time operationally since 1983, at a relatively modest cost. The SLR ranging to Lageos has also provided a rich spectrum of results based upon the analysis of Lageos orbital dynamics. These include significant improvements in the knowledge of the mean and variable components of the Earth's gravity field and the Earth's gravitational parameter. The ability to measure the time variations of the Earth's gravity field has opened as exciting area of study in relating global processes, including meteorologically derived mass transport through changes in the satellite dynamics. New confirmation of general relativity was obtained using the Lageos SLR data.

Source record↗
DOE OSTI2024

Atomistic simulations to reveal HIP-bonding mechanisms of Al6061/Al6061

Molecular dynamics simulations were employed to understand the diffusion bonding process during hot isostatic pressing (HIP) of Al6061/Al6061 alloy. Simulations of the HIP process reveal atomistic phenomena that are difficult or unlikely to be observed experimentally and provide useful insights into the mechanism of diffusion and bonding. Here, the results reveal that at the start of the HIP process, a massive incursion of oxygen atoms occurs from the pre-existing γ-Al 2 O 3 to the 6061 region across the interphase interface. These oxygen atoms interact with the enriched Mg atom layer present at the existing γ-Al 2 O 3 and 6061 matrix to form a secondary complex Mg 2 Al 2 O 5 phase. Diffusion calculations also show that transport of atoms due to the applied pressure is 4–5 orders of magnitude higher than would occur in the absence of HIP conditions. The Mg 2 Al 2 O 5 phase also provides efficient pathways for the rapid transport of Mg atoms. Because of the higher diffusion coefficients observed for Mg within the phase, Mg atoms can move more swiftly compared to their diffusion within other phases such as γ-Al 2 O 3 . This accelerated mobility facilitates the rapid movement of Mg atoms across the interface, leading to changes in the local composition and the potential growth of the Mg 2 Al 2 O 5 phase.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Quantum Statistics of Vortices from a Dual Theory of the X Y Ferromagnet

In this work, we extend the well-known mapping between the easy-plane ferromagnet and electrostatics in d = 2 spatial dimensions to dynamical and quantum phenomena in a d = 2+1 spacetime. Ferromagnetic vortices behave like quantum particles with an electric charge equal to the vortex number and a magnetic flux equal to the transverse spin of the vortex core. Vortices with half-integer core spin exhibit fermionic statistics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Studying light–matter interactions and energy transfer at the nanoscale with a trapped–ion quantum computer

A grand challenge in materials sciences is to control energy transduction, transfer and dissipation at the nanoscale. Meeting this challenge requires progress in nanoscale fabrication and synthesis, but equally importantly, also progress in our understanding of how nanoscale structure influences these phenomena. Although detailed quantum mechanical models exist that capture the structure and physics of materials and molecular species, solving these models to calculate the relevant emergent phenomena, which often occur over vastly different time and energy scales, has so far proven difficult. In this project, we studied how to model energy transfer and light-matter interactions using trapped-ion quantum computers. Our studies focused on emulation of critical processes in natural systems, such as the well-known photosynthetic pigment-protein complexes responsible for capturing and transducing light to electrons. In addition, we implemented proof-of-principle experiments demonstrating that such calculations are possible on trapped-ion quantum computing hardware. These studies and experiments pave the way to investigate energy transport and transduction in a detail not accessible with classical computing technologies. We expect that our studies will allow to extract important guiding principles on how to improve the efficiency of nano-scale light-harvesting and transduction devices.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Hgi2 Sub 2 Crystal Growth for Nuclear Detectors

The objectives of this program are to obtain a benchmark quality sample grown at low-g conditions and to study vapor growth phenomena under space conditions. Ground-based crystals show a defect structure which impairs their performance as nuclear radiation detectors. These defects may be caused by the gravitational force acting on the crystal in its weakended state at the elevated growth temperature and by irregular convection patterns in the vapor during growth. Mechanical strength measurements have been performed (uniaxial compression tests) which show that the crystals exhibit slip parallel to the c-planes at stresses as low as 1/2 psi. Preliminary calculations using a simple linearized model indicate the oscillating instabilities in the convection part of the vapor transport system are unlikely, even at 1-g, provided that the utmost care is taken in the preparation of the crystal growth source material.

Schnepple, W. F.↗